=> Building security/axTLS Started : Thursday, 12 APR 2018 at 05:25:26 UTC Platform: 5.3-DEVELOPMENT DragonFly v5.3.0.81.g32506c-DEVELOPMENT #29: Tue Apr 10 08:49:52 PDT 2018 marino@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 -------------------------------------------------- -- Environment -------------------------------------------------- UNAME_r=5.2-SYNTH UNAME_m=x86_64 UNAME_p=x86_64 UNAME_v=DragonFly 5.2-SYNTH UNAME_s=DragonFly PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SSL_NO_VERIFY_PEER=1 TERM=dumb PKG_CACHEDIR=/var/cache/pkg8 PKG_DBDIR=/var/db/pkg8 PORTSDIR=/xports LANG=C HOME=/root USER=root -------------------------------------------------- -- Options -------------------------------------------------- ===> The following configuration options are available for axTLS-1.4.9_2: COMPAT_OPENSSL=off: OpenSSL compatible API HTTPD=off: httpd output streaming support TLSWRAP=off: Build TLS wrapper like sslwrap X509=off: Generate X.509 Certificate PERL=off: Perl bindings or support DOCS=on: Build and/or install documentation (require doxygen) DEBUG=off: Build with debugging support TEST=off: Build test suite when available ====> SSL Library mode: you have to select exactly one of them SERVER_ONLY=off: Server only (no verification) CERT_VERIFICATION=off: Server only (with verification) ENABLE_CLIENT=off: Client/Server enabled FULL_MODE=on: Client/Server enabled with diagnostics SKELETON_MODE=off: The smallest library with least performance (experimental) ====> Protocol Preference: you have to select exactly one of them PROT_LOW=off: Use the fastest cipher(s) but at the expense of security PROT_MEDIUM=on: Balance between speed and security PROT_HIGH=off: Use the strongest cipher(s) at the cost of speed ===> Use 'make config' to modify these settings -------------------------------------------------- -- CONFIGURE_ENV -------------------------------------------------- MAKE=gmake XDG_DATA_HOME=/construction/security/axTLS XDG_CONFIG_HOME=/construction/security/axTLS HOME=/construction/security/axTLS TMPDIR="/tmp" PATH=/construction/security/axTLS/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 -------------------------------------------------- -- CONFIGURE_ARGS -------------------------------------------------- -------------------------------------------------- -- MAKE_ENV -------------------------------------------------- XDG_DATA_HOME=/construction/security/axTLS XDG_CONFIG_HOME=/construction/security/axTLS HOME=/construction/security/axTLS TMPDIR="/tmp" PATH=/construction/security/axTLS/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" -------------------------------------------------- -- MAKE_ARGS -------------------------------------------------- DESTDIR=/construction/security/axTLS/stage -------------------------------------------------- -- PLIST_SUB -------------------------------------------------- PORTDOCS="" PORTEXAMPLES="" COMPAT_OPENSSL="@comment " NO_COMPAT_OPENSSL="" HTTPD="@comment " NO_HTTPD="" TLSWRAP="@comment " NO_TLSWRAP="" X509="@comment " NO_X509="" PERL="@comment " NO_PERL="" DOCS="" NO_DOCS="@comment " DEBUG="@comment " NO_DEBUG="" TEST="@comment " NO_TEST="" SERVER_ONLY="@comment " NO_SERVER_ONLY="" CERT_VERIFICATION="@comment " NO_CERT_VERIFICATION="" ENABLE_CLIENT="@comment " NO_ENABLE_CLIENT="" FULL_MODE="" NO_FULL_MODE="@comment " SKELETON_MODE="@comment " NO_SKELETON_MODE="" PROT_LOW="@comment " NO_PROT_LOW="" PROT_MEDIUM="" NO_PROT_MEDIUM="@comment " PROT_HIGH="@comment " NO_PROT_HIGH="" OSREL=5.2 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/axTLS" EXAMPLESDIR="share/examples/axTLS" DATADIR="share/axTLS" WWWDIR="www/axTLS" ETCDIR="etc/axTLS" -------------------------------------------------- -- SUB_LIST -------------------------------------------------- COMPAT_OPENSSL="@comment " NO_COMPAT_OPENSSL="" HTTPD="@comment " NO_HTTPD="" TLSWRAP="@comment " NO_TLSWRAP="" X509="@comment " NO_X509="" PERL="@comment " NO_PERL="" DOCS="" NO_DOCS="@comment " DEBUG="@comment " NO_DEBUG="" TEST="@comment " NO_TEST="" SERVER_ONLY="@comment " NO_SERVER_ONLY="" CERT_VERIFICATION="@comment " NO_CERT_VERIFICATION="" ENABLE_CLIENT="@comment " NO_ENABLE_CLIENT="" FULL_MODE="" NO_FULL_MODE="@comment " SKELETON_MODE="@comment " NO_SKELETON_MODE="" PROT_LOW="@comment " NO_PROT_LOW="" PROT_MEDIUM="" NO_PROT_MEDIUM="@comment " PROT_HIGH="@comment " NO_PROT_HIGH="" PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/axTLS DOCSDIR=/usr/local/share/doc/axTLS EXAMPLESDIR=/usr/local/share/examples/axTLS WWWDIR=/usr/local/www/axTLS ETCDIR=/usr/local/etc/axTLS -------------------------------------------------- -- /etc/make.conf -------------------------------------------------- SYNTHPROFILE=Release-5.2 USE_PACKAGE_DEPENDS_ONLY=yes PACKAGE_BUILDING=yes BATCH=yes PKG_CREATE_VERBOSE=yes PORTSDIR=/xports DISTDIR=/distfiles WRKDIRPREFIX=/construction PORT_DBDIR=/options PACKAGES=/packages MAKE_JOBS_NUMBER_LIMIT=5 LICENSES_ACCEPTED= NONE HAVE_COMPAT_IA32_KERN= CONFIGURE_MAX_CMD_LEN=262144 _SMP_CPUS=8 UID=0 ARCH=x86_64 OPSYS=DragonFly DFLYVERSION=500200 OSVERSION=9999999 OSREL=5.2 _OSRELEASE=5.2-SYNTH -------------------------------------------------------------------------------- -- Phase: check-sanity -------------------------------------------------------------------------------- ===> License BSD3CLAUSE accepted by the user -------------------------------------------------------------------------------- -- Phase: pkg-depends -------------------------------------------------------------------------------- ===> axTLS-1.4.9_2 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.10.5.txz Installing pkg-1.10.5... Extracting pkg-1.10.5: .......... done ===> axTLS-1.4.9_2 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of axTLS-1.4.9_2 -------------------------------------------------------------------------------- -- Phase: fetch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: fetch -------------------------------------------------------------------------------- ===> License BSD3CLAUSE accepted by the user ===> Fetching all distfiles required by axTLS-1.4.9_2 for building -------------------------------------------------------------------------------- -- Phase: checksum -------------------------------------------------------------------------------- ===> License BSD3CLAUSE accepted by the user ===> Fetching all distfiles required by axTLS-1.4.9_2 for building => SHA256 Checksum OK for axTLS-1.4.9.tar.gz. -------------------------------------------------------------------------------- -- Phase: extract-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: extract -------------------------------------------------------------------------------- ===> License BSD3CLAUSE accepted by the user ===> Fetching all distfiles required by axTLS-1.4.9_2 for building ===> Extracting for axTLS-1.4.9_2 => SHA256 Checksum OK for axTLS-1.4.9.tar.gz. -------------------------------------------------------------------------------- -- Phase: patch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: patch -------------------------------------------------------------------------------- ===> Patching for axTLS-1.4.9_2 ===> Applying ports patches for axTLS-1.4.9_2 /usr/bin/sed -i.bak -e '/^CC/s|gcc|cc|; /^HOSTCC/s|gcc|cc|' /construction/security/axTLS/axTLS/config/Rules.mak -------------------------------------------------------------------------------- -- Phase: build-depends -------------------------------------------------------------------------------- ===> axTLS-1.4.9_2 depends on executable: doxygen - not found ===> Installing existing package /packages/All/doxygen-1.8.14,2.txz Installing doxygen-1.8.14,2... `-- Installing graphviz-2.40.1_4... | `-- Installing cairo-1.14.8_1,2... | | `-- Installing dri2proto-2.8... | | `-- Extracting dri2proto-2.8: .... done | | `-- Installing fontconfig-2.12.1_3,1... | | `-- Installing expat-2.2.5... | | `-- Extracting expat-2.2.5: .......... done | | `-- Installing freetype2-2.9_1... | | `-- Extracting freetype2-2.9_1: .......... done | | `-- Extracting fontconfig-2.12.1_3,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | | `-- Installing gettext-runtime-0.19.8.1_1... | | `-- Installing indexinfo-0.3.1... | | `-- Extracting indexinfo-0.3.1: .... done | | `-- Extracting gettext-runtime-0.19.8.1_1: .......... done | | `-- Installing glib-2.50.3_1,1... | | `-- Installing libffi-3.2.1_2... | | `-- Extracting libffi-3.2.1_2: .......... done | | `-- Installing libiconv-1.14_11... | | `-- Extracting libiconv-1.14_11: .......... done | | `-- Installing pcre-8.40_1... | | `-- Extracting pcre-8.40_1: .......... done | | `-- Installing perl5-5.26.1... | | `-- Extracting perl5-5.26.1: .......... done | | `-- Installing python27-2.7.14_1... | | | `-- Installing libressl-2.6.4... | | | `-- Extracting libressl-2.6.4: .......... done | | | `-- Installing ncurses-6.0.0s20171223_1... | | | `-- Extracting ncurses-6.0.0s20171223_1: .......... done | | | `-- Installing readline-7.0.3_1... | | | `-- Extracting readline-7.0.3_1: .......... done | | `-- Extracting python27-2.7.14_1: .......... done | | `-- Extracting glib-2.50.3_1,1: .......... done No schema files found: doing nothing. | | `-- Installing glproto-1.4.17... | | `-- Extracting glproto-1.4.17: ...... done | | `-- Installing libX11-1.6.5,1... | | `-- Installing kbproto-1.0.7... | | `-- Extracting kbproto-1.0.7: .......... done | | `-- Installing libXau-1.0.8_3... | | | `-- Installing xproto-7.0.31... | | | `-- Extracting xproto-7.0.31: .......... done | | `-- Extracting libXau-1.0.8_3: .......... done | | `-- Installing libXdmcp-1.1.2... | | `-- Extracting libXdmcp-1.1.2: ......... done | | `-- Installing libxcb-1.12_2... | | | `-- Installing libpthread-stubs-0.4... | | | `-- Extracting libpthread-stubs-0.4: .... done | | | `-- Installing libxml2-2.9.7... | | | `-- Extracting libxml2-2.9.7: .......... done | | `-- Extracting libxcb-1.12_2: .......... done | | `-- Extracting libX11-1.6.5,1: .......... done | | `-- Installing libXext-1.3.3_1,1... | | `-- Installing xextproto-7.3.0... | | `-- Extracting xextproto-7.3.0: .......... done | | `-- Extracting libXext-1.3.3_1,1: .......... done | | `-- Installing libXrender-0.9.10... | | `-- Installing renderproto-0.11.1... | | `-- Extracting renderproto-0.11.1: .... done | | `-- Extracting libXrender-0.9.10: .......... done | | `-- Installing mesa-libs-17.3.1... | | `-- Installing libXdamage-1.1.4_3... | | | `-- Installing damageproto-1.2.1... | | | `-- Extracting damageproto-1.2.1: .... done | | | `-- Installing libXfixes-5.0.3... | | | `-- Installing fixesproto-5.0... | | | `-- Extracting fixesproto-5.0: .... done | | | `-- Extracting libXfixes-5.0.3: .......... done | | `-- Extracting libXdamage-1.1.4_3: ...... done | | `-- Installing libXxf86vm-1.1.4_1... | | | `-- Installing xf86vidmodeproto-2.3.1... | | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | | `-- Installing libdrm-2.4.89,1... | | | `-- Installing libpciaccess-0.13.5... | | | `-- Installing pciids-20180219... | | | `-- Extracting pciids-20180219: ..... done | | | `-- Extracting libpciaccess-0.13.5: ...... done | | `-- Extracting libdrm-2.4.89,1: .......... done | | `-- Installing libelf-0.8.13_3... | | `-- Extracting libelf-0.8.13_3: .......... done | | `-- Installing libxshmfence-1.2_2... | | `-- Extracting libxshmfence-1.2_2: ......... done | | `-- Extracting mesa-libs-17.3.1: .......... done | | `-- Installing pixman-0.34.0... | | `-- Extracting pixman-0.34.0: .......... done | | `-- Installing png-1.6.34... | | `-- Extracting png-1.6.34: .......... done | | `-- Installing xcb-util-renderutil-0.3.9_1... | | `-- Installing xcb-util-0.4.0_2,1... | | `-- Extracting xcb-util-0.4.0_2,1: .......... done | | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done | `-- Extracting cairo-1.14.8_1,2: .......... done | `-- Installing jpeg-turbo-1.5.3... | `-- Extracting jpeg-turbo-1.5.3: .......... done | `-- Installing libICE-1.0.9_1,1... | `-- Extracting libICE-1.0.9_1,1: .......... done | `-- Installing libSM-1.2.2_3,1... | `-- Extracting libSM-1.2.2_3,1: .......... done | `-- Installing libXaw-1.0.13,2... | | `-- Installing libXmu-1.1.2_3,1... | | `-- Installing libXt-1.1.5,1... | | `-- Extracting libXt-1.1.5,1: .......... done | | `-- Extracting libXmu-1.1.2_3,1: .......... done | | `-- Installing libXp-1.0.3,1... | | `-- Installing printproto-1.0.5... | | `-- Extracting printproto-1.0.5: .... done | | `-- Extracting libXp-1.0.3,1: .......... done | | `-- Installing libXpm-3.5.12... | | `-- Extracting libXpm-3.5.12: .......... done | `-- Extracting libXaw-1.0.13,2: .......... done | `-- Installing libgd-2.2.4_1,1... | | `-- Installing tiff-4.0.9_1... | | `-- Installing jbigkit-2.1_1... | | `-- Extracting jbigkit-2.1_1: .......... done | | `-- Extracting tiff-4.0.9_1: .......... done | | `-- Installing webp-0.6.1... | | `-- Installing giflib-5.1.4... | | `-- Extracting giflib-5.1.4: .......... done | | `-- Extracting webp-0.6.1: .......... done | `-- Extracting libgd-2.2.4_1,1: .......... done | `-- Installing libltdl-2.4.6... | `-- Extracting libltdl-2.4.6: .......... done | `-- Installing pango-1.42.0... | | `-- Installing encodings-1.0.4_4,1... | | `-- Installing font-util-1.3.1... | | `-- Extracting font-util-1.3.1: .......... done | | `-- Extracting encodings-1.0.4_4,1: .......... done | | `-- Installing fribidi-0.19.7... | | `-- Extracting fribidi-0.19.7: .......... done | | `-- Installing harfbuzz-1.7.6... | | `-- Installing graphite2-1.3.11... | | `-- Extracting graphite2-1.3.11: .......... done | | `-- Extracting harfbuzz-1.7.6: .......... done | | `-- Installing libXft-2.3.2_1... | | `-- Extracting libXft-2.3.2_1: .......... done | | `-- Installing xorg-fonts-truetype-7.7_1... | | `-- Installing dejavu-2.37... | | | `-- Installing mkfontdir-1.0.7... | | | `-- Installing mkfontscale-1.1.2... | | | | `-- Installing libfontenc-1.1.3_1... | | | | `-- Extracting libfontenc-1.1.3_1: ......... done | | | `-- Extracting mkfontscale-1.1.2: .. done | | | `-- Extracting mkfontdir-1.0.7: .. done | | `-- Extracting dejavu-2.37: .......... done | | `-- Installing font-bh-ttf-1.0.3_3... | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | `-- Installing font-misc-ethiopic-1.0.3_3... | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | `-- Installing font-misc-meltho-1.0.3_3... | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done | `-- Extracting pango-1.42.0: .......... done `-- Extracting graphviz-2.40.1_4: .......... done `-- Installing tex-dvipsk-5.995_1... | `-- Installing libpaper-1.1.24.4... | `-- Extracting libpaper-1.1.24.4: .......... done | `-- Installing tex-kpathsea-6.2.1_1... | `-- Extracting tex-kpathsea-6.2.1_1: .......... done | `-- Installing tex-web2c-20150521_1... | | `-- Installing mpfr-3.1.6... | | `-- Installing gmp-6.1.2... | | `-- Extracting gmp-6.1.2: .......... done | | `-- Extracting mpfr-3.1.6: .......... done | | `-- Installing openjpeg15-1.5.2_1... | | `-- Installing lcms2-2.9... | | `-- Extracting lcms2-2.9: .......... done | | `-- Extracting openjpeg15-1.5.2_1: .......... done | | `-- Installing tex-ptexenc-1.3.3_2... | | `-- Extracting tex-ptexenc-1.3.3_2: .......... done | | `-- Installing zziplib-0.13.62_2... | | `-- Extracting zziplib-0.13.62_2: .......... done | `-- Extracting tex-web2c-20150521_1: .......... done | `-- Installing texlive-texmf-20150523_4... | | `-- Installing texlive-base-20150521_25... | | `-- Installing ghostscript9-agpl-base-9.16_5... | | | `-- Installing cups-2.2.6... | | | `-- Installing avahi-app-0.6.31_6... | | | | `-- Installing dbus-glib-0.108... | | | | `-- Installing dbus-1.10.16_1... ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | | | | `-- Extracting dbus-1.10.16_1: ......... done | | | | `-- Extracting dbus-glib-0.108: .......... done | | | | `-- Installing gdbm-1.13_1... | | | | `-- Extracting gdbm-1.13_1: .......... done | | | | `-- Installing gnome_subr-1.0... | | | | `-- Extracting gnome_subr-1.0: .... done | | | | `-- Installing gobject-introspection-1.50.0_1,1... | | | | `-- Extracting gobject-introspection-1.50.0_1,1: .......... done | | | | `-- Installing libdaemon-0.14_1... | | | | `-- Extracting libdaemon-0.14_1: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. | | | `-- Extracting avahi-app-0.6.31_6: .......... done | | | `-- Installing gnutls-3.5.18... | | | | `-- Installing ca_root_nss-3.36... | | | | `-- Extracting ca_root_nss-3.36: ........ done | | | | `-- Installing libidn2-2.0.4... | | | | `-- Installing libunistring-0.9.9... | | | | `-- Extracting libunistring-0.9.9: .......... done | | | | `-- Extracting libidn2-2.0.4: .......... done | | | | `-- Installing libtasn1-4.13... | | | | `-- Extracting libtasn1-4.13: .......... done | | | | `-- Installing nettle-3.4... | | | | `-- Extracting nettle-3.4: .......... done | | | | `-- Installing p11-kit-0.23.10... | | | | `-- Extracting p11-kit-0.23.10: .......... done | | | | `-- Installing trousers-0.3.14_2... | | | | `-- Installing tpm-emulator-0.7.4_2... ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | | | `-- Extracting tpm-emulator-0.7.4_2: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | | | `-- Extracting trousers-0.3.14_2: .......... done | | | `-- Extracting gnutls-3.5.18: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. | | | `-- Extracting cups-2.2.6: .......... done | | | `-- Installing gsfonts-8.11_8... | | | `-- Extracting gsfonts-8.11_8: .......... done | | | `-- Installing jbig2dec-0.14... | | | `-- Extracting jbig2dec-0.14: .......... done | | | `-- Installing libidn-1.33_1... | | | `-- Extracting libidn-1.33_1: .......... done | | `-- Extracting ghostscript9-agpl-base-9.16_5: .......... done | | `-- Installing harfbuzz-icu-1.7.6... | | | `-- Installing icu-60.2_2,1... | | | `-- Extracting icu-60.2_2,1: .......... done | | `-- Extracting harfbuzz-icu-1.7.6: ..... done | | `-- Installing libpotrace-1.12... | | `-- Extracting libpotrace-1.12: ........ done | | `-- Installing poppler-0.57.0... | | | `-- Installing nspr-4.19... | | | `-- Extracting nspr-4.19: .......... done | | | `-- Installing nss-3.36... | | | `-- Installing sqlite3-3.22.0_1... | | | `-- Extracting sqlite3-3.22.0_1: .......... done | | | `-- Extracting nss-3.36: .......... done | | | `-- Installing openjpeg-2.3.0... | | | `-- Extracting openjpeg-2.3.0: .......... done | | | `-- Installing poppler-data-0.4.8... | | | `-- Extracting poppler-data-0.4.8: .......... done | | `-- Extracting poppler-0.57.0: .......... done | | `-- Installing psutils-1.17_5... | | `-- Extracting psutils-1.17_5: .......... done | | `-- Installing t1lib-5.1.2_4,1... | | `-- Extracting t1lib-5.1.2_4,1: .......... done | | `-- Installing teckit-2.5.7... | | `-- Extracting teckit-2.5.7: .......... done | | `-- Installing texlive-tlmgr-20150523_2... | | `-- Extracting texlive-tlmgr-20150523_2: ......... done | | `-- Installing xpdfopen-0.86... | | `-- Extracting xpdfopen-0.86: .... done | | `-- Extracting texlive-base-20150521_25: .......... done mktexlsr: Updating /usr/local/share/texmf/ls-R... mktexlsr: Updating /usr/local/share/texmf-config/ls-R... mktexlsr: Updating /usr/local/share/texmf-dist/ls-R... mktexlsr: Updating /usr/local/share/texmf-local/ls-R... mktexlsr: Updating /usr/local/share/texmf-var/ls-R... mktexlsr: Done. | `-- Extracting texlive-texmf-20150523_4: .......... done mktexlsr: Updating /usr/local/share/texmf/ls-R... mktexlsr: Done. mktexlsr: Updating /usr/local/share/texmf-dist/ls-R... mktexlsr: Done. `-- Extracting tex-dvipsk-5.995_1: .......... done mktexlsr: Updating /usr/local/share/texmf-dist/ls-R... mktexlsr: Done. `-- Installing tex-formats-20150521_2... | `-- Installing tex-basic-engines-20150521... | `-- Extracting tex-basic-engines-20150521: .......... done `-- Extracting tex-formats-20150521_2: .......... done mktexlsr: Updating /usr/local/share/texmf-var/ls-R... mktexlsr: Done. Extracting doxygen-1.8.14,2: .......... done Message from freetype2-2.9_1: The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/ft2-toc.html, if documentation was installed). Message from perl5-5.26.1: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Message from python27-2.7.14_1: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== Message from dejavu-2.37: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from zziplib-0.13.62_2: ===> NOTICE: The zziplib port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from ca_root_nss-3.36: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.14_2: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Message from ghostscript9-agpl-base-9.16_5: Note: in order to use the script "dvipdf", dvips must be installed. This program is provided by another package print/tex-dvipsk. FAPIfontmap and FAPIcidfmap in /usr/local/share/ghostscript/9.16/Resource/Init have to be configured if you want to use FAPI feature. ===> axTLS-1.4.9_2 depends on executable: doxygen - found ===> Returning to build of axTLS-1.4.9_2 ===> axTLS-1.4.9_2 depends on executable: gmake - not found ===> Installing existing package /packages/All/gmake-4.2.1_2.txz Installing gmake-4.2.1_2... Extracting gmake-4.2.1_2: .......... done ===> axTLS-1.4.9_2 depends on executable: gmake - found ===> Returning to build of axTLS-1.4.9_2 -------------------------------------------------------------------------------- -- Phase: lib-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: configure -------------------------------------------------------------------------------- ===> Configuring for axTLS-1.4.9_2 /usr/bin/env XDG_DATA_HOME=/construction/security/axTLS XDG_CONFIG_HOME=/construction/security/axTLS HOME=/construction/security/axTLS TMPDIR="/tmp" PATH=/construction/security/axTLS/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" gmake -f Makefile -j5 -C /construction/security/axTLS/axTLS oldconfig gmake[1]: Entering directory '/construction/security/axTLS/axTLS' gmake -C config/scripts/config conf gmake[2]: Entering directory '/construction/security/axTLS/axTLS/config/scripts/config' cp ../../scripts/config/zconf.tab.h_shipped zconf.tab.h cp ../../scripts/config/zconf.tab.c_shipped zconf.tab.c cp ../../scripts/config/lex.zconf.c_shipped lex.zconf.c cc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -I/usr/local/include/ncurses -DCURSES_LOC="" -I. -c ../../scripts/config/conf.c -o conf.o cc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -I/usr/local/include/ncurses -DCURSES_LOC="" -I../../scripts/config -I. -c zconf.tab.c -o zconf.tab.o ../../scripts/config/conf.c: In function 'conf_string': ../../scripts/config/conf.c:164:20: warning: variable 'help' set but not used [-Wunused-but-set-variable] const char *def, *help; ^ ../../scripts/config/conf.c: In function 'conf_sym': ../../scripts/config/conf.c:198:6: warning: variable 'type' set but not used [-Wunused-but-set-variable] int type; ^ ../../scripts/config/conf.c: In function 'conf_choice': ../../scripts/config/conf.c:273:6: warning: variable 'type' set but not used [-Wunused-but-set-variable] int type; ^ In file included from zconf.tab.c:2123:0: lex.zconf.c:2969:16: warning: 'input' defined but not used [-Wunused-function] static int input (void) ^ cc conf.o zconf.tab.o -o conf gmake[2]: Leaving directory '/construction/security/axTLS/axTLS/config/scripts/config' # # using defaults found in config/.config # * * axTLS Configuration * Platform > 1. Linux (CONFIG_PLATFORM_LINUX) 2. Cygwin (CONFIG_PLATFORM_CYGWIN) 3. Win32 (CONFIG_PLATFORM_WIN32) choice[1-3]: 1 * * General Configuration * axTLS installation prefix (PREFIX) [/usr/local] /usr/local Build axTLS with Debugging symbols (CONFIG_DEBUG) [N/y/?] n Strip unwanted sections from elf binaries (CONFIG_STRIP_UNWANTED_SECTIONS) [N/y/?] n Any extra CFLAGS options for the compiler? (CONFIG_EXTRA_CFLAGS_OPTIONS) [] Any extra LDFLAGS options for the compiler? (CONFIG_EXTRA_LDFLAGS_OPTIONS) [] * * SSL Library * Mode 1. Server only - no verification (CONFIG_SSL_SERVER_ONLY) 2. Server only - with verification (CONFIG_SSL_CERT_VERIFICATION) 3. Client/Server enabled (CONFIG_SSL_ENABLE_CLIENT) > 4. Client/Server enabled with diagnostics (CONFIG_SSL_FULL_MODE) 5. Skeleton mode - the smallest server mode (CONFIG_SSL_SKELETON_MODE) choice[1-5]: 4 Protocol Preference 1. Low (CONFIG_SSL_PROT_LOW) > 2. Medium (CONFIG_SSL_PROT_MEDIUM) 3. High (CONFIG_SSL_PROT_HIGH) choice[1-3]: 2 Enable default key (CONFIG_SSL_USE_DEFAULT_KEY) [Y/n/?] y Generate X.509 Certificate (CONFIG_SSL_GENERATE_X509_CERT) [N/y/?] n Enable v23 Handshake (CONFIG_SSL_ENABLE_V23_HANDSHAKE) [N/y/?] n Enable PEM (CONFIG_SSL_HAS_PEM) [Y/n/?] y Use PKCS8/PKCS12 (CONFIG_SSL_USE_PKCS12) [Y/n/?] y Session expiry time (in hours) (CONFIG_SSL_EXPIRY_TIME) [24] 24 Maximum number of certificate authorites (CONFIG_X509_MAX_CA_CERTS) [150] 150 Maximum number of chained certificates (CONFIG_SSL_MAX_CERTS) [3] 3 Enable SSL_CTX mutexing (CONFIG_SSL_CTX_MUTEXING) [N/y/?] n Use /dev/urandom (CONFIG_USE_DEV_URANDOM) [Y/n/?] y Enable openssl API compatibility (CONFIG_OPENSSL_COMPATIBLE) [N/y/?] n Build the bigint performance test tool (CONFIG_PERFORMANCE_TESTING) [N/y/?] n Build the SSL testing tool (CONFIG_SSL_TEST) [N/y/?] n Enable axtlswrap (CONFIG_AXTLSWRAP) [N/y/?] n Enable HTTP/HTTPS Web Server (CONFIG_AXHTTPD) [N/y/?] n * * Language Bindings * Create language bindings (CONFIG_BINDINGS) [Y/n/?] y Create C# bindings (CONFIG_CSHARP_BINDINGS) [N/y/?] n Create VB.NET bindings (CONFIG_VBNET_BINDINGS) [N/y/?] n Create Java bindings (CONFIG_JAVA_BINDINGS) [N/y/?] n Create Perl bindings (CONFIG_PERL_BINDINGS) [N/y/?] n Create Lua bindings (CONFIG_LUA_BINDINGS) [N/y/?] n * * Samples * Create Samples (CONFIG_SAMPLES) [Y/n/?] y axssl - C version (CONFIG_C_SAMPLES) [Y/n/?] y * * BigInt Options * Reduction Algorithm 1. Classical (CONFIG_BIGINT_CLASSICAL) 2. Montgomery (CONFIG_BIGINT_MONTGOMERY) > 3. Barrett (CONFIG_BIGINT_BARRETT) choice[1-3]: 3 Chinese Remainder Theorem (CRT) (CONFIG_BIGINT_CRT) [Y/n/?] y Karatsuba Multiplication (CONFIG_BIGINT_KARATSUBA) [N/y/?] n Sliding Window Exponentiation (CONFIG_BIGINT_SLIDING_WINDOW) [Y/n/?] y Square Algorithm (CONFIG_BIGINT_SQUARE) [Y/n/?] y BigInt Integrity Checking (CONFIG_BIGINT_CHECK_ON) [N/y/?] n Integer Size > 1. 32 (CONFIG_INTEGER_32BIT) 2. 16 (CONFIG_INTEGER_16BIT) 3. 8 (CONFIG_INTEGER_8BIT) choice[1-3]: 1 gmake[1]: Leaving directory '/construction/security/axTLS/axTLS' -------------------------------------------------------------------------------- -- Phase: build -------------------------------------------------------------------------------- ===> Building for axTLS-1.4.9_2 gmake[1]: Entering directory '/construction/security/axTLS/axTLS' gmake -C crypto gmake[2]: Entering directory '/construction/security/axTLS/axTLS/crypto' cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o aes.o aes.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o bigint.o bigint.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o crypto_misc.o crypto_misc.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o hmac.o hmac.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o md2.o md2.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o md5.o md5.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o rc4.o rc4.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o rsa.o rsa.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o sha1.o sha1.c gmake[2]: Leaving directory '/construction/security/axTLS/axTLS/crypto' gmake -C ssl gmake[2]: Entering directory '/construction/security/axTLS/axTLS/ssl' cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o asn1.o asn1.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o gen_cert.o gen_cert.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o loader.o loader.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o openssl.o openssl.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o os_port.o os_port.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o p12.o p12.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o tls1.o tls1.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o tls1_svr.o tls1_svr.c tls1_svr.c: In function 'process_client_hello': tls1_svr.c:120:14: warning: unused variable 'record_buf' [-Wunused-variable] uint8_t *record_buf = ssl->hmac_header; ^ cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o tls1_clnt.o tls1_clnt.c cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../config -I../ssl -I../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o x509.o x509.c ar -r .././_stage/libaxtls.a ../crypto/aes.o ../crypto/bigint.o ../crypto/crypto_misc.o ../crypto/hmac.o ../crypto/md2.o ../crypto/md5.o ../crypto/rc4.o ../crypto/rsa.o ../crypto/sha1.o asn1.o gen_cert.o loader.o openssl.o os_port.o p12.o tls1.o tls1_svr.o tls1_clnt.o x509.o cc -s -s -shared -Wl,-soname,libaxtls.so.1 -o .././_stage/libaxtls.so.1.2 ../crypto/aes.o ../crypto/bigint.o ../crypto/crypto_misc.o ../crypto/hmac.o ../crypto/md2.o ../crypto/md5.o ../crypto/rc4.o ../crypto/rsa.o ../crypto/sha1.o asn1.o gen_cert.o loader.o openssl.o os_port.o p12.o tls1.o tls1_svr.o tls1_clnt.o x509.o /usr/libexec/binutils227/elf/ar: creating .././_stage/libaxtls.a cd .././_stage; ln -sf libaxtls.so.1.2 libaxtls.so.1; ln -sf libaxtls.so.1 libaxtls.so; cd - gmake[2]: Leaving directory '/construction/security/axTLS/axTLS/ssl' gmake -C bindings gmake[2]: Entering directory '/construction/security/axTLS/axTLS/bindings' gmake[2]: Nothing to be done for 'all'. gmake[2]: Leaving directory '/construction/security/axTLS/axTLS/bindings' gmake -C samples gmake[2]: Entering directory '/construction/security/axTLS/axTLS/samples' gmake -C c gmake[3]: Entering directory '/construction/security/axTLS/axTLS/samples/c' cc -pipe -O2 -fno-strict-aliasing -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I/config -I/ssl -I/crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -I../../config -I../../ssl -I../../crypto -Wall -Wstrict-prototypes -Wshadow -fPIC -O3 -c -o axssl.o axssl.c cc -s -s -s -o ../.././_stage/axssl axssl.o -L../.././_stage -laxtls gmake[3]: Leaving directory '/construction/security/axTLS/axTLS/samples/c' gmake[2]: Leaving directory '/construction/security/axTLS/axTLS/samples' gmake[1]: Leaving directory '/construction/security/axTLS/axTLS' /usr/bin/env XDG_DATA_HOME=/construction/security/axTLS XDG_CONFIG_HOME=/construction/security/axTLS HOME=/construction/security/axTLS TMPDIR="/tmp" PATH=/construction/security/axTLS/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" gmake -f Makefile -j5 -C /construction/security/axTLS/axTLS docs gmake[1]: Entering directory '/construction/security/axTLS/axTLS' gmake -C docsrc doco gmake[2]: Entering directory '/construction/security/axTLS/axTLS/docsrc' doxygen ./axTLS.dox warning: Tag `DETAILS_AT_TOP' at line 163 of file `./axTLS.dox' has become obsolete. To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u" warning: Tag `SHOW_DIRECTORIES' at line 444 of file `./axTLS.dox' has become obsolete. To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u" warning: Tag `HTML_ALIGN_MEMBERS' at line 753 of file `./axTLS.dox' has become obsolete. To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u" warning: Tag `XML_SCHEMA' at line 1018 of file `./axTLS.dox' has become obsolete. To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u" warning: Tag `XML_DTD' at line 1024 of file `./axTLS.dox' has become obsolete. To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u" Searching for include files... Searching for example files... Searching for images... Searching for files in directory /construction/security/axTLS/axTLS/docsrc/images Searching for dot files... Searching for msc files... Searching for dia files... Searching for files to exclude Searching INPUT for files to process... Reading and parsing tag files Parsing files Preprocessing /construction/security/axTLS/axTLS/bindings/csharp/axTLS.cs... Parsing file /construction/security/axTLS/axTLS/bindings/csharp/axTLS.cs... Reading /construction/security/axTLS/axTLS/bindings/java/SSL.java... Parsing file /construction/security/axTLS/axTLS/bindings/java/SSL.java... Reading /construction/security/axTLS/axTLS/bindings/java/SSLUtil.java... Parsing file /construction/security/axTLS/axTLS/bindings/java/SSLUtil.java... Reading /construction/security/axTLS/axTLS/bindings/java/SSLCTX.java... Parsing file /construction/security/axTLS/axTLS/bindings/java/SSLCTX.java... Reading /construction/security/axTLS/axTLS/bindings/java/SSLServer.java... Parsing file /construction/security/axTLS/axTLS/bindings/java/SSLServer.java... Reading /construction/security/axTLS/axTLS/bindings/java/SSLClient.java... Parsing file /construction/security/axTLS/axTLS/bindings/java/SSLClient.java... Reading /construction/security/axTLS/axTLS/bindings/java/SSLReadHolder.java... Parsing file /construction/security/axTLS/axTLS/bindings/java/SSLReadHolder.java... Preprocessing /construction/security/axTLS/axTLS/ssl/ssl.h... Parsing file /construction/security/axTLS/axTLS/ssl/ssl.h... Preprocessing /construction/security/axTLS/axTLS/crypto/bigint.c... Parsing file /construction/security/axTLS/axTLS/crypto/bigint.c... Preprocessing /construction/security/axTLS/axTLS/crypto/bigint.h... Parsing file /construction/security/axTLS/axTLS/crypto/bigint.h... Building group list... Building directory list... Building namespace list... Building file list... Building class list... Associating documentation with classes... Computing nesting relations for classes... Building example list... Searching for enumerations... Searching for documented typedefs... Searching for members imported via using declarations... Searching for included using directives... Searching for documented variables... Building interface member list... Building member list... Searching for friends... Searching for documented defines... Computing class inheritance relations... Computing class usage relations... Flushing cached template relations that have become invalid... Computing class relations... Add enum values to enums... Searching for member function documentation... Creating members for template instances... Building page list... Search for main page... Computing page relations... Determining the scope of groups... Sorting lists... Freeing entry tree Determining which enums are documented Computing member relations... Building full member lists recursively... Adding members to member groups. Computing member references... Inheriting documentation... Generating disk names... Adding source references... Adding xrefitems... Sorting member lists... Generating citations page... Counting data structures... Resolving user defined references... Finding anchors and sections in the documentation... Transferring function references... Combining using relations... Adding members to index pages... Generating style sheet... Generating search indices... Generating example documentation... Generating file sources... Parsing code for file axTLS.cs... Parsing code for file bigint.c... Parsing code for file bigint.h... Parsing code for file ssl.h... Parsing code for file SSL.java... Parsing code for file SSLClient.java... Parsing code for file SSLCTX.java... Parsing code for file SSLReadHolder.java... Parsing code for file SSLServer.java... Parsing code for file SSLUtil.java... Generating file documentation... Generating page documentation... Generating group documentation... Generating class documentation... Generating namespace index... Generating docs for namespace axTLS Generating docs for compound axTLS::SSL... Generating docs for compound axTLS::SSLClient... Generating docs for compound axTLS::SSLCTX... Generating docs for compound axTLS::SSLServer... Generating docs for compound axTLS::SSLUtil... Generating docs for compound axTLSj::SSL... Generating docs for compound axTLSj::SSLClient... Generating docs for compound axTLSj::SSLCTX... Generating docs for compound axTLSj::SSLReadHolder... Generating docs for compound axTLSj::SSLServer... Generating docs for compound axTLSj::SSLUtil... Generating graph info page... Generating directory documentation... Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... lookup cache used 180/65536 hits=554 misses=184 finished... gmake[2]: Leaving directory '/construction/security/axTLS/axTLS/docsrc' gmake[1]: Leaving directory '/construction/security/axTLS/axTLS' -------------------------------------------------------------------------------- -- Phase: run-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: stage -------------------------------------------------------------------------------- ===> Staging for axTLS-1.4.9_2 ===> Generating temporary packing list install -m 0644 /construction/security/axTLS/axTLS/_stage/libaxtls.a /construction/security/axTLS/stage/usr/local/lib install -s -m 0644 /construction/security/axTLS/axTLS/_stage/libaxtls.so.1.2 /construction/security/axTLS/stage/usr/local/lib ln -s libaxtls.so.1.2 /construction/security/axTLS/stage/usr/local/lib/libaxtls.so.1 ln -fs libaxtls.so.1 /construction/security/axTLS/stage/usr/local/lib/libaxtls.so install -s -m 555 /construction/security/axTLS/axTLS/_stage/axssl /construction/security/axTLS/stage/usr/local/bin install -m 0644 /construction/security/axTLS/axTLS/crypto/*.h /construction/security/axTLS/stage/usr/local/include/axTLS install -m 0644 /construction/security/axTLS/axTLS/ssl/*.h /construction/security/axTLS/stage/usr/local/include/axTLS /bin/rm -f /construction/security/axTLS/stage/usr/local/include/axTLS/cert.h /bin/rm -f /construction/security/axTLS/stage/usr/local/include/axTLS/private_key.h /bin/rm -f /construction/security/axTLS/stage/usr/local/include/axTLS/os_port.h install -m 0644 /construction/security/axTLS/axTLS/config/config.h /construction/security/axTLS/stage/usr/local/include/axTLS cd /construction/security/axTLS/axTLS/docsrc/html && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/security/axTLS/stage/usr/local/share/doc/axTLS ====> Compressing man pages (compress-man) -------------------------------------------------------------------------------- -- Phase: package -------------------------------------------------------------------------------- ===> Building package for axTLS-1.4.9_2 file sizes/checksums [93]: . done packing files [93]: . done packing directories [0]: . done -------------------------------------------------- -- Termination -------------------------------------------------- Finished: Thursday, 12 APR 2018 at 05:29:11 UTC Duration: 00:03:45