=> Building x11-fonts/oxygen-fonts Started : Friday, 26 JUL 2019 at 15:01:27 UTC Platform: 5.7-DEVELOPMENT DragonFly v5.7.0.83.g49866-DEVELOPMENT #40: Sun Jun 30 03:00:04 PDT 2019 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 -------------------------------------------------- -- Environment -------------------------------------------------- UNAME_r=5.6-SYNTH UNAME_m=x86_64 UNAME_p=x86_64 UNAME_v=DragonFly 5.6-SYNTH UNAME_s=DragonFly PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SSL_NO_VERIFY_PEER=1 TERM=dumb PKG_CACHEDIR=/var/cache/pkg8 PKG_DBDIR=/var/db/pkg8 PORTSDIR=/xports LANG=C HOME=/root USER=root -------------------------------------------------- -- Options -------------------------------------------------- -------------------------------------------------- -- CONFIGURE_ENV -------------------------------------------------- QT_SELECT=qt5 QMAKEMODULES="/construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/mkspecs/modules:/usr/local/lib/qt5/mkspecs/modules" XDG_DATA_HOME=/construction/x11-fonts/oxygen-fonts XDG_CONFIG_HOME=/construction/x11-fonts/oxygen-fonts HOME=/construction/x11-fonts/oxygen-fonts TMPDIR="/tmp" PATH=/construction/x11-fonts/oxygen-fonts/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc80 -------------------------------------------------- -- CONFIGURE_ARGS -------------------------------------------------- -------------------------------------------------- -- MAKE_ENV -------------------------------------------------- QT_SELECT=qt5 QMAKEMODULES="/construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/mkspecs/modules:/usr/local/lib/qt5/mkspecs/modules" XDG_DATA_HOME=/construction/x11-fonts/oxygen-fonts XDG_CONFIG_HOME=/construction/x11-fonts/oxygen-fonts HOME=/construction/x11-fonts/oxygen-fonts TMPDIR="/tmp" PATH=/construction/x11-fonts/oxygen-fonts/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc80 PREFIX=/usr/local LOCALBASE=/usr/local NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing " CPP="cpp" CPPFLAGS="" LDFLAGS=" " LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" -------------------------------------------------- -- MAKE_ARGS -------------------------------------------------- DESTDIR=/construction/x11-fonts/oxygen-fonts/stage -------------------------------------------------- -- PLIST_SUB -------------------------------------------------- CMAKE_BUILD_TYPE="release" FONTSDIR="share/fonts/oxygen-fonts" KDE_PREFIX="/usr/local" KDE_APPLICATIONS_VERSION="19.04.3" KDE_PLASMA_VERSION="5.4.3" KDE_FRAMEWORKS_VERSION="5.60.0" QT_BINDIR="lib/qt5/bin" QT_INCDIR="include/qt5" QT_LIBDIR="lib/qt5" QT_ARCHDIR="lib/qt5" QT_PLUGINDIR="lib/qt5/plugins" QT_LIBEXECDIR="libexec/qt5" QT_IMPORTDIR="lib/qt5/imports" QT_QMLDIR="lib/qt5/qml" QT_DATADIR="share/qt5" QT_DOCDIR="share/doc/qt5" QT_L10NDIR="share/qt5/translations" QT_EXAMPLEDIR="share/examples/qt5" QT_TESTDIR="share/qt5/tests" QT_MKSPECDIR="lib/qt5/mkspecs" QT_QTCHOOSERDIR="etc/xdg/qtchooser" OSREL=5.6 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/oxygen-fonts" EXAMPLESDIR="share/examples/oxygen-fonts" DATADIR="share/oxygen-fonts" WWWDIR="www/oxygen-fonts" ETCDIR="etc/oxygen-fonts" -------------------------------------------------- -- SUB_LIST -------------------------------------------------- FONTSDIR="/usr/local/share/fonts/oxygen-fonts" PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/oxygen-fonts DOCSDIR=/usr/local/share/doc/oxygen-fonts EXAMPLESDIR=/usr/local/share/examples/oxygen-fonts WWWDIR=/usr/local/www/oxygen-fonts ETCDIR=/usr/local/etc/oxygen-fonts -------------------------------------------------- -- /etc/make.conf -------------------------------------------------- SYNTHPROFILE=Release-5.6 USE_PACKAGE_DEPENDS_ONLY=yes PACKAGE_BUILDING=yes BATCH=yes PKG_CREATE_VERBOSE=yes PORTSDIR=/xports DISTDIR=/distfiles WRKDIRPREFIX=/construction PORT_DBDIR=/options PACKAGES=/packages MAKE_JOBS_NUMBER_LIMIT=5 LICENSES_ACCEPTED= NONE HAVE_COMPAT_IA32_KERN= CONFIGURE_MAX_CMD_LEN=262144 _PERL5_FROM_BIN=5.28.1 _ALTCCVERSION_921dbbb2=none _OBJC_ALTCCVERSION_921dbbb2=none _SMP_CPUS=8 UID=0 ARCH=x86_64 OPSYS=DragonFly DFLYVERSION=500601 OSVERSION=9999999 OSREL=5.6 _OSRELEASE=5.6-SYNTH PYTHONBASE=/usr/local _PKG_CHECKED=1 -------------------------------------------------------------------------------- -- Phase: check-sanity -------------------------------------------------------------------------------- ===> License OFL11 GPLv3RLE+ accepted by the user -------------------------------------------------------------------------------- -- Phase: pkg-depends -------------------------------------------------------------------------------- ===> oxygen-fonts-5.4.3 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.11.1.txz Installing pkg-1.11.1... Extracting pkg-1.11.1: .......... done ===> oxygen-fonts-5.4.3 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of oxygen-fonts-5.4.3 -------------------------------------------------------------------------------- -- Phase: fetch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: fetch -------------------------------------------------------------------------------- ===> License OFL11 GPLv3RLE+ accepted by the user ===> Fetching all distfiles required by oxygen-fonts-5.4.3 for building -------------------------------------------------------------------------------- -- Phase: checksum -------------------------------------------------------------------------------- ===> License OFL11 GPLv3RLE+ accepted by the user ===> Fetching all distfiles required by oxygen-fonts-5.4.3 for building => SHA256 Checksum OK for KDE/plasma/5.4.3/oxygen-fonts-5.4.3.tar.xz. -------------------------------------------------------------------------------- -- Phase: extract-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: extract -------------------------------------------------------------------------------- ===> License OFL11 GPLv3RLE+ accepted by the user ===> Fetching all distfiles required by oxygen-fonts-5.4.3 for building ===> Extracting for oxygen-fonts-5.4.3 => SHA256 Checksum OK for KDE/plasma/5.4.3/oxygen-fonts-5.4.3.tar.xz. -------------------------------------------------------------------------------- -- Phase: patch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: patch -------------------------------------------------------------------------------- ===> Patching for oxygen-fonts-5.4.3 -------------------------------------------------------------------------------- -- Phase: build-depends -------------------------------------------------------------------------------- ===> oxygen-fonts-5.4.3 depends on executable: fontforge - not found ===> Installing existing package /packages/All/fontforge-20190413.txz Installing fontforge-20190413... `-- Installing atk-2.28.1... | `-- Installing gettext-runtime-0.20.1... | | `-- Installing indexinfo-0.3.1... | | `-- Extracting indexinfo-0.3.1: .... done | `-- Extracting gettext-runtime-0.20.1: .......... done | `-- Installing glib-2.56.3_5,1... | | `-- Installing libffi-3.2.1_3... | | `-- Extracting libffi-3.2.1_3: .......... done | | `-- Installing libiconv-1.14_11... | | `-- Extracting libiconv-1.14_11: .......... done | | `-- Installing libxml2-2.9.9... | | `-- Extracting libxml2-2.9.9: .......... done | | `-- Installing pcre-8.43_1... | | `-- Extracting pcre-8.43_1: .......... done | | `-- Installing python36-3.6.9... | | `-- Installing expat-2.2.6_1... | | `-- Extracting expat-2.2.6_1: .......... done | | `-- Installing libressl-2.9.2... | | `-- Extracting libressl-2.9.2: .......... done | | `-- Installing ncurses-6.1.20190525... | | `-- Extracting ncurses-6.1.20190525: .......... done | | `-- Installing readline-8.0.0... | | `-- Extracting readline-8.0.0: .......... done | | `-- Extracting python36-3.6.9: .......... done | `-- Extracting glib-2.56.3_5,1: .......... done No schema files found: doing nothing. `-- Extracting atk-2.28.1: .......... done `-- Installing cairo-1.16.0,2... | `-- Installing fontconfig-2.12.6,1... | | `-- Installing freetype2-2.10.0... | | `-- Extracting freetype2-2.10.0: .......... done | `-- Extracting fontconfig-2.12.6,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | `-- Installing libX11-1.6.8,1... | | `-- Installing libXau-1.0.9... | | `-- Extracting libXau-1.0.9: .......... done | | `-- Installing libXdmcp-1.1.3... | | `-- Installing xorgproto-2019.1... | | `-- Extracting xorgproto-2019.1: .......... done | | `-- Extracting libXdmcp-1.1.3: ......... done | | `-- Installing libxcb-1.13.1... | | `-- Installing libpthread-stubs-0.4... | | `-- Extracting libpthread-stubs-0.4: .... done | | `-- Extracting libxcb-1.13.1: .......... done | `-- Extracting libX11-1.6.8,1: .......... done | `-- Installing libXext-1.3.4,1... | `-- Extracting libXext-1.3.4,1: .......... done | `-- Installing libXrender-0.9.10_2... | `-- Extracting libXrender-0.9.10_2: .......... done | `-- Installing mesa-libs-18.3.2_1... | | `-- Installing libXdamage-1.1.5... | | `-- Installing libXfixes-5.0.3_2... | | `-- Extracting libXfixes-5.0.3_2: .......... done | | `-- Extracting libXdamage-1.1.5: ......... done | | `-- Installing libXrandr-1.5.2... | | `-- Extracting libXrandr-1.5.2: .......... done | | `-- Installing libXxf86vm-1.1.4_3... | | `-- Extracting libXxf86vm-1.1.4_3: .......... done | | `-- Installing libdrm-2.4.99... | | `-- Installing libpciaccess-0.14... | | | `-- Installing pciids-20190620... | | | `-- Extracting pciids-20190620: ..... done | | `-- Extracting libpciaccess-0.14: ......... done | | `-- Extracting libdrm-2.4.99: .......... done | | `-- Installing libelf-0.8.13_3... | | `-- Extracting libelf-0.8.13_3: .......... done | | `-- Installing libxshmfence-1.3... | | `-- Extracting libxshmfence-1.3: ......... done | | `-- Installing wayland-1.16.0... | | `-- Extracting wayland-1.16.0: .......... done | `-- Extracting mesa-libs-18.3.2_1: .......... done | `-- Installing pixman-0.38.4... | `-- Extracting pixman-0.38.4: .......... done | `-- Installing png-1.6.37... | `-- Extracting png-1.6.37: .......... done `-- Extracting cairo-1.16.0,2: .......... done `-- Installing desktop-file-utils-0.23... `-- Extracting desktop-file-utils-0.23: .......... done `-- Installing gdk-pixbuf2-2.38.1... | `-- Installing jpeg-turbo-2.0.2... | `-- Extracting jpeg-turbo-2.0.2: .......... done | `-- Installing shared-mime-info-1.10_1... | `-- Extracting shared-mime-info-1.10_1: .......... done | `-- Installing tiff-4.0.10_1... | | `-- Installing jbigkit-2.1_1... | | `-- Extracting jbigkit-2.1_1: .......... done | `-- Extracting tiff-4.0.10_1: .......... done `-- Extracting gdk-pixbuf2-2.38.1: .......... done `-- Installing giflib-5.1.9... `-- Extracting giflib-5.1.9: .......... done `-- Installing gtk-update-icon-cache-2.24.32... | `-- Installing hicolor-icon-theme-0.17... | `-- Extracting hicolor-icon-theme-0.17: . done | `-- Installing libXcomposite-0.4.5,1... | `-- Extracting libXcomposite-0.4.5,1: .......... done | `-- Installing libXcursor-1.2.0... | `-- Extracting libXcursor-1.2.0: .......... done | `-- Installing libXi-1.7.10,1... | `-- Extracting libXi-1.7.10,1: .......... done | `-- Installing libXinerama-1.1.4_2,1... | `-- Extracting libXinerama-1.1.4_2,1: .......... done | `-- Installing pango-1.42.4_2... | | `-- Installing encodings-1.0.5,1... | | `-- Installing font-util-1.3.1... | | `-- Extracting font-util-1.3.1: .......... done | | `-- Extracting encodings-1.0.5,1: .......... done | | `-- Installing fribidi-0.19.7... | | `-- Extracting fribidi-0.19.7: .......... done | | `-- Installing harfbuzz-2.5.3... | | `-- Installing graphite2-1.3.13... | | `-- Extracting graphite2-1.3.13: .......... done | | `-- Extracting harfbuzz-2.5.3: .......... done | | `-- Installing libXft-2.3.2_3... | | `-- Extracting libXft-2.3.2_3: .......... done | | `-- Installing xorg-fonts-truetype-7.7_1... | | `-- Installing dejavu-2.37_1... | | | `-- Installing mkfontscale-1.2.1... | | | `-- Installing libfontenc-1.1.4... | | | `-- Extracting libfontenc-1.1.4: ......... done | | | `-- Extracting mkfontscale-1.2.1: ....... done | | `-- Extracting dejavu-2.37_1: .......... done | | `-- Installing font-bh-ttf-1.0.3_4... | | `-- Extracting font-bh-ttf-1.0.3_4: .......... done | | `-- Installing font-misc-ethiopic-1.0.3_4... | | `-- Extracting font-misc-ethiopic-1.0.3_4: ... done | | `-- Installing font-misc-meltho-1.0.3_4... | | `-- Extracting font-misc-meltho-1.0.3_4: .......... done | `-- Extracting pango-1.42.4_2: .......... done `-- Extracting gtk-update-icon-cache-2.24.32: .... done `-- Installing gtk2-2.24.32... | `-- Installing cups-2.2.11... | | `-- Installing avahi-app-0.7_2... | | `-- Installing dbus-1.12.12... | | | `-- Installing libICE-1.0.9_3,1... | | | `-- Extracting libICE-1.0.9_3,1: .......... done | | | `-- Installing libSM-1.2.3,1... | | | `-- Extracting libSM-1.2.3,1: .......... done ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | | `-- Extracting dbus-1.12.12: ......... done | | `-- Installing dbus-glib-0.110... | | `-- Extracting dbus-glib-0.110: .......... done | | `-- Installing gdbm-1.18.1_1... | | `-- Extracting gdbm-1.18.1_1: .......... done | | `-- Installing gnome_subr-1.0... | | `-- Extracting gnome_subr-1.0: .... done | | `-- Installing gobject-introspection-1.56.1,1... | | `-- Extracting gobject-introspection-1.56.1,1: .......... done | | `-- Installing libdaemon-0.14_1... | | `-- Extracting libdaemon-0.14_1: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. | | `-- Extracting avahi-app-0.7_2: .......... done | | `-- Installing gnutls-3.6.8_1... | | `-- Installing ca_root_nss-3.45... | | `-- Extracting ca_root_nss-3.45: ........ done | | `-- Installing gmp-6.1.2_1... | | `-- Extracting gmp-6.1.2_1: .......... done | | `-- Installing libidn2-2.2.0... | | | `-- Installing libunistring-0.9.10_1... | | | `-- Extracting libunistring-0.9.10_1: .......... done | | `-- Extracting libidn2-2.2.0: .......... done | | `-- Installing libtasn1-4.13_1... | | `-- Extracting libtasn1-4.13_1: .......... done | | `-- Installing nettle-3.5.1... | | `-- Extracting nettle-3.5.1: .......... done | | `-- Installing p11-kit-0.23.16.1... | | `-- Extracting p11-kit-0.23.16.1: .......... done | | `-- Installing trousers-0.3.14_2... | | | `-- Installing tpm-emulator-0.7.4_2... ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | | `-- Extracting tpm-emulator-0.7.4_2: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting trousers-0.3.14_2: .......... done | | `-- Extracting gnutls-3.6.8_1: .......... done | | `-- Installing libpaper-1.1.24.4... | | `-- Extracting libpaper-1.1.24.4: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. | `-- Extracting cups-2.2.11: .......... done `-- Extracting gtk2-2.24.32: .......... done `-- Installing libltdl-2.4.6... `-- Extracting libltdl-2.4.6: .......... done `-- Installing libspiro-0.5.20150702,1... `-- Extracting libspiro-0.5.20150702,1: .......... done `-- Installing libuninameslist-20091231_1... `-- Extracting libuninameslist-20091231_1: ......... done `-- Installing libxkbui-1.0.2_6... | `-- Installing libXt-1.2.0,1... | `-- Extracting libXt-1.2.0,1: .......... done | `-- Installing libxkbfile-1.1.0... | `-- Extracting libxkbfile-1.1.0: .......... done `-- Extracting libxkbui-1.0.2_6: ...... done Extracting fontforge-20190413: .......... done Message from python36-3.6.9: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py36-gdbm databases/py-gdbm@py36 py36-sqlite3 databases/py-sqlite3@py36 py36-tkinter x11-toolkits/py-tkinter@py36 =========================================================================== Message from freetype2-2.10.0: The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Message from dejavu-2.37_1: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from ca_root_nss-3.45: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.14_2: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Message from libuninameslist-20091231_1: ===> NOTICE: The libuninameslist port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> oxygen-fonts-5.4.3 depends on executable: fontforge - found ===> Returning to build of oxygen-fonts-5.4.3 ===> oxygen-fonts-5.4.3 depends on file: /usr/local/bin/cmake - not found ===> Installing existing package /packages/All/cmake-3.14.5.txz Installing cmake-3.14.5... `-- Installing curl-7.65.1_1... | `-- Installing libnghttp2-1.39.1... | `-- Extracting libnghttp2-1.39.1: .......... done `-- Extracting curl-7.65.1_1: .......... done `-- Installing jsoncpp-1.8.1_6... `-- Extracting jsoncpp-1.8.1_6: .......... done `-- Installing libarchive-3.3.3_1,1... | `-- Installing liblz4-1.9.1,1... | `-- Extracting liblz4-1.9.1,1: .......... done | `-- Installing lzo2-2.10_1... | `-- Extracting lzo2-2.10_1: .......... done `-- Extracting libarchive-3.3.3_1,1: .......... done `-- Installing libuv-1.30.1... `-- Extracting libuv-1.30.1: .......... done `-- Installing rhash-1.3.5... `-- Extracting rhash-1.3.5: .......... done Extracting cmake-3.14.5: .......... done ===> oxygen-fonts-5.4.3 depends on file: /usr/local/bin/cmake - found ===> Returning to build of oxygen-fonts-5.4.3 ===> oxygen-fonts-5.4.3 depends on file: /usr/local/share/ECM/cmake/ECMConfig.cmake - not found ===> Installing existing package /packages/All/kf5-extra-cmake-modules-5.60.0.txz Installing kf5-extra-cmake-modules-5.60.0... `-- Installing qt5-linguisttools-5.12.2... | `-- Installing qt5-core-5.12.2_1... | | `-- Installing etc_os-release-0.1_2... | | `-- Extracting etc_os-release-0.1_2: . done | | `-- Installing icu-64.2,1... | | `-- Extracting icu-64.2,1: .......... done | | `-- Installing pcre2-10.32_1... | | `-- Extracting pcre2-10.32_1: .......... done | | `-- Installing qtchooser-66... | | `-- Extracting qtchooser-66: .......... done | `-- Extracting qt5-core-5.12.2_1: .......... done | `-- Installing qt5-xml-5.12.2... | `-- Extracting qt5-xml-5.12.2: .......... done `-- Extracting qt5-linguisttools-5.12.2: .......... done Extracting kf5-extra-cmake-modules-5.60.0: .......... done Message from qtchooser-66: qtchooser is a wrapper that allows selecting whether Qt4 or Qt5 binaries for qmake, moc and other tools will be run when invoking the binaries in $PATH. By default, the Qt5 versions are run. It is possible to change the behavior by setting the QT_SELECT environment variable to "qt4". See qtchooser(1) for more information. ===> oxygen-fonts-5.4.3 depends on file: /usr/local/share/ECM/cmake/ECMConfig.cmake - found ===> Returning to build of oxygen-fonts-5.4.3 ===> oxygen-fonts-5.4.3 depends on file: /usr/local/lib/qt5/bin/moc - not found ===> Installing existing package /packages/All/qt5-buildtools-5.12.2.txz Installing qt5-buildtools-5.12.2... `-- Installing perl5-5.28.2... `-- Extracting perl5-5.28.2: .......... done Extracting qt5-buildtools-5.12.2: .......... done Message from perl5-5.28.2: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. ===> oxygen-fonts-5.4.3 depends on file: /usr/local/lib/qt5/bin/moc - found ===> Returning to build of oxygen-fonts-5.4.3 ===> oxygen-fonts-5.4.3 depends on file: /usr/local/lib/qt5/bin/qmake - not found ===> Installing existing package /packages/All/qt5-qmake-5.12.2_1.txz Installing qt5-qmake-5.12.2_1... Extracting qt5-qmake-5.12.2_1: .......... done ===> oxygen-fonts-5.4.3 depends on file: /usr/local/lib/qt5/bin/qmake - found ===> Returning to build of oxygen-fonts-5.4.3 -------------------------------------------------------------------------------- -- Phase: lib-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: configure -------------------------------------------------------------------------------- ===> Configuring for oxygen-fonts-5.4.3 ===> Performing out-of-source build /bin/mkdir -p /construction/x11-fonts/oxygen-fonts/.build -- The C compiler identification is GNU 8.3.0 -- The CXX compiler identification is GNU 8.3.0 -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done -- FontForge found: /usr/local/bin/fontforge -- The following REQUIRED packages have been found: * ECM (required version >= 1.2.0) -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: BUILD_TESTING CMAKE_CXX_FLAGS_DEBUG CMAKE_CXX_FLAGS_RELEASE CMAKE_C_FLAGS_DEBUG CMAKE_C_FLAGS_RELEASE CMAKE_EXE_LINKER_FLAGS CMAKE_MODULE_LINKER_FLAGS CMAKE_NO_BUILTIN_CHRPATH CMAKE_SHARED_LINKER_FLAGS THREADS_HAVE_PTHREAD_ARG -- Build files have been written to: /construction/x11-fonts/oxygen-fonts/.build -------------------------------------------------------------------------------- -- Phase: build -------------------------------------------------------------------------------- ===> Building for oxygen-fonts-5.4.3 /usr/local/bin/cmake -S/construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 -B/construction/x11-fonts/oxygen-fonts/.build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/local/bin/cmake -E cmake_progress_start /construction/x11-fonts/oxygen-fonts/.build/CMakeFiles /construction/x11-fonts/oxygen-fonts/.build/CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all --- CMakeFiles/mono.dir/all --- --- CMakeFiles/regular.dir/all --- --- CMakeFiles/bold.dir/all --- --- CMakeFiles/mono.dir/all --- /usr/bin/make -f CMakeFiles/mono.dir/build.make CMakeFiles/mono.dir/depend --- CMakeFiles/regular.dir/all --- /usr/bin/make -f CMakeFiles/regular.dir/build.make CMakeFiles/regular.dir/depend --- CMakeFiles/bold.dir/all --- /usr/bin/make -f CMakeFiles/bold.dir/build.make CMakeFiles/bold.dir/depend --- CMakeFiles/mono.dir/all --- --- CMakeFiles/mono.dir/depend --- --- CMakeFiles/regular.dir/all --- --- CMakeFiles/regular.dir/depend --- --- CMakeFiles/bold.dir/all --- --- CMakeFiles/bold.dir/depend --- --- CMakeFiles/mono.dir/all --- cd /construction/x11-fonts/oxygen-fonts/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 /construction/x11-fonts/oxygen-fonts/.build /construction/x11-fonts/oxygen-fonts/.build /construction/x11-fonts/oxygen-fonts/.build/CMakeFiles/mono.dir/DependInfo.cmake --- CMakeFiles/regular.dir/all --- cd /construction/x11-fonts/oxygen-fonts/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 /construction/x11-fonts/oxygen-fonts/.build /construction/x11-fonts/oxygen-fonts/.build /construction/x11-fonts/oxygen-fonts/.build/CMakeFiles/regular.dir/DependInfo.cmake --- CMakeFiles/bold.dir/all --- cd /construction/x11-fonts/oxygen-fonts/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 /construction/x11-fonts/oxygen-fonts/.build /construction/x11-fonts/oxygen-fonts/.build /construction/x11-fonts/oxygen-fonts/.build/CMakeFiles/bold.dir/DependInfo.cmake --- CMakeFiles/mono.dir/all --- Scanning dependencies of target mono --- CMakeFiles/regular.dir/all --- Scanning dependencies of target regular --- CMakeFiles/mono.dir/all --- /usr/bin/make -f CMakeFiles/mono.dir/build.make CMakeFiles/mono.dir/build --- CMakeFiles/regular.dir/all --- /usr/bin/make -f CMakeFiles/regular.dir/build.make CMakeFiles/regular.dir/build --- CMakeFiles/bold.dir/all --- Scanning dependencies of target bold /usr/bin/make -f CMakeFiles/bold.dir/build.make CMakeFiles/bold.dir/build --- CMakeFiles/mono.dir/all --- --- CMakeFiles/mono --- --- CMakeFiles/regular.dir/all --- --- CMakeFiles/regular --- --- CMakeFiles/mono.dir/all --- fontforge /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/generate-ttf.pe /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/oxygen-fonts/mono-400/src/OxygenMono-Regular.sfd /construction/x11-fonts/oxygen-fonts/.build/OxygenMono-Regular.ttf --- CMakeFiles/regular.dir/all --- fontforge /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/generate-ttf.pe /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/oxygen-fonts/Regular-400/src/Oxygen-Sans.sfd /construction/x11-fonts/oxygen-fonts/.build/Oxygen-Sans.ttf --- CMakeFiles/bold.dir/all --- --- CMakeFiles/bold --- fontforge /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/generate-ttf.pe /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/oxygen-fonts/Bold-700/src/Oxygen-Sans-Bold.sfd /construction/x11-fonts/oxygen-fonts/.build/Oxygen-Sans-Bold.ttf --- CMakeFiles/mono.dir/all --- Copyright (c) 2000-2018 by George Williams. See AUTHORS for Contributors. License GPLv3+: GNU GPL version 3 or later with many parts BSD . Please read LICENSE. Based on sources from 16:39 UTC 23-Jul-2019-ML-NoPython-D. Based on source from git with hash: --- CMakeFiles/regular.dir/all --- Copyright (c) 2000-2018 by George Williams. See AUTHORS for Contributors. License GPLv3+: GNU GPL version 3 or later with many parts BSD . Please read LICENSE. Based on sources from 16:39 UTC 23-Jul-2019-ML-NoPython-D. Based on source from git with hash: --- CMakeFiles/bold.dir/all --- Copyright (c) 2000-2018 by George Williams. See AUTHORS for Contributors. License GPLv3+: GNU GPL version 3 or later with many parts BSD . Please read LICENSE. Based on sources from 16:39 UTC 23-Jul-2019-ML-NoPython-D. Based on source from git with hash: --- CMakeFiles/regular.dir/all --- Built target regular --- CMakeFiles/bold.dir/all --- Built target bold --- CMakeFiles/mono.dir/all --- Built target mono /usr/local/bin/cmake -E cmake_progress_start /construction/x11-fonts/oxygen-fonts/.build/CMakeFiles 0 -------------------------------------------------------------------------------- -- Phase: run-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: stage -------------------------------------------------------------------------------- ===> Staging for oxygen-fonts-5.4.3 ===> Generating temporary packing list /usr/local/bin/cmake -S/construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 -B/construction/x11-fonts/oxygen-fonts/.build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/local/bin/cmake -E cmake_progress_start /construction/x11-fonts/oxygen-fonts/.build/CMakeFiles /construction/x11-fonts/oxygen-fonts/.build/CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all /usr/bin/make -f CMakeFiles/mono.dir/build.make CMakeFiles/mono.dir/depend cd /construction/x11-fonts/oxygen-fonts/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 /construction/x11-fonts/oxygen-fonts/.build /construction/x11-fonts/oxygen-fonts/.build /construction/x11-fonts/oxygen-fonts/.build/CMakeFiles/mono.dir/DependInfo.cmake /usr/bin/make -f CMakeFiles/mono.dir/build.make CMakeFiles/mono.dir/build fontforge /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/generate-ttf.pe /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/oxygen-fonts/mono-400/src/OxygenMono-Regular.sfd /construction/x11-fonts/oxygen-fonts/.build/OxygenMono-Regular.ttf Copyright (c) 2000-2018 by George Williams. See AUTHORS for Contributors. License GPLv3+: GNU GPL version 3 or later with many parts BSD . Please read LICENSE. Based on sources from 16:39 UTC 23-Jul-2019-ML-NoPython-D. Based on source from git with hash: Built target mono /usr/bin/make -f CMakeFiles/regular.dir/build.make CMakeFiles/regular.dir/depend cd /construction/x11-fonts/oxygen-fonts/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 /construction/x11-fonts/oxygen-fonts/.build /construction/x11-fonts/oxygen-fonts/.build /construction/x11-fonts/oxygen-fonts/.build/CMakeFiles/regular.dir/DependInfo.cmake /usr/bin/make -f CMakeFiles/regular.dir/build.make CMakeFiles/regular.dir/build fontforge /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/generate-ttf.pe /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/oxygen-fonts/Regular-400/src/Oxygen-Sans.sfd /construction/x11-fonts/oxygen-fonts/.build/Oxygen-Sans.ttf Copyright (c) 2000-2018 by George Williams. See AUTHORS for Contributors. License GPLv3+: GNU GPL version 3 or later with many parts BSD . Please read LICENSE. Based on sources from 16:39 UTC 23-Jul-2019-ML-NoPython-D. Based on source from git with hash: Built target regular /usr/bin/make -f CMakeFiles/bold.dir/build.make CMakeFiles/bold.dir/depend cd /construction/x11-fonts/oxygen-fonts/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3 /construction/x11-fonts/oxygen-fonts/.build /construction/x11-fonts/oxygen-fonts/.build /construction/x11-fonts/oxygen-fonts/.build/CMakeFiles/bold.dir/DependInfo.cmake /usr/bin/make -f CMakeFiles/bold.dir/build.make CMakeFiles/bold.dir/build fontforge /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/generate-ttf.pe /construction/x11-fonts/oxygen-fonts/oxygen-fonts-5.4.3/oxygen-fonts/Bold-700/src/Oxygen-Sans-Bold.sfd /construction/x11-fonts/oxygen-fonts/.build/Oxygen-Sans-Bold.ttf Copyright (c) 2000-2018 by George Williams. See AUTHORS for Contributors. License GPLv3+: GNU GPL version 3 or later with many parts BSD . Please read LICENSE. Based on sources from 16:39 UTC 23-Jul-2019-ML-NoPython-D. Based on source from git with hash: Built target bold /usr/local/bin/cmake -E cmake_progress_start /construction/x11-fonts/oxygen-fonts/.build/CMakeFiles 0 /usr/bin/make -f CMakeFiles/Makefile2 preinstall Installing the project stripped... /usr/local/bin/cmake -DCMAKE_INSTALL_DO_STRIP=1 -P cmake_install.cmake -- Install configuration: "Release" -- Installing: /construction/x11-fonts/oxygen-fonts/stage/usr/local/lib/cmake/OxygenFont/OxygenFontConfig.cmake -- Installing: /construction/x11-fonts/oxygen-fonts/stage/usr/local/lib/cmake/OxygenFont/OxygenFontConfigVersion.cmake -- Installing: /construction/x11-fonts/oxygen-fonts/stage/usr/local/share/fonts/truetype/oxygen/OxygenMono-Regular.ttf -- Installing: /construction/x11-fonts/oxygen-fonts/stage/usr/local/share/fonts/truetype/oxygen/Oxygen-Sans-Bold.ttf -- Installing: /construction/x11-fonts/oxygen-fonts/stage/usr/local/share/fonts/truetype/oxygen/Oxygen-Sans.ttf ====> Compressing man pages (compress-man) -------------------------------------------------------------------------------- -- Phase: package -------------------------------------------------------------------------------- ===> Building package for oxygen-fonts-5.4.3 file sizes/checksums [9]: . done packing files [9]: . done packing directories [0]: . done -------------------------------------------------- -- Termination -------------------------------------------------- Finished: Friday, 26 JUL 2019 at 15:02:12 UTC Duration: 00:00:44