=> Building net/libproxy-gnome build started at Wed Oct 5 05:54:40 PDT 2016 port directory: /usr/ports/net/libproxy-gnome building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: gnome@FreeBSD.org Makefile ident: $MCom: ports/net/libproxy-gnome/Makefile,v 1.1 2011/01/12 13:10:53 kwm Exp $ Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=libproxy-gnome-0.4.12 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ---End OPTIONS List--- --CONFIGURE_ARGS-- --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- PKG_CONFIG=pkgconf XDG_DATA_HOME=/wrkdirs/net/libproxy-gnome XDG_CONFIG_HOME=/wrkdirs/net/libproxy-gnome HOME=/wrkdirs/net/libproxy-gnome TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/net/libproxy-gnome XDG_CONFIG_HOME=/wrkdirs/net/libproxy-gnome HOME=/wrkdirs/net/libproxy-gnome TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- VERSION=0.4.12 CMAKE_BUILD_TYPE="release" GTK2_VERSION="2.10.0" GTK3_VERSION="3.0.0" OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/libproxy" EXAMPLESDIR="share/examples/libproxy" DATADIR="share/libproxy" WWWDIR="www/libproxy" ETCDIR="etc/libproxy" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/libproxy DOCSDIR=/usr/local/share/doc/libproxy EXAMPLESDIR=/usr/local/share/examples/libproxy WWWDIR=/usr/local/www/libproxy ETCDIR=/usr/local/etc/libproxy --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== =========================================================================== =================================================== ===> libproxy-gnome-0.4.12 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> libproxy-gnome-0.4.12 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of libproxy-gnome-0.4.12 =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by libproxy-gnome-0.4.12 for building =========================================================================== =================================================== ===> Fetching all distfiles required by libproxy-gnome-0.4.12 for building => SHA256 Checksum OK for libproxy-libproxy-0.4.12_GH0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by libproxy-gnome-0.4.12 for building ===> Extracting for libproxy-gnome-0.4.12 => SHA256 Checksum OK for libproxy-libproxy-0.4.12_GH0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for libproxy-gnome-0.4.12 ===> Applying ports patches for libproxy-gnome-0.4.12 =========================================================================== =================================================== ===> libproxy-gnome-0.4.12 depends on package: pkgconf>=0.9.10 - not found ===> Installing existing package /packages/All/pkgconf-1.0.1.txz Installing pkgconf-1.0.1... Extracting pkgconf-1.0.1: .......... done ===> libproxy-gnome-0.4.12 depends on package: pkgconf>=0.9.10 - found ===> Returning to build of libproxy-gnome-0.4.12 ===> libproxy-gnome-0.4.12 depends on file: /usr/local/bin/cmake - not found ===> Installing existing package /packages/All/cmake-3.6.2.txz Installing cmake-3.6.2... `-- Installing expat-2.2.0... `-- Extracting expat-2.2.0: .......... done `-- Installing cmake-modules-3.6.2... `-- Extracting cmake-modules-3.6.2: .......... done `-- Installing curl-7.50.3... | `-- Installing libressl-2.4.3... | `-- Extracting libressl-2.4.3: .......... done | `-- Installing ca_root_nss-3.27... | `-- Extracting ca_root_nss-3.27: ....... done | `-- Installing krb5-1.14.4... | | `-- Installing gettext-runtime-0.19.8.1... | | `-- Installing indexinfo-0.2.5... | | `-- Extracting indexinfo-0.2.5: .... done | | `-- Extracting gettext-runtime-0.19.8.1: .......... done | `-- Extracting krb5-1.14.4: .......... done `-- Extracting curl-7.50.3: .......... done `-- Installing libarchive-3.2.1,1... | `-- Installing liblz4-131... | `-- Extracting liblz4-131: .......... done | `-- Installing lzo2-2.09... | `-- Extracting lzo2-2.09: .......... done `-- Extracting libarchive-3.2.1,1: .......... done `-- Installing jsoncpp-1.7.3... `-- Extracting jsoncpp-1.7.3: .......... done `-- Installing ncurses-6.0_5... `-- Extracting ncurses-6.0_5: .......... done Extracting cmake-3.6.2: .......... done Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> libproxy-gnome-0.4.12 depends on file: /usr/local/bin/cmake - found ===> Returning to build of libproxy-gnome-0.4.12 =========================================================================== =================================================== ===> libproxy-gnome-0.4.12 depends on shared library: libproxy.so - not found ===> Installing existing package /packages/All/libproxy-0.4.12.txz Installing libproxy-0.4.12... Extracting libproxy-0.4.12: ........ done ===> libproxy-gnome-0.4.12 depends on shared library: libproxy.so - found (/usr/local/lib/libproxy.so) ===> Returning to build of libproxy-gnome-0.4.12 ===> libproxy-gnome-0.4.12 depends on shared library: libatk-1.0.so - not found ===> Installing existing package /packages/All/atk-2.18.0.txz Installing atk-2.18.0... `-- Installing glib-2.46.2_3... | `-- Installing libiconv-1.14_9... | `-- Extracting libiconv-1.14_9: .......... done | `-- Installing python27-2.7.12... | | `-- Installing readline-6.3.8... | | `-- Extracting readline-6.3.8: .......... done | | `-- Installing libffi-3.2.1... | | `-- Extracting libffi-3.2.1: .......... done | `-- Extracting python27-2.7.12: .......... done | `-- Installing pcre-8.39... | `-- Extracting pcre-8.39: .......... done | `-- Installing perl5-5.20.3_15... | `-- Extracting perl5-5.20.3_15: .......... done `-- Extracting glib-2.46.2_3: .......... done No schema files found: doing nothing. Extracting atk-2.18.0: .......... done Message from python27-2.7.12: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== Message from perl5-5.20.3_15: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. ===> libproxy-gnome-0.4.12 depends on shared library: libatk-1.0.so - found (/usr/local/lib/libatk-1.0.so) ===> Returning to build of libproxy-gnome-0.4.12 ===> libproxy-gnome-0.4.12 depends on shared library: libgconf-2.so - not found ===> Installing existing package /packages/All/gconf2-3.2.6_4.txz Installing gconf2-3.2.6_4... `-- Installing libxml2-2.9.4... `-- Extracting libxml2-2.9.4: .......... done `-- Installing gtk2-2.24.29_2... | `-- Installing hicolor-icon-theme-0.15... | `-- Extracting hicolor-icon-theme-0.15: . done | `-- Installing libXdamage-1.1.4_3... | | `-- Installing libXfixes-5.0.1_3... | | `-- Installing xproto-7.0.28... | | `-- Extracting xproto-7.0.28: .......... done | | `-- Installing fixesproto-5.0... | | `-- Extracting fixesproto-5.0: .... done | | `-- Installing libX11-1.6.3,1... | | | `-- Installing kbproto-1.0.7... | | | `-- Extracting kbproto-1.0.7: .......... done | | | `-- Installing libXdmcp-1.1.2... | | | `-- Extracting libXdmcp-1.1.2: ......... done | | | `-- Installing libxcb-1.11.1... | | | `-- Installing libpthread-stubs-0.3_6... | | | `-- Extracting libpthread-stubs-0.3_6: ..... done | | | `-- Installing libXau-1.0.8_3... | | | `-- Extracting libXau-1.0.8_3: .......... done | | | `-- Extracting libxcb-1.11.1: .......... done | | `-- Extracting libX11-1.6.3,1: .......... done | | `-- Extracting libXfixes-5.0.1_3: .......... done | | `-- Installing damageproto-1.2.1... | | `-- Extracting damageproto-1.2.1: .... done | `-- Extracting libXdamage-1.1.4_3: ...... done | `-- Installing gtk-update-icon-cache-2.24.29... | | `-- Installing pango-1.38.0_1... | | `-- Installing encodings-1.0.4_3,1... | | | `-- Installing font-util-1.3.1... | | | `-- Extracting font-util-1.3.1: .......... done | | `-- Extracting encodings-1.0.4_3,1: .......... done | | `-- Installing fontconfig-2.12.1,1... | | | `-- Installing freetype2-2.6.3... | | | `-- Extracting freetype2-2.6.3: .......... done | | `-- Extracting fontconfig-2.12.1,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: caching, new cache contents: 0 fonts, 2 dirs /usr/local/share/fonts/encodings: caching, new cache contents: 0 fonts, 1 dirs /usr/local/share/fonts/encodings/large: caching, new cache contents: 0 fonts, 0 dirs /usr/local/share/fonts/util: caching, new cache contents: 0 fonts, 0 dirs /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | | `-- Installing libXft-2.3.2_1... | | | `-- Installing libXrender-0.9.9... | | | `-- Installing renderproto-0.11.1... | | | `-- Extracting renderproto-0.11.1: .... done | | | `-- Extracting libXrender-0.9.9: .......... done | | `-- Extracting libXft-2.3.2_1: ......... done | | `-- Installing harfbuzz-1.3.2... | | | `-- Installing cairo-1.14.6_1,2... | | | `-- Installing glproto-1.4.17... | | | `-- Extracting glproto-1.4.17: ...... done | | | `-- Installing libEGL-11.2.2... | | | | `-- Installing libdevq-0.0.2_1... | | | | `-- Extracting libdevq-0.0.2_1: ....... done | | | | `-- Installing libxshmfence-1.2... | | | | `-- Extracting libxshmfence-1.2: ......... done | | | | `-- Installing libXext-1.3.3_1,1... | | | | `-- Installing xextproto-7.3.0... | | | | `-- Extracting xextproto-7.3.0: .......... done | | | | `-- Extracting libXext-1.3.3_1,1: .......... done | | | | `-- Installing gbm-11.2.2... | | | | `-- Installing libglapi-11.2.2... | | | | | `-- Installing libXvMC-1.0.9... | | | | | `-- Installing libXv-1.0.10_3,1... | | | | | | `-- Installing videoproto-2.3.2... | | | | | | `-- Extracting videoproto-2.3.2: ...... done | | | | | `-- Extracting libXv-1.0.10_3,1: .......... done | | | | | `-- Extracting libXvMC-1.0.9: .......... done | | | | | `-- Installing libdrm-2.4.66,1... | | | | | `-- Installing libpciaccess-0.13.4... | | | | | | `-- Installing pciids-20160621... | | | | | | `-- Extracting pciids-20160621: ..... done | | | | | `-- Extracting libpciaccess-0.13.4: ...... done | | | | | `-- Extracting libdrm-2.4.66,1: .......... done | | | | | `-- Installing libelf-0.8.13_1... | | | | | `-- Extracting libelf-0.8.13_1: .......... done | | | | `-- Extracting libglapi-11.2.2: ... done | | | | `-- Extracting gbm-11.2.2: ..... done | | | | `-- Installing llvm37-3.7.1_3... | | | | `-- Installing libedit-3.1.20150325_2,1... | | | | `-- Extracting libedit-3.1.20150325_2,1: .......... done | | | | `-- Extracting llvm37-3.7.1_3: .......... done | | | `-- Extracting libEGL-11.2.2: .......... done | | | `-- Installing libGL-11.2.2... | | | | `-- Installing dri2proto-2.8... | | | | `-- Extracting dri2proto-2.8: .... done | | | | `-- Installing libXxf86vm-1.1.4_1... | | | | `-- Installing xf86vidmodeproto-2.3.1... | | | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | | | `-- Extracting libGL-11.2.2: .......... done | | | `-- Installing xcb-util-renderutil-0.3.9_1... | | | | `-- Installing xcb-util-0.4.0_1,1... | | | | `-- Extracting xcb-util-0.4.0_1,1: .......... done | | | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done | | | `-- Installing png-1.6.23... | | | `-- Extracting png-1.6.23: .......... done | | | `-- Installing pixman-0.34.0... | | | `-- Extracting pixman-0.34.0: .......... done | | | `-- Extracting cairo-1.14.6_1,2: .......... done | | | `-- Installing icu-57.1,1... | | | `-- Extracting icu-57.1,1: .......... done | | | `-- Installing graphite2-1.3.8... | | | `-- Extracting graphite2-1.3.8: .......... done | | `-- Extracting harfbuzz-1.3.2: .......... done | | `-- Installing xorg-fonts-truetype-7.7_1... | | | `-- Installing font-misc-meltho-1.0.3_3... | | | `-- Installing mkfontdir-1.0.7... | | | | `-- Installing mkfontscale-1.1.2... | | | | `-- Installing libfontenc-1.1.3... | | | | `-- Extracting libfontenc-1.1.3: ...... done | | | | `-- Extracting mkfontscale-1.1.2: .. done | | | `-- Extracting mkfontdir-1.0.7: .. done | | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done | | | `-- Installing font-bh-ttf-1.0.3_3... | | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | | `-- Installing font-misc-ethiopic-1.0.3_3... | | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | | `-- Installing dejavu-2.35... | | | `-- Extracting dejavu-2.35: .......... done | | `-- Extracting pango-1.38.0_1: .......... done | | `-- Installing libXcursor-1.1.14_3... | | `-- Extracting libXcursor-1.1.14_3: .......... done | | `-- Installing libXinerama-1.1.3_3,1... | | `-- Installing xineramaproto-1.2.1... | | `-- Extracting xineramaproto-1.2.1: .. done | | `-- Extracting libXinerama-1.1.3_3,1: .......... done | | `-- Installing libXcomposite-0.4.4_3,1... | | `-- Installing compositeproto-0.4.2... | | `-- Extracting compositeproto-0.4.2: .... done | | `-- Extracting libXcomposite-0.4.4_3,1: .......... done | | `-- Installing libXi-1.7.6,1... | | `-- Installing inputproto-2.3.1... | | `-- Extracting inputproto-2.3.1: ..... done | | `-- Extracting libXi-1.7.6,1: .......... done | | `-- Installing libXrandr-1.5.0... | | `-- Installing randrproto-1.5.0... | | `-- Extracting randrproto-1.5.0: .... done | | `-- Extracting libXrandr-1.5.0: .......... done | | `-- Installing gdk-pixbuf2-2.32.3_1... | | `-- Installing jasper-1.900.1_16... | | | `-- Installing jpeg-turbo-1.4.2... | | | `-- Extracting jpeg-turbo-1.4.2: .......... done | | `-- Extracting jasper-1.900.1_16: .......... done | | `-- Installing libXt-1.1.5,1... | | | `-- Installing libSM-1.2.2_3,1... | | | `-- Installing libICE-1.0.9_1,1... | | | `-- Extracting libICE-1.0.9_1,1: .......... done | | | `-- Extracting libSM-1.2.2_3,1: .......... done | | `-- Extracting libXt-1.1.5,1: .......... done | | `-- Installing tiff-4.0.6_2... | | | `-- Installing jbigkit-2.1_1... | | | `-- Extracting jbigkit-2.1_1: .......... done | | `-- Extracting tiff-4.0.6_2: .......... done | | `-- Extracting gdk-pixbuf2-2.32.3_1: .......... done | | `-- Installing shared-mime-info-1.5... | | `-- Extracting shared-mime-info-1.5: .......... done | `-- Extracting gtk-update-icon-cache-2.24.29: .... done | `-- Installing cups-2.1.4... | | `-- Installing avahi-app-0.6.31_5... | | `-- Installing gnome_subr-1.0... | | `-- Extracting gnome_subr-1.0: . done | | `-- Installing gobject-introspection-1.46.0... | | | `-- Installing python2-2_3... | | | `-- Extracting python2-2_3: ...... done | | `-- Extracting gobject-introspection-1.46.0: .......... done | | `-- Installing gdbm-1.12... | | `-- Extracting gdbm-1.12: .......... done | | `-- Installing libdaemon-0.14_1... | | `-- Extracting libdaemon-0.14_1: .......... done | | `-- Installing dbus-glib-0.104... | | | `-- Installing dbus-1.8.20... ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | | | `-- Extracting dbus-1.8.20: ......... done | | `-- Extracting dbus-glib-0.104: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. | | `-- Extracting avahi-app-0.6.31_5: .......... done | | `-- Installing gnutls-3.4.15... | | `-- Installing nettle-3.2... | | | `-- Installing gmp-5.1.3_3... | | | `-- Extracting gmp-5.1.3_3: .......... done | | `-- Extracting nettle-3.2: .......... done | | `-- Installing libtasn1-4.9... | | `-- Extracting libtasn1-4.9: .......... done | | `-- Installing trousers-0.3.13_1... | | | `-- Installing tpm-emulator-0.7.4_1... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. | | | `-- Extracting tpm-emulator-0.7.4_1: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting trousers-0.3.13_1: .......... done | | `-- Installing p11-kit-0.23.2... | | `-- Extracting p11-kit-0.23.2: .......... done | | `-- Installing libidn-1.33_1... | | `-- Extracting libidn-1.33_1: .......... done | | `-- Extracting gnutls-3.4.15: .......... done | | `-- Installing libpaper-1.1.24.4... | | `-- Extracting libpaper-1.1.24.4: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. | `-- Extracting cups-2.1.4: .......... done | `-- Installing python-2.7_2,2... | `-- Extracting python-2.7_2,2: ..... done `-- Extracting gtk2-2.24.29_2: .......... done `-- Installing ORBit2-2.14.19_1... | `-- Installing libIDL-0.8.14_2... | `-- Extracting libIDL-0.8.14_2: ......... done `-- Extracting ORBit2-2.14.19_1: .......... done `-- Installing polkit-0.113_1... | `-- Installing spidermonkey170-17.0.0_1... | | `-- Installing nspr-4.13... | | `-- Extracting nspr-4.13: .......... done | `-- Extracting spidermonkey170-17.0.0_1: .......... done ===> Creating groups. Creating group 'polkitd' with gid '565'. ===> Creating users Creating user 'polkitd' with uid '565'. `-- Extracting polkit-0.113_1: ........ done `-- Installing dconf-0.24.0_1... `-- Extracting dconf-0.24.0_1: .......... done Extracting gconf2-3.2.6_4: .......... done Message from dejavu-2.35: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from trousers-0.3.13_1: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account ===> libproxy-gnome-0.4.12 depends on shared library: libgconf-2.so - found (/usr/local/lib/libgconf-2.so) ===> Returning to build of libproxy-gnome-0.4.12 ===> libproxy-gnome-0.4.12 depends on shared library: libglib-2.0.so - found (/usr/local/lib/libglib-2.0.so) ===> libproxy-gnome-0.4.12 depends on shared library: libgtk-x11-2.0.so - found (/usr/local/lib/libgtk-x11-2.0.so) ===> libproxy-gnome-0.4.12 depends on shared library: libIDL-2.so - found (/usr/local/lib/libIDL-2.so) ===> libproxy-gnome-0.4.12 depends on shared library: libxml2.so - found (/usr/local/lib/libxml2.so) ===> libproxy-gnome-0.4.12 depends on shared library: libORBit-2.so - found (/usr/local/lib/libORBit-2.so) ===> libproxy-gnome-0.4.12 depends on shared library: libpango-1.0.so - found (/usr/local/lib/libpango-1.0.so) =========================================================================== =================================================== ===> Configuring for libproxy-gnome-0.4.12 ===> Performing out-of-source build /bin/mkdir -p /wrkdirs/net/libproxy-gnome/.build -- The C compiler identification is GNU 5.4.1 -- The CXX compiler identification is GNU 5.4.1 -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done -- Building with bundled libmodman -- Found PkgConfig: pkgconf (found version "1.0.1") -- Checking for modules 'gconf-2.0;gobject-2.0' -- Found gconf-2.0, version 3.2.6 -- Found gobject-2.0, version 2.46.2 MODULES TO BUILD: * config_envvar config_sysconfig m config_gnome config_gnome3 config_kde config_macosx config_w32reg * ignore_domain * ignore_hostname * ignore_ip network_networkmanager pacrunner_mozjs pacrunner_natus pacrunner_webkit * wpad_dns_alias -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: CMAKE_CXX_FLAGS_DEBUG CMAKE_C_FLAGS_DEBUG THREADS_HAVE_PTHREAD_ARG -- Build files have been written to: /wrkdirs/net/libproxy-gnome/.build =========================================================================== =================================================== ===> Building for libproxy-gnome-0.4.12 /usr/local/bin/cmake -H/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -B/wrkdirs/net/libproxy-gnome/.build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/make -f CMakeFiles/Makefile2 pxgconf --- cmake_check_build_system --- /usr/local/bin/cmake -H/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -B/wrkdirs/net/libproxy-gnome/.build --check-build-system CMakeFiles/Makefile.cmake 0 --- libproxy/CMakeFiles/pxgconf.dir/rule --- /usr/local/bin/cmake -E cmake_progress_start /wrkdirs/net/libproxy-gnome/.build/CMakeFiles 3 /usr/bin/make -f CMakeFiles/Makefile2 libproxy/CMakeFiles/pxgconf.dir/all --- libproxy/CMakeFiles/pxgconf.dir/all --- /usr/bin/make -f libproxy/CMakeFiles/pxgconf.dir/build.make libproxy/CMakeFiles/pxgconf.dir/depend --- libproxy/CMakeFiles/pxgconf.dir/depend --- cd /wrkdirs/net/libproxy-gnome/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /wrkdirs/net/libproxy-gnome/libproxy-0.4.12 /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy /wrkdirs/net/libproxy-gnome/.build /wrkdirs/net/libproxy-gnome/.build/libproxy /wrkdirs/net/libproxy-gnome/.build/libproxy/CMakeFiles/pxgconf.dir/DependInfo.cmake Scanning dependencies of target pxgconf /usr/bin/make -f libproxy/CMakeFiles/pxgconf.dir/build.make libproxy/CMakeFiles/pxgconf.dir/build --- libproxy/CMakeFiles/pxgconf.dir/modules/pxgconf.cpp.o --- [ 33%] Building CXX object libproxy/CMakeFiles/pxgconf.dir/modules/pxgconf.cpp.o cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/bin/c++ -I/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -I/usr/local/include/gconf/2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/orbit-2.0 -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -o CMakeFiles/pxgconf.dir/modules/pxgconf.cpp.o -c /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/pxgconf.cpp /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/pxgconf.cpp: In function 'int main(int, char**)': /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/pxgconf.cpp:153:2: warning: 'void g_type_init()' is deprecated [-Wdeprecated-declarations] g_type_init(); ^ In file included from /usr/local/include/glib-2.0/gobject/gobject.h:24:0, from /usr/local/include/glib-2.0/gobject/gbinding.h:29, from /usr/local/include/glib-2.0/glib-object.h:23, from /usr/local/include/gconf/2/gconf/gconf-value.h:25, from /usr/local/include/gconf/2/gconf/gconf-schema.h:26, from /usr/local/include/gconf/2/gconf/gconf.h:27, from /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/pxgconf.cpp:7: /usr/local/include/glib-2.0/gobject/gtype.h:681:23: note: declared here void g_type_init (void); ^ /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/pxgconf.cpp:153:2: warning: 'void g_type_init()' is deprecated [-Wdeprecated-declarations] g_type_init(); ^ In file included from /usr/local/include/glib-2.0/gobject/gobject.h:24:0, from /usr/local/include/glib-2.0/gobject/gbinding.h:29, from /usr/local/include/glib-2.0/glib-object.h:23, from /usr/local/include/gconf/2/gconf/gconf-value.h:25, from /usr/local/include/gconf/2/gconf/gconf-schema.h:26, from /usr/local/include/gconf/2/gconf/gconf.h:27, from /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/pxgconf.cpp:7: /usr/local/include/glib-2.0/gobject/gtype.h:681:23: note: declared here void g_type_init (void); ^ /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/pxgconf.cpp:153:14: warning: 'void g_type_init()' is deprecated [-Wdeprecated-declarations] g_type_init(); ^ In file included from /usr/local/include/glib-2.0/gobject/gobject.h:24:0, from /usr/local/include/glib-2.0/gobject/gbinding.h:29, from /usr/local/include/glib-2.0/glib-object.h:23, from /usr/local/include/gconf/2/gconf/gconf-value.h:25, from /usr/local/include/gconf/2/gconf/gconf-schema.h:26, from /usr/local/include/gconf/2/gconf/gconf.h:27, from /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/pxgconf.cpp:7: /usr/local/include/glib-2.0/gobject/gtype.h:681:23: note: declared here void g_type_init (void); ^ --- libproxy/pxgconf --- [ 66%] Linking CXX executable pxgconf cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/pxgconf.dir/link.txt --verbose=1 /usr/bin/c++ -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing CMakeFiles/pxgconf.dir/modules/pxgconf.cpp.o -o pxgconf -L/usr/local/lib -lgconf-2 -lgobject-2.0 -lglib-2.0 -lintl -Wl,-rpath,/usr/local/lib [100%] Built target pxgconf /usr/local/bin/cmake -E cmake_progress_start /wrkdirs/net/libproxy-gnome/.build/CMakeFiles 0 /usr/bin/make -f CMakeFiles/Makefile2 config_gnome --- cmake_check_build_system --- /usr/local/bin/cmake -H/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -B/wrkdirs/net/libproxy-gnome/.build --check-build-system CMakeFiles/Makefile.cmake 0 --- libproxy/CMakeFiles/config_gnome.dir/rule --- /usr/local/bin/cmake -E cmake_progress_start /wrkdirs/net/libproxy-gnome/.build/CMakeFiles 17 /usr/bin/make -f CMakeFiles/Makefile2 libproxy/CMakeFiles/config_gnome.dir/all --- libmodman/CMakeFiles/modman.dir/all --- /usr/bin/make -f libmodman/CMakeFiles/modman.dir/build.make libmodman/CMakeFiles/modman.dir/depend --- libmodman/CMakeFiles/modman.dir/depend --- cd /wrkdirs/net/libproxy-gnome/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /wrkdirs/net/libproxy-gnome/libproxy-0.4.12 /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libmodman /wrkdirs/net/libproxy-gnome/.build /wrkdirs/net/libproxy-gnome/.build/libmodman /wrkdirs/net/libproxy-gnome/.build/libmodman/CMakeFiles/modman.dir/DependInfo.cmake Scanning dependencies of target modman /usr/bin/make -f libmodman/CMakeFiles/modman.dir/build.make libmodman/CMakeFiles/modman.dir/build --- libmodman/CMakeFiles/modman.dir/module_manager.cpp.o --- [ 5%] Building CXX object libmodman/CMakeFiles/modman.dir/module_manager.cpp.o cd /wrkdirs/net/libproxy-gnome/.build/libmodman && /usr/bin/c++ -I/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -fvisibility=hidden -fPIC -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -o CMakeFiles/modman.dir/module_manager.cpp.o -c /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libmodman/module_manager.cpp --- libmodman/libmodman.a --- [ 11%] Linking CXX static library libmodman.a cd /wrkdirs/net/libproxy-gnome/.build/libmodman && /usr/local/bin/cmake -P CMakeFiles/modman.dir/cmake_clean_target.cmake cd /wrkdirs/net/libproxy-gnome/.build/libmodman && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/modman.dir/link.txt --verbose=1 /usr/bin/ar qc libmodman.a CMakeFiles/modman.dir/module_manager.cpp.o /usr/bin/ranlib libmodman.a [ 11%] Built target modman --- libproxy/CMakeFiles/libproxy.dir/all --- /usr/bin/make -f libproxy/CMakeFiles/libproxy.dir/build.make libproxy/CMakeFiles/libproxy.dir/depend --- libproxy/CMakeFiles/libproxy.dir/depend --- cd /wrkdirs/net/libproxy-gnome/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /wrkdirs/net/libproxy-gnome/libproxy-0.4.12 /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy /wrkdirs/net/libproxy-gnome/.build /wrkdirs/net/libproxy-gnome/.build/libproxy /wrkdirs/net/libproxy-gnome/.build/libproxy/CMakeFiles/libproxy.dir/DependInfo.cmake Scanning dependencies of target libproxy /usr/bin/make -f libproxy/CMakeFiles/libproxy.dir/build.make libproxy/CMakeFiles/libproxy.dir/build --- libproxy/CMakeFiles/libproxy.dir/extension_config.cpp.o --- --- libproxy/CMakeFiles/libproxy.dir/extension_pacrunner.cpp.o --- --- libproxy/CMakeFiles/libproxy.dir/extension_wpad.cpp.o --- --- libproxy/CMakeFiles/libproxy.dir/proxy.cpp.o --- --- libproxy/CMakeFiles/libproxy.dir/url.cpp.o --- --- libproxy/CMakeFiles/libproxy.dir/extension_wpad.cpp.o --- [ 23%] Building CXX object libproxy/CMakeFiles/libproxy.dir/extension_wpad.cpp.o --- libproxy/CMakeFiles/libproxy.dir/extension_config.cpp.o --- [ 23%] Building CXX object libproxy/CMakeFiles/libproxy.dir/extension_config.cpp.o --- libproxy/CMakeFiles/libproxy.dir/extension_pacrunner.cpp.o --- [ 29%] Building CXX object libproxy/CMakeFiles/libproxy.dir/extension_pacrunner.cpp.o --- libproxy/CMakeFiles/libproxy.dir/extension_wpad.cpp.o --- cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/bin/c++ -Dlibproxy_EXPORTS -I/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -I/usr/local/include/gconf/2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/orbit-2.0 -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -o CMakeFiles/libproxy.dir/extension_wpad.cpp.o -c /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/extension_wpad.cpp --- libproxy/CMakeFiles/libproxy.dir/proxy.cpp.o --- [ 35%] Building CXX object libproxy/CMakeFiles/libproxy.dir/proxy.cpp.o --- libproxy/CMakeFiles/libproxy.dir/extension_config.cpp.o --- cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/bin/c++ -Dlibproxy_EXPORTS -I/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -I/usr/local/include/gconf/2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/orbit-2.0 -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -o CMakeFiles/libproxy.dir/extension_config.cpp.o -c /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/extension_config.cpp --- libproxy/CMakeFiles/libproxy.dir/proxy.cpp.o --- cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/bin/c++ -Dlibproxy_EXPORTS -DBUILTIN_MODULES=" X(config_envvar) X(ignore_domain) X(ignore_hostname) X(ignore_ip) X(wpad_dns_alias)" -DMODULEDIR=\"/usr/local/lib/libproxy/0.4.12/modules\" -I/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -I/usr/local/include/gconf/2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/orbit-2.0 -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -o CMakeFiles/libproxy.dir/proxy.cpp.o -c /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/proxy.cpp --- libproxy/CMakeFiles/libproxy.dir/extension_pacrunner.cpp.o --- cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/bin/c++ -Dlibproxy_EXPORTS -I/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -I/usr/local/include/gconf/2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/orbit-2.0 -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -o CMakeFiles/libproxy.dir/extension_pacrunner.cpp.o -c /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/extension_pacrunner.cpp --- libproxy/CMakeFiles/libproxy.dir/url.cpp.o --- [ 41%] Building CXX object libproxy/CMakeFiles/libproxy.dir/url.cpp.o cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/bin/c++ -Dlibproxy_EXPORTS -I/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -I/usr/local/include/gconf/2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/orbit-2.0 -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -o CMakeFiles/libproxy.dir/url.cpp.o -c /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/url.cpp --- libproxy/CMakeFiles/libproxy.dir/modules/config_envvar.cpp.o --- [ 47%] Building CXX object libproxy/CMakeFiles/libproxy.dir/modules/config_envvar.cpp.o cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/bin/c++ -Dlibproxy_EXPORTS -DLIBEXECDIR=\"/usr/local/libexec\" -DMM_MODULE_BUILTIN=config_envvar -I/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -I/usr/local/include/gconf/2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/orbit-2.0 -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -o CMakeFiles/libproxy.dir/modules/config_envvar.cpp.o -c /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/config_envvar.cpp --- libproxy/CMakeFiles/libproxy.dir/modules/ignore_domain.cpp.o --- [ 52%] Building CXX object libproxy/CMakeFiles/libproxy.dir/modules/ignore_domain.cpp.o cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/bin/c++ -Dlibproxy_EXPORTS -DLIBEXECDIR=\"/usr/local/libexec\" -DMM_MODULE_BUILTIN=ignore_domain -I/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -I/usr/local/include/gconf/2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/orbit-2.0 -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -o CMakeFiles/libproxy.dir/modules/ignore_domain.cpp.o -c /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/ignore_domain.cpp --- libproxy/CMakeFiles/libproxy.dir/modules/ignore_hostname.cpp.o --- [ 58%] Building CXX object libproxy/CMakeFiles/libproxy.dir/modules/ignore_hostname.cpp.o cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/bin/c++ -Dlibproxy_EXPORTS -DLIBEXECDIR=\"/usr/local/libexec\" -DMM_MODULE_BUILTIN=ignore_hostname -I/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -I/usr/local/include/gconf/2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/orbit-2.0 -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -o CMakeFiles/libproxy.dir/modules/ignore_hostname.cpp.o -c /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/ignore_hostname.cpp --- libproxy/CMakeFiles/libproxy.dir/modules/ignore_ip.cpp.o --- [ 64%] Building CXX object libproxy/CMakeFiles/libproxy.dir/modules/ignore_ip.cpp.o cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/bin/c++ -Dlibproxy_EXPORTS -DLIBEXECDIR=\"/usr/local/libexec\" -DMM_MODULE_BUILTIN=ignore_ip -I/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -I/usr/local/include/gconf/2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/orbit-2.0 -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -o CMakeFiles/libproxy.dir/modules/ignore_ip.cpp.o -c /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/ignore_ip.cpp --- libproxy/CMakeFiles/libproxy.dir/modules/wpad_dns_alias.cpp.o --- [ 70%] Building CXX object libproxy/CMakeFiles/libproxy.dir/modules/wpad_dns_alias.cpp.o cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/bin/c++ -Dlibproxy_EXPORTS -DLIBEXECDIR=\"/usr/local/libexec\" -DMM_MODULE_BUILTIN=wpad_dns_alias -I/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -I/usr/local/include/gconf/2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/orbit-2.0 -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -o CMakeFiles/libproxy.dir/modules/wpad_dns_alias.cpp.o -c /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/wpad_dns_alias.cpp --- libproxy/libproxy.so.1.0.0 --- [ 76%] Linking CXX shared library libproxy.so cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/libproxy.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -shared -Wl,-soname,libproxy.so.1 -o libproxy.so.1.0.0 CMakeFiles/libproxy.dir/extension_config.cpp.o CMakeFiles/libproxy.dir/extension_pacrunner.cpp.o CMakeFiles/libproxy.dir/extension_wpad.cpp.o CMakeFiles/libproxy.dir/proxy.cpp.o CMakeFiles/libproxy.dir/url.cpp.o CMakeFiles/libproxy.dir/modules/config_envvar.cpp.o CMakeFiles/libproxy.dir/modules/ignore_domain.cpp.o CMakeFiles/libproxy.dir/modules/ignore_hostname.cpp.o CMakeFiles/libproxy.dir/modules/ignore_ip.cpp.o CMakeFiles/libproxy.dir/modules/wpad_dns_alias.cpp.o -L/usr/local/lib ../libmodman/libmodman.a -lm -lpthread -Wl,-rpath,/usr/local/lib cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/local/bin/cmake -E cmake_symlink_library libproxy.so.1.0.0 libproxy.so.1 libproxy.so [ 82%] Built target libproxy --- libproxy/CMakeFiles/config_gnome.dir/all --- /usr/bin/make -f libproxy/CMakeFiles/config_gnome.dir/build.make libproxy/CMakeFiles/config_gnome.dir/depend --- libproxy/CMakeFiles/config_gnome.dir/depend --- cd /wrkdirs/net/libproxy-gnome/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /wrkdirs/net/libproxy-gnome/libproxy-0.4.12 /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy /wrkdirs/net/libproxy-gnome/.build /wrkdirs/net/libproxy-gnome/.build/libproxy /wrkdirs/net/libproxy-gnome/.build/libproxy/CMakeFiles/config_gnome.dir/DependInfo.cmake Scanning dependencies of target config_gnome /usr/bin/make -f libproxy/CMakeFiles/config_gnome.dir/build.make libproxy/CMakeFiles/config_gnome.dir/build --- libproxy/CMakeFiles/config_gnome.dir/modules/config_gnome.cpp.o --- [ 88%] Building CXX object libproxy/CMakeFiles/config_gnome.dir/modules/config_gnome.cpp.o cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/bin/c++ -Dconfig_gnome_EXPORTS -DLIBEXECDIR=\"/usr/local/libexec\" -I/wrkdirs/net/libproxy-gnome/libproxy-0.4.12 -I/usr/local/include/gconf/2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/orbit-2.0 -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -o CMakeFiles/config_gnome.dir/modules/config_gnome.cpp.o -c /wrkdirs/net/libproxy-gnome/libproxy-0.4.12/libproxy/modules/config_gnome.cpp --- libproxy/config_gnome.so --- [ 94%] Linking CXX shared module config_gnome.so cd /wrkdirs/net/libproxy-gnome/.build/libproxy && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/config_gnome.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -fvisibility=hidden -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -shared -o config_gnome.so CMakeFiles/config_gnome.dir/modules/config_gnome.cpp.o -L/usr/local/lib libproxy.so.1.0.0 -Wl,-rpath,/wrkdirs/net/libproxy-gnome/.build/libproxy:/usr/local/lib [100%] Built target config_gnome /usr/local/bin/cmake -E cmake_progress_start /wrkdirs/net/libproxy-gnome/.build/CMakeFiles 0 =========================================================================== =================================================== =========================================================================== =================================================== ===> Staging for libproxy-gnome-0.4.12 ===> Generating temporary packing list /bin/mkdir -p /wrkdirs/net/libproxy-gnome/stage/usr/local/lib/libproxy/0.4.12/modules/ install -s -m 444 /wrkdirs/net/libproxy-gnome/.build/libproxy/config_gnome.so /wrkdirs/net/libproxy-gnome/stage/usr/local/lib/libproxy/0.4.12/modules/ install -s -m 555 /wrkdirs/net/libproxy-gnome/.build/libproxy/pxgconf /wrkdirs/net/libproxy-gnome/stage/usr/local/libexec/ ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for libproxy-gnome-0.4.12 file sizes/checksums [2]: . done packing files [2]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for libproxy-gnome-0.4.12 build of net/libproxy-gnome ended at Wed Oct 5 05:56:02 PDT 2016 build time: 00:01:22