=> Building devel/libr3 Started : Friday, 20 JUL 2018 at 17:06:02 UTC Platform: 5.3-DEVELOPMENT DragonFly v5.3.0.242.g757c0-DEVELOPMENT #30: Tue May 8 14:06:27 PDT 2018 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 -------------------------------------------------- -- Environment -------------------------------------------------- UNAME_r=5.2-SYNTH UNAME_m=x86_64 UNAME_p=x86_64 UNAME_v=DragonFly 5.2-SYNTH UNAME_s=DragonFly PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SSL_NO_VERIFY_PEER=1 TERM=dumb PKG_CACHEDIR=/var/cache/pkg8 PKG_DBDIR=/var/db/pkg8 PORTSDIR=/xports LANG=C HOME=/root USER=root -------------------------------------------------- -- Options -------------------------------------------------- -------------------------------------------------- -- CONFIGURE_ENV -------------------------------------------------- PKG_CONFIG=pkgconf XDG_DATA_HOME=/construction/devel/libr3 XDG_CONFIG_HOME=/construction/devel/libr3 HOME=/construction/devel/libr3 TMPDIR="/tmp" PATH=/construction/devel/libr3/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 CONFIG_SITE=/xports/Templates/config.site lt_cv_sys_max_cmd_len=262144 -------------------------------------------------- -- CONFIGURE_ARGS -------------------------------------------------- --enable-graphviz --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} -------------------------------------------------- -- MAKE_ENV -------------------------------------------------- XDG_DATA_HOME=/construction/devel/libr3 XDG_CONFIG_HOME=/construction/devel/libr3 HOME=/construction/devel/libr3 TMPDIR="/tmp" PATH=/construction/devel/libr3/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" -------------------------------------------------- -- MAKE_ARGS -------------------------------------------------- DESTDIR=/construction/devel/libr3/stage -------------------------------------------------- -- PLIST_SUB -------------------------------------------------- PORTDOCS="" PORTEXAMPLES="" OSREL=5.2 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/libr3" EXAMPLESDIR="share/examples/libr3" DATADIR="share/libr3" WWWDIR="www/libr3" ETCDIR="etc/libr3" -------------------------------------------------- -- SUB_LIST -------------------------------------------------- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/libr3 DOCSDIR=/usr/local/share/doc/libr3 EXAMPLESDIR=/usr/local/share/examples/libr3 WWWDIR=/usr/local/www/libr3 ETCDIR=/usr/local/etc/libr3 -------------------------------------------------- -- /etc/make.conf -------------------------------------------------- SYNTHPROFILE=Release-5.2 USE_PACKAGE_DEPENDS_ONLY=yes PACKAGE_BUILDING=yes BATCH=yes PKG_CREATE_VERBOSE=yes PORTSDIR=/xports DISTDIR=/distfiles WRKDIRPREFIX=/construction PORT_DBDIR=/options PACKAGES=/packages MAKE_JOBS_NUMBER_LIMIT=5 LICENSES_ACCEPTED= NONE HAVE_COMPAT_IA32_KERN= CONFIGURE_MAX_CMD_LEN=262144 _PERL5_FROM_BIN=5.26.1 _ALTCCVERSION_921dbbb2=none _OBJC_ALTCCVERSION_921dbbb2=none _SMP_CPUS=8 UID=0 ARCH=x86_64 OPSYS=DragonFly DFLYVERSION=500200 OSVERSION=9999999 OSREL=5.2 _OSRELEASE=5.2-SYNTH PYTHONBASE=/usr/local _PKG_CHECKED=1 -------------------------------------------------------------------------------- -- Phase: check-sanity -------------------------------------------------------------------------------- ===> License MIT accepted by the user -------------------------------------------------------------------------------- -- Phase: pkg-depends -------------------------------------------------------------------------------- ===> libr3-1.0.0_2 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.10.5_1.txz Installing pkg-1.10.5_1... Extracting pkg-1.10.5_1: .......... done ===> libr3-1.0.0_2 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of libr3-1.0.0_2 -------------------------------------------------------------------------------- -- Phase: fetch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: fetch -------------------------------------------------------------------------------- ===> License MIT accepted by the user ===> Fetching all distfiles required by libr3-1.0.0_2 for building -------------------------------------------------------------------------------- -- Phase: checksum -------------------------------------------------------------------------------- ===> License MIT accepted by the user ===> Fetching all distfiles required by libr3-1.0.0_2 for building => SHA256 Checksum OK for c9s-r3-1.0.0_GH0.tar.gz. -------------------------------------------------------------------------------- -- Phase: extract-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: extract -------------------------------------------------------------------------------- ===> License MIT accepted by the user ===> Fetching all distfiles required by libr3-1.0.0_2 for building ===> Extracting for libr3-1.0.0_2 => SHA256 Checksum OK for c9s-r3-1.0.0_GH0.tar.gz. -------------------------------------------------------------------------------- -- Phase: patch-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: patch -------------------------------------------------------------------------------- ===> Patching for libr3-1.0.0_2 -------------------------------------------------------------------------------- -- Phase: build-depends -------------------------------------------------------------------------------- ===> libr3-1.0.0_2 depends on package: autoconf>=2.69 - not found ===> Installing existing package /packages/All/autoconf-2.69_1.txz Installing autoconf-2.69_1... `-- Installing autoconf-wrapper-20131203... `-- Extracting autoconf-wrapper-20131203: .......... done `-- Installing indexinfo-0.3.1... `-- Extracting indexinfo-0.3.1: .... done `-- Installing m4-1.4.18,1... `-- Extracting m4-1.4.18,1: .......... done `-- Installing perl5-5.26.2... `-- Extracting perl5-5.26.2: .......... done Extracting autoconf-2.69_1: .......... done Message from perl5-5.26.2: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. ===> libr3-1.0.0_2 depends on package: autoconf>=2.69 - found ===> Returning to build of libr3-1.0.0_2 ===> libr3-1.0.0_2 depends on package: automake>=1.16.1 - not found ===> Installing existing package /packages/All/automake-1.16.1.txz Installing automake-1.16.1... Extracting automake-1.16.1: .......... done ===> libr3-1.0.0_2 depends on package: automake>=1.16.1 - found ===> Returning to build of libr3-1.0.0_2 ===> libr3-1.0.0_2 depends on executable: libtoolize - not found ===> Installing existing package /packages/All/libtool-2.4.6.txz Installing libtool-2.4.6... Extracting libtool-2.4.6: .......... done ===> libr3-1.0.0_2 depends on executable: libtoolize - found ===> Returning to build of libr3-1.0.0_2 ===> libr3-1.0.0_2 depends on package: pkgconf>=1.3.0_1 - not found ===> Installing existing package /packages/All/pkgconf-1.4.2,1.txz Installing pkgconf-1.4.2,1... Extracting pkgconf-1.4.2,1: .......... done ===> libr3-1.0.0_2 depends on package: pkgconf>=1.3.0_1 - found ===> Returning to build of libr3-1.0.0_2 -------------------------------------------------------------------------------- -- Phase: lib-depends -------------------------------------------------------------------------------- ===> libr3-1.0.0_2 depends on shared library: libcheck.so - not found ===> Installing existing package /packages/All/check-0.12.0.txz Installing check-0.12.0... Extracting check-0.12.0: .......... done ===> libr3-1.0.0_2 depends on shared library: libcheck.so - found (/usr/local/lib/libcheck.so) ===> Returning to build of libr3-1.0.0_2 ===> libr3-1.0.0_2 depends on shared library: libgvc.so - not found ===> Installing existing package /packages/All/graphviz-2.40.1_5.txz Installing graphviz-2.40.1_5... `-- Installing cairo-1.14.8_1,2... | `-- Installing dri2proto-2.8... | `-- Extracting dri2proto-2.8: .... done | `-- Installing fontconfig-2.12.6,1... | | `-- Installing expat-2.2.5... | | `-- Extracting expat-2.2.5: .......... done | | `-- Installing freetype2-2.9.1... | | `-- Extracting freetype2-2.9.1: .......... done | `-- Extracting fontconfig-2.12.6,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | `-- Installing gettext-runtime-0.19.8.1_1... | `-- Extracting gettext-runtime-0.19.8.1_1: .......... done | `-- Installing glib-2.50.3_4,1... | | `-- Installing libffi-3.2.1_2... | | `-- Extracting libffi-3.2.1_2: .......... done | | `-- Installing libiconv-1.14_11... | | `-- Extracting libiconv-1.14_11: .......... done | | `-- Installing pcre-8.42... | | `-- Extracting pcre-8.42: .......... done | | `-- Installing python27-2.7.15... | | `-- Installing libressl-2.7.4... | | `-- Extracting libressl-2.7.4: .......... done | | `-- Installing ncurses-6.0.0s20171223_1... | | `-- Extracting ncurses-6.0.0s20171223_1: .......... done | | `-- Installing readline-7.0.3_1... | | `-- Extracting readline-7.0.3_1: .......... done | | `-- Extracting python27-2.7.15: .......... done | `-- Extracting glib-2.50.3_4,1: .......... done No schema files found: doing nothing. | `-- Installing glproto-1.4.17... | `-- Extracting glproto-1.4.17: ...... done | `-- Installing libX11-1.6.5,1... | | `-- Installing kbproto-1.0.7... | | `-- Extracting kbproto-1.0.7: .......... done | | `-- Installing libXau-1.0.8_3... | | `-- Installing xproto-7.0.31... | | `-- Extracting xproto-7.0.31: .......... done | | `-- Extracting libXau-1.0.8_3: .......... done | | `-- Installing libXdmcp-1.1.2... | | `-- Extracting libXdmcp-1.1.2: ......... done | | `-- Installing libxcb-1.13... | | `-- Installing libpthread-stubs-0.4... | | `-- Extracting libpthread-stubs-0.4: .... done | | `-- Installing libxml2-2.9.7... | | `-- Extracting libxml2-2.9.7: .......... done | | `-- Extracting libxcb-1.13: .......... done | `-- Extracting libX11-1.6.5,1: .......... done | `-- Installing libXext-1.3.3_1,1... | | `-- Installing xextproto-7.3.0... | | `-- Extracting xextproto-7.3.0: .......... done | `-- Extracting libXext-1.3.3_1,1: .......... done | `-- Installing libXrender-0.9.10... | | `-- Installing renderproto-0.11.1... | | `-- Extracting renderproto-0.11.1: .... done | `-- Extracting libXrender-0.9.10: .......... done | `-- Installing mesa-libs-18.1.2... | | `-- Installing libXdamage-1.1.4_3... | | `-- Installing damageproto-1.2.1... | | `-- Extracting damageproto-1.2.1: .... done | | `-- Installing libXfixes-5.0.3... | | | `-- Installing fixesproto-5.0... | | | `-- Extracting fixesproto-5.0: .... done | | `-- Extracting libXfixes-5.0.3: .......... done | | `-- Extracting libXdamage-1.1.4_3: ...... done | | `-- Installing libXxf86vm-1.1.4_1... | | `-- Installing xf86vidmodeproto-2.3.1... | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | | `-- Installing libdrm-2.4.92,1... | | `-- Installing libpciaccess-0.13.5... | | | `-- Installing pciids-20180428... | | | `-- Extracting pciids-20180428: ..... done | | `-- Extracting libpciaccess-0.13.5: ......... done | | `-- Extracting libdrm-2.4.92,1: .......... done | | `-- Installing libelf-0.8.13_3... | | `-- Extracting libelf-0.8.13_3: .......... done | | `-- Installing libxshmfence-1.2_2... | | `-- Extracting libxshmfence-1.2_2: ......... done | `-- Extracting mesa-libs-18.1.2: .......... done | `-- Installing pixman-0.34.0... | `-- Extracting pixman-0.34.0: .......... done | `-- Installing png-1.6.34... | `-- Extracting png-1.6.34: .......... done | `-- Installing xcb-util-renderutil-0.3.9_1... | | `-- Installing xcb-util-0.4.0_2,1... | | `-- Extracting xcb-util-0.4.0_2,1: .......... done | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done `-- Extracting cairo-1.14.8_1,2: .......... done `-- Installing jpeg-turbo-1.5.3... `-- Extracting jpeg-turbo-1.5.3: .......... done `-- Installing libICE-1.0.9_1,1... `-- Extracting libICE-1.0.9_1,1: .......... done `-- Installing libSM-1.2.2_3,1... `-- Extracting libSM-1.2.2_3,1: .......... done `-- Installing libXaw-1.0.13,2... | `-- Installing libXmu-1.1.2_3,1... | | `-- Installing libXt-1.1.5,1... | | `-- Extracting libXt-1.1.5,1: .......... done | `-- Extracting libXmu-1.1.2_3,1: .......... done | `-- Installing libXp-1.0.3,1... | | `-- Installing printproto-1.0.5... | | `-- Extracting printproto-1.0.5: .... done | `-- Extracting libXp-1.0.3,1: .......... done | `-- Installing libXpm-3.5.12... | `-- Extracting libXpm-3.5.12: .......... done `-- Extracting libXaw-1.0.13,2: .......... done `-- Installing libgd-2.2.4_1,1... | `-- Installing tiff-4.0.9_1... | | `-- Installing jbigkit-2.1_1... | | `-- Extracting jbigkit-2.1_1: .......... done | `-- Extracting tiff-4.0.9_1: .......... done | `-- Installing webp-1.0.0... | | `-- Installing giflib-5.1.4... | | `-- Extracting giflib-5.1.4: .......... done | `-- Extracting webp-1.0.0: .......... done `-- Extracting libgd-2.2.4_1,1: .......... done `-- Installing libltdl-2.4.6... `-- Extracting libltdl-2.4.6: .......... done `-- Installing pango-1.42.0... | `-- Installing encodings-1.0.4_4,1... | | `-- Installing font-util-1.3.1... | | `-- Extracting font-util-1.3.1: .......... done | `-- Extracting encodings-1.0.4_4,1: .......... done | `-- Installing fribidi-0.19.7... | `-- Extracting fribidi-0.19.7: .......... done | `-- Installing harfbuzz-1.8.2... | | `-- Installing graphite2-1.3.11... | | `-- Extracting graphite2-1.3.11: .......... done | `-- Extracting harfbuzz-1.8.2: .......... done | `-- Installing libXft-2.3.2_1... | `-- Extracting libXft-2.3.2_1: .......... done | `-- Installing xorg-fonts-truetype-7.7_1... | | `-- Installing dejavu-2.37... | | `-- Installing mkfontdir-1.0.7... | | | `-- Installing mkfontscale-1.1.3... | | | `-- Installing libfontenc-1.1.3_1... | | | `-- Extracting libfontenc-1.1.3_1: ......... done | | | `-- Extracting mkfontscale-1.1.3: ..... done | | `-- Extracting mkfontdir-1.0.7: ..... done | | `-- Extracting dejavu-2.37: .......... done | | `-- Installing font-bh-ttf-1.0.3_3... | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | `-- Installing font-misc-ethiopic-1.0.3_3... | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | `-- Installing font-misc-meltho-1.0.3_3... | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done `-- Extracting pango-1.42.0: .......... done Extracting graphviz-2.40.1_5: .......... done Message from freetype2-2.9.1: The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/ft2-toc.html, if documentation was installed). Message from python27-2.7.15: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== Message from dejavu-2.37: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. ===> libr3-1.0.0_2 depends on shared library: libgvc.so - found (/usr/local/lib/graphviz/libgvc.so) ===> Returning to build of libr3-1.0.0_2 ===> libr3-1.0.0_2 depends on shared library: libpcre.so - found (/usr/local/lib/libpcre.so) -------------------------------------------------------------------------------- -- Phase: configure -------------------------------------------------------------------------------- ===> Configuring for libr3-1.0.0_2 libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:6: installing './compile' configure.ac:6: installing './config.guess' configure.ac:6: installing './config.sub' configure.ac:5: installing './missing' src/Makefile.am: installing './depcomp' configure: loading site script /xports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking build system type... x86_64-portbld-dragonfly5.2 checking host system type... x86_64-portbld-dragonfly5.2 checking how to print strings... printf checking whether make supports the include directive... yes (GNU style) checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking whether cc understands -c and -o together... yes checking dependency style of cc... gcc3 checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for fgrep... (cached) /usr/bin/fgrep checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... (cached) 262144 checking how to convert x86_64-portbld-dragonfly5.2 file names to x86_64-portbld-dragonfly5.2 format... func_convert_file_noop checking how to convert x86_64-portbld-dragonfly5.2 file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from cc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... cpp checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for dlfcn.h... (cached) yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly5.2 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ISO C89... (cached) none needed checking whether cc understands -c and -o together... (cached) yes checking dependency style of cc... (cached) gcc3 checking for cc option to accept ISO C99... none needed checking for cc option to accept ISO Standard C... (cached) none needed configure: WARNING: AM_PATH_CHECK() is deprecated configure: WARNING: use PKG_CHECK_MODULES([CHECK], [check >= 0.9.4]) instead checking for check - version >= 0.8.2... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for sys/time.h... (cached) yes checking for inline... inline checking for size_t... (cached) yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... (cached) yes checking for stdlib.h... (cached) yes checking for GNU libc compatible realloc... yes checking for gettimeofday... (cached) yes checking for memset... (cached) yes checking for strchr... (cached) yes checking for strdup... (cached) yes checking for strndup... (cached) yes checking for strstr... (cached) yes checking pkg-config is at least version 0.9.0... yes checking for GVC_DEPS... yes checking for DEPS... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating r3.pc config.status: creating Makefile config.status: creating src/Makefile config.status: creating tests/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands -------------------------------------------------------------------------------- -- Phase: build -------------------------------------------------------------------------------- ===> Building for libr3-1.0.0_2 --- all --- /usr/bin/make all-recursive --- all-recursive --- Making all in src --- node.lo --- --- edge.lo --- --- str.lo --- --- token.lo --- --- gvc.lo --- --- node.lo --- /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT node.lo -MD -MP -MF .deps/node.Tpo -c -o node.lo node.c --- edge.lo --- /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT edge.lo -MD -MP -MF .deps/edge.Tpo -c -o edge.lo edge.c --- str.lo --- /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT str.lo -MD -MP -MF .deps/str.Tpo -c -o str.lo str.c --- token.lo --- /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT token.lo -MD -MP -MF .deps/token.Tpo -c -o token.lo token.c --- gvc.lo --- /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT gvc.lo -MD -MP -MF .deps/gvc.Tpo -c -o gvc.lo gvc.c --- node.lo --- libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT node.lo -MD -MP -MF .deps/node.Tpo -c node.c -fPIC -DPIC -o .libs/node.o --- edge.lo --- libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT edge.lo -MD -MP -MF .deps/edge.Tpo -c edge.c -fPIC -DPIC -o .libs/edge.o --- node.lo --- node.c:33:12: warning: 'strdiff' defined but not used [-Wunused-function] static int strdiff(char * d1, char * d2) { ^ --- edge.lo --- libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT edge.lo -MD -MP -MF .deps/edge.Tpo -c edge.c -o edge.o >/dev/null 2>&1 --- gvc.lo --- libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT gvc.lo -MD -MP -MF .deps/gvc.Tpo -c gvc.c -fPIC -DPIC -o .libs/gvc.o --- edge.lo --- mv -f .deps/edge.Tpo .deps/edge.Plo --- str.lo --- libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT str.lo -MD -MP -MF .deps/str.Tpo -c str.c -fPIC -DPIC -o .libs/str.o --- token.lo --- libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT token.lo -MD -MP -MF .deps/token.Tpo -c token.c -fPIC -DPIC -o .libs/token.o --- str.lo --- libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT str.lo -MD -MP -MF .deps/str.Tpo -c str.c -o str.o >/dev/null 2>&1 --- node.lo --- libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT node.lo -MD -MP -MF .deps/node.Tpo -c node.c -o node.o >/dev/null 2>&1 --- gvc.lo --- libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT gvc.lo -MD -MP -MF .deps/gvc.Tpo -c gvc.c -o gvc.o >/dev/null 2>&1 --- token.lo --- libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -MT token.lo -MD -MP -MF .deps/token.Tpo -c token.c -o token.o >/dev/null 2>&1 --- str.lo --- mv -f .deps/str.Tpo .deps/str.Plo --- token.lo --- mv -f .deps/token.Tpo .deps/token.Plo --- node.lo --- mv -f .deps/node.Tpo .deps/node.Plo --- gvc.lo --- mv -f .deps/gvc.Tpo .deps/gvc.Plo --- libr3.la --- /bin/sh ../libtool --tag=CC --mode=link cc -I/usr/local/include -pthread -I.. -I../include -Wall -I/usr/local/include/graphviz -pipe -O2 -fno-strict-aliasing -o libr3.la -rpath /usr/local/lib node.lo edge.lo str.lo token.lo gvc.lo -L/usr/local/lib -lpcre -lcheck -L/usr/local/lib/graphviz -lgvc -lcgraph -lcdt libtool: link: cc -shared -fPIC -DPIC .libs/node.o .libs/edge.o .libs/str.o .libs/token.o .libs/gvc.o -Wl,-rpath -Wl,/usr/local/lib/graphviz -Wl,-rpath -Wl,/usr/local/lib/graphviz -L/usr/local/lib -lpcre -lcheck -L/usr/local/lib/graphviz /usr/local/lib/graphviz/libgvc.so /usr/local/lib/graphviz/libcgraph.so /usr/local/lib/graphviz/libcdt.so -pthread -O2 -pthread -Wl,-soname -Wl,libr3.so.0 -o .libs/libr3.so.0.0.0 libtool: link: (cd ".libs" && rm -f "libr3.so.0" && ln -s "libr3.so.0.0.0" "libr3.so.0") libtool: link: (cd ".libs" && rm -f "libr3.so" && ln -s "libr3.so.0.0.0" "libr3.so") libtool: link: ar cru .libs/libr3.a node.o edge.o str.o token.o gvc.o /usr/libexec/binutils227/elf/ar: `u' modifier ignored since `D' is the default (see `U') libtool: link: ranlib .libs/libr3.a libtool: link: ( cd ".libs" && rm -f "libr3.la" && ln -s "../libr3.la" "libr3.la" ) Making all in tests -------------------------------------------------------------------------------- -- Phase: run-depends -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Phase: stage -------------------------------------------------------------------------------- ===> Staging for libr3-1.0.0_2 ===> Generating temporary packing list if test -z 'strip'; then /usr/bin/make INSTALL_PROGRAM="/bin/sh /construction/devel/libr3/r3-1.0.0/install-sh -c -s" install_sh_PROGRAM="/bin/sh /construction/devel/libr3/r3-1.0.0/install-sh -c -s" INSTALL_STRIP_FLAG=-s install; else /usr/bin/make INSTALL_PROGRAM="/bin/sh /construction/devel/libr3/r3-1.0.0/install-sh -c -s" install_sh_PROGRAM="/bin/sh /construction/devel/libr3/r3-1.0.0/install-sh -c -s" INSTALL_STRIP_FLAG=-s "INSTALL_PROGRAM_ENV=STRIPPROG='strip'" install; fi Making install in src /bin/mkdir -p '/construction/devel/libr3/stage/usr/local/lib' /bin/sh ../libtool --mode=install /usr/bin/install -c -s libr3.la '/construction/devel/libr3/stage/usr/local/lib' libtool: install: /usr/bin/install -c .libs/libr3.so.0.0.0 /construction/devel/libr3/stage/usr/local/lib/libr3.so.0.0.0 libtool: install: strip --strip-unneeded /construction/devel/libr3/stage/usr/local/lib/libr3.so.0.0.0 libtool: install: (cd /construction/devel/libr3/stage/usr/local/lib && { ln -s -f libr3.so.0.0.0 libr3.so.0 || { rm -f libr3.so.0 && ln -s libr3.so.0.0.0 libr3.so.0; }; }) libtool: install: (cd /construction/devel/libr3/stage/usr/local/lib && { ln -s -f libr3.so.0.0.0 libr3.so || { rm -f libr3.so && ln -s libr3.so.0.0.0 libr3.so; }; }) libtool: install: /usr/bin/install -c .libs/libr3.lai /construction/devel/libr3/stage/usr/local/lib/libr3.la libtool: install: /usr/bin/install -c .libs/libr3.a /construction/devel/libr3/stage/usr/local/lib/libr3.a libtool: install: strip --strip-debug /construction/devel/libr3/stage/usr/local/lib/libr3.a libtool: install: chmod 644 /construction/devel/libr3/stage/usr/local/lib/libr3.a libtool: install: ranlib /construction/devel/libr3/stage/usr/local/lib/libr3.a libtool: warning: remember to run 'libtool --finish /usr/local/lib' Making install in tests /bin/mkdir -p '/construction/devel/libr3/stage/usr/local/libdata/pkgconfig' install -m 0644 r3.pc '/construction/devel/libr3/stage/usr/local/libdata/pkgconfig' /bin/mkdir -p '/construction/devel/libr3/stage/usr/local/include/r3' install -m 0644 include/r3.h include/r3_str.h include/str_array.h '/construction/devel/libr3/stage/usr/local/include/r3' ====> Compressing man pages (compress-man) -------------------------------------------------------------------------------- -- Phase: package -------------------------------------------------------------------------------- ===> Building package for libr3-1.0.0_2 file sizes/checksums [11]: . done packing files [11]: . done packing directories [0]: . done -------------------------------------------------- -- Termination -------------------------------------------------- Finished: Friday, 20 JUL 2018 at 17:07:06 UTC Duration: 00:01:03