=> Building deskutils/strigi Started : Wednesday, 5 DEC 2018 at 16:40:29 UTC Platform: 5.5-DEVELOPMENT DragonFly v5.5.0.25.g9bb66-DEVELOPMENT #33: Mon Dec 3 06:33:52 PST 2018 marino@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 -------------------------------------------------- -- Environment -------------------------------------------------- UNAME_r=5.4-SYNTH UNAME_m=x86_64 UNAME_p=x86_64 UNAME_v=DragonFly 5.4-SYNTH UNAME_s=DragonFly PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SSL_NO_VERIFY_PEER=1 TERM=dumb PKG_CACHEDIR=/var/cache/pkg8 PKG_DBDIR=/var/db/pkg8 PORTSDIR=/xports LANG=C HOME=/root USER=root -------------------------------------------------- -- Options -------------------------------------------------- ===> The following configuration options are available for strigi-0.7.8_4: CLIENT=on DAEMON=on UTILITIES=on ===> Use 'make config' to modify these settings -------------------------------------------------- -- CONFIGURE_ENV -------------------------------------------------- XDG_DATA_HOME=/construction/deskutils/strigi XDG_CONFIG_HOME=/construction/deskutils/strigi HOME=/construction/deskutils/strigi TMPDIR="/tmp" PATH=/construction/deskutils/strigi/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc80 -------------------------------------------------- -- CONFIGURE_ARGS -------------------------------------------------- -------------------------------------------------- -- MAKE_ENV -------------------------------------------------- XDG_DATA_HOME=/construction/deskutils/strigi XDG_CONFIG_HOME=/construction/deskutils/strigi HOME=/construction/deskutils/strigi TMPDIR="/tmp" PATH=/construction/deskutils/strigi/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc80 PREFIX=/usr/local LOCALBASE=/usr/local NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing " CPP="cpp" CPPFLAGS="" LDFLAGS=" -L/usr/local/lib -lclucene-shared " LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" -------------------------------------------------- -- MAKE_ARGS -------------------------------------------------- DESTDIR=/construction/deskutils/strigi/stage -------------------------------------------------- -- PLIST_SUB -------------------------------------------------- KDE_PREFIX="/usr/local" KDE_APPLICATIONS_VERSION="18.08.3" KDE4_VERSION="4.14.3" KDE4_GENERIC_LIB_VERSION=4.14.38 KDE4_NON_GENERIC_LIB_VERSION=5.14.38 KDE4_KDELIBS_VERSION=4.14.38 KDE4_NG_KDELIBS_VERSION=5.14.38 PYCACHE="" PYC_SUFFIX=pyc PYO_SUFFIX=pyo OSREL=5.4 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/strigi" EXAMPLESDIR="share/examples/strigi" DATADIR="share/strigi" WWWDIR="www/strigi" ETCDIR="etc/strigi" -------------------------------------------------- -- SUB_LIST -------------------------------------------------- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/strigi DOCSDIR=/usr/local/share/doc/strigi EXAMPLESDIR=/usr/local/share/examples/strigi WWWDIR=/usr/local/www/strigi ETCDIR=/usr/local/etc/strigi -------------------------------------------------- -- /etc/make.conf -------------------------------------------------- SYNTHPROFILE=Release-5.4 USE_PACKAGE_DEPENDS_ONLY=yes PACKAGE_BUILDING=yes BATCH=yes PKG_CREATE_VERBOSE=yes PORTSDIR=/xports DISTDIR=/distfiles WRKDIRPREFIX=/construction PORT_DBDIR=/options PACKAGES=/packages MAKE_JOBS_NUMBER_LIMIT=5 HAVE_COMPAT_IA32_KERN= CONFIGURE_MAX_CMD_LEN=262144 _PERL5_FROM_BIN=5.26.2 _ALTCCVERSION_921dbbb2=none _OBJC_ALTCCVERSION_921dbbb2=none _SMP_CPUS=8 UID=0 ARCH=x86_64 OPSYS=DragonFly DFLYVERSION=500400 OSVERSION=9999999 OSREL=5.4 _OSRELEASE=5.4-SYNTH PYTHONBASE=/usr/local _PKG_CHECKED=1 -------------------------------------------------------------------------------- -- Phase: check-sanity -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: pkg-depends -------------------------------------------------------------------------------- ===> strigi-0.7.8_4 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.10.5_5.txz Installing pkg-1.10.5_5... Extracting pkg-1.10.5_5: .......... done ===> strigi-0.7.8_4 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of strigi-0.7.8_4 -------------------------------------------------------------------------------- -- Phase: fetch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: fetch -------------------------------------------------------------------------------- ===> Fetching all distfiles required by strigi-0.7.8_4 for building -------------------------------------------------------------------------------- -- Phase: checksum -------------------------------------------------------------------------------- ===> Fetching all distfiles required by strigi-0.7.8_4 for building -------------------------------------------------------------------------------- -- Phase: extract-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: extract -------------------------------------------------------------------------------- ===> Fetching all distfiles required by strigi-0.7.8_4 for building ===> Extracting for strigi-0.7.8_4 ===> Fetching all distfiles required by strigi-0.7.8_4 for building -------------------------------------------------------------------------------- -- Phase: patch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: patch -------------------------------------------------------------------------------- ===> Patching for strigi-0.7.8_4 -------------------------------------------------------------------------------- -- Phase: build-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: lib-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: configure -------------------------------------------------------------------------------- ===> Configuring for strigi-0.7.8_4 -------------------------------------------------------------------------------- -- Phase: build -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: run-depends -------------------------------------------------------------------------------- ===> strigi-0.7.8_4 depends on file: /usr/local/lib/libstreamanalyzer.so.0 - not found ===> Installing existing package /packages/All/libstreamanalyzer-0.7.8_13.txz Installing libstreamanalyzer-0.7.8_13... `-- Installing clucene-2.3.3.4_15... `-- Extracting clucene-2.3.3.4_15: .......... done `-- Installing exiv2-0.26,1... | `-- Installing expat-2.2.6_1... | `-- Extracting expat-2.2.6_1: .......... done | `-- Installing gettext-runtime-0.19.8.1_2... | | `-- Installing indexinfo-0.3.1... | | `-- Extracting indexinfo-0.3.1: .... done | `-- Extracting gettext-runtime-0.19.8.1_2: .......... done `-- Extracting exiv2-0.26,1: .......... done `-- Installing ffmpeg-4.1,1... | `-- Installing fontconfig-2.12.6,1... | | `-- Installing freetype2-2.9.1... | | `-- Extracting freetype2-2.9.1: .......... done | `-- Extracting fontconfig-2.12.6,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | `-- Installing gmp-6.1.2_1... | `-- Extracting gmp-6.1.2_1: .......... done | `-- Installing gnutls-3.5.19_1... | | `-- Installing ca_root_nss-3.40... | | `-- Extracting ca_root_nss-3.40: ........ done | | `-- Installing libidn2-2.0.5_1... | | `-- Installing libunistring-0.9.10_1... | | `-- Extracting libunistring-0.9.10_1: .......... done | | `-- Extracting libidn2-2.0.5_1: .......... done | | `-- Installing libtasn1-4.13_1... | | `-- Extracting libtasn1-4.13_1: .......... done | | `-- Installing nettle-3.4_1... | | `-- Extracting nettle-3.4_1: .......... done | | `-- Installing p11-kit-0.23.14... | | `-- Installing libffi-3.2.1_3... | | `-- Extracting libffi-3.2.1_3: .......... done | | `-- Extracting p11-kit-0.23.14: .......... done | | `-- Installing trousers-0.3.14_2... | | `-- Installing libressl-2.8.2... | | `-- Extracting libressl-2.8.2: .......... done | | `-- Installing tpm-emulator-0.7.4_2... ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting tpm-emulator-0.7.4_2: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting trousers-0.3.14_2: .......... done | `-- Extracting gnutls-3.5.19_1: .......... done | `-- Installing libtheora-1.1.1_7... | | `-- Installing libogg-1.3.3,4... | | `-- Extracting libogg-1.3.3,4: .......... done | | `-- Installing libvorbis-1.3.6,3... | | `-- Extracting libvorbis-1.3.6,3: .......... done | `-- Extracting libtheora-1.1.1_7: .......... done | `-- Installing libv4l-1.6.3_4... | | `-- Installing jpeg-turbo-2.0.0... | | `-- Extracting jpeg-turbo-2.0.0: .......... done | `-- Extracting libv4l-1.6.3_4: .......... done | `-- Installing libva-2.3.0_1... | | `-- Installing libX11-1.6.6_1,1... | | `-- Installing libXau-1.0.8_5... | | `-- Extracting libXau-1.0.8_5: .......... done | | `-- Installing libXdmcp-1.1.2_2... | | | `-- Installing xorgproto-2018.4... | | | `-- Extracting xorgproto-2018.4: .......... done | | `-- Extracting libXdmcp-1.1.2_2: ......... done | | `-- Installing libxcb-1.13.1... | | | `-- Installing libpthread-stubs-0.4... | | | `-- Extracting libpthread-stubs-0.4: .... done | | | `-- Installing libxml2-2.9.7... | | | `-- Extracting libxml2-2.9.7: .......... done | | `-- Extracting libxcb-1.13.1: .......... done | | `-- Extracting libX11-1.6.6_1,1: .......... done | | `-- Installing libXext-1.3.3_3,1... | | `-- Extracting libXext-1.3.3_3,1: .......... done | | `-- Installing libXfixes-5.0.3_2... | | `-- Extracting libXfixes-5.0.3_2: .......... done | | `-- Installing libdrm-2.4.93,1... | | `-- Installing libpciaccess-0.13.5... | | | `-- Installing pciids-20181113... | | | `-- Extracting pciids-20181113: ..... done | | `-- Extracting libpciaccess-0.13.5: ......... done | | `-- Extracting libdrm-2.4.93,1: .......... done | | `-- Installing mesa-libs-18.1.9_4... | | `-- Installing libXdamage-1.1.4_5... | | `-- Extracting libXdamage-1.1.4_5: ......... done | | `-- Installing libXxf86vm-1.1.4_3... | | `-- Extracting libXxf86vm-1.1.4_3: .......... done | | `-- Installing libelf-0.8.13_3... | | `-- Extracting libelf-0.8.13_3: .......... done | | `-- Installing libxshmfence-1.2_4... | | `-- Extracting libxshmfence-1.2_4: ......... done | | `-- Installing wayland-1.16.0... | | `-- Extracting wayland-1.16.0: .......... done | | `-- Extracting mesa-libs-18.1.9_4: .......... done | | `-- Installing v4l_compat-1.6.3_2... | | `-- Extracting v4l_compat-1.6.3_2: .......... done | `-- Extracting libva-2.3.0_1: .......... done | `-- Installing libvdpau-1.1.1_2... | `-- Extracting libvdpau-1.1.1_2: .......... done | `-- Installing libvpx-1.7.0_2... | `-- Extracting libvpx-1.7.0_2: .......... done | `-- Installing libx264-0.155.2917... | `-- Extracting libx264-0.155.2917: ......... done | `-- Installing opencv-core-3.4.1_10... | `-- Extracting opencv-core-3.4.1_10: .......... done | `-- Installing opus-1.3... | `-- Extracting opus-1.3: .......... done | `-- Installing x265-2.8_1... | `-- Extracting x265-2.8_1: .......... done | `-- Installing xvid-1.3.5,1... | `-- Extracting xvid-1.3.5,1: ........ done `-- Extracting ffmpeg-4.1,1: .......... done `-- Installing libstreams-0.7.8_2... `-- Extracting libstreams-0.7.8_2: .......... done Extracting libstreamanalyzer-0.7.8_13: .......... done Message from freetype2-2.9.1: The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/ft2-toc.html, if documentation was installed). Message from ca_root_nss-3.40: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.14_2: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Message from opencv-core-3.4.1_10: ===> NOTICE: The opencv-core port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> strigi-0.7.8_4 depends on file: /usr/local/lib/libstreamanalyzer.so.0 - found ===> Returning to build of strigi-0.7.8_4 ===> strigi-0.7.8_4 depends on file: /usr/local/bin/strigiclient - not found ===> Installing existing package /packages/All/strigiclient-0.7.8_1.txz Installing strigiclient-0.7.8_1... `-- Installing qt4-corelib-4.8.7_14... | `-- Installing glib-2.56.3_1,1... | | `-- Installing libiconv-1.14_11... | | `-- Extracting libiconv-1.14_11: .......... done | | `-- Installing pcre-8.42... | | `-- Extracting pcre-8.42: .......... done | | `-- Installing python27-2.7.15... | | `-- Installing ncurses-6.1.20180728... | | `-- Extracting ncurses-6.1.20180728: .......... done | | `-- Installing readline-7.0.3_2... | | `-- Extracting readline-7.0.3_2: .......... done | | `-- Extracting python27-2.7.15: .......... done | `-- Extracting glib-2.56.3_1,1: .......... done No schema files found: doing nothing. | `-- Installing icu-63.1,1... | `-- Extracting icu-63.1,1: .......... done | `-- Installing qtchooser-66... | `-- Extracting qtchooser-66: .......... done `-- Extracting qt4-corelib-4.8.7_14: .......... done `-- Installing qt4-dbus-4.8.7_1... | `-- Installing dbus-1.10.16_1... | | `-- Installing libICE-1.0.9_3,1... | | `-- Extracting libICE-1.0.9_3,1: .......... done | | `-- Installing libSM-1.2.3,1... | | `-- Extracting libSM-1.2.3,1: .......... done ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | `-- Extracting dbus-1.10.16_1: ......... done | `-- Installing qt4-xml-4.8.7_2... | `-- Extracting qt4-xml-4.8.7_2: .......... done `-- Extracting qt4-dbus-4.8.7_1: .......... done `-- Installing qt4-gui-4.8.7_6... | `-- Installing cups-2.2.8_1... | | `-- Installing avahi-app-0.7_2... | | `-- Installing dbus-glib-0.108... | | `-- Extracting dbus-glib-0.108: .......... done | | `-- Installing gdbm-1.18.1... | | `-- Extracting gdbm-1.18.1: .......... done | | `-- Installing gnome_subr-1.0... | | `-- Extracting gnome_subr-1.0: .... done | | `-- Installing gobject-introspection-1.56.1,1... | | | `-- Installing python36-3.6.7... | | | `-- Extracting python36-3.6.7: .......... done | | `-- Extracting gobject-introspection-1.56.1,1: .......... done | | `-- Installing libdaemon-0.14_1... | | `-- Extracting libdaemon-0.14_1: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. | | `-- Extracting avahi-app-0.7_2: .......... done | | `-- Installing libpaper-1.1.24.4... | | `-- Extracting libpaper-1.1.24.4: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. | `-- Extracting cups-2.2.8_1: .......... done | `-- Installing encodings-1.0.4_4,1... | | `-- Installing font-util-1.3.1... | | `-- Extracting font-util-1.3.1: .......... done | `-- Extracting encodings-1.0.4_4,1: .......... done | `-- Installing libXcursor-1.1.15_2... | | `-- Installing libXrender-0.9.10_2... | | `-- Extracting libXrender-0.9.10_2: .......... done | `-- Extracting libXcursor-1.1.15_2: .......... done | `-- Installing libXi-1.7.9_2,1... | `-- Extracting libXi-1.7.9_2,1: .......... done | `-- Installing libXinerama-1.1.4_2,1... | `-- Extracting libXinerama-1.1.4_2,1: .......... done | `-- Installing libXrandr-1.5.1_2... | `-- Extracting libXrandr-1.5.1_2: .......... done | `-- Installing libXt-1.1.5_2,1... | `-- Extracting libXt-1.1.5_2,1: .......... done | `-- Installing png-1.6.35... | `-- Extracting png-1.6.35: .......... done | `-- Installing xdg-utils-1.1.1... | | `-- Installing hicolor-icon-theme-0.15... | | `-- Extracting hicolor-icon-theme-0.15: . done | | `-- Installing xprop-1.2.3... | | `-- Installing libXmu-1.1.2_5,1... | | `-- Extracting libXmu-1.1.2_5,1: .......... done | | `-- Extracting xprop-1.2.3: .. done | | `-- Installing xset-1.2.4_2... | | `-- Installing libXfontcache-1.0.5_5... | | `-- Extracting libXfontcache-1.0.5_5: .......... done | | `-- Extracting xset-1.2.4_2: .. done | `-- Extracting xdg-utils-1.1.1: .......... done | `-- Installing xorg-fonts-truetype-7.7_1... | | `-- Installing dejavu-2.37... | | `-- Installing mkfontdir-1.0.7... | | | `-- Installing mkfontscale-1.1.3_2... | | | `-- Installing libfontenc-1.1.3_3... | | | `-- Extracting libfontenc-1.1.3_3: ......... done | | | `-- Extracting mkfontscale-1.1.3_2: ..... done | | `-- Extracting mkfontdir-1.0.7: ..... done | | `-- Extracting dejavu-2.37: .......... done | | `-- Installing font-bh-ttf-1.0.3_3... | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | `-- Installing font-misc-ethiopic-1.0.3_3... | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | `-- Installing font-misc-meltho-1.0.3_3... | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done `-- Extracting qt4-gui-4.8.7_6: .......... done `-- Installing strigidaemon-0.7.8_3... | `-- Installing gamin-0.1.10_9... | `-- Extracting gamin-0.1.10_9: .......... done `-- Extracting strigidaemon-0.7.8_3: .......... done Extracting strigiclient-0.7.8_1: .......... done Message from python27-2.7.15: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== Message from qtchooser-66: qtchooser is a wrapper that allows selecting whether Qt4 or Qt5 binaries for qmake, moc and other tools will be run when invoking the binaries in $PATH. By default, the Qt5 versions are run. It is possible to change the behavior by setting the QT_SELECT environment variable to "qt4". See qtchooser(1) for more information. Message from qt4-corelib-4.8.7_14: ====================================================================== Qt 4 can be built with optional support for: - Common UNIX Printing System (CUPS) (enabled by default) - Network Audio System (NAS) - Qt style that renders using GTK (QGTKSTYLE) In order to enable them, you have to add QT4_OPTIONS= CUPS NAS QGTKSTYLE to your /etc/make.conf and compile devel/qt4-corelib and x11-toolkits/qt4-gui ports. Attention! Whenever you change the QT4_OPTIONS both devel/qt4-corelib and x11-toolkits/qt4-gui ports must be rebuilt! ====================================================================== Message from python36-3.6.7: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py36-gdbm databases/py-gdbm@py36 py36-sqlite3 databases/py-sqlite3@py36 py36-tkinter x11-toolkits/py-tkinter@py36 =========================================================================== Message from dejavu-2.37: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from gamin-0.1.10_9: =============================================================================== Gamin will only provide realtime notification of changes for at most n files, where n is the minimum value between (kern.maxfiles * 0.7) and (kern.maxfilesperproc - 200). Beyond that limit, files will be polled. If you often open several large folders with Nautilus, you might want to increase the kern.maxfiles tunable (you do not need to set kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles). For a typical desktop, add the following line to /boot/loader.conf, then reboot the system: kern.maxfiles="25000" The behavior of gamin can be controlled via the various gaminrc files. See http://www.gnome.org/~veillard/gamin/config.html on how to create these files. In particular, if you find gam_server is taking up too much CPU time polling for changes, something like the following may help in one of the gaminrc files: # reduce polling frequency to once per 10 seconds # for UFS file systems in order to lower CPU load fsset ufs poll 10 =============================================================================== ===> NOTICE: The gamin port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> strigi-0.7.8_4 depends on file: /usr/local/bin/strigiclient - found ===> Returning to build of strigi-0.7.8_4 ===> strigi-0.7.8_4 depends on file: /usr/local/bin/strigidaemon - found ===> strigi-0.7.8_4 depends on file: /usr/local/bin/xmlindexer - not found ===> Installing existing package /packages/All/strigiutils-0.7.8_1.txz Installing strigiutils-0.7.8_1... Extracting strigiutils-0.7.8_1: .... done ===> strigi-0.7.8_4 depends on file: /usr/local/bin/xmlindexer - found ===> Returning to build of strigi-0.7.8_4 -------------------------------------------------------------------------------- -- Phase: stage -------------------------------------------------------------------------------- ===> Staging for strigi-0.7.8_4 ===> Generating temporary packing list ====> Compressing man pages (compress-man) -------------------------------------------------------------------------------- -- Phase: package -------------------------------------------------------------------------------- ===> Building package for strigi-0.7.8_4 file sizes/checksums [0]: . done packing files [0]: . done packing directories [0]: . done -------------------------------------------------- -- Termination -------------------------------------------------- Finished: Wednesday, 5 DEC 2018 at 16:41:21 UTC Duration: 00:00:52