=> Building devel/kodi-platform Started : Wednesday, 6 MAR 2019 at 23:05:22 UTC Platform: 5.5-DEVELOPMENT DragonFly v5.5.0.192.g15ae7f0-DEVELOPMENT #34: Tue Feb 19 09:07:07 PST 2019 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 -------------------------------------------------- -- Environment -------------------------------------------------- UNAME_r=5.5-SYNTH UNAME_m=x86_64 UNAME_p=x86_64 UNAME_v=DragonFly 5.5-SYNTH UNAME_s=DragonFly PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SSL_NO_VERIFY_PEER=1 TERM=dumb PKG_CACHEDIR=/var/cache/pkg8 PKG_DBDIR=/var/db/pkg8 PORTSDIR=/xports LANG=C HOME=/root USER=root -------------------------------------------------- -- Options -------------------------------------------------- -------------------------------------------------- -- CONFIGURE_ENV -------------------------------------------------- XDG_DATA_HOME=/construction/devel/kodi-platform XDG_CONFIG_HOME=/construction/devel/kodi-platform HOME=/construction/devel/kodi-platform TMPDIR="/tmp" PATH=/construction/devel/kodi-platform/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc80 -------------------------------------------------- -- CONFIGURE_ARGS -------------------------------------------------- -------------------------------------------------- -- MAKE_ENV -------------------------------------------------- XDG_DATA_HOME=/construction/devel/kodi-platform XDG_CONFIG_HOME=/construction/devel/kodi-platform HOME=/construction/devel/kodi-platform TMPDIR="/tmp" PATH=/construction/devel/kodi-platform/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc80 PREFIX=/usr/local LOCALBASE=/usr/local NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing " CPP="cpp" CPPFLAGS="" LDFLAGS=" " LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" -------------------------------------------------- -- MAKE_ARGS -------------------------------------------------- DESTDIR=/construction/devel/kodi-platform/stage -------------------------------------------------- -- PLIST_SUB -------------------------------------------------- CMAKE_BUILD_TYPE="release" OSREL=5.5 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/kodi-platform" EXAMPLESDIR="share/examples/kodi-platform" DATADIR="share/kodi-platform" WWWDIR="www/kodi-platform" ETCDIR="etc/kodi-platform" -------------------------------------------------- -- SUB_LIST -------------------------------------------------- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/kodi-platform DOCSDIR=/usr/local/share/doc/kodi-platform EXAMPLESDIR=/usr/local/share/examples/kodi-platform WWWDIR=/usr/local/www/kodi-platform ETCDIR=/usr/local/etc/kodi-platform -------------------------------------------------- -- /etc/make.conf -------------------------------------------------- SYNTHPROFILE=Release-BE USE_PACKAGE_DEPENDS_ONLY=yes PACKAGE_BUILDING=yes BATCH=yes PKG_CREATE_VERBOSE=yes PORTSDIR=/xports DISTDIR=/distfiles WRKDIRPREFIX=/construction PORT_DBDIR=/options PACKAGES=/packages MAKE_JOBS_NUMBER_LIMIT=5 LICENSES_ACCEPTED= NONE HAVE_COMPAT_IA32_KERN= CONFIGURE_MAX_CMD_LEN=262144 _PERL5_FROM_BIN=5.26.2 _ALTCCVERSION_921dbbb2=none _OBJC_ALTCCVERSION_921dbbb2=none _SMP_CPUS=8 UID=0 ARCH=x86_64 OPSYS=DragonFly DFLYVERSION=500500 OSVERSION=9999999 OSREL=5.5 _OSRELEASE=5.5-SYNTH PYTHONBASE=/usr/local _PKG_CHECKED=1 -------------------------------------------------------------------------------- -- Phase: check-sanity -------------------------------------------------------------------------------- ===> License GPLv2+ accepted by the user -------------------------------------------------------------------------------- -- Phase: pkg-depends -------------------------------------------------------------------------------- ===> kodi-platform-20180302 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.10.5_5.txz Installing pkg-1.10.5_5... Extracting pkg-1.10.5_5: .......... done ===> kodi-platform-20180302 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of kodi-platform-20180302 -------------------------------------------------------------------------------- -- Phase: fetch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: fetch -------------------------------------------------------------------------------- ===> License GPLv2+ accepted by the user ===> Fetching all distfiles required by kodi-platform-20180302 for building -------------------------------------------------------------------------------- -- Phase: checksum -------------------------------------------------------------------------------- ===> License GPLv2+ accepted by the user ===> Fetching all distfiles required by kodi-platform-20180302 for building => SHA256 Checksum OK for xbmc-kodi-platform-20180302-e8574b8_GH0.tar.gz. -------------------------------------------------------------------------------- -- Phase: extract-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: extract -------------------------------------------------------------------------------- ===> License GPLv2+ accepted by the user ===> Fetching all distfiles required by kodi-platform-20180302 for building ===> Extracting for kodi-platform-20180302 => SHA256 Checksum OK for xbmc-kodi-platform-20180302-e8574b8_GH0.tar.gz. -------------------------------------------------------------------------------- -- Phase: patch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: patch -------------------------------------------------------------------------------- ===> Patching for kodi-platform-20180302 -------------------------------------------------------------------------------- -- Phase: build-depends -------------------------------------------------------------------------------- ===> kodi-platform-20180302 depends on file: /usr/local/lib/kodi/KodiConfig.cmake - not found ===> Installing existing package /packages/All/kodi-17.6_8.txz Installing kodi-17.6_8... `-- Installing atk-2.28.1... | `-- Installing gettext-runtime-0.19.8.1_2... | | `-- Installing indexinfo-0.3.1... | | `-- Extracting indexinfo-0.3.1: .... done | `-- Extracting gettext-runtime-0.19.8.1_2: .......... done | `-- Installing glib-2.56.3_3,1... | | `-- Installing libffi-3.2.1_3... | | `-- Extracting libffi-3.2.1_3: .......... done | | `-- Installing libiconv-1.14_11... | | `-- Extracting libiconv-1.14_11: .......... done | | `-- Installing libxml2-2.9.8... | | `-- Extracting libxml2-2.9.8: .......... done | | `-- Installing pcre-8.42_1... | | `-- Extracting pcre-8.42_1: .......... done | | `-- Installing python27-2.7.15... | | `-- Installing expat-2.2.6_1... | | `-- Extracting expat-2.2.6_1: .......... done | | `-- Installing libressl-2.8.3... | | `-- Extracting libressl-2.8.3: .......... done | | `-- Installing ncurses-6.1.20190112... | | `-- Extracting ncurses-6.1.20190112: .......... done | | `-- Installing readline-7.0.5... | | `-- Extracting readline-7.0.5: .......... done | | `-- Extracting python27-2.7.15: .......... done | `-- Extracting glib-2.56.3_3,1: .......... done No schema files found: doing nothing. `-- Extracting atk-2.28.1: .......... done `-- Installing avahi-app-0.7_2... | `-- Installing dbus-1.12.12... | | `-- Installing libICE-1.0.9_3,1... | | `-- Extracting libICE-1.0.9_3,1: .......... done | | `-- Installing libSM-1.2.3,1... | | `-- Extracting libSM-1.2.3,1: .......... done | | `-- Installing libX11-1.6.7,1... | | `-- Installing libXau-1.0.8_5... | | `-- Extracting libXau-1.0.8_5: .......... done | | `-- Installing libXdmcp-1.1.2_2... | | | `-- Installing xorgproto-2018.4... | | | `-- Extracting xorgproto-2018.4: .......... done | | `-- Extracting libXdmcp-1.1.2_2: ......... done | | `-- Installing libxcb-1.13.1... | | | `-- Installing libpthread-stubs-0.4... | | | `-- Extracting libpthread-stubs-0.4: .... done | | `-- Extracting libxcb-1.13.1: .......... done | | `-- Extracting libX11-1.6.7,1: .......... done ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | `-- Extracting dbus-1.12.12: ......... done | `-- Installing dbus-glib-0.110... | `-- Extracting dbus-glib-0.110: .......... done | `-- Installing gdbm-1.18.1... | `-- Extracting gdbm-1.18.1: .......... done | `-- Installing gnome_subr-1.0... | `-- Extracting gnome_subr-1.0: .... done | `-- Installing gobject-introspection-1.56.1,1... | | `-- Installing python36-3.6.8... | | `-- Extracting python36-3.6.8: .......... done | `-- Extracting gobject-introspection-1.56.1,1: .......... done | `-- Installing libdaemon-0.14_1... | `-- Extracting libdaemon-0.14_1: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. `-- Extracting avahi-app-0.7_2: .......... done `-- Installing curl-7.64.0_1... | `-- Installing ca_root_nss-3.42.1... | `-- Extracting ca_root_nss-3.42.1: ........ done | `-- Installing krb5-1.17_1... | `-- Extracting krb5-1.17_1: .......... done | `-- Installing libnghttp2-1.36.0... | `-- Extracting libnghttp2-1.36.0: .......... done `-- Extracting curl-7.64.0_1: .......... done `-- Installing e2fsprogs-libuuid-1.44.5_1... `-- Extracting e2fsprogs-libuuid-1.44.5_1: .......... done `-- Installing enca-1.19... | `-- Installing p5-Unicode-Map8-0.13_1... | | `-- Installing p5-Unicode-String-2.10... | | `-- Installing perl5-5.28.1... | | `-- Extracting perl5-5.28.1: .......... done | | `-- Extracting p5-Unicode-String-2.10: .......... done | `-- Extracting p5-Unicode-Map8-0.13_1: .......... done | `-- Installing recode-3.6_14... | `-- Extracting recode-3.6_14: .......... done `-- Extracting enca-1.19: .......... done `-- Installing flac-1.3.2... | `-- Installing libogg-1.3.3,4... | `-- Extracting libogg-1.3.3,4: .......... done `-- Extracting flac-1.3.2: .......... done `-- Installing fontconfig-2.12.6,1... | `-- Installing freetype2-2.9.1... | `-- Extracting freetype2-2.9.1: .......... done `-- Extracting fontconfig-2.12.6,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded `-- Installing fribidi-0.19.7... `-- Extracting fribidi-0.19.7: .......... done `-- Installing gdk-pixbuf2-2.36.12... | `-- Installing jpeg-turbo-2.0.2... | `-- Extracting jpeg-turbo-2.0.2: .......... done | `-- Installing png-1.6.36... | `-- Extracting png-1.6.36: .......... done | `-- Installing shared-mime-info-1.10... | `-- Extracting shared-mime-info-1.10: .......... done | `-- Installing tiff-4.0.10... | | `-- Installing jbigkit-2.1_1... | | `-- Extracting jbigkit-2.1_1: .......... done | `-- Extracting tiff-4.0.10: .......... done `-- Extracting gdk-pixbuf2-2.36.12: .......... done `-- Installing glew-2.1.0... | `-- Installing libGLU-9.0.0_3... | | `-- Installing mesa-libs-18.3.2... | | `-- Installing libXdamage-1.1.4_5... | | | `-- Installing libXfixes-5.0.3_2... | | | `-- Extracting libXfixes-5.0.3_2: .......... done | | `-- Extracting libXdamage-1.1.4_5: ......... done | | `-- Installing libXext-1.3.3_3,1... | | `-- Extracting libXext-1.3.3_3,1: .......... done | | `-- Installing libXrandr-1.5.1_2... | | | `-- Installing libXrender-0.9.10_2... | | | `-- Extracting libXrender-0.9.10_2: .......... done | | `-- Extracting libXrandr-1.5.1_2: .......... done | | `-- Installing libXxf86vm-1.1.4_3... | | `-- Extracting libXxf86vm-1.1.4_3: .......... done | | `-- Installing libdrm-2.4.96,1... | | | `-- Installing libpciaccess-0.13.5... | | | `-- Installing pciids-20190213... | | | `-- Extracting pciids-20190213: ..... done | | | `-- Extracting libpciaccess-0.13.5: ......... done | | `-- Extracting libdrm-2.4.96,1: .......... done | | `-- Installing libelf-0.8.13_3... | | `-- Extracting libelf-0.8.13_3: .......... done | | `-- Installing libxshmfence-1.2_4... | | `-- Extracting libxshmfence-1.2_4: ......... done | | `-- Installing wayland-1.16.0... | | `-- Extracting wayland-1.16.0: .......... done | | `-- Extracting mesa-libs-18.3.2: .......... done | `-- Extracting libGLU-9.0.0_3: ...... done | `-- Installing libXi-1.7.9_2,1... | `-- Extracting libXi-1.7.9_2,1: .......... done | `-- Installing libXmu-1.1.2_5,1... | | `-- Installing libXt-1.1.5_2,1... | | `-- Extracting libXt-1.1.5_2,1: .......... done | `-- Extracting libXmu-1.1.2_5,1: .......... done `-- Extracting glew-2.1.0: .......... done `-- Installing gmp-6.1.2_1... `-- Extracting gmp-6.1.2_1: .......... done `-- Installing gnutls-3.6.6_2... | `-- Installing libidn2-2.1.1... | | `-- Installing libunistring-0.9.10_1... | | `-- Extracting libunistring-0.9.10_1: .......... done | `-- Extracting libidn2-2.1.1: .......... done | `-- Installing libtasn1-4.13_1... | `-- Extracting libtasn1-4.13_1: .......... done | `-- Installing nettle-3.4.1_1... | `-- Extracting nettle-3.4.1_1: .......... done | `-- Installing p11-kit-0.23.15... | `-- Extracting p11-kit-0.23.15: .......... done | `-- Installing trousers-0.3.14_2... | | `-- Installing tpm-emulator-0.7.4_2... ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting tpm-emulator-0.7.4_2: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | `-- Extracting trousers-0.3.14_2: .......... done `-- Extracting gnutls-3.6.6_2: .......... done `-- Installing gtk-update-icon-cache-2.24.32... | `-- Installing hicolor-icon-theme-0.17... | `-- Extracting hicolor-icon-theme-0.17: . done | `-- Installing libXcomposite-0.4.4_5,1... | `-- Extracting libXcomposite-0.4.4_5,1: .......... done | `-- Installing libXcursor-1.1.15_2... | `-- Extracting libXcursor-1.1.15_2: .......... done | `-- Installing libXinerama-1.1.4_2,1... | `-- Extracting libXinerama-1.1.4_2,1: .......... done | `-- Installing pango-1.42.4_1... | | `-- Installing cairo-1.15.12,2... | | `-- Installing pixman-0.34.0_1... | | `-- Extracting pixman-0.34.0_1: .......... done | | `-- Installing xcb-util-renderutil-0.3.9_1... | | | `-- Installing xcb-util-0.4.0_2,1... | | | `-- Extracting xcb-util-0.4.0_2,1: .......... done | | `-- Extracting xcb-util-renderutil-0.3.9_1: ......... done | | `-- Extracting cairo-1.15.12,2: .......... done | | `-- Installing encodings-1.0.4_4,1... | | `-- Installing font-util-1.3.1... | | `-- Extracting font-util-1.3.1: .......... done | | `-- Extracting encodings-1.0.4_4,1: .......... done | | `-- Installing harfbuzz-2.3.1... | | `-- Installing graphite2-1.3.13... | | `-- Extracting graphite2-1.3.13: .......... done | | `-- Extracting harfbuzz-2.3.1: .......... done | | `-- Installing libXft-2.3.2_3... | | `-- Extracting libXft-2.3.2_3: .......... done | | `-- Installing xorg-fonts-truetype-7.7_1... | | `-- Installing dejavu-2.37... | | | `-- Installing mkfontdir-1.0.7... | | | `-- Installing mkfontscale-1.1.3_2... | | | | `-- Installing libfontenc-1.1.4... | | | | `-- Extracting libfontenc-1.1.4: ......... done | | | `-- Extracting mkfontscale-1.1.3_2: ..... done | | | `-- Extracting mkfontdir-1.0.7: ..... done | | `-- Extracting dejavu-2.37: .......... done | | `-- Installing font-bh-ttf-1.0.3_3... | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | `-- Installing font-misc-ethiopic-1.0.3_3... | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | `-- Installing font-misc-meltho-1.0.3_3... | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done | `-- Extracting pango-1.42.4_1: .......... done `-- Extracting gtk-update-icon-cache-2.24.32: .... done `-- Installing jasper-1.900.1_17... `-- Extracting jasper-1.900.1_17: .......... done `-- Installing libXtst-1.2.3_2... `-- Extracting libXtst-1.2.3_2: .......... done `-- Installing libass-0.14.0... `-- Extracting libass-0.14.0: .......... done `-- Installing libcdio-2.0.0_1... | `-- Installing libcddb-1.3.2_4... | `-- Extracting libcddb-1.3.2_4: .......... done `-- Extracting libcdio-2.0.0_1: .......... done `-- Installing libcec-4.0.2_6... | `-- Installing p8-platform-2.1.0.1_1... | `-- Extracting p8-platform-2.1.0.1_1: .......... done `-- Extracting libcec-4.0.2_6: .......... done `-- Installing libcrossguid-20150803_5... `-- Extracting libcrossguid-20150803_5: ....... done `-- Installing libdcadec-0.2.0_1... `-- Extracting libdcadec-0.2.0_1: .......... done `-- Installing libgcrypt-1.8.4_1... | `-- Installing libgpg-error-1.35... | `-- Extracting libgpg-error-1.35: .......... done `-- Extracting libgcrypt-1.8.4_1: .......... done `-- Installing libidn-1.34_1... `-- Extracting libidn-1.34_1: .......... done `-- Installing libinotify-20180201_1... `-- Extracting libinotify-20180201_1: .......... done `-- Installing libltdl-2.4.6... `-- Extracting libltdl-2.4.6: .......... done `-- Installing libmicrohttpd-0.9.58_2... `-- Extracting libmicrohttpd-0.9.58_2: .......... done `-- Installing libmodplug-0.8.9.0... `-- Extracting libmodplug-0.8.9.0: .......... done `-- Installing libmpeg2-0.5.1_6... `-- Extracting libmpeg2-0.5.1_6: .......... done `-- Installing libnfs-3.0.0... `-- Extracting libnfs-3.0.0: .......... done `-- Installing libplist-1.12... `-- Extracting libplist-1.12: .......... done `-- Installing librtmp-2.4.20151223_3... `-- Extracting librtmp-2.4.20151223_3: .......... done `-- Installing libsamplerate-0.1.9... | `-- Installing libsndfile-1.0.28_1... | | `-- Installing libvorbis-1.3.6,3... | | `-- Extracting libvorbis-1.3.6,3: .......... done | `-- Extracting libsndfile-1.0.28_1: .......... done `-- Extracting libsamplerate-0.1.9: .......... done `-- Installing libssh-0.8.6... `-- Extracting libssh-0.8.6: .......... done `-- Installing libva-2.4.0... `-- Extracting libva-2.4.0: .......... done `-- Installing libvdpau-1.1.1_2... `-- Extracting libvdpau-1.1.1_2: .......... done `-- Installing libxslt-1.1.32... `-- Extracting libxslt-1.1.32: .......... done `-- Installing lirc-0.9.0_10,1... | `-- Installing libftdi-0.20_13... | | `-- Installing boost-libs-1.69.0_1... | | `-- Installing icu-63.1_1,1... | | `-- Extracting icu-63.1_1,1: .......... done | | `-- Extracting boost-libs-1.69.0_1: .......... done | `-- Extracting libftdi-0.20_13: .......... done | `-- Installing libirman-0.5.2... | `-- Extracting libirman-0.5.2: .......... done `-- Extracting lirc-0.9.0_10,1: .......... done `-- Installing lzo2-2.10_1... `-- Extracting lzo2-2.10_1: .......... done `-- Installing mesa-demos-8.4.0_2... | `-- Installing freeglut-3.0.0_2... | `-- Extracting freeglut-3.0.0_2: .......... done `-- Extracting mesa-demos-8.4.0_2: .......... done `-- Installing mysql56-client-5.6.43... | `-- Installing libedit-3.1.20181209_2,1... | `-- Extracting libedit-3.1.20181209_2,1: .......... done | `-- Installing libevent-2.1.8_2... | `-- Extracting libevent-2.1.8_2: .......... done | `-- Installing liblz4-1.8.3,1... | `-- Extracting liblz4-1.8.3,1: .......... done `-- Extracting mysql56-client-5.6.43: .......... done `-- Installing py27-sqlite3-2.7.15_7... | `-- Installing py27-setuptools-40.8.0... | `-- Extracting py27-setuptools-40.8.0: .......... done | `-- Installing sqlite3-3.27.1... | `-- Extracting sqlite3-3.27.1: .......... done `-- Extracting py27-sqlite3-2.7.15_7: ........ done `-- Installing samba47-4.7.12... | `-- Installing cmocka-1.1.1_1... | `-- Extracting cmocka-1.1.1_1: .......... done | `-- Installing gamin-0.1.10_10... | `-- Extracting gamin-0.1.10_10: .......... done | `-- Installing jansson-2.12... | `-- Extracting jansson-2.12: .......... done | `-- Installing libarchive-3.3.3,1... | `-- Extracting libarchive-3.3.3,1: .......... done | `-- Installing popt-1.16_2... | `-- Extracting popt-1.16_2: .......... done | `-- Installing py27-dnspython-1.15.0... | `-- Extracting py27-dnspython-1.15.0: .......... done | `-- Installing py27-iso8601-0.1.11... | `-- Extracting py27-iso8601-0.1.11: .......... done | `-- Installing talloc-2.1.14... | `-- Extracting talloc-2.1.14: .......... done | `-- Installing tdb-1.3.16,1... | `-- Extracting tdb-1.3.16,1: .......... done | `-- Installing tevent-0.9.37... | `-- Extracting tevent-0.9.37: .......... done `-- Extracting samba47-4.7.12: .......... done `-- Installing sdl-1.2.15_13,2... | `-- Installing aalib-1.4.r5_13... | `-- Extracting aalib-1.4.r5_13: .......... done `-- Extracting sdl-1.2.15_13,2: .......... done `-- Installing sdl2-2.0.9_2... | `-- Installing libXScrnSaver-1.2.3_2... | `-- Extracting libXScrnSaver-1.2.3_2: .......... done | `-- Installing libxkbcommon-0.8.0_1... | | `-- Installing xkeyboard-config-2.24_1... | | `-- Extracting xkeyboard-config-2.24_1: .......... done | `-- Extracting libxkbcommon-0.8.0_1: .......... done `-- Extracting sdl2-2.0.9_2: .......... done `-- Installing sdl_image-1.2.12_11... | `-- Installing webp-1.0.2... | | `-- Installing giflib-5.1.4... | | `-- Extracting giflib-5.1.4: .......... done | `-- Extracting webp-1.0.2: .......... done `-- Extracting sdl_image-1.2.12_11: .......... done `-- Installing shairplay-0.9.0.20150921... | `-- Installing libao-1.2.0_4... | `-- Extracting libao-1.2.0_4: .......... done | `-- Installing mDNSResponder-878.200.35... | `-- Extracting mDNSResponder-878.200.35: .......... done `-- Extracting shairplay-0.9.0.20150921: .......... done `-- Installing taglib-1.11.1_2... `-- Extracting taglib-1.11.1_2: .......... done `-- Installing tinyxml-2.6.2_3... `-- Extracting tinyxml-2.6.2_3: .......... done `-- Installing xdpyinfo-1.3.2_2... | `-- Installing libXxf86dga-1.1.4_5... | `-- Extracting libXxf86dga-1.1.4_5: .......... done | `-- Installing libXxf86misc-1.0.4_2... | `-- Extracting libXxf86misc-1.0.4_2: .......... done | `-- Installing libdmx-1.1.4_2... | `-- Extracting libdmx-1.1.4_2: .......... done `-- Extracting xdpyinfo-1.3.2_2: ..... done `-- Installing yajl-2.1.0... `-- Extracting yajl-2.1.0: .......... done Extracting kodi-17.6_8: .......... done Message from python27-2.7.15: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== Message from python36-3.6.8: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py36-gdbm databases/py-gdbm@py36 py36-sqlite3 databases/py-sqlite3@py36 py36-tkinter x11-toolkits/py-tkinter@py36 =========================================================================== Message from ca_root_nss-3.42.1: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from perl5-5.28.1: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Message from freetype2-2.9.1: The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/ft2-toc.html, if documentation was installed). Message from trousers-0.3.14_2: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Message from dejavu-2.37: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from libcec-4.0.2_6: WARNING: You need write permissions on the USB device to make it work properly. Consider adding your user to the operator group: % pw groupmod operator -m jerry and adding a rule in /etc/devfs.rules like this one: [system=10] add path 'ttyU*' mode 0660 group operator To load this new rule add the following to /etc/rc.conf: devfs_system_ruleset="system" Then restart devfs to load the new rule: % service devfs restart ===> NOTICE: The libcec port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from libinotify-20180201_1: ============================================================================ Libinotify functionality on FreeBSD is missing support for - detecting a file being moved into or out of a directory within the same filesystem - certain modifications to a symbolic link (rather than the file it points to.) in addition to the known limitations on all platforms using kqueue(2) where various open and close notifications are unimplemented. This means the following regression tests will fail: Directory notifications: IN_MOVED_FROM IN_MOVED_TO Open/close notifications: IN_OPEN IN_CLOSE_NOWRITE IN_CLOSE_WRITE Symbolic Link notifications: IN_DONT_FOLLOW IN_ATTRIB IN_MOVE_SELF IN_DELETE_SELF Kernel patches to address the missing directory and symbolic link notifications are available from: https://github.com/libinotify-kqueue/libinotify-kqueue/tree/master/patches ============================================================================= You might want to consider increasing the kern.maxfiles tunable if you plan to use this library for applications that need to monitor activity of a lot of files. ============================================================================= Message from libplist-1.12: ===> NOTICE: The libplist port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from boost-libs-1.69.0_1: You have built the Boost library with thread support. Don't forget to add -pthread to your linker options when linking your code. Message from libftdi-0.20_13: ===> NOTICE: The libftdi port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from lirc-0.9.0_10,1: ********************************************************************** This port does not contain any FreeBSD device drivers for infrared devices. This port installs the LIRC daemons and tools for interacting with drivers that support the LIRC device interface. You will need to obtain third party device drivers or port the Linux drivers in ${WRKSRC}/drivers to use the LIRC port. Update for 0.9: Known working with this update are FTDI-based USB IR receivers/transmitters like described here, http://www.huitsing.nl/irftdi/ and if you use the recent multimedia/webcamd port then MCE USB based ones driven by the Linux mceusb driver as well remotes coming with USB DVB tuners that by default work with the Linux drivers used in webcamd should also work, i.e. if webcamd creates a /dev/lircX device node check if e.g. mode2 -d /dev/lirc0 reports pulses and spaces when triggering the remote at the receiver, if it does you probably will be able to use lirc. Some other userland drivers will probably also work (like others using libusb), they just were not tested. The lirc documentation should be accessible at: /usr/local/share/doc/lirc/html/index.html Some example configs should have been installed here: /usr/local/share/examples/lirc/remotes The port now installs an example lircd.conf that's preconfigured for use with webcamd, either with USB DVB tuner remotes supported by the Linux drivers by default that webcamd uses, or for remotes supplied with MCE USB IR receivers. If you want to create a config for a different remote using an IR receiver that works with mode2 you can try using irrecord like described here: file:///usr/local/share/doc/lirc/html/help.html#new_remote Update for webcamd >= 3.0.0.1: webcamd 3.0.0.1 now supports /dev/input/eventX (X there can be for example 0, 8, 16 etc) and uses it exclusively for almost all tuners, only mceusb IR-only devices now support both interfaces. So if you don't get a /dev/lircX device node anymore and want to make lirc use a remote with such a tuner you now need the lirc devinput driver, if you start lircd via the rc.d script set lircd_flags and lircd_device in rc.conf(5), like: lircd_flags="-H devinput" lircd_device="/dev/input/event0" The example lircd.conf includes the devinput config file too so if all goes well irw(1) should still work with such tuners and show buttons pressed, and if not and the tuner's Linux driver uses the rc.core interface you can often still add a custom keymap, only with devinput you no longer want to use irrecord(1) but ir-keytable(1) which is part of the multimedia/v4l-utils port. Using that tool you can e.g. check remote events coming in on /dev/input/eventX, ir-keytable -d /dev/input/eventX -t list the current keytable, ir-keytable -d /dev/input/eventX -r or add scancodes on the fly by loading a custom keymap, ir-keytable -d /dev/input/eventX -w keymap.txt (on Linux this can be automated using udev, don't know if we need something like that also...) Some (Linux-centric, so not all of them apply) notes re ir-keytable(1) and the lirc devinput change are also here: http://forum.xbmc.org/showthread.php?t=101151 ********************************************************************** ===> NOTICE: The lirc port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from freeglut-3.0.0_2: Joystick support is untested and it is unknown if it works. Do not hesitate to contact x11@FreeBSD.org if this causes issues. Message from mysql56-client-5.6.43: * * * * * * * * * * * * * * * * * * * * * * * * Please be aware the database client is vulnerable to CVE-2015-3152 - SSL Downgrade aka "BACKRONYM". You may find more information at the following URL: http://www.vuxml.org/freebsd/36bd352d-299b-11e5-86ff-14dae9d210b8.html Although this database client is not listed as "affected", it is vulnerable and will not be receiving a patch. Please take note of this when deploying this software. * * * * * * * * * * * * * * * * * * * * * * * * Message from cmocka-1.1.1_1: ================================================================= For more information on using cmocka, see https://api.cmocka.org ================================================================= Message from gamin-0.1.10_10: =============================================================================== Gamin will only provide realtime notification of changes for at most n files, where n is the minimum value between (kern.maxfiles * 0.7) and (kern.maxfilesperproc - 200). Beyond that limit, files will be polled. If you often open several large folders with Nautilus, you might want to increase the kern.maxfiles tunable (you do not need to set kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles). The behavior of gamin can be controlled via the various gaminrc files. See http://www.gnome.org/~veillard/gamin/config.html on how to create these files. In particular, if you find gam_server is taking up too much CPU time polling for changes, something like the following may help in one of the gaminrc files: # reduce polling frequency to once per 10 seconds # for UFS file systems in order to lower CPU load fsset ufs poll 10 =============================================================================== ===> NOTICE: The gamin port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from samba47-4.7.12: =============================================================================== How to start: http://wiki.samba.org/index.php/Samba4/HOWTO * Your configuration is: /usr/local/etc/smb4.conf * All the relevant databases are under: /var/db/samba4 * All the logs are under: /var/log/samba4 * Provisioning script is: /usr/local/bin/samba-tool For additional documentation check: http://wiki.samba.org/index.php/Samba4 Bug reports should go to the: https://bugzilla.samba.org/ =============================================================================== Message from aalib-1.4.r5_13: ===> NOTICE: The aalib port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from sdl-1.2.15_13,2: ------------------------------------------------------------------------------ Your SDL library has been built with libvgl support, which means that you can run almost any SDL application straight on your console (VESA 2.0 compatible videocard is required). To do this you have to load the vesa kernel module or enable it in your kernel, and set environment variable "SDL_VIDEODRIVER=vgl". ------------------------------------------------------------------------------ Message from tinyxml-2.6.2_3: ===> NOTICE: The tinyxml port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> kodi-platform-20180302 depends on file: /usr/local/lib/kodi/KodiConfig.cmake - found ===> Returning to build of kodi-platform-20180302 ===> kodi-platform-20180302 depends on file: /usr/local/bin/cmake - not found ===> Installing existing package /packages/All/cmake-3.13.4.txz Installing cmake-3.13.4... `-- Installing jsoncpp-1.8.1_5... `-- Extracting jsoncpp-1.8.1_5: .......... done `-- Installing libuv-1.26.0... `-- Extracting libuv-1.26.0: .......... done `-- Installing rhash-1.3.5... `-- Extracting rhash-1.3.5: .......... done Extracting cmake-3.13.4: .......... done ===> kodi-platform-20180302 depends on file: /usr/local/bin/cmake - found ===> Returning to build of kodi-platform-20180302 -------------------------------------------------------------------------------- -- Phase: lib-depends -------------------------------------------------------------------------------- ===> kodi-platform-20180302 depends on shared library: libtinyxml.so - found (/usr/local/lib/libtinyxml.so) ===> kodi-platform-20180302 depends on shared library: libp8-platform.so - found (/usr/local/lib/libp8-platform.so) -------------------------------------------------------------------------------- -- Phase: configure -------------------------------------------------------------------------------- ===> Configuring for kodi-platform-20180302 ===> Performing out-of-source build /bin/mkdir -p /construction/devel/kodi-platform/.build -- The C compiler identification is GNU 8.1.0 -- The CXX compiler identification is GNU 8.1.0 -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done -- Checking to see if CXX compiler accepts flag -flto -- Checking to see if CXX compiler accepts flag -flto - yes -- Found TinyXML: /usr/local/include -- Looking for pthread.h -- Looking for pthread.h - found -- Found Threads: TRUE -- Looking for __atomic_fetch_add_4 in atomic -- Looking for __atomic_fetch_add_4 in atomic - not found -- Performing Test HAS_BUILTIN_SYNC_ADD_AND_FETCH -- Performing Test HAS_BUILTIN_SYNC_ADD_AND_FETCH - Success -- Performing Test HAS_BUILTIN_SYNC_SUB_AND_FETCH -- Performing Test HAS_BUILTIN_SYNC_SUB_AND_FETCH - Success -- Performing Test HAS_BUILTIN_SYNC_VAL_COMPARE_AND_SWAP -- Performing Test HAS_BUILTIN_SYNC_VAL_COMPARE_AND_SWAP - Success -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: CMAKE_CXX_FLAGS_DEBUG CMAKE_C_FLAGS_DEBUG CMAKE_C_FLAGS_RELEASE CMAKE_EXE_LINKER_FLAGS CMAKE_MODULE_LINKER_FLAGS -- Build files have been written to: /construction/devel/kodi-platform/.build -------------------------------------------------------------------------------- -- Phase: build -------------------------------------------------------------------------------- ===> Building for kodi-platform-20180302 /usr/local/bin/cmake -S/construction/devel/kodi-platform/kodi-platform-e8574b8 -B/construction/devel/kodi-platform/.build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/local/bin/cmake -E cmake_progress_start /construction/devel/kodi-platform/.build/CMakeFiles /construction/devel/kodi-platform/.build/CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all --- CMakeFiles/kodiplatform.dir/all --- /usr/bin/make -f CMakeFiles/kodiplatform.dir/build.make CMakeFiles/kodiplatform.dir/depend --- CMakeFiles/kodiplatform.dir/depend --- cd /construction/devel/kodi-platform/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/devel/kodi-platform/kodi-platform-e8574b8 /construction/devel/kodi-platform/kodi-platform-e8574b8 /construction/devel/kodi-platform/.build /construction/devel/kodi-platform/.build /construction/devel/kodi-platform/.build/CMakeFiles/kodiplatform.dir/DependInfo.cmake Scanning dependencies of target kodiplatform /usr/bin/make -f CMakeFiles/kodiplatform.dir/build.make CMakeFiles/kodiplatform.dir/build --- CMakeFiles/kodiplatform.dir/src/util/XMLUtils.cpp.o --- [ 33%] Building CXX object CMakeFiles/kodiplatform.dir/src/util/XMLUtils.cpp.o /usr/bin/c++ -DBUILD_KODI_ADDON -Dkodiplatform_EXPORTS -I/usr/local/include -I/usr/local/include/kodi -I/usr/local/include/p8-platform -fPIC -pipe -O2 -fno-strict-aliasing -fPIC -DTARGET_POSIX -DTARGET_DRAGONFLY -D_LINUX -o CMakeFiles/kodiplatform.dir/src/util/XMLUtils.cpp.o -c /construction/devel/kodi-platform/kodi-platform-e8574b8/src/util/XMLUtils.cpp --- libkodiplatform.so.17.6.0 --- [ 66%] Linking CXX shared library libkodiplatform.so /usr/local/bin/cmake -E cmake_link_script CMakeFiles/kodiplatform.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -fPIC -pipe -O2 -fno-strict-aliasing -shared -Wl,-soname,libkodiplatform.so.17.0 -o libkodiplatform.so.17.6.0 CMakeFiles/kodiplatform.dir/src/util/XMLUtils.cpp.o -Wl,-rpath,/usr/local/lib -pthread /usr/local/lib/libtinyxml.so -L/usr/local/lib -lp8-platform -pthread /usr/local/bin/cmake -E cmake_symlink_library libkodiplatform.so.17.6.0 libkodiplatform.so.17.0 libkodiplatform.so [100%] Built target kodiplatform /usr/local/bin/cmake -E cmake_progress_start /construction/devel/kodi-platform/.build/CMakeFiles 0 -------------------------------------------------------------------------------- -- Phase: run-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: stage -------------------------------------------------------------------------------- ===> Staging for kodi-platform-20180302 ===> Generating temporary packing list /usr/local/bin/cmake -S/construction/devel/kodi-platform/kodi-platform-e8574b8 -B/construction/devel/kodi-platform/.build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/local/bin/cmake -E cmake_progress_start /construction/devel/kodi-platform/.build/CMakeFiles /construction/devel/kodi-platform/.build/CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all /usr/bin/make -f CMakeFiles/kodiplatform.dir/build.make CMakeFiles/kodiplatform.dir/depend cd /construction/devel/kodi-platform/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/devel/kodi-platform/kodi-platform-e8574b8 /construction/devel/kodi-platform/kodi-platform-e8574b8 /construction/devel/kodi-platform/.build /construction/devel/kodi-platform/.build /construction/devel/kodi-platform/.build/CMakeFiles/kodiplatform.dir/DependInfo.cmake /usr/bin/make -f CMakeFiles/kodiplatform.dir/build.make CMakeFiles/kodiplatform.dir/build [100%] Built target kodiplatform /usr/local/bin/cmake -E cmake_progress_start /construction/devel/kodi-platform/.build/CMakeFiles 0 /usr/bin/make -f CMakeFiles/Makefile2 preinstall /usr/bin/make -f CMakeFiles/kodiplatform.dir/build.make CMakeFiles/kodiplatform.dir/preinstall Linking CXX shared library CMakeFiles/CMakeRelink.dir/libkodiplatform.so /usr/local/bin/cmake -E cmake_link_script CMakeFiles/kodiplatform.dir/relink.txt --verbose=1 /usr/bin/c++ -fPIC -fPIC -pipe -O2 -fno-strict-aliasing -shared -Wl,-soname,libkodiplatform.so.17.0 -o CMakeFiles/CMakeRelink.dir/libkodiplatform.so.17.6.0 CMakeFiles/kodiplatform.dir/src/util/XMLUtils.cpp.o -Wl,-rpath,/usr/local/lib -pthread /usr/local/lib/libtinyxml.so -L/usr/local/lib -lp8-platform -pthread /usr/local/bin/cmake -E cmake_symlink_library CMakeFiles/CMakeRelink.dir/libkodiplatform.so.17.6.0 CMakeFiles/CMakeRelink.dir/libkodiplatform.so.17.0 CMakeFiles/CMakeRelink.dir/libkodiplatform.so Installing the project stripped... /usr/local/bin/cmake -DCMAKE_INSTALL_DO_STRIP=1 -P cmake_install.cmake -- Install configuration: "Release" -- Installing: /construction/devel/kodi-platform/stage/usr/local/lib/libkodiplatform.so.17.6.0 -- Installing: /construction/devel/kodi-platform/stage/usr/local/lib/libkodiplatform.so.17.0 -- Installing: /construction/devel/kodi-platform/stage/usr/local/lib/libkodiplatform.so -- Installing: /construction/devel/kodi-platform/stage/usr/local/include/kodi/util/XMLUtils.h -- Installing: /construction/devel/kodi-platform/stage/usr/local/lib/pkgconfig/kodiplatform.pc -- Installing: /construction/devel/kodi-platform/stage/usr/local/lib/kodiplatform/kodiplatform-config.cmake ====> Compressing man pages (compress-man) -------------------------------------------------------------------------------- -- Phase: package -------------------------------------------------------------------------------- ===> Building package for kodi-platform-20180302 file sizes/checksums [9]: . done packing files [9]: . done packing directories [0]: . done -------------------------------------------------- -- Termination -------------------------------------------------- Finished: Wednesday, 6 MAR 2019 at 23:07:42 UTC Duration: 00:02:20