=> Building www/seahub build started at Wed Oct 5 18:02:53 PDT 2016 port directory: /usr/ports/www/seahub building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: ultima1252@gmail.com ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../02//usr/ports/www/seahub/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=seahub-6.0.0 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ===> The following configuration options are available for seahub-6.0.0: NLS=on: Native Language Support SEAFDAV=on: Enable Seafile WsgiDav-based support SEAFOBJ=on: Enable Seafile file object modeling support ===> Use 'make config' to modify these settings ---End OPTIONS List--- --CONFIGURE_ARGS-- --with-seafdav --with-seafobj --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- PYTHON="/usr/local/bin/python2.7" XDG_DATA_HOME=/wrkdirs/www/seahub XDG_CONFIG_HOME=/wrkdirs/www/seahub HOME=/wrkdirs/www/seahub TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/www/seahub XDG_CONFIG_HOME=/wrkdirs/www/seahub HOME=/wrkdirs/www/seahub TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -DLIBICONV_PLUG -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="-DLIBICONV_PLUG" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -DLIBICONV_PLUG -O2 -fno-strict-aliasing -DLIBICONV_PLUG" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- USERS=seafile GROUPS=seafile SEAFILE_SERVER=www/haiwen/seafile-server SEAHUBDIR=www/haiwen/seafile-server/seahub HAIWENDIR=www/haiwen SITEPACKAGEDIR=www/haiwen/seafile-server/seahub/thirdpart NLS="" NO_NLS="@comment " SEAFDAV="" NO_SEAFDAV="@comment " SEAFOBJ="" NO_SEAFOBJ="@comment " PYTHON_INCLUDEDIR=include/python2.7 PYTHON_LIBDIR=lib/python2.7 PYTHON_PLATFORM=dragonfly4 PYTHON_SITELIBDIR=lib/python2.7/site-packages PYTHON_VER=2.7 PYTHON_VERSION=python2.7 OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/seahub" EXAMPLESDIR="share/examples/seahub" DATADIR="share/seahub" WWWDIR="www/seahub" ETCDIR="etc/seahub" --End PLIST_SUB-- --SUB_LIST-- USERS=seafile GROUPS=seafile SEAFILE_SERVER=www/haiwen/seafile-server HAIWENDIR=www/haiwen PYTHON=python2.7 NLS="" NO_NLS="@comment " SEAFDAV="" NO_SEAFDAV="@comment " SEAFOBJ="" NO_SEAFOBJ="@comment " PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/seahub DOCSDIR=/usr/local/share/doc/seahub EXAMPLESDIR=/usr/local/share/examples/seahub WWWDIR=/usr/local/www/seahub ETCDIR=/usr/local/etc/seahub --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== ===> License APACHE20 accepted by the user =========================================================================== =================================================== ===> seahub-6.0.0 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> seahub-6.0.0 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of seahub-6.0.0 =========================================================================== =================================================== =========================================================================== =================================================== ===> License APACHE20 accepted by the user ===> Fetching all distfiles required by seahub-6.0.0 for building =========================================================================== =================================================== ===> License APACHE20 accepted by the user ===> Fetching all distfiles required by seahub-6.0.0 for building => SHA256 Checksum OK for haiwen-seahub-v6.0.0-pro_GH0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> License APACHE20 accepted by the user ===> Fetching all distfiles required by seahub-6.0.0 for building ===> Extracting for seahub-6.0.0 => SHA256 Checksum OK for haiwen-seahub-v6.0.0-pro_GH0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for seahub-6.0.0 echo "/wrkdirs/www/seahub/seahub-6.0.0-pro..." /wrkdirs/www/seahub/seahub-6.0.0-pro... /bin/cp /usr/ports/www/seahub/files/runtime_seahub.conf /wrkdirs/www/seahub/seahub-6.0.0-pro/runtime/seahub.conf /usr/bin/sed -i.bak -Ee "s|SEAFILE_VERSION = '[0-9]+\.[0-9]+\.[0-9]+'|SEAFILE_VERSION = '`/bin/cat /usr/ports/www/seahub/../../net-mgmt/seafile/Makefile | /usr/bin/grep -Eom1 '[0-9]+\.[0-9]+\.[0-9]+'`'|" /wrkdirs/www/seahub/seahub-6.0.0-pro/seahub/settings.py /usr/bin/sed -i.bak -e 's|##FIX_WWWDIR##|/usr/local/www/haiwen|' /wrkdirs/www/seahub/seahub-6.0.0-pro/*.template /usr/bin/sed -i.bak -e 's|##FIX_SEALIB##|/usr/local/www/haiwen/seafile-server/seafile/lib|' /wrkdirs/www/seahub/seahub-6.0.0-pro/*.template /usr/bin/sed -i.bak -e 's|##FIX_SITEPACKAGEDIR##|/usr/local/www/haiwen/seafile-server/seahub/thirdpart|' /wrkdirs/www/seahub/seahub-6.0.0-pro/*.template /usr/bin/sed -i.bak -e 's|##PYTHON_VERSION##|python2.7|g' /wrkdirs/www/seahub/seahub-6.0.0-pro/*.template /usr/bin/sed -i.bak -e 's|##FIX_LOCALBASE##|/usr/local|' /wrkdirs/www/seahub/seahub-6.0.0-pro/*.template /usr/bin/find /wrkdirs/www/seahub/seahub-6.0.0-pro -name "*.bak" -exec /bin/rm -f {} \; /usr/bin/find /wrkdirs/www/seahub/seahub-6.0.0-pro -name "*.orig" -exec /bin/rm -f {} \; (cd /wrkdirs/www/seahub/seahub-6.0.0-pro; (for file in run-seahub.sh.template send_user_notifications.sh.template setenv.sh.template; do /bin/cp $file ${file%%.template}; done)) /bin/rm -f /wrkdirs/www/seahub/seahub-6.0.0-pro/.gitignore =========================================================================== =================================================== ===> seahub-6.0.0 depends on file: /usr/local/bin/python2.7 - not found ===> Installing existing package /packages/All/python27-2.7.12.txz Installing python27-2.7.12... `-- Installing expat-2.2.0... `-- Extracting expat-2.2.0: .......... done `-- Installing readline-6.3.8... | `-- Installing indexinfo-0.2.5... | `-- Extracting indexinfo-0.2.5: .... done | `-- Installing ncurses-6.0_5... | `-- Extracting ncurses-6.0_5: .......... done `-- Extracting readline-6.3.8: .......... done `-- Installing libffi-3.2.1... `-- Extracting libffi-3.2.1: .......... done `-- Installing libressl-2.4.3... `-- Extracting libressl-2.4.3: .......... done `-- Installing gettext-runtime-0.19.8.1... `-- Extracting gettext-runtime-0.19.8.1: .......... done Extracting python27-2.7.12: .......... done Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from python27-2.7.12: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== ===> seahub-6.0.0 depends on file: /usr/local/bin/python2.7 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on executable: msgfmt - not found ===> Installing existing package /packages/All/gettext-tools-0.19.8.1.txz Installing gettext-tools-0.19.8.1... Extracting gettext-tools-0.19.8.1: .......... done ===> seahub-6.0.0 depends on executable: msgfmt - found ===> Returning to build of seahub-6.0.0 =========================================================================== =================================================== ===> seahub-6.0.0 depends on shared library: libintl.so - found (/usr/local/lib/libintl.so) =========================================================================== =================================================== ===> Configuring for seahub-6.0.0 =========================================================================== =================================================== =========================================================================== =================================================== ===> seahub-6.0.0 depends on executable: bash - not found ===> Installing existing package /packages/All/bash-4.3.46_1.txz Installing bash-4.3.46_1... Extracting bash-4.3.46_1: .......... done ===> seahub-6.0.0 depends on executable: bash - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on file: /usr/local/www/haiwen/seafile-server/seafile/bin/seaf-server - not found ===> Installing existing package /packages/All/seafile-6.0.0.txz Installing seafile-6.0.0... `-- Installing libarchive-3.2.1,1... | `-- Installing liblz4-131... | `-- Extracting liblz4-131: .......... done | `-- Installing lzo2-2.09... | `-- Extracting lzo2-2.09: .......... done `-- Extracting libarchive-3.2.1,1: .......... done `-- Installing py27-urllib3-1.18... | `-- Installing py27-setuptools27-23.1.0... | `-- Extracting py27-setuptools27-23.1.0: .......... done | `-- Installing py27-openssl-16.0.0... | | `-- Installing py27-six-1.10.0... | | `-- Extracting py27-six-1.10.0: .......... done | | `-- Installing py27-cryptography-1.4... | | `-- Installing py27-enum34-1.1.6... | | `-- Extracting py27-enum34-1.1.6: .......... done | | `-- Installing py27-cffi-1.7.0... | | | `-- Installing py27-pycparser-2.10... | | | `-- Extracting py27-pycparser-2.10: .......... done | | `-- Extracting py27-cffi-1.7.0: .......... done | | `-- Installing py27-pyasn1-0.1.9... | | `-- Extracting py27-pyasn1-0.1.9: .......... done | | `-- Installing py27-idna-2.0... | | `-- Extracting py27-idna-2.0: .......... done | | `-- Installing py27-ipaddress-1.0.16... | | `-- Extracting py27-ipaddress-1.0.16: .......... done | | `-- Extracting py27-cryptography-1.4: .......... done | `-- Extracting py27-openssl-16.0.0: .......... done | `-- Installing py27-pysocks-1.5.7... | `-- Extracting py27-pysocks-1.5.7: .......... done | `-- Installing py27-certifi-2016.2.28... | `-- Extracting py27-certifi-2016.2.28: .......... done `-- Extracting py27-urllib3-1.18: .......... done `-- Installing sqlite3-3.14.1_1... `-- Extracting sqlite3-3.14.1_1: .......... done `-- Installing py27-sqlite3-2.7.12_7... `-- Extracting py27-sqlite3-2.7.12_7: ........ done `-- Installing curl-7.50.3... | `-- Installing ca_root_nss-3.27... | `-- Extracting ca_root_nss-3.27: ....... done | `-- Installing krb5-1.14.4... | | `-- Installing pkgconf-1.0.1... | | `-- Extracting pkgconf-1.0.1: .......... done | `-- Extracting krb5-1.14.4: .......... done `-- Extracting curl-7.50.3: .......... done `-- Installing libinotify-20140622... `-- Extracting libinotify-20140622: ...... done `-- Installing libevhtp-1.2.11_2... | `-- Installing libevent2-2.0.22_1... | `-- Extracting libevent2-2.0.22_1: .......... done `-- Extracting libevhtp-1.2.11_2: .......... done `-- Installing e2fsprogs-libuuid-1.43.3_1... `-- Extracting e2fsprogs-libuuid-1.43.3_1: .......... done `-- Installing libzdb-3.1_1... | `-- Installing postgresql93-client-9.3.14_1... | | `-- Installing perl5-5.20.3_15... | | `-- Extracting perl5-5.20.3_15: .......... done | `-- Extracting postgresql93-client-9.3.14_1: .......... done | `-- Installing mysql56-client-5.6.33... | | `-- Installing libedit-3.1.20150325_2,1... | | `-- Extracting libedit-3.1.20150325_2,1: .......... done | `-- Extracting mysql56-client-5.6.33: .......... done `-- Extracting libzdb-3.1_1: .......... done `-- Installing jansson-2.9... `-- Extracting jansson-2.9: .......... done `-- Installing libsearpc-3.0.7_1... | `-- Installing glib-2.46.2_3... | | `-- Installing libiconv-1.14_9... | | `-- Extracting libiconv-1.14_9: .......... done | | `-- Installing pcre-8.39... | | `-- Extracting pcre-8.39: .......... done | `-- Extracting glib-2.46.2_3: .......... done No schema files found: doing nothing. | `-- Installing python2-2_3... | `-- Extracting python2-2_3: ...... done ===> Creating groups. Creating group 'seafile' with gid '900'. ===> Creating users Creating user 'seafile' with uid '900'. `-- Extracting libsearpc-3.0.7_1: .......... done `-- Installing ccnet-6.0.0... | `-- Installing openldap-client-2.4.44... | `-- Extracting openldap-client-2.4.44: .......... done ===> Creating groups. Using existing group 'seafile'. ===> Creating users Using existing user 'seafile'. `-- Extracting ccnet-6.0.0: .......... done ===> Creating groups. Using existing group 'seafile'. ===> Creating users Using existing user 'seafile'. Extracting seafile-6.0.0: .......... done Message from py27-urllib3-1.18: Be careful, support of IPv6 is broken with PySocks 1.5.7. Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from libinotify-20140622: ============================================================================ You might want to consider increasing the kern.maxfiles tunable if you plan to use this library for applications that need to monitor activity of a lot of files. For a typical desktop, add the following line to /boot/loader.conf, then reboot the system: kern.maxfiles="25000" ============================================================================= Message from perl5-5.20.3_15: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Message from postgresql93-client-9.3.14_1: The PostgreSQL port has a collection of "side orders": postgresql-docs For all of the html documentation p5-Pg A perl5 API for client access to PostgreSQL databases. postgresql-tcltk If you want tcl/tk client support. postgresql-jdbc For Java JDBC support. postgresql-odbc For client access from unix applications using ODBC as access method. Not needed to access unix PostgreSQL servers from Win32 using ODBC. See below. ruby-postgres, py-PyGreSQL For client access to PostgreSQL databases using the ruby & python languages. postgresql-plperl, postgresql-pltcl & postgresql-plruby For using perl5, tcl & ruby as procedural languages. postgresql-contrib Lots of contributed utilities, postgresql functions and datatypes. There you find pg_standby, pgcrypto and many other cool things. etc... Message from mysql56-client-5.6.33: * * * * * * * * * * * * * * * * * * * * * * * * Please be aware the database client is vulnerable to CVE-2015-3152 - SSL Downgrade aka "BACKRONYM". You may find more information at the following URL: http://www.vuxml.org/freebsd/36bd352d-299b-11e5-86ff-14dae9d210b8.html Although this database client is not listed as "affected", it is vulnerable and will not be receiving a patch. Please take note of this when deploying this software. * * * * * * * * * * * * * * * * * * * * * * * * Message from libzdb-3.1_1: ===> NOTICE: The libzdb port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from openldap-client-2.4.44: ************************************************************ The OpenLDAP client package has been successfully installed. Edit /usr/local/etc/openldap/ldap.conf to change the system-wide client defaults. Try `man ldap.conf' and visit the OpenLDAP FAQ-O-Matic at http://www.OpenLDAP.org/faq/index.cgi?file=3 for more information. ************************************************************ Message from seafile-6.0.0: For an existing config, or creating a new one, fix the UID/GID. Do not change /usr/local/www/haiwen/seafile-server unless your front end is using the seafile UID/GID as well. chown -R seafile:seafile /usr/local/www/haiwen/conf \ /usr/local/www/haiwen/ccnet /usr/local/www/haiwen/seafile-data \ /usr/local/www/haiwen/pids /usr/local/www/haiwen/logs Don't forget to run update scripts after every minor and major update located in /usr/local/www/haiwen/seafile-server/upgrade Patch updates (5.1.x) don't require these scripts, however do required a restarted. ===> seahub-6.0.0 depends on file: /usr/local/www/haiwen/seafile-server/seafile/bin/seaf-server - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-django18>=0 - not found ===> Installing existing package /packages/All/py27-django18-1.8.15.txz Installing py27-django18-1.8.15... Extracting py27-django18-1.8.15: .......... done ===> seahub-6.0.0 depends on package: py27-django18>=0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-pytz>=0 - not found ===> Installing existing package /packages/All/py27-pytz-2016.6.1,1.txz Installing py27-pytz-2016.6.1,1... Extracting py27-pytz-2016.6.1,1: .......... done ===> seahub-6.0.0 depends on package: py27-pytz>=0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-django-statici18n>=0 - not found ===> Installing existing package /packages/All/py27-django-statici18n-1.2.1.txz Installing py27-django-statici18n-1.2.1... `-- Installing py27-django-appconf-1.0.2... `-- Extracting py27-django-appconf-1.0.2: .......... done Extracting py27-django-statici18n-1.2.1: .......... done ===> seahub-6.0.0 depends on package: py27-django-statici18n>=0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-djangorestframework>=0 - not found ===> Installing existing package /packages/All/py27-djangorestframework-3.3.3.txz Installing py27-djangorestframework-3.3.3... Extracting py27-djangorestframework-3.3.3: .......... done ===> seahub-6.0.0 depends on package: py27-djangorestframework>=0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-django_compressor>=0 - not found ===> Installing existing package /packages/All/py27-django_compressor-2.0_1.txz Installing py27-django_compressor-2.0_1... `-- Installing py27-rcssmin-1.0.6... `-- Extracting py27-rcssmin-1.0.6: .......... done `-- Installing py27-rjsmin-1.0.12... `-- Extracting py27-rjsmin-1.0.12: .......... done Extracting py27-django_compressor-2.0_1: .......... done ===> seahub-6.0.0 depends on package: py27-django_compressor>=0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-django-post_office>=0 - not found ===> Installing existing package /packages/All/py27-django-post_office-2.0.8.txz Installing py27-django-post_office-2.0.8... `-- Installing py27-django-jsonfield-1.0.3... `-- Extracting py27-django-jsonfield-1.0.3: .......... done Extracting py27-django-post_office-2.0.8: .......... done ===> seahub-6.0.0 depends on package: py27-django-post_office>=0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-django-constance>=0 - not found ===> Installing existing package /packages/All/py27-django-constance-1.2.1.txz Installing py27-django-constance-1.2.1... `-- Installing py27-redis-2.10.5... `-- Extracting py27-redis-2.10.5: .......... done `-- Installing py27-django-picklefield-0.3.2_1... `-- Extracting py27-django-picklefield-0.3.2_1: .......... done `-- Installing py27-coverage-4.1... `-- Extracting py27-coverage-4.1: .......... done Extracting py27-django-constance-1.2.1: .......... done ===> seahub-6.0.0 depends on package: py27-django-constance>=0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-gunicorn>=0 - not found ===> Installing existing package /packages/All/py27-gunicorn-19.4.5.txz Installing py27-gunicorn-19.4.5... `-- Installing py27-setproctitle-1.1.10... `-- Extracting py27-setproctitle-1.1.10: .......... done Extracting py27-gunicorn-19.4.5: .......... done ===> seahub-6.0.0 depends on package: py27-gunicorn>=0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-flup>=0 - not found ===> Installing existing package /packages/All/py27-flup-1.0.2_2.txz Installing py27-flup-1.0.2_2... Extracting py27-flup-1.0.2_2: .......... done ===> seahub-6.0.0 depends on package: py27-flup>=0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-chardet>=0 - not found ===> Installing existing package /packages/All/py27-chardet-2.3.0_1.txz Installing py27-chardet-2.3.0_1... Extracting py27-chardet-2.3.0_1: .......... done ===> seahub-6.0.0 depends on package: py27-chardet>=0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-dateutil>=0 - not found ===> Installing existing package /packages/All/py27-dateutil-2.5.0.txz Installing py27-dateutil-2.5.0... Extracting py27-dateutil-2.5.0: .......... done ===> seahub-6.0.0 depends on package: py27-dateutil>=0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-six>=0 - found ===> seahub-6.0.0 depends on package: py27-openpyxl>=0 - not found ===> Installing existing package /packages/All/py27-openpyxl-2.3.5.txz Installing py27-openpyxl-2.3.5... `-- Installing py27-et_xmlfile-1.0.1... `-- Extracting py27-et_xmlfile-1.0.1: .......... done `-- Installing py27-jdcal-1.2... `-- Extracting py27-jdcal-1.2: .......... done Extracting py27-openpyxl-2.3.5: .......... done ===> seahub-6.0.0 depends on package: py27-openpyxl>=0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-pillow>=0 - not found ===> Installing existing package /packages/All/py27-pillow-3.1.1_1.txz Installing py27-pillow-3.1.1_1... `-- Installing tk86-8.6.6... | `-- Installing libXft-2.3.2_1... | | `-- Installing xproto-7.0.28... | | `-- Extracting xproto-7.0.28: .......... done | | `-- Installing fontconfig-2.12.1,1... | | `-- Installing freetype2-2.6.3... | | `-- Extracting freetype2-2.6.3: .......... done | | `-- Extracting fontconfig-2.12.1,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | | `-- Installing libXrender-0.9.9... | | `-- Installing renderproto-0.11.1... | | `-- Extracting renderproto-0.11.1: .... done | | `-- Installing libX11-1.6.3,1... | | | `-- Installing kbproto-1.0.7... | | | `-- Extracting kbproto-1.0.7: .......... done | | | `-- Installing libXdmcp-1.1.2... | | | `-- Extracting libXdmcp-1.1.2: ......... done | | | `-- Installing libxcb-1.11.1... | | | `-- Installing libxml2-2.9.4... | | | `-- Extracting libxml2-2.9.4: .......... done | | | `-- Installing libpthread-stubs-0.3_6... | | | `-- Extracting libpthread-stubs-0.3_6: ..... done | | | `-- Installing libXau-1.0.8_3... | | | `-- Extracting libXau-1.0.8_3: .......... done | | | `-- Extracting libxcb-1.11.1: .......... done | | `-- Extracting libX11-1.6.3,1: .......... done | | `-- Extracting libXrender-0.9.9: .......... done | `-- Extracting libXft-2.3.2_1: ......... done | `-- Installing tcl86-8.6.6... | `-- Extracting tcl86-8.6.6: .......... done | `-- Installing libXScrnSaver-1.2.2_3... | | `-- Installing libXext-1.3.3_1,1... | | `-- Installing xextproto-7.3.0... | | `-- Extracting xextproto-7.3.0: .......... done | | `-- Extracting libXext-1.3.3_1,1: .......... done | | `-- Installing scrnsaverproto-1.2.2... | | `-- Extracting scrnsaverproto-1.2.2: ... done | `-- Extracting libXScrnSaver-1.2.2_3: .......... done `-- Extracting tk86-8.6.6: .......... done `-- Installing py27-tkinter-2.7.12_6... `-- Extracting py27-tkinter-2.7.12_6: ........ done `-- Installing jpeg-turbo-1.4.2... `-- Extracting jpeg-turbo-1.4.2: .......... done `-- Installing webp-0.5.0... | `-- Installing png-1.6.23... | `-- Extracting png-1.6.23: .......... done | `-- Installing giflib-5.1.3... | `-- Extracting giflib-5.1.3: .......... done | `-- Installing tiff-4.0.6_2... | | `-- Installing jbigkit-2.1_1... | | `-- Extracting jbigkit-2.1_1: .......... done | `-- Extracting tiff-4.0.6_2: .......... done `-- Extracting webp-0.5.0: .......... done Extracting py27-pillow-3.1.1_1: .......... done ===> seahub-6.0.0 depends on package: py27-pillow>=0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-MySQLdb>0 - not found ===> Installing existing package /packages/All/py27-MySQLdb-1.2.5.txz Installing py27-MySQLdb-1.2.5... Extracting py27-MySQLdb-1.2.5: .......... done ===> seahub-6.0.0 depends on package: py27-MySQLdb>0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-seafdav>0 - not found ===> Installing existing package /packages/All/py27-seafdav-5.1.6.txz Installing py27-seafdav-5.1.6... ===> Creating groups. Using existing group 'seafile'. ===> Creating users Using existing user 'seafile'. Extracting py27-seafdav-5.1.6: .......... done ===> seahub-6.0.0 depends on package: py27-seafdav>0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on package: py27-seafobj>0 - not found ===> Installing existing package /packages/All/py27-seafobj-5.1.6.txz Installing py27-seafobj-5.1.6... ===> Creating groups. Using existing group 'seafile'. ===> Creating users Using existing user 'seafile'. Extracting py27-seafobj-5.1.6: .......... done ===> seahub-6.0.0 depends on package: py27-seafobj>0 - found ===> Returning to build of seahub-6.0.0 ===> seahub-6.0.0 depends on file: /usr/local/bin/python2.7 - found =========================================================================== =================================================== ===> Staging for seahub-6.0.0 ===> Generating temporary packing list ===> Creating groups. ===> Creating users install /wrkdirs/www/seahub/seahub-6.0.0-pro/runtime/seahub.conf /wrkdirs/www/seahub/stage/usr/local/www/haiwen/seafile-server/runtime/ (cd /wrkdirs/www/seahub/seahub-6.0.0-pro && /bin/sh -c '(/usr/bin/find -d $0 $2 | /usr/bin/cpio -dumpl $1 >/dev/null 2>&1) && /usr/bin/find -d $0 $2 -type d -exec chmod 755 $1/{} \; && /usr/bin/find -d $0 $2 -type f -exec chmod 444 $1/{} \;' -- . /wrkdirs/www/seahub/stage/usr/local/www/haiwen/seafile-server/seahub "! -name Makefile ! -name runtime ! -name seahub.conf ! -name avatars ! -name default-non-register.jpg ! -name default.png ! -name groups") (cd /wrkdirs/www/seahub/seahub-6.0.0-pro/media && /bin/sh -c '(/usr/bin/find -d $0 $2 | /usr/bin/cpio -dumpl $1 >/dev/null 2>&1) && /usr/bin/find -d $0 $2 -type d -exec chmod 755 $1/{} \; && /usr/bin/find -d $0 $2 -type f -exec chmod 444 $1/{} \;' -- ./avatars /wrkdirs/www/seahub/stage/usr/local/www/haiwen/seahub-data) ln -fs ../../../seahub-data/avatars /wrkdirs/www/seahub/stage/usr/local/www/haiwen/seafile-server/seahub/media/avatars ====> Compressing man pages (compress-man) ===> Staging rc.d startup script(s) =========================================================================== =================================================== ===> Building package for seahub-6.0.0 file sizes/checksums [1749]: .......... done packing files [1749]: .......... done packing directories [8]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for seahub-6.0.0 build of www/seahub ended at Wed Oct 5 18:03:55 PDT 2016 build time: 00:01:02