=> Building www/npapi-xine Started : Saturday, 21 JUL 2018 at 01:37:42 UTC Platform: 5.3-DEVELOPMENT DragonFly v5.3.0.242.g757c0-DEVELOPMENT #30: Tue May 8 14:06:27 PDT 2018 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 -------------------------------------------------- -- Environment -------------------------------------------------- UNAME_r=5.2-SYNTH UNAME_m=x86_64 UNAME_p=x86_64 UNAME_v=DragonFly 5.2-SYNTH UNAME_s=DragonFly PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SSL_NO_VERIFY_PEER=1 TERM=dumb PKG_CACHEDIR=/var/cache/pkg8 PKG_DBDIR=/var/db/pkg8 PORTSDIR=/xports LANG=C HOME=/root USER=root -------------------------------------------------- -- Options -------------------------------------------------- -------------------------------------------------- -- CONFIGURE_ENV -------------------------------------------------- PKG_CONFIG=pkgconf XDG_DATA_HOME=/construction/www/npapi-xine XDG_CONFIG_HOME=/construction/www/npapi-xine HOME=/construction/www/npapi-xine TMPDIR="/tmp" PATH=/construction/www/npapi-xine/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 CONFIG_SITE=/xports/Templates/config.site lt_cv_sys_max_cmd_len=262144 -------------------------------------------------- -- CONFIGURE_ARGS -------------------------------------------------- --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} -------------------------------------------------- -- MAKE_ENV -------------------------------------------------- XDG_DATA_HOME=/construction/www/npapi-xine XDG_CONFIG_HOME=/construction/www/npapi-xine HOME=/construction/www/npapi-xine TMPDIR="/tmp" PATH=/construction/www/npapi-xine/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" -------------------------------------------------- -- MAKE_ARGS -------------------------------------------------- DESTDIR=/construction/www/npapi-xine/stage -------------------------------------------------- -- PLIST_SUB -------------------------------------------------- PORTDOCS="" PORTEXAMPLES="" WEBPLUGIN_DIR="lib/browser_plugins/" OSREL=5.2 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/xine" EXAMPLESDIR="share/examples/xine" DATADIR="share/xine" WWWDIR="www/xine" ETCDIR="etc/xine" -------------------------------------------------- -- SUB_LIST -------------------------------------------------- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/xine DOCSDIR=/usr/local/share/doc/xine EXAMPLESDIR=/usr/local/share/examples/xine WWWDIR=/usr/local/www/xine ETCDIR=/usr/local/etc/xine -------------------------------------------------- -- /etc/make.conf -------------------------------------------------- SYNTHPROFILE=Release-5.2 USE_PACKAGE_DEPENDS_ONLY=yes PACKAGE_BUILDING=yes BATCH=yes PKG_CREATE_VERBOSE=yes PORTSDIR=/xports DISTDIR=/distfiles WRKDIRPREFIX=/construction PORT_DBDIR=/options PACKAGES=/packages MAKE_JOBS_NUMBER_LIMIT=5 LICENSES_ACCEPTED= NONE HAVE_COMPAT_IA32_KERN= CONFIGURE_MAX_CMD_LEN=262144 _PERL5_FROM_BIN=5.26.1 _ALTCCVERSION_921dbbb2=none _OBJC_ALTCCVERSION_921dbbb2=none _SMP_CPUS=8 UID=0 ARCH=x86_64 OPSYS=DragonFly DFLYVERSION=500200 OSVERSION=9999999 OSREL=5.2 _OSRELEASE=5.2-SYNTH PYTHONBASE=/usr/local _PKG_CHECKED=1 -------------------------------------------------------------------------------- -- Phase: check-sanity -------------------------------------------------------------------------------- ===> NOTICE: The xine port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port -------------------------------------------------------------------------------- -- Phase: pkg-depends -------------------------------------------------------------------------------- ===> npapi-xine-1.0.2_11 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.10.5_1.txz Installing pkg-1.10.5_1... Extracting pkg-1.10.5_1: .......... done ===> npapi-xine-1.0.2_11 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of npapi-xine-1.0.2_11 -------------------------------------------------------------------------------- -- Phase: fetch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: fetch -------------------------------------------------------------------------------- ===> NOTICE: The xine port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> Fetching all distfiles required by npapi-xine-1.0.2_11 for building -------------------------------------------------------------------------------- -- Phase: checksum -------------------------------------------------------------------------------- ===> NOTICE: The xine port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> Fetching all distfiles required by npapi-xine-1.0.2_11 for building => SHA256 Checksum OK for xine-plugin-1.0.2.tar.bz2. -------------------------------------------------------------------------------- -- Phase: extract-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: extract -------------------------------------------------------------------------------- ===> NOTICE: The xine port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> Fetching all distfiles required by npapi-xine-1.0.2_11 for building ===> Extracting for npapi-xine-1.0.2_11 => SHA256 Checksum OK for xine-plugin-1.0.2.tar.bz2. -------------------------------------------------------------------------------- -- Phase: patch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: patch -------------------------------------------------------------------------------- ===> Patching for npapi-xine-1.0.2_11 -------------------------------------------------------------------------------- -- Phase: build-depends -------------------------------------------------------------------------------- ===> npapi-xine-1.0.2_11 depends on package: pkgconf>=1.3.0_1 - not found ===> Installing existing package /packages/All/pkgconf-1.4.2,1.txz Installing pkgconf-1.4.2,1... Extracting pkgconf-1.4.2,1: .......... done ===> npapi-xine-1.0.2_11 depends on package: pkgconf>=1.3.0_1 - found ===> Returning to build of npapi-xine-1.0.2_11 -------------------------------------------------------------------------------- -- Phase: lib-depends -------------------------------------------------------------------------------- ===> npapi-xine-1.0.2_11 depends on shared library: libxine.so - not found ===> Installing existing package /packages/All/libxine-1.2.6_18.txz Installing libxine-1.2.6_18... `-- Installing faad2-2.8.8,1... `-- Extracting faad2-2.8.8,1: .......... done `-- Installing ffmpeg-4.0.1,1... | `-- Installing fontconfig-2.12.6,1... | | `-- Installing expat-2.2.5... | | `-- Extracting expat-2.2.5: .......... done | | `-- Installing freetype2-2.9.1... | | `-- Extracting freetype2-2.9.1: .......... done | `-- Extracting fontconfig-2.12.6,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | `-- Installing gmp-6.1.2... | | `-- Installing indexinfo-0.3.1... | | `-- Extracting indexinfo-0.3.1: .... done | `-- Extracting gmp-6.1.2: .......... done | `-- Installing gnutls-3.5.18... | | `-- Installing ca_root_nss-3.38... | | `-- Extracting ca_root_nss-3.38: ........ done | | `-- Installing gettext-runtime-0.19.8.1_1... | | `-- Extracting gettext-runtime-0.19.8.1_1: .......... done | | `-- Installing libidn2-2.0.5... | | `-- Installing libunistring-0.9.10... | | `-- Extracting libunistring-0.9.10: .......... done | | `-- Extracting libidn2-2.0.5: .......... done | | `-- Installing libtasn1-4.13... | | `-- Extracting libtasn1-4.13: .......... done | | `-- Installing nettle-3.4... | | `-- Extracting nettle-3.4: .......... done | | `-- Installing p11-kit-0.23.12... | | `-- Installing libffi-3.2.1_2... | | `-- Extracting libffi-3.2.1_2: .......... done | | `-- Extracting p11-kit-0.23.12: .......... done | | `-- Installing trousers-0.3.14_2... | | `-- Installing libressl-2.7.4... | | `-- Extracting libressl-2.7.4: .......... done | | `-- Installing tpm-emulator-0.7.4_2... ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting tpm-emulator-0.7.4_2: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting trousers-0.3.14_2: .......... done | `-- Extracting gnutls-3.5.18: .......... done | `-- Installing libtheora-1.1.1_7... | | `-- Installing libogg-1.3.3,4... | | `-- Extracting libogg-1.3.3,4: .......... done | | `-- Installing libvorbis-1.3.6,3... | | `-- Extracting libvorbis-1.3.6,3: .......... done | `-- Extracting libtheora-1.1.1_7: .......... done | `-- Installing libv4l-1.6.3_2... | | `-- Installing jpeg-turbo-1.5.3... | | `-- Extracting jpeg-turbo-1.5.3: .......... done | `-- Extracting libv4l-1.6.3_2: .......... done | `-- Installing libva-2.1.0... | | `-- Installing libX11-1.6.5,1... | | `-- Installing kbproto-1.0.7... | | `-- Extracting kbproto-1.0.7: .......... done | | `-- Installing libXau-1.0.8_3... | | | `-- Installing xproto-7.0.31... | | | `-- Extracting xproto-7.0.31: .......... done | | `-- Extracting libXau-1.0.8_3: .......... done | | `-- Installing libXdmcp-1.1.2... | | `-- Extracting libXdmcp-1.1.2: ......... done | | `-- Installing libxcb-1.13... | | | `-- Installing libpthread-stubs-0.4... | | | `-- Extracting libpthread-stubs-0.4: .... done | | | `-- Installing libxml2-2.9.7... | | | `-- Extracting libxml2-2.9.7: .......... done | | `-- Extracting libxcb-1.13: .......... done | | `-- Extracting libX11-1.6.5,1: .......... done | | `-- Installing libXext-1.3.3_1,1... | | `-- Installing xextproto-7.3.0... | | `-- Extracting xextproto-7.3.0: .......... done | | `-- Extracting libXext-1.3.3_1,1: .......... done | | `-- Installing libXfixes-5.0.3... | | `-- Installing fixesproto-5.0... | | `-- Extracting fixesproto-5.0: .... done | | `-- Extracting libXfixes-5.0.3: .......... done | | `-- Installing libdrm-2.4.92,1... | | `-- Installing libpciaccess-0.13.5... | | | `-- Installing pciids-20180428... | | | `-- Extracting pciids-20180428: ..... done | | `-- Extracting libpciaccess-0.13.5: ......... done | | `-- Extracting libdrm-2.4.92,1: .......... done | | `-- Installing mesa-libs-18.1.2... | | `-- Installing libXdamage-1.1.4_3... | | | `-- Installing damageproto-1.2.1... | | | `-- Extracting damageproto-1.2.1: .... done | | `-- Extracting libXdamage-1.1.4_3: ...... done | | `-- Installing libXxf86vm-1.1.4_1... | | | `-- Installing xf86vidmodeproto-2.3.1... | | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | | `-- Installing libelf-0.8.13_3... | | `-- Extracting libelf-0.8.13_3: .......... done | | `-- Installing libxshmfence-1.2_2... | | `-- Extracting libxshmfence-1.2_2: ......... done | | `-- Extracting mesa-libs-18.1.2: .......... done | | `-- Installing v4l_compat-1.6.3_1... | | `-- Extracting v4l_compat-1.6.3_1: .......... done | `-- Extracting libva-2.1.0: .......... done | `-- Installing libvdpau-1.1.1... | `-- Extracting libvdpau-1.1.1: .......... done | `-- Installing libvpx-1.7.0... | `-- Extracting libvpx-1.7.0: .......... done | `-- Installing libx264-0.152.2854... | `-- Extracting libx264-0.152.2854: ......... done | `-- Installing opencv-core-3.4.1_1... | | `-- Installing protobuf-3.5.2,1... | | `-- Extracting protobuf-3.5.2,1: .......... done | | `-- Installing tesseract-3.05.02_1... | | `-- Installing cairo-1.14.8_1,2... | | | `-- Installing dri2proto-2.8... | | | `-- Extracting dri2proto-2.8: .... done | | | `-- Installing glib-2.50.3_4,1... | | | `-- Installing libiconv-1.14_11... | | | `-- Extracting libiconv-1.14_11: .......... done | | | `-- Installing pcre-8.42... | | | `-- Extracting pcre-8.42: .......... done | | | `-- Installing perl5-5.26.2... | | | `-- Extracting perl5-5.26.2: .......... done | | | `-- Installing python27-2.7.15... | | | | `-- Installing ncurses-6.0.0s20171223_1... | | | | `-- Extracting ncurses-6.0.0s20171223_1: .......... done | | | | `-- Installing readline-7.0.3_1... | | | | `-- Extracting readline-7.0.3_1: .......... done | | | `-- Extracting python27-2.7.15: .......... done | | | `-- Extracting glib-2.50.3_4,1: .......... done No schema files found: doing nothing. | | | `-- Installing glproto-1.4.17... | | | `-- Extracting glproto-1.4.17: ...... done | | | `-- Installing libXrender-0.9.10... | | | `-- Installing renderproto-0.11.1... | | | `-- Extracting renderproto-0.11.1: .... done | | | `-- Extracting libXrender-0.9.10: .......... done | | | `-- Installing pixman-0.34.0... | | | `-- Extracting pixman-0.34.0: .......... done | | | `-- Installing png-1.6.34... | | | `-- Extracting png-1.6.34: .......... done | | | `-- Installing xcb-util-renderutil-0.3.9_1... | | | `-- Installing xcb-util-0.4.0_2,1... | | | `-- Extracting xcb-util-0.4.0_2,1: .......... done | | | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done | | `-- Extracting cairo-1.14.8_1,2: .......... done | | `-- Installing icu-62.1_1,1... | | `-- Extracting icu-62.1_1,1: .......... done | | `-- Installing leptonica-1.76.0... | | | `-- Installing giflib-5.1.4... | | | `-- Extracting giflib-5.1.4: .......... done | | | `-- Installing openjpeg-2.3.0... | | | `-- Installing lcms2-2.9... | | | | `-- Installing tiff-4.0.9_1... | | | | `-- Installing jbigkit-2.1_1... | | | | `-- Extracting jbigkit-2.1_1: .......... done | | | | `-- Extracting tiff-4.0.9_1: .......... done | | | `-- Extracting lcms2-2.9: .......... done | | | `-- Extracting openjpeg-2.3.0: .......... done | | | `-- Installing webp-1.0.0... | | | `-- Extracting webp-1.0.0: .......... done | | `-- Extracting leptonica-1.76.0: .......... done | | `-- Installing pango-1.42.0... | | | `-- Installing encodings-1.0.4_4,1... | | | `-- Installing font-util-1.3.1... | | | `-- Extracting font-util-1.3.1: .......... done | | | `-- Extracting encodings-1.0.4_4,1: .......... done | | | `-- Installing fribidi-0.19.7... | | | `-- Extracting fribidi-0.19.7: .......... done | | | `-- Installing harfbuzz-1.8.2... | | | `-- Installing graphite2-1.3.11... | | | `-- Extracting graphite2-1.3.11: .......... done | | | `-- Extracting harfbuzz-1.8.2: .......... done | | | `-- Installing libXft-2.3.2_1... | | | `-- Extracting libXft-2.3.2_1: .......... done | | | `-- Installing xorg-fonts-truetype-7.7_1... | | | `-- Installing dejavu-2.37... | | | | `-- Installing mkfontdir-1.0.7... | | | | `-- Installing mkfontscale-1.1.3... | | | | | `-- Installing libfontenc-1.1.3_1... | | | | | `-- Extracting libfontenc-1.1.3_1: ......... done | | | | `-- Extracting mkfontscale-1.1.3: ..... done | | | | `-- Extracting mkfontdir-1.0.7: ..... done | | | `-- Extracting dejavu-2.37: .......... done | | | `-- Installing font-bh-ttf-1.0.3_3... | | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | | `-- Installing font-misc-ethiopic-1.0.3_3... | | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | | `-- Installing font-misc-meltho-1.0.3_3... | | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done | | `-- Extracting pango-1.42.0: .......... done | | `-- Installing tesseract-data-3.04.00... | | `-- Extracting tesseract-data-3.04.00: .......... done | | `-- Extracting tesseract-3.05.02_1: .......... done | `-- Extracting opencv-core-3.4.1_1: .......... done | `-- Installing opus-1.2.1... | `-- Extracting opus-1.2.1: .......... done | `-- Installing x265-2.6_1... | `-- Extracting x265-2.6_1: .......... done | `-- Installing xvid-1.3.5,1... | `-- Extracting xvid-1.3.5,1: ........ done `-- Extracting ffmpeg-4.0.1,1: .......... done `-- Installing flac-1.3.2... `-- Extracting flac-1.3.2: .......... done `-- Installing libGLU-9.0.0_3... `-- Extracting libGLU-9.0.0_3: ...... done `-- Installing libICE-1.0.9_1,1... `-- Extracting libICE-1.0.9_1,1: .......... done `-- Installing libSM-1.2.2_3,1... `-- Extracting libSM-1.2.2_3,1: .......... done `-- Installing libXinerama-1.1.3_3,1... | `-- Installing xineramaproto-1.2.1... | `-- Extracting xineramaproto-1.2.1: .. done `-- Extracting libXinerama-1.1.3_3,1: .......... done `-- Installing libXv-1.0.11,1... | `-- Installing videoproto-2.3.3... | `-- Extracting videoproto-2.3.3: ......... done `-- Extracting libXv-1.0.11,1: .......... done `-- Installing liba52-0.7.4_3... `-- Extracting liba52-0.7.4_3: .......... done `-- Installing libcdio-paranoia-10.2+0.94+1_1... | `-- Installing libcdio-2.0.0... | | `-- Installing libcddb-1.3.2_4... | | `-- Extracting libcddb-1.3.2_4: .......... done | `-- Extracting libcdio-2.0.0: .......... done `-- Extracting libcdio-paranoia-10.2+0.94+1_1: .......... done `-- Installing libdca-0.0.6... `-- Extracting libdca-0.0.6: .......... done `-- Installing libdvdread-6.0.0... `-- Extracting libdvdread-6.0.0: .......... done `-- Installing libfame-0.9.1_5... `-- Extracting libfame-0.9.1_5: .......... done `-- Installing libmad-0.15.1b_6... `-- Extracting libmad-0.15.1b_6: ......... done `-- Installing libmng-1.0.10_3... | `-- Installing lcms-1.19_6,1... | `-- Extracting lcms-1.19_6,1: .......... done `-- Extracting libmng-1.0.10_3: ......... done `-- Installing libmodplug-0.8.9.0... `-- Extracting libmodplug-0.8.9.0: .......... done `-- Installing sdl-1.2.15_10,2... | `-- Installing aalib-1.4.r5_11... | `-- Extracting aalib-1.4.r5_11: .......... done | `-- Installing libXrandr-1.5.1... | | `-- Installing randrproto-1.5.0... | | `-- Extracting randrproto-1.5.0: ....... done | `-- Extracting libXrandr-1.5.1: .......... done `-- Extracting sdl-1.2.15_10,2: .......... done `-- Installing speex-1.2.0,1... | `-- Installing speexdsp-1.2.r3_1... | `-- Extracting speexdsp-1.2.r3_1: .......... done `-- Extracting speex-1.2.0,1: .......... done `-- Installing vcdimager-2.0.1... | `-- Installing popt-1.16_2... | `-- Extracting popt-1.16_2: .......... done `-- Extracting vcdimager-2.0.1: .......... done Extracting libxine-1.2.6_18: .......... done Message from freetype2-2.9.1: The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/ft2-toc.html, if documentation was installed). Message from ca_root_nss-3.38: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.14_2: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Message from perl5-5.26.2: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Message from python27-2.7.15: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== Message from leptonica-1.76.0: To use gplot (the optional programmatic interface to gnuplot), the math/gnuplot port must be installed. Message from dejavu-2.37: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from opencv-core-3.4.1_1: ===> NOTICE: The opencv-core port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from libdca-0.0.6: ===> NOTICE: The libdca port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from aalib-1.4.r5_11: ===> NOTICE: The aalib port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from sdl-1.2.15_10,2: ------------------------------------------------------------------------------ Your SDL library has been built with libvgl support, which means that you can run almost any SDL application straight on your console (VESA 2.0 compatible videocard is required). To do this you have to load the vesa kernel module or enable it in your kernel, and set environment variable "SDL_VIDEODRIVER=vgl". ------------------------------------------------------------------------------ Message from libxine-1.2.6_18: ===> NOTICE: The libxine port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> npapi-xine-1.0.2_11 depends on shared library: libxine.so - found (/usr/local/lib/libxine.so) ===> Returning to build of npapi-xine-1.0.2_11 -------------------------------------------------------------------------------- -- Phase: configure -------------------------------------------------------------------------------- ===> Configuring for npapi-xine-1.0.2_11 configure: loading site script /xports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether make sets $(MAKE)... yes checking for gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking build system type... x86_64-portbld-dragonfly5.2 checking host system type... x86_64-portbld-dragonfly5.2 checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cpp checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for dlfcn.h... (cached) yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse /usr/bin/nm -B output from cc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly5.2 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly5.2 ld.so (cached) (cached) checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking pkg-config is at least version 0.9.0... yes checking for X... libraries /usr/local/lib, headers /usr/local/include checking for X... yes checking for XINE... yes checking for pthread_create in -lpthread... yes configure: creating ./config.status config.status: creating Makefile config.status: creating include/Makefile config.status: creating include/obsolete/Makefile config.status: creating m4/Makefile config.status: creating src/Makefile config.status: creating demo/Makefile config.status: creating misc/Makefile config.status: creating misc/xine-plugin.spec config.status: creating misc/build_rpms.sh config.status: creating config.h config.status: executing depfiles commands config.status: executing default commands ---------------------------------------------------------------------- The plugin will be installed in: /construction/www/npapi-xine/.mozilla/plugins ---------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: build -------------------------------------------------------------------------------- ===> Building for npapi-xine-1.0.2_11 --- all --- /usr/bin/make all-recursive --- all-recursive --- Making all in include --- all-recursive --- Making all in obsolete Making all in m4 Making all in src --- plugin.lo --- --- playlist.lo --- --- npentry.lo --- --- plugin.lo --- /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -D_GNU_SOURCE -pipe -O2 -fno-strict-aliasing -DXP_UNIX -Wall -I/usr/local/include -MT plugin.lo -MD -MP -MF .deps/plugin.Tpo -c -o plugin.lo plugin.c --- playlist.lo --- /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -D_GNU_SOURCE -pipe -O2 -fno-strict-aliasing -DXP_UNIX -Wall -I/usr/local/include -MT playlist.lo -MD -MP -MF .deps/playlist.Tpo -c -o playlist.lo playlist.c --- npentry.lo --- /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -D_GNU_SOURCE -pipe -O2 -fno-strict-aliasing -DXP_UNIX -Wall -I/usr/local/include -MT npentry.lo -MD -MP -MF .deps/npentry.Tpo -c -o npentry.lo npentry.c --- plugin.lo --- mkdir .libs cc -DHAVE_CONFIG_H -I. -I.. -I../include -D_GNU_SOURCE -pipe -O2 -fno-strict-aliasing -DXP_UNIX -Wall -I/usr/local/include -MT plugin.lo -MD -MP -MF .deps/plugin.Tpo -c plugin.c -fPIC -DPIC -o .libs/plugin.o plugin.c: In function 'event_listner_cb': plugin.c:693:9: warning: 'xine_mrl_reference_data_t' is deprecated [-Wdeprecated-declarations] xine_mrl_reference_data_t *ref = event->data; ^ In file included from plugin.c:52:0: /usr/local/include/xine.h:1983:9: note: declared here typedef struct { ^ In file included from plugin.c:53:0: plugin.c: At top level: /usr/local/include/xine/xineutils.h:149:13: warning: '_x_freep' defined but not used [-Wunused-function] static void _x_freep(void *ptr) { ^ --- playlist.lo --- cc -DHAVE_CONFIG_H -I. -I.. -I../include -D_GNU_SOURCE -pipe -O2 -fno-strict-aliasing -DXP_UNIX -Wall -I/usr/local/include -MT playlist.lo -MD -MP -MF .deps/playlist.Tpo -c playlist.c -fPIC -DPIC -o .libs/playlist.o playlist.c: In function 'asx_playlist_parse': playlist.c:172:3: warning: 'xml_parser_init' is deprecated [-Wdeprecated-declarations] xml_parser_init (ptr, size, XML_PARSER_CASE_INSENSITIVE); ^ In file included from /usr/local/include/xine/xineutils.h:40:0, from playlist.c:40: /usr/local/include/xine/xmlparser.h:78:6: note: declared here void xml_parser_init(const char * buf, int size, int mode) XINE_DEPRECATED XINE_PROTECTED; ^ playlist.c:174:3: warning: 'xml_parser_build_tree' is deprecated [-Wdeprecated-declarations] if (xml_parser_build_tree (&root) >= 0) { ^ In file included from /usr/local/include/xine/xineutils.h:40:0, from playlist.c:40: /usr/local/include/xine/xmlparser.h:82:5: note: declared here int xml_parser_build_tree(xml_node_t **root_node) XINE_DEPRECATED XINE_PROTECTED; ^ playlist.c: In function 'smil_playlist_parse': playlist.c:240:3: warning: 'xml_parser_init' is deprecated [-Wdeprecated-declarations] xml_parser_init (ptr, size, XML_PARSER_CASE_SENSITIVE); ^ In file included from /usr/local/include/xine/xineutils.h:40:0, from playlist.c:40: /usr/local/include/xine/xmlparser.h:78:6: note: declared here void xml_parser_init(const char * buf, int size, int mode) XINE_DEPRECATED XINE_PROTECTED; ^ playlist.c:242:3: warning: 'xml_parser_build_tree' is deprecated [-Wdeprecated-declarations] if (xml_parser_build_tree (&root) >= 0) { ^ In file included from /usr/local/include/xine/xineutils.h:40:0, from playlist.c:40: /usr/local/include/xine/xmlparser.h:82:5: note: declared here int xml_parser_build_tree(xml_node_t **root_node) XINE_DEPRECATED XINE_PROTECTED; ^ playlist.c: In function 'xspf_playlist_parse': playlist.c:300:3: warning: 'xml_parser_init' is deprecated [-Wdeprecated-declarations] xml_parser_init (ptr, size, XML_PARSER_CASE_SENSITIVE); ^ In file included from /usr/local/include/xine/xineutils.h:40:0, from playlist.c:40: /usr/local/include/xine/xmlparser.h:78:6: note: declared here void xml_parser_init(const char * buf, int size, int mode) XINE_DEPRECATED XINE_PROTECTED; ^ playlist.c:302:3: warning: 'xml_parser_build_tree' is deprecated [-Wdeprecated-declarations] if (xml_parser_build_tree (&root) >= 0) { ^ In file included from /usr/local/include/xine/xineutils.h:40:0, from playlist.c:40: /usr/local/include/xine/xmlparser.h:82:5: note: declared here int xml_parser_build_tree(xml_node_t **root_node) XINE_DEPRECATED XINE_PROTECTED; ^ playlist.c: In function 'qtl_playlist_parse': playlist.c:355:3: warning: 'xml_parser_init' is deprecated [-Wdeprecated-declarations] xml_parser_init (ptr, size, XML_PARSER_CASE_SENSITIVE); ^ In file included from /usr/local/include/xine/xineutils.h:40:0, from playlist.c:40: /usr/local/include/xine/xmlparser.h:78:6: note: declared here void xml_parser_init(const char * buf, int size, int mode) XINE_DEPRECATED XINE_PROTECTED; ^ playlist.c:357:3: warning: 'xml_parser_build_tree' is deprecated [-Wdeprecated-declarations] if (xml_parser_build_tree (&root) >= 0) { ^ In file included from /usr/local/include/xine/xineutils.h:40:0, from playlist.c:40: /usr/local/include/xine/xmlparser.h:82:5: note: declared here int xml_parser_build_tree(xml_node_t **root_node) XINE_DEPRECATED XINE_PROTECTED; ^ In file included from playlist.c:40:0: playlist.c: At top level: /usr/local/include/xine/xineutils.h:149:13: warning: '_x_freep' defined but not used [-Wunused-function] static void _x_freep(void *ptr) { ^ --- plugin.lo --- mv -f .deps/plugin.Tpo .deps/plugin.Plo --- playlist.lo --- mv -f .deps/playlist.Tpo .deps/playlist.Plo --- npentry.lo --- cc -DHAVE_CONFIG_H -I. -I.. -I../include -D_GNU_SOURCE -pipe -O2 -fno-strict-aliasing -DXP_UNIX -Wall -I/usr/local/include -MT npentry.lo -MD -MP -MF .deps/npentry.Tpo -c npentry.c -fPIC -DPIC -o .libs/npentry.o mv -f .deps/npentry.Tpo .deps/npentry.Plo --- xineplugin.la --- /bin/sh ../libtool --tag=CC --mode=link cc -D_GNU_SOURCE -pipe -O2 -fno-strict-aliasing -DXP_UNIX -Wall -I/usr/local/include -avoid-version -module -o xineplugin.la -rpath /construction/www/npapi-xine/.mozilla/plugins plugin.lo playlist.lo npentry.lo -lpthread -L/usr/local/lib -lxine -L/usr/local/lib -lX11 cc -shared .libs/plugin.o .libs/playlist.o .libs/npentry.o -Wl,--rpath -Wl,/usr/local/lib -Wl,--rpath -Wl,/usr/local/lib -lpthread -L/usr/local/lib /usr/local/lib/libxine.so -lX11 -Wl,-soname -Wl,xineplugin.so -o .libs/xineplugin.so creating xineplugin.la (cd .libs && rm -f xineplugin.la && ln -s ../xineplugin.la xineplugin.la) Making all in demo Making all in misc -------------------------------------------------------------------------------- -- Phase: run-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: stage -------------------------------------------------------------------------------- ===> Staging for npapi-xine-1.0.2_11 ===> Generating temporary packing list /bin/mkdir -p /construction/www/npapi-xine/stage/usr/local/lib/browser_plugins/ install -s -m 0644 /construction/www/npapi-xine/xine-plugin-1.0.2/src/.libs/xineplugin.so /construction/www/npapi-xine/stage/usr/local/lib/browser_plugins/ /bin/mkdir -p /construction/www/npapi-xine/stage/usr/local/lib/browser_plugins/symlinks/gecko ln -sf /usr/local/lib/browser_plugins//xineplugin.so /construction/www/npapi-xine/stage/usr/local/lib/browser_plugins/symlinks/gecko/ /bin/mkdir -p /construction/www/npapi-xine/stage/usr/local/lib/browser_plugins/symlinks/opera ln -sf /usr/local/lib/browser_plugins//xineplugin.so /construction/www/npapi-xine/stage/usr/local/lib/browser_plugins/symlinks/opera/ /bin/mkdir -p /construction/www/npapi-xine/stage/usr/local/lib/browser_plugins/symlinks/opera-devel ln -sf /usr/local/lib/browser_plugins//xineplugin.so /construction/www/npapi-xine/stage/usr/local/lib/browser_plugins/symlinks/opera-devel/ /bin/mkdir -p /construction/www/npapi-xine/stage/usr/local/lib/browser_plugins/symlinks/webkit-gtk2 ln -sf /usr/local/lib/browser_plugins//xineplugin.so /construction/www/npapi-xine/stage/usr/local/lib/browser_plugins/symlinks/webkit-gtk2/ ====> Compressing man pages (compress-man) -------------------------------------------------------------------------------- -- Phase: package -------------------------------------------------------------------------------- ===> Building package for npapi-xine-1.0.2_11 file sizes/checksums [5]: . done packing files [5]: . done packing directories [0]: . done -------------------------------------------------- -- Termination -------------------------------------------------- Finished: Saturday, 21 JUL 2018 at 01:40:08 UTC Duration: 00:02:26