=> Building mail/simscan build started at Tue Oct 4 16:10:40 PDT 2016 port directory: /usr/ports/mail/simscan building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: ports@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../05//usr/ports/mail/simscan/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=simscan-1.4.0_7 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ===> The following configuration options are available for simscan-1.4.0_7: ATTACH=off: Turn On Attachment Scanning (required CLAMAV) CLAMAV=on: Support for ClamAV Virus Scanning DOCS=on: Build and/or install documentation DOMAIN=off: Turn On Per Domain Based Checking DROPMSG=off: Drop Message in Case of Virus Found DSPAM=off: Turn on DSPAM scanning HEADERS=off: Add a Received Line With Versions of Scanners PASSTHRU=off: Pass Spam Thru, Do Not Reject (required SPAMD) RIPMIME=on: Ripmime Processing (if Clamav ScanMail disabled) SPAMD=off: Support for SpamAssassin Spam Filtering USER=off: Turn On Per User SpamAssassin (required SPAMD) ===> Use 'make config' to modify these settings ---End OPTIONS List--- --CONFIGURE_ARGS-- --enable-clamavdb-path=/var/db/clamav --enable-qmaildir=/var/qmail --enable-spamc-user=n --enable-workdir=/var/qmail/simscan --enable-user=nobody --enable-qmail-queue=/var/qmail/bin/qmail-queue --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- XDG_DATA_HOME=/wrkdirs/mail/simscan XDG_CONFIG_HOME=/wrkdirs/mail/simscan HOME=/wrkdirs/mail/simscan TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/mail/simscan XDG_CONFIG_HOME=/wrkdirs/mail/simscan HOME=/wrkdirs/mail/simscan TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- QMAIL_PREFIX=/var/qmail SIMSCAN_DIR=simscan OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/simscan" EXAMPLESDIR="share/examples/simscan" DATADIR="share/simscan" WWWDIR="www/simscan" ETCDIR="etc/simscan" --End PLIST_SUB-- --SUB_LIST-- QMAIL_PREFIX=/var/qmail SIMSCAN_DIR=simscan PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/simscan DOCSDIR=/usr/local/share/doc/simscan EXAMPLESDIR=/usr/local/share/examples/simscan WWWDIR=/usr/local/www/simscan ETCDIR=/usr/local/etc/simscan --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== ===> NOTICE: The simscan port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port =========================================================================== =================================================== ===> simscan-1.4.0_7 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> simscan-1.4.0_7 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of simscan-1.4.0_7 =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The simscan port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> Fetching all distfiles required by simscan-1.4.0_7 for building =========================================================================== =================================================== ===> NOTICE: The simscan port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> Fetching all distfiles required by simscan-1.4.0_7 for building => SHA256 Checksum OK for simscan-1.4.0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The simscan port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> Fetching all distfiles required by simscan-1.4.0_7 for building ===> Extracting for simscan-1.4.0_7 => SHA256 Checksum OK for simscan-1.4.0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for simscan-1.4.0_7 ===> Applying ports patches for simscan-1.4.0_7 =========================================================================== =================================================== ===> simscan-1.4.0_7 depends on executable: clamdscan - not found ===> Installing existing package /packages/All/clamav-0.99.2_2.txz Installing clamav-0.99.2_2... `-- Installing libxml2-2.9.4... `-- Extracting libxml2-2.9.4: .......... done `-- Installing unzoo-4.4_2... `-- Extracting unzoo-4.4_2: .. done `-- Installing arc-5.21p... `-- Extracting arc-5.21p: ....... done `-- Installing libltdl-2.4.6... `-- Extracting libltdl-2.4.6: .......... done `-- Installing lha-1.14i_6... `-- Extracting lha-1.14i_6: .. done `-- Installing pcre-8.39... `-- Extracting pcre-8.39: .......... done `-- Installing arj-3.10.22_4... `-- Extracting arj-3.10.22_4: .......... done `-- Installing curl-7.50.3... | `-- Installing libressl-2.4.3... | `-- Extracting libressl-2.4.3: .......... done | `-- Installing ca_root_nss-3.27... | `-- Extracting ca_root_nss-3.27: ....... done | `-- Installing krb5-1.14.4... | | `-- Installing pkgconf-1.0.1... | | `-- Extracting pkgconf-1.0.1: .......... done | | `-- Installing gettext-runtime-0.19.8.1... | | `-- Installing indexinfo-0.2.5... | | `-- Extracting indexinfo-0.2.5: .... done | | `-- Extracting gettext-runtime-0.19.8.1: .......... done | `-- Extracting krb5-1.14.4: .......... done `-- Extracting curl-7.50.3: .......... done `-- Installing json-c-0.12_2... `-- Extracting json-c-0.12_2: .......... done `-- Installing ncurses-6.0_5... `-- Extracting ncurses-6.0_5: .......... done ===> Creating groups. Creating group 'clamav' with gid '106'. Using existing group 'mail'. ===> Creating users Creating user 'clamav' with uid '106'. Adding user 'clamav' to group 'mail'. Extracting clamav-0.99.2_2: .......... done Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> simscan-1.4.0_7 depends on executable: clamdscan - found ===> Returning to build of simscan-1.4.0_7 ===> simscan-1.4.0_7 depends on executable: ripmime - not found ===> Installing existing package /packages/All/ripmime-1.4.0.10.txz Installing ripmime-1.4.0.10... Extracting ripmime-1.4.0.10: .. done Message from ripmime-1.4.0.10: You have installed RipMIME, a utility to extract attachments from MIME-encoded email messages. If you have an MIME encoded archive (say from sendmail's output) called recvmail001.mime and you wish to unpack it to a directory (which already exists) called "/var/tmp/unpack", then you would type: ripmime -i recvmail001.mime -d /var/tmp/unpack ===> simscan-1.4.0_7 depends on executable: ripmime - found ===> Returning to build of simscan-1.4.0_7 ===> simscan-1.4.0_7 depends on file: /var/qmail/bin/qmail-send - not found ===> Installing existing package /packages/All/netqmail-1.06_3.txz Installing netqmail-1.06_3... ===> Creating groups. Creating group 'qmail' with gid '82'. Creating group 'qnofiles' with gid '81'. ===> Creating users Creating user 'alias' with uid '81'. Creating user 'qmaild' with uid '82'. Creating user 'qmaill' with uid '83'. Creating user 'qmailp' with uid '84'. Creating user 'qmailq' with uid '85'. Creating user 'qmailr' with uid '86'. Creating user 'qmails' with uid '87'. Extracting netqmail-1.06_3: .......... done A /usr/local/etc/rc.d/qmailsmtpd and a /usr/local/etc/rc.d/qmailsend symlink were created. Your hostname is pkgbox64.dragonflybsd.org. Your host's fully qualified name in DNS is pkgbox64.dragonflybsd.org. Putting pkgbox64.dragonflybsd.org into control/me... Putting dragonflybsd.org into control/defaultdomain... Putting dragonflybsd.org into control/plusdomain... Checking local IP addresses: 0.0.0.0: PTR lookup failed. I assume this address has no DNS name. 10.0.0.24: PTR lookup failed. I assume this address has no DNS name. 10.0.200.5: PTR lookup failed. I assume this address has no DNS name. 127.0.0.1: Adding localhost.dragonflybsd.org to control/locals... 199.233.90.70: Adding pkgbox64.dragonflybsd.org to control/locals... If there are any other domain names that point to you, you will have to add them to /var/qmail/control/locals. You don't have to worry about aliases, i.e., domains with CNAME records. Copying /var/qmail/control/locals to /var/qmail/control/rcpthosts... Now qmail will refuse to accept SMTP messages except to those hosts. Make sure to change rcpthosts if you add hosts to locals or virtualdomains! Message from netqmail-1.06_3: ATTENTION: You can enable qmail as your default mailer executing: > /var/qmail/scripts/enable-qmail ===> simscan-1.4.0_7 depends on file: /var/qmail/bin/qmail-send - found ===> Returning to build of simscan-1.4.0_7 =========================================================================== =================================================== =========================================================================== =================================================== ===> Configuring for simscan-1.4.0_7 =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~= You may also use the following build options: QMAIL_PREFIX Base qmail directory. Default is /var/qmail WORKDIR Directory to unpack emails. Default is /var/qmail/simscan QMAIL_QUEUE Define full path and name of the qmail-queue program Incoming mail is passed to this program after being scanned by SimScan. Default is /var/qmail/bin/qmail-queue SPAMC_ARGS Define the arguments to pass to spamc. Be sure to place quotes around the options you define SPAM_HITS Reject spam only above this hit level Default is 10.0. Useful without PASSTHRU option QUARANTINE_DIR Directory to keep spam and/or infected emails Default is disabled =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~= configure: loading site script /usr/ports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... (cached) /usr/bin/awk checking whether make sets $(MAKE)... yes checking build system type... x86_64-portbld-dragonfly4.7 checking host system type... x86_64-portbld-dragonfly4.7 checking for style of include used by make... GNU checking for gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking dependency style of cc... none checking for strsep... (cached) yes checking for gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ANSI C... (cached) none needed checking dependency style of cc... (cached) none checking whether the nobody user exists... yes checking whether we can locate the clamdscan program... yes checking whether we can locate the qmail directory... yes checking setting the work directory... done checking setting the control directory... done checking whether we can locate the qmail-queue program... yes checking enable the regex scanner... no checking whether system has nproc ulimit... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands Current settings --------------------------------------- user = nobody qmail directory = /var/qmail work directory = /var/qmail/simscan control directory = /var/qmail/control qmail queue program = /var/qmail/bin/qmail-queue clamdscan program = /usr/local/bin/clamdscan clamav scan = ON trophie scanning = OFF attachement scan = OFF ripmime program = OFF custom smtp reject = OFF drop message = OFF regex scanner = OFF quarantine processing = OFF domain based checking = OFF add received header = OFF spam scanning = OFF dspam scanning = OFF =========================================================================== =================================================== ===> Building for simscan-1.4.0_7 --- ./aclocal.m4 --- cd . && /bin/sh /wrkdirs/mail/simscan/simscan-1.4.0/missing --run aclocal-1.6 /wrkdirs/mail/simscan/simscan-1.4.0/missing: aclocal-1.6: not found WARNING: `aclocal-1.6' is missing on your system. You should only need it if you modified `acinclude.m4' or `configure.in'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. --- ./configure --- --- ./config.h.in --- cd . && /bin/sh /wrkdirs/mail/simscan/simscan-1.4.0/missing --run autoheader --- ./configure --- cd . && /bin/sh /wrkdirs/mail/simscan/simscan-1.4.0/missing --run autoconf /wrkdirs/mail/simscan/simscan-1.4.0/missing: autoconf: not found --- ./config.h.in --- /wrkdirs/mail/simscan/simscan-1.4.0/missing: autoheader: not found --- ./configure --- WARNING: `autoconf' is missing on your system. You should only need it if you modified `configure.in'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. --- ./config.h.in --- WARNING: `autoheader' is missing on your system. You should only need it if you modified `acconfig.h' or `configure.in'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. touch ./config.h.in --- all --- /usr/bin/make all-recursive --- all-recursive --- Making all in cdb --- compile --- --- load --- --- systype --- --- compile --- ( cat warn-auto.sh; echo exec "`head -1 conf-cc`" '-c ${1+"$@"}' ) > compile --- load --- ( cat warn-auto.sh; echo 'main="$1"; shift'; echo exec "`head -1 conf-ld`" '-o "$main" "$main".o ${1+"$@"}' ) > load --- systype --- ( cat warn-auto.sh; echo CC=\'`head -1 conf-cc`\'; echo LD=\'`head -1 conf-ld`\'; cat find-systype.sh; ) | sh > systype --- compile --- chmod 755 compile --- alloc.o --- --- buffer.o --- --- buffer_0.o --- --- alloc.o --- ./compile alloc.c --- buffer.o --- ./compile buffer.c --- buffer_0.o --- ./compile buffer_0.c --- load --- chmod 755 load --- buffer_1.o --- ./compile buffer_1.c --- buffer_1s.o --- ./compile buffer_1s.c --- alloc.o --- alloc.c:3:14: warning: conflicting types for built-in function 'malloc' extern char *malloc(); ^ --- buffer_2.o --- ./compile buffer_2.c --- buffer_copy.o --- ./compile buffer_copy.c --- buffer_get.o --- ./compile buffer_get.c --- buffer_put.o --- --- byte_copy.o --- --- buffer_put.o --- ./compile buffer_put.c --- byte_copy.o --- ./compile byte_copy.c --- byte_cr.o --- ./compile byte_cr.c --- byte_diff.o --- --- error.o --- --- byte_diff.o --- ./compile byte_diff.c --- error.o --- ./compile error.c --- error_str.o --- --- fmt_ulong.o --- ./compile fmt_ulong.c --- error_str.o --- ./compile error_str.c --- open_read.o --- ./compile open_read.c --- open_trunc.o --- ./compile open_trunc.c --- scan_ulong.o --- ./compile scan_ulong.c --- seek_cur.o --- ./compile seek_cur.c --- seek_set.o --- ./compile seek_set.c --- str_len.o --- ./compile str_len.c --- strerr_die.o --- ./compile strerr_die.c --- strerr_sys.o --- ./compile strerr_sys.c --- uint32.h --- ( ( ./compile tryulong32.c && ./load tryulong32 && ./tryulong32 ) >/dev/null 2>&1 && cat uint32.h2 || cat uint32.h1 ) > uint32.h --- makelib --- ( cat warn-auto.sh; echo 'main="$1"; shift'; echo 'rm -f "$main"'; echo 'ar cr "$main" ${1+"$@"}'; case "`cat systype`" in sunos-5.*) ;; unix_sv*) ;; irix64-*) ;; irix-*) ;; dgux-*) ;; hp-ux-*) ;; sco*) ;; *) echo 'ranlib "$main"' ;; esac ) > makelib chmod 755 makelib --- alloc.a --- ./makelib alloc.a alloc.o --- unix.a --- ./makelib unix.a error.o open_read.o open_trunc.o error_str.o seek_set.o seek_cur.o --- buffer.a --- ./makelib buffer.a strerr_sys.o buffer.o buffer_put.o buffer_2.o strerr_die.o buffer_get.o buffer_copy.o buffer_1.o buffer_0.o buffer_1s.o --- uint32.h --- rm -f tryulong32.o tryulong32 --- cdb_unpack.o --- --- cdb_seek.o --- --- cdb.o --- --- cdb_hash.o --- --- cdb_make.o --- --- cdb_seek.o --- ./compile cdb_seek.c --- cdb.o --- ./compile cdb.c --- cdb_hash.o --- ./compile cdb_hash.c --- cdb_unpack.o --- ./compile cdb_unpack.c --- cdb_make.o --- ./compile cdb_make.c --- cdb_seek.o --- cdb_seek.c: In function 'cdb_bread': cdb_seek.c:18:11: warning: implicit declaration of function 'read' [-Wimplicit-function-declaration] r = read(fd,buf,len); ^ cdb_seek.c: In function 'cdb_seek': cdb_seek.c:66:5: warning: implicit declaration of function 'printf' [-Wimplicit-function-declaration] printf("cdb_seek error 1\n"); ^ cdb_seek.c:66:5: warning: incompatible implicit declaration of built-in function 'printf' cdb_seek.c:66:5: note: include '' or provide a declaration of 'printf' cdb_seek.c:71:5: warning: incompatible implicit declaration of built-in function 'printf' printf("cdb_seek error 2\n"); ^ cdb_seek.c:71:5: note: include '' or provide a declaration of 'printf' cdb_seek.c:75:9: warning: implicit declaration of function 'cdb_unpack' [-Wimplicit-function-declaration] pos = cdb_unpack(packbuf); ^ cdb_seek.c:83:7: warning: incompatible implicit declaration of built-in function 'printf' printf("cdb_seek error 3\n"); ^ cdb_seek.c:83:7: note: include '' or provide a declaration of 'printf' cdb_seek.c:87:7: warning: incompatible implicit declaration of built-in function 'printf' printf("cdb_seek error 4\n"); ^ cdb_seek.c:87:7: note: include '' or provide a declaration of 'printf' cdb_seek.c:94:9: warning: incompatible implicit declaration of built-in function 'printf' printf("cdb_seek error 5\n"); ^ cdb_seek.c:94:9: note: include '' or provide a declaration of 'printf' cdb_seek.c:98:9: warning: incompatible implicit declaration of built-in function 'printf' printf("cdb_seek error 6\n"); ^ cdb_seek.c:98:9: note: include '' or provide a declaration of 'printf' cdb_seek.c:104:13: warning: incompatible implicit declaration of built-in function 'printf' printf("cdb_seek error 7\n"); ^ cdb_seek.c:104:13: note: include '' or provide a declaration of 'printf' --- uint32_pack.o --- ./compile uint32_pack.c --- uint32_unpack.o --- ./compile uint32_unpack.c --- byte.a --- ./makelib byte.a byte_copy.o byte_cr.o str_len.o fmt_ulong.o uint32_unpack.o byte_diff.o uint32_pack.o scan_ulong.o --- cdb.a --- ./makelib cdb.a cdb.o cdb_hash.o cdb_make.o cdb_unpack.o cdb_seek.o --- ./Makefile.in --- --- simscan.o --- --- simscanmk.o --- --- ./Makefile.in --- cd . && /bin/sh /wrkdirs/mail/simscan/simscan-1.4.0/missing --run automake-1.6 --foreign Makefile --- simscanmk.o --- cc -DHAVE_CONFIG_H -I. -I. -I. -pipe -O2 -fno-strict-aliasing -Wall -c `test -f 'simscanmk.c' || echo './'`simscanmk.c --- simscan.o --- cc -DHAVE_CONFIG_H -I. -I. -I. -pipe -O2 -fno-strict-aliasing -Wall -c `test -f 'simscan.c' || echo './'`simscan.c --- ./Makefile.in --- /wrkdirs/mail/simscan/simscan-1.4.0/missing: automake-1.6: not found WARNING: `automake-1.6' is missing on your system. You should only need it if you modified `Makefile.am', `acinclude.m4' or `configure.in'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. --- Makefile --- --- simscan.o --- simscan.c: In function 'main': simscan.c:767:7: warning: missing sentinel in function call [-Wformat=] execl(qmail_queue, qmail_queue, 0); ^ --- Makefile --- cd . && /bin/sh ./config.status Makefile --- simscanmk --- cc -pipe -O2 -fno-strict-aliasing -Wall -o simscanmk simscanmk.o cdb/cdb.a cdb/buffer.a cdb/unix.a cdb/byte.a cdb/alloc.a --- Makefile --- config.status: creating Makefile --- simscan --- cc -pipe -O2 -fno-strict-aliasing -Wall -o simscan simscan.o cdb/cdb.a cdb/buffer.a cdb/unix.a cdb/byte.a cdb/alloc.a =========================================================================== =================================================== =========================================================================== =================================================== ===> Staging for simscan-1.4.0_7 /bin/mkdir -p /wrkdirs/mail/simscan/stage/var/qmail/bin ===> Generating temporary packing list ===> Creating groups. ===> Creating users Making install in cdb /usr/bin/install -c simscan /wrkdirs/mail/simscan/stage/var/qmail/bin/simscan /usr/bin/install -c simscanmk /wrkdirs/mail/simscan/stage/var/qmail/bin/simscanmk /usr/bin/install -c -m 750 -d /wrkdirs/mail/simscan/stage/var/qmail/simscan strip /wrkdirs/mail/simscan/stage/var/qmail/bin/simscan strip /wrkdirs/mail/simscan/stage/var/qmail/bin/simscanmk /bin/mkdir -p /wrkdirs/mail/simscan/stage/usr/local/share/doc/simscan install -m 0644 /wrkdirs/mail/simscan/simscan-1.4.0/AUTHORS /wrkdirs/mail/simscan/stage/usr/local/share/doc/simscan install -m 0644 /wrkdirs/mail/simscan/simscan-1.4.0/ChangeLog /wrkdirs/mail/simscan/stage/usr/local/share/doc/simscan install -m 0644 /wrkdirs/mail/simscan/simscan-1.4.0/README /wrkdirs/mail/simscan/stage/usr/local/share/doc/simscan install -m 0644 /wrkdirs/mail/simscan/simscan-1.4.0/TODO /wrkdirs/mail/simscan/stage/usr/local/share/doc/simscan ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for simscan-1.4.0_7 file sizes/checksums [6]: . done packing files [6]: . done packing directories [3]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for simscan-1.4.0_7 build of mail/simscan ended at Tue Oct 4 16:10:56 PDT 2016 build time: 00:00:16