=> Building graphics/llpp Started : Saturday, 21 JUL 2018 at 12:31:42 UTC Platform: 5.3-DEVELOPMENT DragonFly v5.3.0.242.g757c0-DEVELOPMENT #30: Tue May 8 14:06:27 PDT 2018 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 -------------------------------------------------- -- Environment -------------------------------------------------- UNAME_r=5.2-SYNTH UNAME_m=x86_64 UNAME_p=x86_64 UNAME_v=DragonFly 5.2-SYNTH UNAME_s=DragonFly PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SSL_NO_VERIFY_PEER=1 TERM=dumb PKG_CACHEDIR=/var/cache/pkg8 PKG_DBDIR=/var/db/pkg8 PORTSDIR=/xports LANG=C HOME=/root USER=root -------------------------------------------------- -- Options -------------------------------------------------- -------------------------------------------------- -- CONFIGURE_ENV -------------------------------------------------- MAKE=gmake XDG_DATA_HOME=/construction/graphics/llpp XDG_CONFIG_HOME=/construction/graphics/llpp HOME=/construction/graphics/llpp TMPDIR="/tmp" PATH=/construction/graphics/llpp/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 -------------------------------------------------- -- CONFIGURE_ARGS -------------------------------------------------- -------------------------------------------------- -- MAKE_ENV -------------------------------------------------- OPENSSLBASE=/usr/local OPENSSLDIR=/usr/local/openssl OPENSSLINC=/usr/local/include OPENSSLLIB=/usr/local/lib OPENSSLRPATH=/usr/local/lib XDG_DATA_HOME=/construction/graphics/llpp XDG_CONFIG_HOME=/construction/graphics/llpp HOME=/construction/graphics/llpp TMPDIR="/tmp" PATH=/construction/graphics/llpp/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS=" -Wl,-rpath,/usr/local/lib" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -m 555" BSD_INSTALL_LIB="install -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" -------------------------------------------------- -- MAKE_ARGS -------------------------------------------------- DESTDIR=/construction/graphics/llpp/stage -------------------------------------------------- -- PLIST_SUB -------------------------------------------------- PORTDOCS="" PORTEXAMPLES="" OCAML_SITELIBDIR="lib/ocaml/site-lib" OSREL=5.2 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/llpp" EXAMPLESDIR="share/examples/llpp" DATADIR="share/llpp" WWWDIR="www/llpp" ETCDIR="etc/llpp" -------------------------------------------------- -- SUB_LIST -------------------------------------------------- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/llpp DOCSDIR=/usr/local/share/doc/llpp EXAMPLESDIR=/usr/local/share/examples/llpp WWWDIR=/usr/local/www/llpp ETCDIR=/usr/local/etc/llpp -------------------------------------------------- -- /etc/make.conf -------------------------------------------------- SYNTHPROFILE=Release-5.2 USE_PACKAGE_DEPENDS_ONLY=yes PACKAGE_BUILDING=yes BATCH=yes PKG_CREATE_VERBOSE=yes PORTSDIR=/xports DISTDIR=/distfiles WRKDIRPREFIX=/construction PORT_DBDIR=/options PACKAGES=/packages MAKE_JOBS_NUMBER_LIMIT=5 LICENSES_ACCEPTED= NONE HAVE_COMPAT_IA32_KERN= CONFIGURE_MAX_CMD_LEN=262144 _PERL5_FROM_BIN=5.26.1 _ALTCCVERSION_921dbbb2=none _OBJC_ALTCCVERSION_921dbbb2=none _SMP_CPUS=8 UID=0 ARCH=x86_64 OPSYS=DragonFly DFLYVERSION=500200 OSVERSION=9999999 OSREL=5.2 _OSRELEASE=5.2-SYNTH PYTHONBASE=/usr/local _PKG_CHECKED=1 -------------------------------------------------------------------------------- -- Phase: check-sanity -------------------------------------------------------------------------------- ===> License PUBLIC_DOMAIN BSD3CLAUSE accepted by the user -------------------------------------------------------------------------------- -- Phase: pkg-depends -------------------------------------------------------------------------------- ===> llpp-25_4 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.10.5_1.txz Installing pkg-1.10.5_1... Extracting pkg-1.10.5_1: .......... done ===> llpp-25_4 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of llpp-25_4 -------------------------------------------------------------------------------- -- Phase: fetch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: fetch -------------------------------------------------------------------------------- ===> License PUBLIC_DOMAIN BSD3CLAUSE accepted by the user ===> Fetching all distfiles required by llpp-25_4 for building -------------------------------------------------------------------------------- -- Phase: checksum -------------------------------------------------------------------------------- ===> License PUBLIC_DOMAIN BSD3CLAUSE accepted by the user ===> Fetching all distfiles required by llpp-25_4 for building => SHA256 Checksum OK for llpp/v25.tar.gz. -------------------------------------------------------------------------------- -- Phase: extract-depends -------------------------------------------------------------------------------- ===> llpp-25_4 depends on file: /usr/local/bin/ocamlc - not found ===> Installing existing package /packages/All/ocaml-4.02.3.txz Installing ocaml-4.02.3... `-- Installing libX11-1.6.5,1... | `-- Installing kbproto-1.0.7... | `-- Extracting kbproto-1.0.7: .......... done | `-- Installing libXau-1.0.8_3... | | `-- Installing xproto-7.0.31... | | `-- Extracting xproto-7.0.31: .......... done | `-- Extracting libXau-1.0.8_3: .......... done | `-- Installing libXdmcp-1.1.2... | `-- Extracting libXdmcp-1.1.2: ......... done | `-- Installing libxcb-1.13... | | `-- Installing libpthread-stubs-0.4... | | `-- Extracting libpthread-stubs-0.4: .... done | | `-- Installing libxml2-2.9.7... | | `-- Extracting libxml2-2.9.7: .......... done | `-- Extracting libxcb-1.13: .......... done `-- Extracting libX11-1.6.5,1: .......... done Extracting ocaml-4.02.3: .......... done ===> llpp-25_4 depends on file: /usr/local/bin/ocamlc - found ===> Returning to build of llpp-25_4 -------------------------------------------------------------------------------- -- Phase: extract -------------------------------------------------------------------------------- ===> License PUBLIC_DOMAIN BSD3CLAUSE accepted by the user ===> Fetching all distfiles required by llpp-25_4 for building ===> Extracting for llpp-25_4 => SHA256 Checksum OK for llpp/v25.tar.gz. -------------------------------------------------------------------------------- -- Phase: patch-depends -------------------------------------------------------------------------------- ===> llpp-25_4 depends on file: /usr/local/bin/ocamlc - found -------------------------------------------------------------------------------- -- Phase: patch -------------------------------------------------------------------------------- ===> Patching for llpp-25_4 ===> Applying ports patches for llpp-25_4 -------------------------------------------------------------------------------- -- Phase: build-depends -------------------------------------------------------------------------------- ===> llpp-25_4 depends on executable: gsed - not found ===> Installing existing package /packages/All/gsed-4.2.2_1.txz Installing gsed-4.2.2_1... `-- Installing gettext-runtime-0.19.8.1_1... | `-- Installing indexinfo-0.3.1... | `-- Extracting indexinfo-0.3.1: .... done `-- Extracting gettext-runtime-0.19.8.1_1: .......... done Extracting gsed-4.2.2_1: .......... done ===> llpp-25_4 depends on executable: gsed - found ===> Returning to build of llpp-25_4 ===> llpp-25_4 depends on file: /usr/local/bin/ocamlc - found ===> llpp-25_4 depends on executable: update-desktop-database - not found ===> Installing existing package /packages/All/desktop-file-utils-0.23.txz Installing desktop-file-utils-0.23... `-- Installing glib-2.50.3_4,1... | `-- Installing libffi-3.2.1_2... | `-- Extracting libffi-3.2.1_2: .......... done | `-- Installing libiconv-1.14_11... | `-- Extracting libiconv-1.14_11: .......... done | `-- Installing pcre-8.42... | `-- Extracting pcre-8.42: .......... done | `-- Installing perl5-5.26.2... | `-- Extracting perl5-5.26.2: .......... done | `-- Installing python27-2.7.15... | | `-- Installing expat-2.2.5... | | `-- Extracting expat-2.2.5: .......... done | | `-- Installing libressl-2.7.4... | | `-- Extracting libressl-2.7.4: .......... done | | `-- Installing ncurses-6.0.0s20171223_1... | | `-- Extracting ncurses-6.0.0s20171223_1: .......... done | | `-- Installing readline-7.0.3_1... | | `-- Extracting readline-7.0.3_1: .......... done | `-- Extracting python27-2.7.15: .......... done `-- Extracting glib-2.50.3_4,1: .......... done No schema files found: doing nothing. Extracting desktop-file-utils-0.23: .......... done Message from perl5-5.26.2: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Message from python27-2.7.15: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== ===> llpp-25_4 depends on executable: update-desktop-database - found ===> Returning to build of llpp-25_4 ===> llpp-25_4 depends on executable: gmake - not found ===> Installing existing package /packages/All/gmake-4.2.1_2.txz Installing gmake-4.2.1_2... Extracting gmake-4.2.1_2: .......... done ===> llpp-25_4 depends on executable: gmake - found ===> Returning to build of llpp-25_4 ===> llpp-25_4 depends on file: /usr/local/lib/libcrypto.so.43 - found ===> llpp-25_4 depends on file: /usr/local/lib/libGL.so - not found ===> Installing existing package /packages/All/mesa-libs-18.1.2.txz Installing mesa-libs-18.1.2... `-- Installing libXdamage-1.1.4_3... | `-- Installing damageproto-1.2.1... | `-- Extracting damageproto-1.2.1: .... done | `-- Installing libXfixes-5.0.3... | | `-- Installing fixesproto-5.0... | | `-- Extracting fixesproto-5.0: .... done | `-- Extracting libXfixes-5.0.3: .......... done `-- Extracting libXdamage-1.1.4_3: ...... done `-- Installing libXext-1.3.3_1,1... | `-- Installing xextproto-7.3.0... | `-- Extracting xextproto-7.3.0: .......... done `-- Extracting libXext-1.3.3_1,1: .......... done `-- Installing libXxf86vm-1.1.4_1... | `-- Installing xf86vidmodeproto-2.3.1... | `-- Extracting xf86vidmodeproto-2.3.1: .... done `-- Extracting libXxf86vm-1.1.4_1: .......... done `-- Installing libdrm-2.4.92,1... | `-- Installing libpciaccess-0.13.5... | | `-- Installing pciids-20180428... | | `-- Extracting pciids-20180428: ..... done | `-- Extracting libpciaccess-0.13.5: ......... done `-- Extracting libdrm-2.4.92,1: .......... done `-- Installing libelf-0.8.13_3... `-- Extracting libelf-0.8.13_3: .......... done `-- Installing libxshmfence-1.2_2... `-- Extracting libxshmfence-1.2_2: ......... done Extracting mesa-libs-18.1.2: .......... done ===> llpp-25_4 depends on file: /usr/local/lib/libGL.so - found ===> Returning to build of llpp-25_4 ===> llpp-25_4 depends on file: /usr/local/libdata/pkgconfig/glproto.pc - not found ===> Installing existing package /packages/All/glproto-1.4.17.txz Installing glproto-1.4.17... Extracting glproto-1.4.17: ...... done ===> llpp-25_4 depends on file: /usr/local/libdata/pkgconfig/glproto.pc - found ===> Returning to build of llpp-25_4 ===> llpp-25_4 depends on file: /usr/local/libdata/pkgconfig/dri2proto.pc - not found ===> Installing existing package /packages/All/dri2proto-2.8.txz Installing dri2proto-2.8... Extracting dri2proto-2.8: .... done ===> llpp-25_4 depends on file: /usr/local/libdata/pkgconfig/dri2proto.pc - found ===> Returning to build of llpp-25_4 ===> llpp-25_4 depends on file: /usr/local/libdata/pkgconfig/dri3proto.pc - not found ===> Installing existing package /packages/All/dri3proto-1.0.txz Installing dri3proto-1.0... Extracting dri3proto-1.0: ...... done ===> llpp-25_4 depends on file: /usr/local/libdata/pkgconfig/dri3proto.pc - found ===> Returning to build of llpp-25_4 ===> llpp-25_4 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found ===> llpp-25_4 depends on file: /usr/local/libdata/pkgconfig/xext.pc - found -------------------------------------------------------------------------------- -- Phase: lib-depends -------------------------------------------------------------------------------- ===> llpp-25_4 depends on shared library: libcurl.so - not found ===> Installing existing package /packages/All/curl-7.60.0.txz Installing curl-7.60.0... `-- Installing ca_root_nss-3.38... `-- Extracting ca_root_nss-3.38: ........ done `-- Installing krb5-1.16.1_5... | `-- Installing pkgconf-1.4.2,1... | `-- Extracting pkgconf-1.4.2,1: .......... done `-- Extracting krb5-1.16.1_5: .......... done `-- Installing libnghttp2-1.32.0... `-- Extracting libnghttp2-1.32.0: .......... done Extracting curl-7.60.0: .......... done Message from ca_root_nss-3.38: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** ===> llpp-25_4 depends on shared library: libcurl.so - found (/usr/local/lib/libcurl.so) ===> Returning to build of llpp-25_4 ===> llpp-25_4 depends on shared library: libfreetype.so - not found ===> Installing existing package /packages/All/freetype2-2.9.1.txz Installing freetype2-2.9.1... Extracting freetype2-2.9.1: .......... done Message from freetype2-2.9.1: The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/ft2-toc.html, if documentation was installed). ===> llpp-25_4 depends on shared library: libfreetype.so - found (/usr/local/lib/libfreetype.so) ===> Returning to build of llpp-25_4 ===> llpp-25_4 depends on shared library: libharfbuzz.so - not found ===> Installing existing package /packages/All/harfbuzz-1.8.2.txz Installing harfbuzz-1.8.2... `-- Installing cairo-1.14.8_1,2... | `-- Installing fontconfig-2.12.6,1... | `-- Extracting fontconfig-2.12.6,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | `-- Installing libXrender-0.9.10... | | `-- Installing renderproto-0.11.1... | | `-- Extracting renderproto-0.11.1: .... done | `-- Extracting libXrender-0.9.10: .......... done | `-- Installing pixman-0.34.0... | `-- Extracting pixman-0.34.0: .......... done | `-- Installing png-1.6.34... | `-- Extracting png-1.6.34: .......... done | `-- Installing xcb-util-renderutil-0.3.9_1... | | `-- Installing xcb-util-0.4.0_2,1... | | `-- Extracting xcb-util-0.4.0_2,1: .......... done | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done `-- Extracting cairo-1.14.8_1,2: .......... done `-- Installing graphite2-1.3.11... `-- Extracting graphite2-1.3.11: .......... done Extracting harfbuzz-1.8.2: .......... done ===> llpp-25_4 depends on shared library: libharfbuzz.so - found (/usr/local/lib/libharfbuzz.so) ===> Returning to build of llpp-25_4 ===> llpp-25_4 depends on shared library: libjbig2dec.so - not found ===> Installing existing package /packages/All/jbig2dec-0.14.txz Installing jbig2dec-0.14... Extracting jbig2dec-0.14: .......... done ===> llpp-25_4 depends on shared library: libjbig2dec.so - found (/usr/local/lib/libjbig2dec.so) ===> Returning to build of llpp-25_4 ===> llpp-25_4 depends on shared library: libmupdf.so - not found ===> Installing existing package /packages/All/mupdf-1.12.0,1.txz Installing mupdf-1.12.0,1... `-- Installing freeglut-3.0.0_1... | `-- Installing libGLU-9.0.0_3... | `-- Extracting libGLU-9.0.0_3: ...... done | `-- Installing libICE-1.0.9_1,1... | `-- Extracting libICE-1.0.9_1,1: .......... done | `-- Installing libXi-1.7.9,1... | | `-- Installing inputproto-2.3.2... | | `-- Extracting inputproto-2.3.2: ........ done | `-- Extracting libXi-1.7.9,1: .......... done | `-- Installing libXrandr-1.5.1... | | `-- Installing randrproto-1.5.0... | | `-- Extracting randrproto-1.5.0: ....... done | `-- Extracting libXrandr-1.5.1: .......... done `-- Extracting freeglut-3.0.0_1: .......... done `-- Installing jpeg-turbo-1.5.3... `-- Extracting jpeg-turbo-1.5.3: .......... done `-- Installing libXcursor-1.1.15... `-- Extracting libXcursor-1.1.15: .......... done `-- Installing libXinerama-1.1.3_3,1... | `-- Installing xineramaproto-1.2.1... | `-- Extracting xineramaproto-1.2.1: .. done `-- Extracting libXinerama-1.1.3_3,1: .......... done `-- Installing openjpeg-2.3.0... | `-- Installing lcms2-2.9... | | `-- Installing tiff-4.0.9_1... | | `-- Installing jbigkit-2.1_1... | | `-- Extracting jbigkit-2.1_1: .......... done | | `-- Extracting tiff-4.0.9_1: .......... done | `-- Extracting lcms2-2.9: .......... done `-- Extracting openjpeg-2.3.0: .......... done Extracting mupdf-1.12.0,1: .......... done Message from freeglut-3.0.0_1: Joystick support is untested and it is unknown if it works. Do not hesitate to contact x11@FreeBSD.org if this causes issues. ===> llpp-25_4 depends on shared library: libmupdf.so - found (/usr/local/lib/libmupdf.so) ===> Returning to build of llpp-25_4 ===> llpp-25_4 depends on shared library: libopenjp2.so - found (/usr/local/lib/libopenjp2.so) ===> llpp-25_4 depends on shared library: libjpeg.so - found (/usr/local/lib/libjpeg.so) -------------------------------------------------------------------------------- -- Phase: configure -------------------------------------------------------------------------------- ===> Configuring for llpp-25_4 -------------------------------------------------------------------------------- -- Phase: build -------------------------------------------------------------------------------- ===> Building for llpp-25_4 + ocamlc.opt -ccopt ' -Wno-pointer-sign -I/usr/local/include -o build/lablGL/ml_raw.o' -c ./lablGL/ml_raw.c + ocamlc.opt -ccopt ' -Wno-pointer-sign -I/usr/local/include -o build/lablGL/ml_gl.o' -c ./lablGL/ml_gl.c + ocamlc.opt -ccopt ' -Wno-pointer-sign -I/usr/local/include -o build/lablGL/ml_glarray.o' -c ./lablGL/ml_glarray.c + ocamlc.opt -ccopt '-I/usr/local/include/freetype2 -I/usr/local/include -Wextra -Wall -Wno-variadic-macros -D_GNU_SOURCE -std=c99 -pedantic-errors -Wunused-parameter -Wsign-compare -Wshadow -o build/link.o' -c ./link.c + /bin/sh ./mkhelp.sh ./KEYS v25 + ocamlc.opt -c -I ./lablGL -I build/lablGL -o build/lablGL/gl.cmo ./lablGL/gl.ml + ocamlc.opt -c -I ./lablGL -I build/lablGL -o build/lablGL/raw.cmo ./lablGL/raw.ml + ocamlc.opt -c -I ./lablGL -I build/lablGL -o build/lablGL/glPix.cmo ./lablGL/glPix.ml + ocamlc.opt -c -I ./lablGL -I build/lablGL -o build/lablGL/glDraw.cmo ./lablGL/glDraw.ml + ocamlc.opt -c -I ./lablGL -I build/lablGL -o build/lablGL/glTex.cmi ./lablGL/glTex.mli + ocamlc.opt -c -I ./lablGL -I build/lablGL -o build/lablGL/glMisc.cmi ./lablGL/glMisc.mli + ocamlc.opt -c -I ./lablGL -I build/lablGL -o build/lablGL/glMat.cmo ./lablGL/glMat.ml + ocamlc.opt -c -I ./lablGL -I build/lablGL -o build/lablGL/glMisc.cmo ./lablGL/glMisc.ml + ocamlc.opt -c -I ./lablGL -I build/lablGL -o build/lablGL/glFunc.cmo ./lablGL/glFunc.ml + ocamlc.opt -c -I ./lablGL -I build/lablGL -o build/lablGL/glTex.cmo ./lablGL/glTex.ml + ocamlc.opt -c -I ./lablGL -I build/lablGL -o build/lablGL/glArray.cmo ./lablGL/glArray.ml + ocamlc.opt -c -I ./lablGL -I build/lablGL -o build/lablGL/glClear.cmo ./lablGL/glClear.ml + ocamlc.opt -c -o build/help.cmo build/help.ml + ocamlc.opt -c -warn-error +a -w +a -g -safe-string -o build/utils.cmo ./utils.ml + ocamlc.opt -c -warn-error +a -w +a -g -safe-string -I build -o build/parser.cmo ./parser.ml + ocamlc.opt -c -warn-error +a -w +a -g -safe-string -I build -o build/keys.cmo ./keys.ml + ocamlc.opt -c -warn-error +a -w +a -g -safe-string -I build -o build/wsi.cmi ./wsi.mli + ocamlc.opt -c -I ./lablGL -I build/lablGL -I build -o build/config.cmo ./config.ml + ocamlc.opt -c -I ./lablGL -I build/lablGL -I build -o build/main.cmo ./main.ml + ocamlc.opt -c -warn-error +a -w +a -g -safe-string -I build -o build/wsi.cmo ./wsi.ml + ocamlc.opt -custom -I lablGL -o build/llpp unix.cma str.cma build/help.cmo build/lablGL/raw.cmo build/utils.cmo build/parser.cmo build/lablGL/glMisc.cmo build/wsi.cmo build/lablGL/gl.cmo build/lablGL/glMat.cmo build/lablGL/glFunc.cmo build/lablGL/glClear.cmo build/lablGL/glPix.cmo build/lablGL/glTex.cmo build/lablGL/glDraw.cmo build/config.cmo build/lablGL/glArray.cmo build/main.cmo build/link.o -cclib '-L/usr/local/lib -lGL -lX11 -lmupdf -lmupdfthird -lharfbuzz -lz -lfreetype -ljpeg -ljbig2dec -lopenjp2 -lpthread -L./mupdf/build/native -lcrypto build/lablGL/ml_gl.o build/lablGL/ml_glarray.o build/lablGL/ml_raw.o' gmake[1]: Entering directory '/construction/graphics/llpp/llpp-v25-14986ea/misc/completions' wrote: bash/llpp wrote: bash/llppac wrote: zsh/llpp wrote: zsh/llppac gmake[1]: Leaving directory '/construction/graphics/llpp/llpp-v25-14986ea/misc/completions' -------------------------------------------------------------------------------- -- Phase: run-depends -------------------------------------------------------------------------------- ===> llpp-25_4 depends on executable: xsel - not found ===> Installing existing package /packages/All/xsel-conrad-1.2.0_1.txz Installing xsel-conrad-1.2.0_1... `-- Installing libXt-1.1.5,1... | `-- Installing libSM-1.2.2_3,1... | `-- Extracting libSM-1.2.2_3,1: .......... done `-- Extracting libXt-1.1.5,1: .......... done Extracting xsel-conrad-1.2.0_1: ....... done ===> llpp-25_4 depends on executable: xsel - found ===> Returning to build of llpp-25_4 ===> llpp-25_4 depends on executable: update-desktop-database - found ===> llpp-25_4 depends on file: /usr/local/lib/libcrypto.so.43 - found ===> llpp-25_4 depends on file: /usr/local/lib/libGL.so - found ===> llpp-25_4 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found ===> llpp-25_4 depends on file: /usr/local/libdata/pkgconfig/xext.pc - found -------------------------------------------------------------------------------- -- Phase: stage -------------------------------------------------------------------------------- ===> Staging for llpp-25_4 ===> Generating temporary packing list install -m 555 /construction/graphics/llpp/llpp-v25-14986ea/build/llpp /construction/graphics/llpp/stage/usr/local/bin/llpp install -m 555 /construction/graphics/llpp/llpp-v25-14986ea/misc/llppac /construction/graphics/llpp/stage/usr/local/bin/llppac install -m 0644 /construction/graphics/llpp/llpp-v25-14986ea/misc/llpp.desktop /construction/graphics/llpp/stage/usr/local/share/applications/ /bin/mkdir -p /construction/graphics/llpp/stage/usr/local/etc/bash_completion.d install -m 0644 /construction/graphics/llpp/llpp-v25-14986ea/misc/completions/bash/llpp /construction/graphics/llpp/stage/usr/local/etc/bash_completion.d/_llpp.bash install -m 0644 /construction/graphics/llpp/llpp-v25-14986ea/misc/completions/bash/llppac /construction/graphics/llpp/stage/usr/local/etc/bash_completion.d/_llppac.bash /bin/mkdir -p /construction/graphics/llpp/stage/usr/local/share/zsh/site-functions install -m 0644 /construction/graphics/llpp/llpp-v25-14986ea/misc/completions/zsh/llpp /construction/graphics/llpp/stage/usr/local/share/zsh/site-functions/_llpp install -m 0644 /construction/graphics/llpp/llpp-v25-14986ea/misc/completions/zsh/llppac /construction/graphics/llpp/stage/usr/local/share/zsh/site-functions/_llppac ====> Compressing man pages (compress-man) -------------------------------------------------------------------------------- -- Phase: package -------------------------------------------------------------------------------- ===> Building package for llpp-25_4 file sizes/checksums [11]: . done packing files [11]: . done packing directories [0]: . done -------------------------------------------------- -- Termination -------------------------------------------------- Finished: Saturday, 21 JUL 2018 at 12:32:34 UTC Duration: 00:00:52