=> Building audio/jalv-select Started : Wednesday, 24 JUL 2019 at 15:01:02 UTC Platform: 5.7-DEVELOPMENT DragonFly v5.7.0.83.g49866-DEVELOPMENT #40: Sun Jun 30 03:00:04 PDT 2019 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 -------------------------------------------------- -- Environment -------------------------------------------------- UNAME_r=5.6-SYNTH UNAME_m=x86_64 UNAME_p=x86_64 UNAME_v=DragonFly 5.6-SYNTH UNAME_s=DragonFly PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SSL_NO_VERIFY_PEER=1 TERM=dumb PKG_CACHEDIR=/var/cache/pkg8 PKG_DBDIR=/var/db/pkg8 PORTSDIR=/xports LANG=C HOME=/root USER=root -------------------------------------------------- -- Options -------------------------------------------------- -------------------------------------------------- -- CONFIGURE_ENV -------------------------------------------------- MAKE=gmake PKG_CONFIG=pkgconf XDG_DATA_HOME=/construction/audio/jalv-select XDG_CONFIG_HOME=/construction/audio/jalv-select HOME=/construction/audio/jalv-select TMPDIR="/tmp" PATH=/construction/audio/jalv-select/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc80 LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 -------------------------------------------------- -- CONFIGURE_ARGS -------------------------------------------------- -------------------------------------------------- -- MAKE_ENV -------------------------------------------------- XDG_DATA_HOME=/construction/audio/jalv-select XDG_CONFIG_HOME=/construction/audio/jalv-select HOME=/construction/audio/jalv-select TMPDIR="/tmp" PATH=/construction/audio/jalv-select/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc80 LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 PREFIX=/usr/local LOCALBASE=/usr/local NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing " CPP="cpp" CPPFLAGS="" LDFLAGS=" " LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" -------------------------------------------------- -- MAKE_ARGS -------------------------------------------------- MAN_DIR=/usr/local/man/man1 DESTDIR=/construction/audio/jalv-select/stage -------------------------------------------------- -- PLIST_SUB -------------------------------------------------- GTK2_VERSION="2.10.0" GTK3_VERSION="3.0.0" OSREL=5.6 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/jalv-select" EXAMPLESDIR="share/examples/jalv-select" DATADIR="share/jalv-select" WWWDIR="www/jalv-select" ETCDIR="etc/jalv-select" -------------------------------------------------- -- SUB_LIST -------------------------------------------------- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/jalv-select DOCSDIR=/usr/local/share/doc/jalv-select EXAMPLESDIR=/usr/local/share/examples/jalv-select WWWDIR=/usr/local/www/jalv-select ETCDIR=/usr/local/etc/jalv-select -------------------------------------------------- -- /etc/make.conf -------------------------------------------------- SYNTHPROFILE=Release-5.6 USE_PACKAGE_DEPENDS_ONLY=yes PACKAGE_BUILDING=yes BATCH=yes PKG_CREATE_VERBOSE=yes PORTSDIR=/xports DISTDIR=/distfiles WRKDIRPREFIX=/construction PORT_DBDIR=/options PACKAGES=/packages MAKE_JOBS_NUMBER_LIMIT=5 LICENSES_ACCEPTED= NONE HAVE_COMPAT_IA32_KERN= CONFIGURE_MAX_CMD_LEN=262144 _PERL5_FROM_BIN=5.28.1 _ALTCCVERSION_921dbbb2=none _OBJC_ALTCCVERSION_921dbbb2=none _SMP_CPUS=8 UID=0 ARCH=x86_64 OPSYS=DragonFly DFLYVERSION=500601 OSVERSION=9999999 OSREL=5.6 _OSRELEASE=5.6-SYNTH PYTHONBASE=/usr/local _PKG_CHECKED=1 -------------------------------------------------------------------------------- -- Phase: check-sanity -------------------------------------------------------------------------------- ===> License UNLICENSE accepted by the user -------------------------------------------------------------------------------- -- Phase: pkg-depends -------------------------------------------------------------------------------- ===> jalv-select-1.2_1 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.11.1.txz Installing pkg-1.11.1... Extracting pkg-1.11.1: .......... done ===> jalv-select-1.2_1 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of jalv-select-1.2_1 -------------------------------------------------------------------------------- -- Phase: fetch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: fetch -------------------------------------------------------------------------------- ===> License UNLICENSE accepted by the user ===> Fetching all distfiles required by jalv-select-1.2_1 for building -------------------------------------------------------------------------------- -- Phase: checksum -------------------------------------------------------------------------------- ===> License UNLICENSE accepted by the user ===> Fetching all distfiles required by jalv-select-1.2_1 for building => SHA256 Checksum OK for brummer10-jalv_select-v1.2_GH0.tar.gz. -------------------------------------------------------------------------------- -- Phase: extract-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: extract -------------------------------------------------------------------------------- ===> License UNLICENSE accepted by the user ===> Fetching all distfiles required by jalv-select-1.2_1 for building ===> Extracting for jalv-select-1.2_1 => SHA256 Checksum OK for brummer10-jalv_select-v1.2_GH0.tar.gz. -------------------------------------------------------------------------------- -- Phase: patch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: patch -------------------------------------------------------------------------------- ===> Patching for jalv-select-1.2_1 -------------------------------------------------------------------------------- -- Phase: build-depends -------------------------------------------------------------------------------- ===> jalv-select-1.2_1 depends on package: lv2>0 - not found ===> Installing existing package /packages/All/lv2-1.16.0.txz Installing lv2-1.16.0... `-- Installing atk-2.28.1... | `-- Installing gettext-runtime-0.20.1... | | `-- Installing indexinfo-0.3.1... | | `-- Extracting indexinfo-0.3.1: .... done | `-- Extracting gettext-runtime-0.20.1: .......... done | `-- Installing glib-2.56.3_5,1... | | `-- Installing libffi-3.2.1_3... | | `-- Extracting libffi-3.2.1_3: .......... done | | `-- Installing libiconv-1.14_11... | | `-- Extracting libiconv-1.14_11: .......... done | | `-- Installing libxml2-2.9.9... | | `-- Extracting libxml2-2.9.9: .......... done | | `-- Installing pcre-8.43_1... | | `-- Extracting pcre-8.43_1: .......... done | | `-- Installing python36-3.6.9... | | `-- Installing expat-2.2.6_1... | | `-- Extracting expat-2.2.6_1: .......... done | | `-- Installing libressl-2.9.2... | | `-- Extracting libressl-2.9.2: .......... done | | `-- Installing ncurses-6.1.20190525... | | `-- Extracting ncurses-6.1.20190525: .......... done | | `-- Installing readline-8.0.0... | | `-- Extracting readline-8.0.0: .......... done | | `-- Extracting python36-3.6.9: .......... done | `-- Extracting glib-2.56.3_5,1: .......... done No schema files found: doing nothing. `-- Extracting atk-2.28.1: .......... done `-- Installing cairo-1.16.0,2... | `-- Installing fontconfig-2.12.6,1... | | `-- Installing freetype2-2.10.0... | | `-- Extracting freetype2-2.10.0: .......... done | `-- Extracting fontconfig-2.12.6,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | `-- Installing libX11-1.6.8,1... | | `-- Installing libXau-1.0.9... | | `-- Extracting libXau-1.0.9: .......... done | | `-- Installing libXdmcp-1.1.3... | | `-- Installing xorgproto-2019.1... | | `-- Extracting xorgproto-2019.1: .......... done | | `-- Extracting libXdmcp-1.1.3: ......... done | | `-- Installing libxcb-1.13.1... | | `-- Installing libpthread-stubs-0.4... | | `-- Extracting libpthread-stubs-0.4: .... done | | `-- Extracting libxcb-1.13.1: .......... done | `-- Extracting libX11-1.6.8,1: .......... done | `-- Installing libXext-1.3.4,1... | `-- Extracting libXext-1.3.4,1: .......... done | `-- Installing libXrender-0.9.10_2... | `-- Extracting libXrender-0.9.10_2: .......... done | `-- Installing mesa-libs-18.3.2_1... | | `-- Installing libXdamage-1.1.5... | | `-- Installing libXfixes-5.0.3_2... | | `-- Extracting libXfixes-5.0.3_2: .......... done | | `-- Extracting libXdamage-1.1.5: ......... done | | `-- Installing libXrandr-1.5.2... | | `-- Extracting libXrandr-1.5.2: .......... done | | `-- Installing libXxf86vm-1.1.4_3... | | `-- Extracting libXxf86vm-1.1.4_3: .......... done | | `-- Installing libdrm-2.4.99... | | `-- Installing libpciaccess-0.14... | | | `-- Installing pciids-20190620... | | | `-- Extracting pciids-20190620: ..... done | | `-- Extracting libpciaccess-0.14: ......... done | | `-- Extracting libdrm-2.4.99: .......... done | | `-- Installing libelf-0.8.13_3... | | `-- Extracting libelf-0.8.13_3: .......... done | | `-- Installing libxshmfence-1.3... | | `-- Extracting libxshmfence-1.3: ......... done | | `-- Installing wayland-1.16.0... | | `-- Extracting wayland-1.16.0: .......... done | `-- Extracting mesa-libs-18.3.2_1: .......... done | `-- Installing pixman-0.38.4... | `-- Extracting pixman-0.38.4: .......... done | `-- Installing png-1.6.37... | `-- Extracting png-1.6.37: .......... done `-- Extracting cairo-1.16.0,2: .......... done `-- Installing gdk-pixbuf2-2.38.1... | `-- Installing jpeg-turbo-2.0.2... | `-- Extracting jpeg-turbo-2.0.2: .......... done | `-- Installing shared-mime-info-1.10_1... | `-- Extracting shared-mime-info-1.10_1: .......... done | `-- Installing tiff-4.0.10_1... | | `-- Installing jbigkit-2.1_1... | | `-- Extracting jbigkit-2.1_1: .......... done | `-- Extracting tiff-4.0.10_1: .......... done `-- Extracting gdk-pixbuf2-2.38.1: .......... done `-- Installing gtk2-2.24.32... | `-- Installing cups-2.2.11... | | `-- Installing avahi-app-0.7_2... | | `-- Installing dbus-1.12.12... | | | `-- Installing libICE-1.0.9_3,1... | | | `-- Extracting libICE-1.0.9_3,1: .......... done | | | `-- Installing libSM-1.2.3,1... | | | `-- Extracting libSM-1.2.3,1: .......... done ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | | `-- Extracting dbus-1.12.12: ......... done | | `-- Installing dbus-glib-0.110... | | `-- Extracting dbus-glib-0.110: .......... done | | `-- Installing gdbm-1.18.1_1... | | `-- Extracting gdbm-1.18.1_1: .......... done | | `-- Installing gnome_subr-1.0... | | `-- Extracting gnome_subr-1.0: .... done | | `-- Installing gobject-introspection-1.56.1,1... | | `-- Extracting gobject-introspection-1.56.1,1: .......... done | | `-- Installing libdaemon-0.14_1... | | `-- Extracting libdaemon-0.14_1: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. | | `-- Extracting avahi-app-0.7_2: .......... done | | `-- Installing gnutls-3.6.8_1... | | `-- Installing ca_root_nss-3.45... | | `-- Extracting ca_root_nss-3.45: ........ done | | `-- Installing gmp-6.1.2_1... | | `-- Extracting gmp-6.1.2_1: .......... done | | `-- Installing libidn2-2.2.0... | | | `-- Installing libunistring-0.9.10_1... | | | `-- Extracting libunistring-0.9.10_1: .......... done | | `-- Extracting libidn2-2.2.0: .......... done | | `-- Installing libtasn1-4.13_1... | | `-- Extracting libtasn1-4.13_1: .......... done | | `-- Installing nettle-3.5.1... | | `-- Extracting nettle-3.5.1: .......... done | | `-- Installing p11-kit-0.23.16.1... | | `-- Extracting p11-kit-0.23.16.1: .......... done | | `-- Installing trousers-0.3.14_2... | | | `-- Installing tpm-emulator-0.7.4_2... ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | | `-- Extracting tpm-emulator-0.7.4_2: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting trousers-0.3.14_2: .......... done | | `-- Extracting gnutls-3.6.8_1: .......... done | | `-- Installing libpaper-1.1.24.4... | | `-- Extracting libpaper-1.1.24.4: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. | `-- Extracting cups-2.2.11: .......... done | `-- Installing gtk-update-icon-cache-2.24.32... | | `-- Installing hicolor-icon-theme-0.17... | | `-- Extracting hicolor-icon-theme-0.17: . done | | `-- Installing libXcomposite-0.4.5,1... | | `-- Extracting libXcomposite-0.4.5,1: .......... done | | `-- Installing libXcursor-1.2.0... | | `-- Extracting libXcursor-1.2.0: .......... done | | `-- Installing libXi-1.7.10,1... | | `-- Extracting libXi-1.7.10,1: .......... done | | `-- Installing libXinerama-1.1.4_2,1... | | `-- Extracting libXinerama-1.1.4_2,1: .......... done | | `-- Installing pango-1.42.4_2... | | `-- Installing encodings-1.0.5,1... | | | `-- Installing font-util-1.3.1... | | | `-- Extracting font-util-1.3.1: .......... done | | `-- Extracting encodings-1.0.5,1: .......... done | | `-- Installing fribidi-0.19.7... | | `-- Extracting fribidi-0.19.7: .......... done | | `-- Installing harfbuzz-2.5.3... | | | `-- Installing graphite2-1.3.13... | | | `-- Extracting graphite2-1.3.13: .......... done | | `-- Extracting harfbuzz-2.5.3: .......... done | | `-- Installing libXft-2.3.2_3... | | `-- Extracting libXft-2.3.2_3: .......... done | | `-- Installing xorg-fonts-truetype-7.7_1... | | | `-- Installing dejavu-2.37_1... | | | `-- Installing mkfontscale-1.2.1... | | | | `-- Installing libfontenc-1.1.4... | | | | `-- Extracting libfontenc-1.1.4: ......... done | | | `-- Extracting mkfontscale-1.2.1: ....... done | | | `-- Extracting dejavu-2.37_1: .......... done | | | `-- Installing font-bh-ttf-1.0.3_4... | | | `-- Extracting font-bh-ttf-1.0.3_4: .......... done | | | `-- Installing font-misc-ethiopic-1.0.3_4... | | | `-- Extracting font-misc-ethiopic-1.0.3_4: ... done | | | `-- Installing font-misc-meltho-1.0.3_4... | | | `-- Extracting font-misc-meltho-1.0.3_4: .......... done | | `-- Extracting pango-1.42.4_2: .......... done | `-- Extracting gtk-update-icon-cache-2.24.32: .... done `-- Extracting gtk2-2.24.32: .......... done `-- Installing libsndfile-1.0.28_2... | `-- Installing flac-1.3.2... | | `-- Installing libogg-1.3.3,4... | | `-- Extracting libogg-1.3.3,4: .......... done | `-- Extracting flac-1.3.2: .......... done | `-- Installing libvorbis-1.3.6,3... | `-- Extracting libvorbis-1.3.6,3: .......... done `-- Extracting libsndfile-1.0.28_2: .......... done `-- Installing py36-lxml-4.3.3... | `-- Installing libxslt-1.1.33... | | `-- Installing libgcrypt-1.8.4_1... | | `-- Installing libgpg-error-1.36... | | `-- Extracting libgpg-error-1.36: .......... done | | `-- Extracting libgcrypt-1.8.4_1: .......... done | `-- Extracting libxslt-1.1.33: .......... done | `-- Installing py36-setuptools-41.0.1... | `-- Extracting py36-setuptools-41.0.1: .......... done `-- Extracting py36-lxml-4.3.3: .......... done `-- Installing py36-pygments-2.4.1... `-- Extracting py36-pygments-2.4.1: .......... done `-- Installing py36-rdflib-4.2.2_1... | `-- Installing py36-html5lib-1.0.1... | | `-- Installing py36-six-1.12.0... | | `-- Extracting py36-six-1.12.0: .......... done | | `-- Installing py36-webencodings-0.5.1... | | `-- Extracting py36-webencodings-0.5.1: .......... done | `-- Extracting py36-html5lib-1.0.1: .......... done | `-- Installing py36-isodate-0.6.0... | `-- Extracting py36-isodate-0.6.0: .......... done | `-- Installing py36-pyparsing-2.4.0... | `-- Extracting py36-pyparsing-2.4.0: .......... done | `-- Installing py36-sparqlwrapper-1.8.4... | `-- Extracting py36-sparqlwrapper-1.8.4: .......... done `-- Extracting py36-rdflib-4.2.2_1: .......... done Extracting lv2-1.16.0: .......... done Message from python36-3.6.9: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py36-gdbm databases/py-gdbm@py36 py36-sqlite3 databases/py-sqlite3@py36 py36-tkinter x11-toolkits/py-tkinter@py36 =========================================================================== Message from freetype2-2.10.0: The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Message from ca_root_nss-3.45: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.14_2: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Message from dejavu-2.37_1: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. ===> jalv-select-1.2_1 depends on package: lv2>0 - found ===> Returning to build of jalv-select-1.2_1 ===> jalv-select-1.2_1 depends on executable: gmake - not found ===> Installing existing package /packages/All/gmake-4.2.1_3.txz Installing gmake-4.2.1_3... Extracting gmake-4.2.1_3: .......... done ===> jalv-select-1.2_1 depends on executable: gmake - found ===> Returning to build of jalv-select-1.2_1 ===> jalv-select-1.2_1 depends on package: pkgconf>=1.3.0_1 - not found ===> Installing existing package /packages/All/pkgconf-1.6.1,1.txz Installing pkgconf-1.6.1,1... Extracting pkgconf-1.6.1,1: .......... done ===> jalv-select-1.2_1 depends on package: pkgconf>=1.3.0_1 - found ===> Returning to build of jalv-select-1.2_1 ===> jalv-select-1.2_1 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found -------------------------------------------------------------------------------- -- Phase: lib-depends -------------------------------------------------------------------------------- ===> jalv-select-1.2_1 depends on shared library: libfontconfig.so - found (/usr/local/lib/libfontconfig.so) ===> jalv-select-1.2_1 depends on shared library: libfreetype.so - found (/usr/local/lib/libfreetype.so) ===> jalv-select-1.2_1 depends on shared library: liblilv-0.so - not found ===> Installing existing package /packages/All/lilv-0.24.4_1.txz Installing lilv-0.24.4_1... `-- Installing serd-0.30.0... `-- Extracting serd-0.30.0: .......... done `-- Installing sord-0.16.2... `-- Extracting sord-0.16.2: .......... done `-- Installing sratom-0.6.2_1... `-- Extracting sratom-0.6.2_1: ........ done Extracting lilv-0.24.4_1: .......... done ===> jalv-select-1.2_1 depends on shared library: liblilv-0.so - found (/usr/local/lib/liblilv-0.so) ===> Returning to build of jalv-select-1.2_1 ===> jalv-select-1.2_1 depends on shared library: libserd-0.so - found (/usr/local/lib/libserd-0.so) ===> jalv-select-1.2_1 depends on shared library: libsord-0.so - found (/usr/local/lib/libsord-0.so) ===> jalv-select-1.2_1 depends on shared library: libsratom-0.so - found (/usr/local/lib/libsratom-0.so) ===> jalv-select-1.2_1 depends on shared library: libintl.so - found (/usr/local/lib/libintl.so) ===> jalv-select-1.2_1 depends on shared library: libatk-1.0.so - found (/usr/local/lib/libatk-1.0.so) ===> jalv-select-1.2_1 depends on shared library: libatkmm-1.6.so - not found ===> Installing existing package /packages/All/atkmm-2.24.2_3.txz Installing atkmm-2.24.2_3... `-- Installing glibmm-2.56.0_1,1... | `-- Installing libsigc++-2.10.0_3... | `-- Extracting libsigc++-2.10.0_3: .......... done | `-- Installing perl5-5.28.2... | `-- Extracting perl5-5.28.2: .......... done `-- Extracting glibmm-2.56.0_1,1: .......... done Extracting atkmm-2.24.2_3: .......... done Message from perl5-5.28.2: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. ===> jalv-select-1.2_1 depends on shared library: libatkmm-1.6.so - found (/usr/local/lib/libatkmm-1.6.so) ===> Returning to build of jalv-select-1.2_1 ===> jalv-select-1.2_1 depends on shared library: libcairo.so - found (/usr/local/lib/libcairo.so) ===> jalv-select-1.2_1 depends on shared library: libcairomm-1.0.so - not found ===> Installing existing package /packages/All/cairomm-1.12.2_3.txz Installing cairomm-1.12.2_3... `-- Installing libxml++-2.34.2_3,1... `-- Extracting libxml++-2.34.2_3,1: .......... done Extracting cairomm-1.12.2_3: .......... done ===> jalv-select-1.2_1 depends on shared library: libcairomm-1.0.so - found (/usr/local/lib/libcairomm-1.0.so) ===> Returning to build of jalv-select-1.2_1 ===> jalv-select-1.2_1 depends on shared library: libgdk_pixbuf-2.0.so - found (/usr/local/lib/libgdk_pixbuf-2.0.so) ===> jalv-select-1.2_1 depends on shared library: libglib-2.0.so - found (/usr/local/lib/libglib-2.0.so) ===> jalv-select-1.2_1 depends on shared library: libintl.so - found (/usr/local/lib/libintl.so) ===> jalv-select-1.2_1 depends on shared library: libglibmm-2.4.so - found (/usr/local/lib/libglibmm-2.4.so) ===> jalv-select-1.2_1 depends on shared library: libgtk-x11-2.0.so - found (/usr/local/lib/libgtk-x11-2.0.so) ===> jalv-select-1.2_1 depends on shared library: libgtkmm-2.4.so - not found ===> Installing existing package /packages/All/gtkmm24-2.24.5_1.txz Installing gtkmm24-2.24.5_1... `-- Installing pangomm-2.40.1_3... `-- Extracting pangomm-2.40.1_3: .......... done Extracting gtkmm24-2.24.5_1: .......... done ===> jalv-select-1.2_1 depends on shared library: libgtkmm-2.4.so - found (/usr/local/lib/libgtkmm-2.4.so) ===> Returning to build of jalv-select-1.2_1 ===> jalv-select-1.2_1 depends on shared library: libsigc-2.0.so - found (/usr/local/lib/libsigc-2.0.so) ===> jalv-select-1.2_1 depends on shared library: libxml++-2.6.so - found (/usr/local/lib/libxml++-2.6.so) ===> jalv-select-1.2_1 depends on shared library: libxml2.so - found (/usr/local/lib/libxml2.so) ===> jalv-select-1.2_1 depends on shared library: libpango-1.0.so - found (/usr/local/lib/libpango-1.0.so) ===> jalv-select-1.2_1 depends on shared library: libpangomm-1.4.so - found (/usr/local/lib/libpangomm-1.4.so) -------------------------------------------------------------------------------- -- Phase: configure -------------------------------------------------------------------------------- ===> Configuring for jalv-select-1.2_1 -------------------------------------------------------------------------------- -- Phase: build -------------------------------------------------------------------------------- ===> Building for jalv-select-1.2_1 gmake[1]: Entering directory '/construction/audio/jalv-select/jalv_select-1.2' grep: support for the -P option is not compiled into this --disable-perl-regexp binary c++ -pipe -O2 -fno-strict-aliasing -std=c++11 `pkg-config gtkmm-2.4 lilv-0 --cflags` jalv.select.cpp resources.c -lX11 `pkg-config gtkmm-2.4 lilv-0 --libs` -o jalv.select \033[1;34mbuild finish, now run make install \033[0m gmake[1]: Leaving directory '/construction/audio/jalv-select/jalv_select-1.2' -------------------------------------------------------------------------------- -- Phase: run-depends -------------------------------------------------------------------------------- ===> jalv-select-1.2_1 depends on executable: jalv - not found ===> Installing existing package /packages/All/jalv-1.6.0_4.txz Installing jalv-1.6.0_4... `-- Installing gtk3-3.24.10... | `-- Installing adwaita-icon-theme-3.28.0... | `-- Extracting adwaita-icon-theme-3.28.0: .......... done | `-- Installing at-spi2-atk-2.26.2... | | `-- Installing at-spi2-core-2.28.0... | | `-- Installing libXtst-1.2.3_2... | | `-- Extracting libXtst-1.2.3_2: .......... done | | `-- Installing libxkbcommon-0.8.4... | | | `-- Installing xkeyboard-config-2.27... | | | `-- Extracting xkeyboard-config-2.27: .......... done | | `-- Extracting libxkbcommon-0.8.4: .......... done | | `-- Extracting at-spi2-core-2.28.0: .......... done | `-- Extracting at-spi2-atk-2.26.2: .......... done | `-- Installing colord-1.3.5... | | `-- Installing argyllcms-1.9.2_4... | | `-- Installing libXScrnSaver-1.2.3_2... | | `-- Extracting libXScrnSaver-1.2.3_2: .......... done | | `-- Extracting argyllcms-1.9.2_4: .......... done | | `-- Installing lcms2-2.9... | | `-- Extracting lcms2-2.9: .......... done | | `-- Installing polkit-0.114_2... | | `-- Installing spidermonkey52-52.9.0_3... | | | `-- Installing icu-64.2,1... | | | `-- Extracting icu-64.2,1: .......... done | | | `-- Installing nspr-4.21... | | | `-- Extracting nspr-4.21: .......... done | | `-- Extracting spidermonkey52-52.9.0_3: .......... done ===> Creating groups. Creating group 'polkitd' with gid '565'. ===> Creating users Creating user 'polkitd' with uid '565'. | | `-- Extracting polkit-0.114_2: ......... done | | `-- Installing sqlite3-3.29.0... | | `-- Extracting sqlite3-3.29.0: .......... done ===> Creating groups. Creating group 'colord' with gid '970'. ===> Creating users Creating user 'colord' with uid '970'. | `-- Extracting colord-1.3.5: .......... done | `-- Installing libepoxy-1.5.2... | `-- Extracting libepoxy-1.5.2: .......... done | `-- Installing librsvg2-2.40.20... | | `-- Installing libcroco-0.6.12... | | `-- Extracting libcroco-0.6.12: .......... done | | `-- Installing libgsf-1.14.44... | | `-- Extracting libgsf-1.14.44: .......... done | `-- Extracting librsvg2-2.40.20: .......... done | `-- Installing wayland-protocols-1.17... | `-- Extracting wayland-protocols-1.17: .......... done `-- Extracting gtk3-3.24.10: .......... done `-- Installing jackit-0.125.0_8... | `-- Installing celt-0.11.3_3... | `-- Extracting celt-0.11.3_3: .......... done | `-- Installing db5-5.3.28_7... | `-- Extracting db5-5.3.28_7: .......... done | `-- Installing libsamplerate-0.1.9... | `-- Extracting libsamplerate-0.1.9: .......... done `-- Extracting jackit-0.125.0_8: .......... done `-- Installing qt5-core-5.12.2_1... | `-- Installing etc_os-release-0.1_2... | `-- Extracting etc_os-release-0.1_2: . done | `-- Installing pcre2-10.32_1... | `-- Extracting pcre2-10.32_1: .......... done | `-- Installing qtchooser-66... | `-- Extracting qtchooser-66: .......... done `-- Extracting qt5-core-5.12.2_1: .......... done `-- Installing qt5-gui-5.12.2... | `-- Installing qt5-dbus-5.12.2... | `-- Extracting qt5-dbus-5.12.2: .......... done | `-- Installing qt5-network-5.12.2_1... | `-- Extracting qt5-network-5.12.2_1: .......... done | `-- Installing xcb-util-image-0.4.0_1... | | `-- Installing xcb-util-0.4.0_2,1... | | `-- Extracting xcb-util-0.4.0_2,1: .......... done | `-- Extracting xcb-util-image-0.4.0_1: .......... done | `-- Installing xcb-util-keysyms-0.4.0_1... | `-- Extracting xcb-util-keysyms-0.4.0_1: ......... done | `-- Installing xcb-util-renderutil-0.3.9_1... | `-- Extracting xcb-util-renderutil-0.3.9_1: ......... done | `-- Installing xcb-util-wm-0.4.1_3... | `-- Extracting xcb-util-wm-0.4.1_3: .......... done | `-- Installing xdg-utils-1.1.3_1... | | `-- Installing xprop-1.2.4... | | `-- Extracting xprop-1.2.4: ..... done | | `-- Installing xset-1.2.4_2... | | `-- Installing libXfontcache-1.0.5_5... | | `-- Extracting libXfontcache-1.0.5_5: .......... done | | `-- Installing libXmu-1.1.3,1... | | | `-- Installing libXt-1.2.0,1... | | | `-- Extracting libXt-1.2.0,1: .......... done | | `-- Extracting libXmu-1.1.3,1: .......... done | | `-- Extracting xset-1.2.4_2: .. done | `-- Extracting xdg-utils-1.1.3_1: .......... done `-- Extracting qt5-gui-5.12.2: .......... done `-- Installing qt5-widgets-5.12.2... `-- Extracting qt5-widgets-5.12.2: .......... done `-- Installing suil-0.10.2_2... `-- Extracting suil-0.10.2_2: .......... done Extracting jalv-1.6.0_4: .......... done Message from jackit-0.125.0_8: ====================================================================== It is recommended to run Jack with real-time priority (-R). The recommended way to start Jack is to add the following lines to /etc/rc.conf: jackd_enable="YES" jackd_user="{your-jack-user}" jackd_rtprio="YES" jackd_args="-R -doss -r{sample-rate} -p1024 -n3 -w16 \ --capture /dev/dsp{N} --playback /dev/dsp{N}" Where: - your-jack-user: is the user who is going to use jack; currently only one user is supported - sample-rate: can be 44100, 48000, etc. - /dev/dsp{N}: your OSS devices, usually /dev/dsp0 Please note that the port option COOKEDMODE is "on" by default, which makes your system to automatically scale the sample-rate between Jack and audio hardware. One reason COOKEDMODE=on is because Jack's OSS driver doesn't support some sample-rate and hardware combinations when COOKEDMODE=off. To achieve the best sound quality please make sure your hardware natively supports the sample-rate set in jackd_args, and set COOKEDMODE=off. ====================================================================== Message from qtchooser-66: qtchooser is a wrapper that allows selecting whether Qt4 or Qt5 binaries for qmake, moc and other tools will be run when invoking the binaries in $PATH. By default, the Qt5 versions are run. It is possible to change the behavior by setting the QT_SELECT environment variable to "qt4". See qtchooser(1) for more information. ===> jalv-select-1.2_1 depends on executable: jalv - found ===> Returning to build of jalv-select-1.2_1 ===> jalv-select-1.2_1 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found -------------------------------------------------------------------------------- -- Phase: stage -------------------------------------------------------------------------------- ===> Staging for jalv-select-1.2_1 ===> Generating temporary packing list gmake[1]: Entering directory '/construction/audio/jalv-select/jalv_select-1.2' grep: support for the -P option is not compiled into this --disable-perl-regexp binary \033[1;34mbuild finish, now run make install \033[0m install jalv.select /construction/audio/jalv-select/stage/usr/local/bin cp jalv.select.desktop /construction/audio/jalv-select/stage/usr/local/share/applications cp lv2.png /construction/audio/jalv-select/stage/usr/local/share/pixmaps cp lv2_16.png /construction/audio/jalv-select/stage/usr/local/share/pixmaps cp jalv.select.1 /construction/audio/jalv-select/stage/usr/local/man/man1 cp jalv.select.fr.1 /construction/audio/jalv-select/stage/usr/local/man/man1 #cp --parents locale/fr_FR/LC_MESSAGES/jalv.select.mo locale/de_DE/LC_MESSAGES/jalv.select.mo /construction/audio/jalv-select/stage/usr/local/share gzip -f /construction/audio/jalv-select/stage/usr/local/man/man1/jalv.select.1 gzip -f /construction/audio/jalv-select/stage/usr/local/man/man1/jalv.select.fr.1 . . \033[1;34m, done\033[0m gmake[1]: Leaving directory '/construction/audio/jalv-select/jalv_select-1.2' ====> Compressing man pages (compress-man) -------------------------------------------------------------------------------- -- Phase: package -------------------------------------------------------------------------------- ===> Building package for jalv-select-1.2_1 file sizes/checksums [11]: . done packing files [11]: . done packing directories [0]: . done -------------------------------------------------- -- Termination -------------------------------------------------- Finished: Wednesday, 24 JUL 2019 at 15:02:48 UTC Duration: 00:01:45