=> Building security/wpa_supplicant build started at Wed Oct 5 19:53:46 PDT 2016 port directory: /usr/ports/security/wpa_supplicant building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: ports@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../03//usr/ports/security/wpa_supplicant/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=wpa_supplicant-2.5_2 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ===> The following configuration options are available for wpa_supplicant-2.5_2: DEBUG_FILE=off: Support for writing debug log to a file DEBUG_SYSLOG=on: Send debug messages to syslog instead of stdout DELAYED_MIC=off: Mitigate TKIP attack, random delay on MIC errors HS20=on: Hotspot 2.0 HT_OVERRIDES=off: Disable HT/HT40, mask MCS rates, etc IEEE80211AC=off: Very High Throughput, AP mode (IEEE 802.11ac) IEEE80211N=off: High Throughput, AP mode (IEEE 802.11n) IEEE80211R=on: Fast BSS Transition (IEEE 802.11r-2008) IEEE80211W=off: Management Frame Protection (IEEE 802.11w) INTERWORKING=on: Improve ext. network interworking (IEEE 802.11u) NO_ROAMING=off: Disable roaming P2P=off: Peer-to-Peer support PKCS12=on: PKCS#12 (PFS) support PRIVSEP=off: Privilege separation SMARTCARD=on: Private key on smartcard support TDLS=off: Tunneled Direct Link Setup TLSV12=off: Build with TLS v1.2 instead of TLS v1.0 VHT_OVERRIDES=off: Disable VHT, mask MCS rates, etc WPS=on: Wi-Fi Protected Setup WPS_ER=off: Enable WPS External Registrar WPS_NFC=off: Near Field Communication (NFC) configuration WPS_NOREG=off: Disable open network credentials when registrar ====> Driver options: you have to choose at least one of them BSD=on: BSD net80211 interface WIRED=on: Wired ethernet interface NDIS=on: Windows NDIS interface TEST=off: Development testing interface NONE=off: The 'no driver' interface, e.g. WPS ER only ====> Extensible Authentication Protocols: you have to choose at least one of them TLS=on: Transport Layer Security PEAP=on: Protected Extensible Authentication Protocol TTLS=on: Tunneled Transport Layer Security MD5=on: MD5 hash (deprecated, no key generation) MSCHAPv2=on: Microsoft CHAP version 2 (RFC 2759) GTC=on: Generic Token Card LEAP=on: Lightweight Extensible Authentication Protocol OTP=on: One-Time Password PSK=on: Pre-Shared key FAST=off: Flexible Authentication via Secure Tunneling SIM=off: Subscriber Identity Module PWD=off: Shared password (RFC 5931) PAX=off: Password Authenticated Exchange AKA=off: Autentication and Key Agreement (UMTS) AKA_PRIME=off: AKA Prime variant (RFC 5448) SAKE=off: Shared-Secret Authentication & Key Establishment GPSK=off: Generalized Pre-Shared Key TNC=off: Trusted Network Connect IKEv2=off: Internet Key Exchange version 2 EKE=off: Encrypted Key Exchange ===> Use 'make config' to modify these settings ---End OPTIONS List--- --CONFIGURE_ARGS-- --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- MAKE=gmake XDG_DATA_HOME=/wrkdirs/security/wpa_supplicant XDG_CONFIG_HOME=/wrkdirs/security/wpa_supplicant HOME=/wrkdirs/security/wpa_supplicant TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 --End CONFIGURE_ENV-- --MAKE_ENV-- OPENSSLBASE=/usr/local OPENSSLDIR=/usr/local/openssl OPENSSLINC=/usr/local/include OPENSSLLIB=/usr/local/lib OPENSSLRPATH=/usr/local/lib XDG_DATA_HOME=/wrkdirs/security/wpa_supplicant XDG_CONFIG_HOME=/wrkdirs/security/wpa_supplicant HOME=/wrkdirs/security/wpa_supplicant TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -I/usr/local/include -I/usr/local/include -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="-I/usr/local/include" LDFLAGS=" -L/usr/local/lib -lutil -L/usr/local/lib -Wl,-rpath,/usr/local/lib" LIBS="" CXX="c++" CXXFLAGS=" -pipe -I/usr/local/include -I/usr/local/include -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/wpa_supplicant" EXAMPLESDIR="share/examples/wpa_supplicant" DATADIR="share/wpa_supplicant" WWWDIR="www/wpa_supplicant" ETCDIR="etc/wpa_supplicant" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/wpa_supplicant DOCSDIR=/usr/local/share/doc/wpa_supplicant EXAMPLESDIR=/usr/local/share/examples/wpa_supplicant WWWDIR=/usr/local/www/wpa_supplicant ETCDIR=/usr/local/etc/wpa_supplicant --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== ===> NOTICE: The wpa_supplicant port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port =========================================================================== =================================================== ===> wpa_supplicant-2.5_2 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> wpa_supplicant-2.5_2 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of wpa_supplicant-2.5_2 =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The wpa_supplicant port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> Fetching all distfiles required by wpa_supplicant-2.5_2 for building =========================================================================== =================================================== ===> NOTICE: The wpa_supplicant port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> Fetching all distfiles required by wpa_supplicant-2.5_2 for building => SHA256 Checksum OK for wpa_supplicant-2.5.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The wpa_supplicant port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> Fetching all distfiles required by wpa_supplicant-2.5_2 for building ===> Extracting for wpa_supplicant-2.5_2 => SHA256 Checksum OK for wpa_supplicant-2.5.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for wpa_supplicant-2.5_2 ===> Applying ports patches for wpa_supplicant-2.5_2 /bin/cp /usr/ports/security/wpa_supplicant/files/Packet32.[ch] /usr/ports/security/wpa_supplicant/files/ntddndis.h /wrkdirs/security/wpa_supplicant/wpa_supplicant-2.5/src/utils =========================================================================== =================================================== ===> wpa_supplicant-2.5_2 depends on executable: gmake - not found ===> Installing existing package /packages/All/gmake-4.2.1_1.txz Installing gmake-4.2.1_1... `-- Installing indexinfo-0.2.5... `-- Extracting indexinfo-0.2.5: .... done `-- Installing gettext-runtime-0.19.8.1... `-- Extracting gettext-runtime-0.19.8.1: .......... done Extracting gmake-4.2.1_1: .......... done ===> wpa_supplicant-2.5_2 depends on executable: gmake - found ===> Returning to build of wpa_supplicant-2.5_2 ===> wpa_supplicant-2.5_2 depends on file: /usr/local/lib/libcrypto.so.38 - not found ===> Installing existing package /packages/All/libressl-2.4.3.txz Installing libressl-2.4.3... Extracting libressl-2.4.3: .......... done ===> wpa_supplicant-2.5_2 depends on file: /usr/local/lib/libcrypto.so.38 - found ===> Returning to build of wpa_supplicant-2.5_2 =========================================================================== =================================================== ===> wpa_supplicant-2.5_2 depends on shared library: libreadline.so.6 - not found ===> Installing existing package /packages/All/readline-6.3.8.txz Installing readline-6.3.8... `-- Installing ncurses-6.0_5... `-- Extracting ncurses-6.0_5: .......... done Extracting readline-6.3.8: .......... done Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> wpa_supplicant-2.5_2 depends on shared library: libreadline.so.6 - found (/usr/local/lib/libreadline.so.6) ===> Returning to build of wpa_supplicant-2.5_2 =========================================================================== =================================================== ===> Configuring for wpa_supplicant-2.5_2 =========================================================================== =================================================== ===> Building for wpa_supplicant-2.5_2 gmake[1]: Entering directory '/wrkdirs/security/wpa_supplicant/wpa_supplicant-2.5/wpa_supplicant' CC eap_register.c CC ../src/utils/wpa_debug.c CC notify.c CC ../src/utils/wpabuf.c CC bss.c CC ../src/utils/os_unix.c CC ../src/utils/Packet32.c CC ../src/utils/eloop.c CC ../src/rsn_supp/wpa_ft.c CC wmm_ac.c CC ../src/utils/common.c CC ../src/rsn_supp/preauth.c CC config_file.c CC ../src/rsn_supp/wpa_ie.c CC ../src/rsn_supp/pmksa_cache.c CC ../src/rsn_supp/peerkey.c CC config.c CC ../src/eap_peer/eap_tls.c CC ../src/common/wpa_common.c CC ../src/eap_common/eap_peap_common.c CC ../src/eap_peer/eap_peap.c CC ../src/eap_peer/eap_md5.c CC ../src/rsn_supp/wpa.c CC ../src/eap_peer/mschapv2.c CC ../src/eap_peer/eap_gtc.c CC ../src/eap_peer/eap_mschapv2.c CC ../src/eap_peer/eap_otp.c CC ../src/eap_peer/eap_leap.c CC ../src/eap_common/eap_psk_common.c CC ../src/eap_peer/eap_psk.c CC hs20_supplicant.c CC ../src/utils/uuid.c CC ../src/eap_common/eap_wsc_common.c CC ../src/wps/wps.c CC ../src/eap_peer/eap_wsc.c CC ../src/wps/wps_common.c CC ../src/eap_peer/eap_ttls.c CC ../src/wps/wps_attr_parse.c CC ../src/wps/wps_attr_process.c CC ../src/wps/wps_attr_build.c CC ../src/wps/wps_dev_attr.c CC interworking.c CC ../src/wps/wps_enrollee.c CC ../src/eap_peer/eap_methods.c CC ../src/crypto/ms_funcs.c CC ../src/eap_common/chap.c CC ../src/eapol_supp/eapol_supp_sm.c CC wps_supplicant.c CC ../src/eap_peer/eap.c CC ../src/eap_peer/eap_tls_common.c CC ../src/crypto/aes-ctr.c CC ../src/crypto/aes-eax.c CC ../src/crypto/aes-encblock.c CC ../src/crypto/aes-omac1.c CC ../src/crypto/sha256-prf.c CC ../src/crypto/sha256-tlsprf.c CC ../src/crypto/dh_groups.c CC ../src/crypto/random.c CC ../src/crypto/crypto_openssl.c CC ctrl_iface_unix.c CC ../src/utils/base64.c CC ../src/wps/wps_registrar.c CC ../src/common/hw_features_common.c CC ../src/eap_common/eap_common.c CC ../src/crypto/sha1-prf.c CC ../src/common/ieee802_11_common.c CC ../src/crypto/sha1-tlsprf.c CC ../src/common/gas.c CC offchannel.c CC ../src/drivers/driver_common.c CC gas_query.c CC blacklist.c CC wpas_glue.c CC ../src/crypto/tls_openssl.c CC main.c CC events.c CC ../src/drivers/driver_ndis.c CC ../src/drivers/driver_wired.c CC ../src/drivers/drivers.c CC scan.c CC ../src/l2_packet/l2_packet_freebsd.c CC ../src/common/wpa_ctrl.c CC ../src/utils/edit_readline.c CC wpa_passphrase.c sed systemd/wpa_supplicant.service.in sed systemd/wpa_supplicant.service.arg.in sed systemd/wpa_supplicant-nl80211.service.arg.in sed systemd/wpa_supplicant-wired.service.arg.in sed dbus/fi.epitest.hostap.WPASupplicant.service.in sed dbus/fi.w1.wpa_supplicant1.service.in CC ../src/drivers/driver_bsd.c LD wpa_passphrase CC wpa_supplicant.c CC ctrl_iface.c LD wpa_supplicant CC wpa_cli.c LD wpa_cli gmake[1]: Leaving directory '/wrkdirs/security/wpa_supplicant/wpa_supplicant-2.5/wpa_supplicant' =========================================================================== =================================================== ===> wpa_supplicant-2.5_2 depends on file: /usr/local/lib/libcrypto.so.38 - found =========================================================================== =================================================== ===> Staging for wpa_supplicant-2.5_2 ===> Generating temporary packing list (cd /wrkdirs/security/wpa_supplicant/wpa_supplicant-2.5/wpa_supplicant && install -s -m 555 wpa_supplicant wpa_cli wpa_passphrase /wrkdirs/security/wpa_supplicant/stage/usr/local/sbin) install -m 0644 /wrkdirs/security/wpa_supplicant/wpa_supplicant-2.5/wpa_supplicant/wpa_supplicant.conf /wrkdirs/security/wpa_supplicant/stage/usr/local/etc/wpa_supplicant.conf.sample (cd /wrkdirs/security/wpa_supplicant/wpa_supplicant-2.5/wpa_supplicant && install -m 0644 README ChangeLog /wrkdirs/security/wpa_supplicant/stage/usr/local/share/doc/wpa_supplicant) ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for wpa_supplicant-2.5_2 file sizes/checksums [6]: . done packing files [6]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for wpa_supplicant-2.5_2 build of security/wpa_supplicant ended at Wed Oct 5 19:54:12 PDT 2016 build time: 00:00:26