=> Building x11/guake build started at Wed Oct 5 18:36:45 PDT 2016 port directory: /usr/ports/x11/guake building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: nivit@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../09//usr/ports/x11/guake/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=guake-0.8.4 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ===> The following configuration options are available for guake-0.8.4: MANPAGES=on: Build and/or install manual pages NLS=on: Native Language Support ===> Use 'make config' to modify these settings ---End OPTIONS List--- --CONFIGURE_ARGS-- --enable-nls --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- MAKE=gmake PKG_CONFIG=pkgconf PYTHON="/usr/local/bin/python2.7" ESD_CONFIG="/usr/local/bin/esd-config" XDG_DATA_HOME=/wrkdirs/x11/guake XDG_CONFIG_HOME=/wrkdirs/x11/guake HOME=/wrkdirs/x11/guake TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144 --End CONFIGURE_ENV-- --MAKE_ENV-- ESD_CONFIG="/usr/local/bin/esd-config" GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1 XDG_DATA_HOME=/wrkdirs/x11/guake XDG_CONFIG_HOME=/wrkdirs/x11/guake HOME=/wrkdirs/x11/guake TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="-I/usr/local/include" LDFLAGS="" LIBS="-L/usr/local/lib" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- DESKTOPDIR="share/applications" MANPAGES="" NO_MANPAGES="@comment " NLS="" NO_NLS="@comment " PYTHON_INCLUDEDIR=include/python2.7 PYTHON_LIBDIR=lib/python2.7 PYTHON_PLATFORM=dragonfly4 PYTHON_SITELIBDIR=lib/python2.7/site-packages PYTHON_VER=2.7 PYTHON_VERSION=python2.7 GTK2_VERSION="2.10.0" GTK3_VERSION="3.0.0" OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/guake" EXAMPLESDIR="share/examples/guake" DATADIR="share/guake" WWWDIR="www/guake" ETCDIR="etc/guake" --End PLIST_SUB-- --SUB_LIST-- MANPAGES="" NO_MANPAGES="@comment " NLS="" NO_NLS="@comment " PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/guake DOCSDIR=/usr/local/share/doc/guake EXAMPLESDIR=/usr/local/share/examples/guake WWWDIR=/usr/local/www/guake ETCDIR=/usr/local/etc/guake --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== ===> License GPLv2 accepted by the user =========================================================================== =================================================== ===> guake-0.8.4 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> guake-0.8.4 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of guake-0.8.4 =========================================================================== =================================================== =========================================================================== =================================================== ===> License GPLv2 accepted by the user ===> Fetching all distfiles required by guake-0.8.4 for building =========================================================================== =================================================== ===> License GPLv2 accepted by the user ===> Fetching all distfiles required by guake-0.8.4 for building => SHA256 Checksum OK for Guake-guake-0.8.4_GH0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> License GPLv2 accepted by the user ===> Fetching all distfiles required by guake-0.8.4 for building ===> Extracting for guake-0.8.4 => SHA256 Checksum OK for Guake-guake-0.8.4_GH0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for guake-0.8.4 ===> Applying ports patches for guake-0.8.4 =========================================================================== =================================================== ===> guake-0.8.4 depends on package: gnome-common>=3.14.0 - not found ===> Installing existing package /packages/All/gnome-common-3.18.0.txz Installing gnome-common-3.18.0... `-- Installing autoconf-archive-0.2016.03.20... | `-- Installing indexinfo-0.2.5... | `-- Extracting indexinfo-0.2.5: .... done `-- Extracting autoconf-archive-0.2016.03.20: .......... done Extracting gnome-common-3.18.0: .... done ===> guake-0.8.4 depends on package: gnome-common>=3.14.0 - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on package: py27-dbus>=0.84.0 - not found ===> Installing existing package /packages/All/py27-dbus-1.2.0_1.txz Installing py27-dbus-1.2.0_1... `-- Installing dbus-glib-0.104... | `-- Installing dbus-1.8.20... | | `-- Installing expat-2.2.0... | | `-- Extracting expat-2.2.0: .......... done | | `-- Installing gnome_subr-1.0... | | `-- Extracting gnome_subr-1.0: . done | | `-- Installing libX11-1.6.3,1... | | `-- Installing xproto-7.0.28... | | `-- Extracting xproto-7.0.28: .......... done | | `-- Installing kbproto-1.0.7... | | `-- Extracting kbproto-1.0.7: .......... done | | `-- Installing libXdmcp-1.1.2... | | `-- Extracting libXdmcp-1.1.2: ......... done | | `-- Installing libxcb-1.11.1... | | | `-- Installing libxml2-2.9.4... | | | `-- Extracting libxml2-2.9.4: .......... done | | | `-- Installing libpthread-stubs-0.3_6... | | | `-- Extracting libpthread-stubs-0.3_6: ..... done | | | `-- Installing libXau-1.0.8_3... | | | `-- Extracting libXau-1.0.8_3: .......... done | | `-- Extracting libxcb-1.11.1: .......... done | | `-- Extracting libX11-1.6.3,1: .......... done | | `-- Installing libICE-1.0.9_1,1... | | `-- Extracting libICE-1.0.9_1,1: .......... done | | `-- Installing libSM-1.2.2_3,1... | | `-- Extracting libSM-1.2.2_3,1: .......... done ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | `-- Extracting dbus-1.8.20: ......... done | `-- Installing gettext-runtime-0.19.8.1... | `-- Extracting gettext-runtime-0.19.8.1: .......... done | `-- Installing glib-2.46.2_3... | | `-- Installing libiconv-1.14_9... | | `-- Extracting libiconv-1.14_9: .......... done | | `-- Installing python27-2.7.12... | | `-- Installing readline-6.3.8... | | | `-- Installing ncurses-6.0_5... | | | `-- Extracting ncurses-6.0_5: .......... done | | `-- Extracting readline-6.3.8: .......... done | | `-- Installing libffi-3.2.1... | | `-- Extracting libffi-3.2.1: .......... done | | `-- Installing libressl-2.4.3... | | `-- Extracting libressl-2.4.3: .......... done | | `-- Extracting python27-2.7.12: .......... done | | `-- Installing pcre-8.39... | | `-- Extracting pcre-8.39: .......... done | | `-- Installing perl5-5.20.3_15... | | `-- Extracting perl5-5.20.3_15: .......... done | `-- Extracting glib-2.46.2_3: .......... done No schema files found: doing nothing. `-- Extracting dbus-glib-0.104: .......... done `-- Installing pydbus-common-1.2.0_1... `-- Extracting pydbus-common-1.2.0_1: .......... done `-- Installing python2-2_3... `-- Extracting python2-2_3: ...... done Extracting py27-dbus-1.2.0_1: .......... done Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from python27-2.7.12: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== Message from perl5-5.20.3_15: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. ===> guake-0.8.4 depends on package: py27-dbus>=0.84.0 - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on package: py27-notify>=0.1.1_9 - not found ===> Installing existing package /packages/All/py27-notify-0.1.1_11.txz Installing py27-notify-0.1.1_11... `-- Installing py27-gtk2-2.24.0_4... | `-- Installing gtk2-2.24.29_2... | | `-- Installing hicolor-icon-theme-0.15... | | `-- Extracting hicolor-icon-theme-0.15: . done | | `-- Installing libXdamage-1.1.4_3... | | `-- Installing libXfixes-5.0.1_3... | | | `-- Installing fixesproto-5.0... | | | `-- Extracting fixesproto-5.0: .... done | | `-- Extracting libXfixes-5.0.1_3: .......... done | | `-- Installing damageproto-1.2.1... | | `-- Extracting damageproto-1.2.1: .... done | | `-- Extracting libXdamage-1.1.4_3: ...... done | | `-- Installing gtk-update-icon-cache-2.24.29... | | `-- Installing pango-1.38.0_1... | | | `-- Installing encodings-1.0.4_3,1... | | | `-- Installing font-util-1.3.1... | | | `-- Extracting font-util-1.3.1: .......... done | | | `-- Extracting encodings-1.0.4_3,1: .......... done | | | `-- Installing fontconfig-2.12.1,1... | | | `-- Installing freetype2-2.6.3... | | | `-- Extracting freetype2-2.6.3: .......... done | | | `-- Extracting fontconfig-2.12.1,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: caching, new cache contents: 0 fonts, 2 dirs /usr/local/share/fonts/encodings: caching, new cache contents: 0 fonts, 1 dirs /usr/local/share/fonts/encodings/large: caching, new cache contents: 0 fonts, 0 dirs /usr/local/share/fonts/util: caching, new cache contents: 0 fonts, 0 dirs /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | | | `-- Installing libXft-2.3.2_1... | | | `-- Installing libXrender-0.9.9... | | | | `-- Installing renderproto-0.11.1... | | | | `-- Extracting renderproto-0.11.1: .... done | | | `-- Extracting libXrender-0.9.9: .......... done | | | `-- Extracting libXft-2.3.2_1: ......... done | | | `-- Installing harfbuzz-1.3.2... | | | `-- Installing cairo-1.14.6_1,2... | | | | `-- Installing glproto-1.4.17... | | | | `-- Extracting glproto-1.4.17: ...... done | | | | `-- Installing libEGL-11.2.2... | | | | `-- Installing libdevq-0.0.2_1... | | | | `-- Extracting libdevq-0.0.2_1: ....... done | | | | `-- Installing libxshmfence-1.2... | | | | `-- Extracting libxshmfence-1.2: ......... done | | | | `-- Installing libXext-1.3.3_1,1... | | | | | `-- Installing xextproto-7.3.0... | | | | | `-- Extracting xextproto-7.3.0: .......... done | | | | `-- Extracting libXext-1.3.3_1,1: .......... done | | | | `-- Installing gbm-11.2.2... | | | | | `-- Installing libglapi-11.2.2... | | | | | `-- Installing libXvMC-1.0.9... | | | | | | `-- Installing libXv-1.0.10_3,1... | | | | | | `-- Installing videoproto-2.3.2... | | | | | | `-- Extracting videoproto-2.3.2: ...... done | | | | | | `-- Extracting libXv-1.0.10_3,1: .......... done | | | | | `-- Extracting libXvMC-1.0.9: .......... done | | | | | `-- Installing libdrm-2.4.66,1... | | | | | | `-- Installing libpciaccess-0.13.4... | | | | | | `-- Installing pciids-20160621... | | | | | | `-- Extracting pciids-20160621: ..... done | | | | | | `-- Extracting libpciaccess-0.13.4: ...... done | | | | | `-- Extracting libdrm-2.4.66,1: .......... done | | | | | `-- Installing libelf-0.8.13_1... | | | | | `-- Extracting libelf-0.8.13_1: .......... done | | | | | `-- Extracting libglapi-11.2.2: ... done | | | | `-- Extracting gbm-11.2.2: ..... done | | | | `-- Installing llvm37-3.7.1_3... | | | | | `-- Installing libedit-3.1.20150325_2,1... | | | | | `-- Extracting libedit-3.1.20150325_2,1: .......... done | | | | `-- Extracting llvm37-3.7.1_3: .......... done | | | | `-- Extracting libEGL-11.2.2: .......... done | | | | `-- Installing libGL-11.2.2... | | | | `-- Installing dri2proto-2.8... | | | | `-- Extracting dri2proto-2.8: .... done | | | | `-- Installing libXxf86vm-1.1.4_1... | | | | | `-- Installing xf86vidmodeproto-2.3.1... | | | | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | | | | `-- Extracting libGL-11.2.2: .......... done | | | | `-- Installing xcb-util-renderutil-0.3.9_1... | | | | `-- Installing xcb-util-0.4.0_1,1... | | | | `-- Extracting xcb-util-0.4.0_1,1: .......... done | | | | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done | | | | `-- Installing png-1.6.23... | | | | `-- Extracting png-1.6.23: .......... done | | | | `-- Installing pixman-0.34.0... | | | | `-- Extracting pixman-0.34.0: .......... done | | | `-- Extracting cairo-1.14.6_1,2: .......... done | | | `-- Installing icu-57.1,1... | | | `-- Extracting icu-57.1,1: .......... done | | | `-- Installing graphite2-1.3.8... | | | `-- Extracting graphite2-1.3.8: .......... done | | | `-- Extracting harfbuzz-1.3.2: .......... done | | | `-- Installing xorg-fonts-truetype-7.7_1... | | | `-- Installing font-misc-meltho-1.0.3_3... | | | | `-- Installing mkfontdir-1.0.7... | | | | `-- Installing mkfontscale-1.1.2... | | | | | `-- Installing libfontenc-1.1.3... | | | | | `-- Extracting libfontenc-1.1.3: ...... done | | | | `-- Extracting mkfontscale-1.1.2: .. done | | | | `-- Extracting mkfontdir-1.0.7: .. done | | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done | | | `-- Installing font-bh-ttf-1.0.3_3... | | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | | `-- Installing font-misc-ethiopic-1.0.3_3... | | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | | `-- Installing dejavu-2.35... | | | `-- Extracting dejavu-2.35: .......... done | | `-- Extracting pango-1.38.0_1: .......... done | | `-- Installing libXcursor-1.1.14_3... | | `-- Extracting libXcursor-1.1.14_3: .......... done | | `-- Installing libXinerama-1.1.3_3,1... | | | `-- Installing xineramaproto-1.2.1... | | | `-- Extracting xineramaproto-1.2.1: .. done | | `-- Extracting libXinerama-1.1.3_3,1: .......... done | | `-- Installing libXcomposite-0.4.4_3,1... | | | `-- Installing compositeproto-0.4.2... | | | `-- Extracting compositeproto-0.4.2: .... done | | `-- Extracting libXcomposite-0.4.4_3,1: .......... done | | `-- Installing libXi-1.7.6,1... | | | `-- Installing inputproto-2.3.1... | | | `-- Extracting inputproto-2.3.1: ..... done | | `-- Extracting libXi-1.7.6,1: .......... done | | `-- Installing atk-2.18.0... | | `-- Extracting atk-2.18.0: .......... done | | `-- Installing libXrandr-1.5.0... | | | `-- Installing randrproto-1.5.0... | | | `-- Extracting randrproto-1.5.0: .... done | | `-- Extracting libXrandr-1.5.0: .......... done | | `-- Installing gdk-pixbuf2-2.32.3_1... | | | `-- Installing jasper-1.900.1_16... | | | `-- Installing jpeg-turbo-1.4.2... | | | `-- Extracting jpeg-turbo-1.4.2: .......... done | | | `-- Extracting jasper-1.900.1_16: .......... done | | | `-- Installing libXt-1.1.5,1... | | | `-- Extracting libXt-1.1.5,1: .......... done | | | `-- Installing tiff-4.0.6_2... | | | `-- Installing jbigkit-2.1_1... | | | `-- Extracting jbigkit-2.1_1: .......... done | | | `-- Extracting tiff-4.0.6_2: .......... done | | `-- Extracting gdk-pixbuf2-2.32.3_1: .......... done | | `-- Installing shared-mime-info-1.5... | | `-- Extracting shared-mime-info-1.5: .......... done | | `-- Extracting gtk-update-icon-cache-2.24.29: .... done | | `-- Installing cups-2.1.4... | | `-- Installing avahi-app-0.6.31_5... | | | `-- Installing gobject-introspection-1.46.0... | | | `-- Extracting gobject-introspection-1.46.0: .......... done | | | `-- Installing gdbm-1.12... | | | `-- Extracting gdbm-1.12: .......... done | | | `-- Installing libdaemon-0.14_1... | | | `-- Extracting libdaemon-0.14_1: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. | | `-- Extracting avahi-app-0.6.31_5: .......... done | | `-- Installing gnutls-3.4.15... | | | `-- Installing nettle-3.2... | | | `-- Installing gmp-5.1.3_3... | | | `-- Extracting gmp-5.1.3_3: .......... done | | | `-- Extracting nettle-3.2: .......... done | | | `-- Installing ca_root_nss-3.27... | | | `-- Extracting ca_root_nss-3.27: ....... done | | | `-- Installing libtasn1-4.9... | | | `-- Extracting libtasn1-4.9: .......... done | | | `-- Installing trousers-0.3.13_1... | | | `-- Installing tpm-emulator-0.7.4_1... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. | | | `-- Extracting tpm-emulator-0.7.4_1: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | | `-- Extracting trousers-0.3.13_1: .......... done | | | `-- Installing p11-kit-0.23.2... | | | `-- Extracting p11-kit-0.23.2: .......... done | | | `-- Installing libidn-1.33_1... | | | `-- Extracting libidn-1.33_1: .......... done | | `-- Extracting gnutls-3.4.15: .......... done | | `-- Installing libpaper-1.1.24.4... | | `-- Extracting libpaper-1.1.24.4: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. | | `-- Extracting cups-2.1.4: .......... done | | `-- Installing python-2.7_2,2... | | `-- Extracting python-2.7_2,2: ..... done | `-- Extracting gtk2-2.24.29_2: .......... done | `-- Installing py27-gobject-2.28.6_6... | | `-- Installing py27-cairo-1.10.0_2... | | `-- Extracting py27-cairo-1.10.0_2: ...... done | `-- Extracting py27-gobject-2.28.6_6: .......... done | `-- Installing libglade2-2.6.4_8... | | `-- Installing xmlcatmgr-2.2_2... | | `-- Extracting xmlcatmgr-2.2_2: ......... done + Creating /usr/local/share/sgml/catalog + Registering CATALOG catalog.ports (SGML) + Creating /usr/local/share/sgml/catalog.ports + Creating /usr/local/share/xml/catalog + Registering nextCatalog catalog.ports (XML) + Creating /usr/local/share/xml/catalog.ports | `-- Extracting libglade2-2.6.4_8: .......... done `-- Extracting py27-gtk2-2.24.0_4: .......... done `-- Installing libnotify-0.7.6_1... `-- Extracting libnotify-0.7.6_1: .......... done Extracting py27-notify-0.1.1_11: .......... done Message from dejavu-2.35: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.13_1: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Message from xmlcatmgr-2.2_2: The following catalogs are installed: 1) /usr/local/share/sgml/catalog The top level catalog for SGML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 2) /usr/local/share/sgml/catalog.ports This catalog is for handling SGML stuff installed under /usr/local/share/sgml. It is changed by ports/packages. 3) /usr/local/share/xml/catalog The top level catalog for XML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 4) /usr/local/share/xml/catalog.ports This catalog is for handling XML stuff installed under /usr/local/share/xml. It is changed by ports/packages. ===> guake-0.8.4 depends on package: py27-notify>=0.1.1_9 - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on package: py27-vte>=0.26.2_1 - not found ===> Installing existing package /packages/All/py27-vte-0.28.2_2.txz Installing py27-vte-0.28.2_2... `-- Installing gnome-pty-helper-0.40.2... `-- Extracting gnome-pty-helper-0.40.2: . done `-- Installing vte-0.28.2_2... `-- Extracting vte-0.28.2_2: .......... done Extracting py27-vte-0.28.2_2: .... done ===> guake-0.8.4 depends on package: py27-vte>=0.26.2_1 - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on package: py27-xdg>=0.19 - not found ===> Installing existing package /packages/All/py27-xdg-0.25.txz Installing py27-xdg-0.25... `-- Installing py27-setuptools27-23.1.0... `-- Extracting py27-setuptools27-23.1.0: .......... done Extracting py27-xdg-0.25: .......... done ===> guake-0.8.4 depends on package: py27-xdg>=0.19 - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on executable: autoconf-2.69 - not found ===> Installing existing package /packages/All/autoconf-2.69_1.txz Installing autoconf-2.69_1... `-- Installing autoconf-wrapper-20131203... `-- Extracting autoconf-wrapper-20131203: ........ done `-- Installing m4-1.4.17_1,1... `-- Extracting m4-1.4.17_1,1: .......... done Extracting autoconf-2.69_1: .......... done ===> guake-0.8.4 depends on executable: autoconf-2.69 - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on executable: autoheader-2.69 - found ===> guake-0.8.4 depends on executable: autoreconf-2.69 - found ===> guake-0.8.4 depends on executable: aclocal-1.15 - not found ===> Installing existing package /packages/All/automake-1.15_1.txz Installing automake-1.15_1... `-- Installing automake-wrapper-20131203... `-- Extracting automake-wrapper-20131203: ... done Extracting automake-1.15_1: .......... done ===> guake-0.8.4 depends on executable: aclocal-1.15 - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on executable: automake-1.15 - found ===> guake-0.8.4 depends on executable: libtoolize - not found ===> Installing existing package /packages/All/libtool-2.4.6.txz Installing libtool-2.4.6... Extracting libtool-2.4.6: .......... done ===> guake-0.8.4 depends on executable: libtoolize - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on executable: update-desktop-database - not found ===> Installing existing package /packages/All/desktop-file-utils-0.22_3.txz Installing desktop-file-utils-0.22_3... Extracting desktop-file-utils-0.22_3: .......... done ===> guake-0.8.4 depends on executable: update-desktop-database - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on executable: msgfmt - not found ===> Installing existing package /packages/All/gettext-tools-0.19.8.1.txz Installing gettext-tools-0.19.8.1... Extracting gettext-tools-0.19.8.1: .......... done ===> guake-0.8.4 depends on executable: msgfmt - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on executable: gmake - not found ===> Installing existing package /packages/All/gmake-4.2.1_1.txz Installing gmake-4.2.1_1... Extracting gmake-4.2.1_1: .......... done ===> guake-0.8.4 depends on executable: gmake - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on package: pkgconf>=0.9.10 - not found ===> Installing existing package /packages/All/pkgconf-1.0.1.txz Installing pkgconf-1.0.1... Extracting pkgconf-1.0.1: .......... done ===> guake-0.8.4 depends on package: pkgconf>=0.9.10 - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on file: /usr/local/bin/python2.7 - found ===> guake-0.8.4 depends on executable: python2 - found ===> guake-0.8.4 depends on file: /usr/local/libdata/pkgconfig/gnome-mime-data-2.0.pc - not found ===> Installing existing package /packages/All/gnome-mime-data-2.18.0_5.txz Installing gnome-mime-data-2.18.0_5... Extracting gnome-mime-data-2.18.0_5: .......... done ===> guake-0.8.4 depends on file: /usr/local/libdata/pkgconfig/gnome-mime-data-2.0.pc - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on executable: gtk-update-icon-cache - found ===> guake-0.8.4 depends on file: /usr/local/bin/intltool-extract - not found ===> Installing existing package /packages/All/intltool-0.51.0_1.txz Installing intltool-0.51.0_1... `-- Installing p5-XML-Parser-2.44... `-- Extracting p5-XML-Parser-2.44: .......... done Extracting intltool-0.51.0_1: .......... done ===> guake-0.8.4 depends on file: /usr/local/bin/intltool-extract - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on file: /usr/local/libdata/pkgconfig/gnome-python-2.0.pc - not found ===> Installing existing package /packages/All/py27-gnome-2.28.1_6.txz Installing py27-gnome-2.28.1_6... `-- Installing libbonobo-2.32.0_2... | `-- Installing popt-1.16_1... | `-- Extracting popt-1.16_1: .......... done | `-- Installing ORBit2-2.14.19_1... | | `-- Installing libIDL-0.8.14_2... | | `-- Extracting libIDL-0.8.14_2: ......... done | `-- Extracting ORBit2-2.14.19_1: .......... done `-- Extracting libbonobo-2.32.0_2: .......... done `-- Installing gconf2-3.2.6_4... | `-- Installing polkit-0.113_1... | | `-- Installing spidermonkey170-17.0.0_1... | | `-- Installing nspr-4.13... | | `-- Extracting nspr-4.13: .......... done | | `-- Extracting spidermonkey170-17.0.0_1: .......... done ===> Creating groups. Creating group 'polkitd' with gid '565'. ===> Creating users Creating user 'polkitd' with uid '565'. | `-- Extracting polkit-0.113_1: ........ done | `-- Installing dconf-0.24.0_1... | `-- Extracting dconf-0.24.0_1: .......... done `-- Extracting gconf2-3.2.6_4: .......... done `-- Installing esound-0.2.41_3... | `-- Installing libaudiofile-0.3.6_3... | | `-- Installing flac-1.3.1_2... | | `-- Installing libogg-1.3.2_1,4... | | `-- Extracting libogg-1.3.2_1,4: .......... done | | `-- Extracting flac-1.3.1_2: .......... done | `-- Extracting libaudiofile-0.3.6_3: .......... done `-- Extracting esound-0.2.41_3: .......... done `-- Installing py27-orbit-2.24.0_2... `-- Extracting py27-orbit-2.24.0_2: ......... done `-- Installing libgnomeui-2.24.4_5... | `-- Installing gnome-icon-theme-3.12.0_1... | | `-- Installing gnome-icon-theme-symbolic-3.12.0... | | `-- Extracting gnome-icon-theme-symbolic-3.12.0: .......... done | `-- Extracting gnome-icon-theme-3.12.0_1: .......... done | `-- Installing libgnomecanvas-2.30.3_3... | | `-- Installing libart_lgpl-2.3.21_2,1... | | `-- Extracting libart_lgpl-2.3.21_2,1: .......... done | `-- Extracting libgnomecanvas-2.30.3_3: .......... done | `-- Installing libbonoboui-2.24.4_3... | | `-- Installing gnome-vfs-2.24.4_4... | | `-- Installing gamin-0.1.10_8... | | `-- Extracting gamin-0.1.10_8: .......... done | | `-- Installing samba36-libsmbclient-3.6.25_2... | | | `-- Installing talloc-2.1.6... | | | `-- Extracting talloc-2.1.6: .......... done | | | `-- Installing tdb-1.3.9,1... | | | `-- Extracting tdb-1.3.9,1: .......... done | | | `-- Installing tevent-0.9.28... | | | `-- Extracting tevent-0.9.28: .......... done | | `-- Extracting samba36-libsmbclient-3.6.25_2: .......... done | | `-- Extracting gnome-vfs-2.24.4_4: .......... done | | `-- Installing libgnome-2.32.0_3... | | `-- Installing libXpm-3.5.11_4... | | `-- Extracting libXpm-3.5.11_4: .......... done | | `-- Installing libcanberra-0.30_3... | | | `-- Installing libvorbis-1.3.5,3... | | | `-- Extracting libvorbis-1.3.5,3: .......... done | | | `-- Installing libltdl-2.4.6... | | | `-- Extracting libltdl-2.4.6: .......... done | | `-- Extracting libcanberra-0.30_3: .......... done | | `-- Installing rarian-0.8.1_4... | | | `-- Installing bash-4.3.46_1... | | | `-- Extracting bash-4.3.46_1: .......... done | | | `-- Installing docbook-xsl-1.76.1_3... | | | `-- Installing docbook-1.5... | | | | `-- Installing sdocbook-xml-1.1_2,2... | | | | `-- Extracting sdocbook-xml-1.1_2,2: .......... done | | | | `-- Installing docbook-sgml-4.5_1... | | | | `-- Installing iso8879-1986_3... | | | | `-- Extracting iso8879-1986_3: .......... done | | | | `-- Extracting docbook-sgml-4.5_1: .......... done | | | | `-- Installing docbook-xml-5.0_3... | | | | `-- Installing xmlcharent-0.3_2... | | | | `-- Extracting xmlcharent-0.3_2: .......... done | | | | `-- Extracting docbook-xml-5.0_3: .......... done | | | `-- Extracting docbook-xsl-1.76.1_3: .......... done | | | `-- Installing libxslt-1.1.29... | | | `-- Installing libgcrypt-1.7.3... | | | | `-- Installing libgpg-error-1.24... | | | | `-- Extracting libgpg-error-1.24: .......... done | | | `-- Extracting libgcrypt-1.7.3: .......... done | | | `-- Extracting libxslt-1.1.29: .......... done | | | `-- Installing getopt-1.1.6... | | | `-- Extracting getopt-1.1.6: .......... done | | `-- Extracting rarian-0.8.1_4: .......... done | | `-- Extracting libgnome-2.32.0_3: .......... done | `-- Extracting libbonoboui-2.24.4_3: .......... done | `-- Installing startup-notification-0.12_4... | `-- Extracting startup-notification-0.12_4: .......... done | `-- Installing gvfs-1.26.3_2... | | `-- Installing libsecret-0.18.4... | | `-- Extracting libsecret-0.18.4: .......... done | | `-- Installing gcr-3.18.0... | | `-- Installing gtk3-3.18.8_3... | | | `-- Installing colord-1.2.11_1... | | | `-- Installing lcms2-2.7_2... | | | `-- Extracting lcms2-2.7_2: .......... done | | | `-- Installing argyllcms-1.7.0_1... | | | | `-- Installing libXScrnSaver-1.2.2_3... | | | | `-- Installing scrnsaverproto-1.2.2... | | | | `-- Extracting scrnsaverproto-1.2.2: ... done | | | | `-- Extracting libXScrnSaver-1.2.2_3: .......... done | | | `-- Extracting argyllcms-1.7.0_1: .......... done | | | `-- Installing sqlite3-3.14.1_1... | | | `-- Extracting sqlite3-3.14.1_1: .......... done ===> Creating groups. Creating group 'colord' with gid '970'. ===> Creating users Creating user 'colord' with uid '970'. | | | `-- Extracting colord-1.2.11_1: .......... done | | | `-- Installing libepoxy-1.3.1... | | | `-- Installing libglesv2-11.2.2... | | | `-- Extracting libglesv2-11.2.2: .......... done | | | `-- Extracting libepoxy-1.3.1: .......... done | | | `-- Installing at-spi2-atk-2.18.1... | | | `-- Installing at-spi2-core-2.18.3... | | | | `-- Installing libXtst-1.2.2_3... | | | | `-- Installing recordproto-1.14.2... | | | | `-- Extracting recordproto-1.14.2: .... done | | | | `-- Extracting libXtst-1.2.2_3: .......... done | | | `-- Extracting at-spi2-core-2.18.3: .......... done | | | `-- Extracting at-spi2-atk-2.18.1: .......... done | | | `-- Installing adwaita-icon-theme-3.18.0... | | | `-- Extracting adwaita-icon-theme-3.18.0: .......... done | | `-- Extracting gtk3-3.18.8_3: .......... done | | `-- Extracting gcr-3.18.0: .......... done | | `-- Installing libarchive-3.2.1,1... | | `-- Installing liblz4-131... | | `-- Extracting liblz4-131: .......... done | | `-- Installing lzo2-2.09... | | `-- Extracting lzo2-2.09: .......... done | | `-- Extracting libarchive-3.2.1,1: .......... done | | `-- Installing libsoup-gnome-2.52.2... | | `-- Installing glib-networking-2.46.1_1... | | | `-- Installing libproxy-0.4.12... | | | `-- Extracting libproxy-0.4.12: ........ done | | | `-- Installing gsettings-desktop-schemas-3.18.1... | | | `-- Installing cantarell-fonts-0.0.24... | | | `-- Extracting cantarell-fonts-0.0.24: ...... done | | | `-- Extracting gsettings-desktop-schemas-3.18.1: .......... done | | `-- Extracting glib-networking-2.46.1_1: .......... done | | `-- Installing libsoup-2.52.2... | | `-- Extracting libsoup-2.52.2: .......... done | | `-- Extracting libsoup-gnome-2.52.2: ......... done | `-- Extracting gvfs-1.26.3_2: .......... done | `-- Installing libgnome-keyring-3.12.0_2... | `-- Extracting libgnome-keyring-3.12.0_2: .......... done `-- Extracting libgnomeui-2.24.4_5: .......... done Extracting py27-gnome-2.28.1_6: .......... done Message from esound-0.2.41_3: The ESounD daemon (esd) must be started on a per-user basis. This is typically done by the Session Manager in GNOME. However, if you are not using the GNOME Desktop, you will need to add something like the following to your X Windows initialization script: esd -terminate -nobeeps -as 2 Message from gamin-0.1.10_8: =============================================================================== Gamin will only provide realtime notification of changes for at most n files, where n is the minimum value between (kern.maxfiles * 0.7) and (kern.maxfilesperproc - 200). Beyond that limit, files will be polled. If you often open several large folders with Nautilus, you might want to increase the kern.maxfiles tunable (you do not need to set kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles). For a typical desktop, add the following line to /boot/loader.conf, then reboot the system: kern.maxfiles="25000" The behavior of gamin can be controlled via the various gaminrc files. See http://www.gnome.org/~veillard/gamin/config.html on how to create these files. In particular, if you find gam_server is taking up too much CPU time polling for changes, something like the following may help in one of the gaminrc files: # reduce polling frequency to once per 10 seconds # for UFS file systems in order to lower CPU load fsset ufs poll 10 =============================================================================== ===> NOTICE: The gamin port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from samba36-libsmbclient-3.6.25_2: ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: not supported by the upstream. It is scheduled to be removed on or after 2016-04-01. ===> guake-0.8.4 depends on file: /usr/local/libdata/pkgconfig/gnome-python-2.0.pc - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on executable: pygobject-codegen-2.0 - found ===> guake-0.8.4 depends on file: /usr/local/libdata/pkgconfig/pygtk-2.0.pc - found =========================================================================== =================================================== ===> guake-0.8.4 depends on shared library: libintl.so - found (/usr/local/lib/libintl.so) ===> guake-0.8.4 depends on shared library: libatk-1.0.so - found (/usr/local/lib/libatk-1.0.so) ===> guake-0.8.4 depends on shared library: libesd.so - found (/usr/local/lib/libesd.so) ===> guake-0.8.4 depends on shared library: libgconf-2.so - found (/usr/local/lib/libgconf-2.so) ===> guake-0.8.4 depends on shared library: libgdk_pixbuf-2.0.so - found (/usr/local/lib/libgdk_pixbuf-2.0.so) ===> guake-0.8.4 depends on shared library: libglib-2.0.so - found (/usr/local/lib/libglib-2.0.so) ===> guake-0.8.4 depends on shared library: libgnomevfs-2.so - found (/usr/local/lib/libgnomevfs-2.so) ===> guake-0.8.4 depends on shared library: libgtk-x11-2.0.so - found (/usr/local/lib/libgtk-x11-2.0.so) ===> guake-0.8.4 depends on shared library: libart_lgpl_2.so - found (/usr/local/lib/libart_lgpl_2.so) ===> guake-0.8.4 depends on shared library: libbonobo-2.so - found (/usr/local/lib/libbonobo-2.so) ===> guake-0.8.4 depends on shared library: libbonoboui-2.so - found (/usr/local/lib/libbonoboui-2.so) ===> guake-0.8.4 depends on shared library: libglade-2.0.so - found (/usr/local/lib/libglade-2.0.so) ===> guake-0.8.4 depends on shared library: libgnome-2.so - found (/usr/local/lib/libgnome-2.so) ===> guake-0.8.4 depends on shared library: libgnomecanvas-2.so - found (/usr/local/lib/libgnomecanvas-2.so) ===> guake-0.8.4 depends on shared library: libgnomeui-2.so - found (/usr/local/lib/libgnomeui-2.so) ===> guake-0.8.4 depends on shared library: libIDL-2.so - found (/usr/local/lib/libIDL-2.so) ===> guake-0.8.4 depends on shared library: libxml2.so - found (/usr/local/lib/libxml2.so) ===> guake-0.8.4 depends on shared library: libORBit-2.so - found (/usr/local/lib/libORBit-2.so) ===> guake-0.8.4 depends on shared library: libpango-1.0.so - found (/usr/local/lib/libpango-1.0.so) =========================================================================== =================================================== ===> Configuring for guake-0.8.4 /usr/local/bin/gnome-autogen.sh ***Warning*** USE_GNOME2_MACROS is deprecated, you may remove it from autogen.sh ***Warning*** PKG_NAME is deprecated, you may remove it from autogen.sh checking for automake >= 1.9... testing automake... found 1.15 checking for autoreconf >= 2.53... testing autoreconf... found 2.69 checking for glib-gettext >= 2.2.0... testing glib-gettextize... found 2.46.2 checking for intltool >= 0.25... testing intltoolize... found 0.51.0 using pkgconf for pkg-config Checking for required M4 macros... **Warning**: I am going to run `configure' with no arguments. If you wish to pass any to it, please specify them on the `./autogen.sh' command line. Processing ./configure.ac Running glib-gettextize... Ignore non-fatal messages. Copying file po/Makefile.in.in Please add the files codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4 progtest.m4 from the /usr/local/share/aclocal directory to your autoconf macro directory or directly to your aclocal.m4 file. You will also need config.guess and config.sub, which you can get from ftp://ftp.gnu.org/pub/gnu/config/. Running intltoolize... Running autoreconf... autoreconf-2.69: Entering directory `.' autoreconf-2.69: configure.ac: not using Gettext autoreconf-2.69: running: aclocal --force --warnings=no-portability autoreconf-2.69: configure.ac: tracing autoreconf-2.69: running: libtoolize --copy --force libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. autoreconf-2.69: running: /usr/local/bin/autoconf-2.69 --force --warnings=no-portability autoreconf-2.69: running: /usr/local/bin/autoheader-2.69 --force --warnings=no-portability autoreconf-2.69: running: automake --add-missing --copy --force-missing --warnings=no-portability configure.ac:26: installing './compile' configure.ac:26: installing './config.guess' configure.ac:26: installing './config.sub' configure.ac:24: installing './install-sh' configure.ac:24: installing './missing' src/guake/Makefile.am:2: installing './py-compile' autoreconf-2.69: Leaving directory `.' Running ./configure ... configure: loading site script /usr/ports/Templates/config.site checking for a BSD-compatible install... (cached) /usr/bin/install checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether gmake sets $(MAKE)... yes checking whether gmake supports nested variables... yes checking build system type... x86_64-unknown-dragonfly4.7 checking host system type... x86_64-unknown-dragonfly4.7 checking how to print strings... printf checking for style of include used by gmake... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for fgrep... (cached) /usr/bin/fgrep checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... (cached) 262144 checking how to convert x86_64-unknown-dragonfly4.7 file names to x86_64-unknown-dragonfly4.7 format... func_convert_file_noop checking how to convert x86_64-unknown-dragonfly4.7 file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for dlfcn.h... (cached) yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly4.7 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) none checking whether NLS is requested... yes checking for intltool >= 0.35.0... 0.51.0 found checking for intltool-update... /usr/local/bin/intltool-update checking for intltool-merge... /usr/local/bin/intltool-merge checking for intltool-extract... /usr/local/bin/intltool-extract checking for xgettext... /usr/local/bin/xgettext checking for msgmerge... /usr/local/bin/msgmerge checking for msgfmt... /usr/local/bin/msgfmt checking for gmsgfmt... /usr/local/bin/msgfmt checking for perl... /usr/local/bin/perl checking for perl >= 5.8.1... 5.20.3 checking for XML::Parser... ok checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking libintl.h usability... no checking libintl.h presence... no checking for libintl.h... no checking whether /usr/local/bin/python2.7 version is >= 2.7... yes checking for /usr/local/bin/python2.7 version... 2.7 checking for /usr/local/bin/python2.7 platform... dragonfly4 checking for /usr/local/bin/python2.7 script directory... ${prefix}/lib/python2.7/site-packages checking for /usr/local/bin/python2.7 extension module directory... ${exec_prefix}/lib/python2.7/site-packages checking pkg-config is at least version 0.9.0... yes checking for DEPENDENCIES... yes checking for the python-vte package... yes checking for gconftool-2... /usr/local/bin/gconftool-2 Using config source xml:merged:/usr/local/etc/gconf/gconf.xml.defaults for schema installation Using $(sysconfdir)/gconf/schemas as install directory for schema files checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating data/Makefile config.status: creating data/guake.desktop config.status: creating data/guake-prefs.desktop config.status: creating data/org.guake.Guake.service config.status: creating data/pixmaps/Makefile config.status: creating data/icons/Makefile config.status: creating po/Makefile.in config.status: creating src/guake/Makefile config.status: creating src/guake/globals.py config.status: creating doc/src/conf.py config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing default-1 commands config.status: executing po/stamp-it commands Now type `make' to compile guake configure: loading site script /usr/ports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether gmake sets $(MAKE)... yes checking whether gmake supports nested variables... yes checking build system type... x86_64-portbld-dragonfly4.7 checking host system type... x86_64-portbld-dragonfly4.7 checking how to print strings... printf checking for style of include used by gmake... GNU checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking whether cc understands -c and -o together... yes checking dependency style of cc... none checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for fgrep... (cached) /usr/bin/fgrep checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... (cached) 262144 checking how to convert x86_64-portbld-dragonfly4.7 file names to x86_64-portbld-dragonfly4.7 format... func_convert_file_noop checking how to convert x86_64-portbld-dragonfly4.7 file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from cc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... cpp checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for dlfcn.h... (cached) yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly4.7 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ISO C89... (cached) none needed checking whether cc understands -c and -o together... (cached) yes checking dependency style of cc... (cached) none checking whether NLS is requested... yes checking for intltool >= 0.35.0... 0.51.0 found checking for intltool-update... /usr/local/bin/intltool-update checking for intltool-merge... /usr/local/bin/intltool-merge checking for intltool-extract... /usr/local/bin/intltool-extract checking for xgettext... /usr/local/bin/xgettext checking for msgmerge... /usr/local/bin/msgmerge checking for msgfmt... /usr/local/bin/msgfmt checking for gmsgfmt... /usr/local/bin/msgfmt checking for perl... /usr/local/bin/perl checking for perl >= 5.8.1... 5.20.3 checking for XML::Parser... ok checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for ngettext in libc... no checking for bindtextdomain in -lintl... yes checking for ngettext in -lintl... yes checking for dgettext in -lintl... yes checking for bind_textdomain_codeset... yes checking for msgfmt... (cached) /usr/local/bin/msgfmt checking for dcgettext... yes checking if msgfmt accepts -c... yes checking for gmsgfmt... (cached) /usr/local/bin/msgfmt checking for xgettext... (cached) /usr/local/bin/xgettext checking whether /usr/local/bin/python2.7 version is >= 2.7... yes checking for /usr/local/bin/python2.7 version... 2.7 checking for /usr/local/bin/python2.7 platform... dragonfly4 checking for /usr/local/bin/python2.7 script directory... ${prefix}/lib/python2.7/site-packages checking for /usr/local/bin/python2.7 extension module directory... ${exec_prefix}/lib/python2.7/site-packages checking pkg-config is at least version 0.9.0... yes checking for DEPENDENCIES... yes checking for the python-vte package... yes checking for gconftool-2... /usr/local/bin/gconftool-2 Using config source xml:merged:/usr/local/etc/gconf/gconf.xml.defaults for schema installation Using $(sysconfdir)/gconf/schemas as install directory for schema files checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating data/Makefile config.status: creating data/guake.desktop config.status: creating data/guake-prefs.desktop config.status: creating data/org.guake.Guake.service config.status: creating data/pixmaps/Makefile config.status: creating data/icons/Makefile config.status: creating po/Makefile.in config.status: creating src/guake/Makefile config.status: creating src/guake/globals.py config.status: creating doc/src/conf.py config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing default-1 commands config.status: executing po/stamp-it commands =========================================================================== =================================================== ===> Building for guake-0.8.4 gmake[1]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4' gmake all-recursive gmake[2]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4' Making all in src/guake gmake[3]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/src/guake' gmake[3]: Nothing to be done for 'all'. gmake[3]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/src/guake' Making all in data gmake[3]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/data' Making all in pixmaps gmake[4]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/data/pixmaps' gmake[4]: Nothing to be done for 'all'. gmake[4]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/data/pixmaps' Making all in icons gmake[4]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/data/icons' gmake[4]: Nothing to be done for 'all'. gmake[4]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/data/icons' gmake[4]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/data' gmake[4]: Nothing to be done for 'all-am'. gmake[4]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/data' gmake[3]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/data' Making all in po gmake[3]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/po' file=`echo ca | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file ca.po file=`echo cs | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file cs.po file=`echo de | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file de.po file=`echo el | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file el.po file=`echo es | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file es.po file=`echo fa | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file fa.po file=`echo fr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file fr.po file=`echo gl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file gl.po file=`echo hr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file hr.po file=`echo hu | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file hu.po file=`echo id | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file id.po file=`echo it | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file it.po file=`echo ja | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file ja.po file=`echo ko | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file ko.po file=`echo nb | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file nb.po file=`echo nl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file nl.po file=`echo pa | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file pa.po file=`echo pl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file pl.po file=`echo pt_BR | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file pt_BR.po file=`echo ru | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file ru.po file=`echo sv | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file sv.po file=`echo tr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file tr.po file=`echo uk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file uk.po file=`echo zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/local/bin/msgfmt -o $file zh_CN.po gmake[3]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/po' gmake[3]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4' gmake[3]: Nothing to be done for 'all-am'. gmake[3]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4' gmake[2]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4' gmake[1]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4' =========================================================================== =================================================== ===> guake-0.8.4 depends on package: keybinder>=0.3.0 - not found ===> Installing existing package /packages/All/keybinder-0.3.1.txz Installing keybinder-0.3.1... Extracting keybinder-0.3.1: .......... done Message from keybinder-0.3.1: ===> NOTICE: The keybinder port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> guake-0.8.4 depends on package: keybinder>=0.3.0 - found ===> Returning to build of guake-0.8.4 ===> guake-0.8.4 depends on package: py27-dbus>=0.84.0 - found ===> guake-0.8.4 depends on package: py27-notify>=0.1.1_9 - found ===> guake-0.8.4 depends on package: py27-vte>=0.26.2_1 - found ===> guake-0.8.4 depends on package: py27-xdg>=0.19 - found ===> guake-0.8.4 depends on executable: update-desktop-database - found ===> guake-0.8.4 depends on file: /usr/local/bin/python2.7 - found ===> guake-0.8.4 depends on executable: python2 - found ===> guake-0.8.4 depends on file: /usr/local/libdata/pkgconfig/gnome-mime-data-2.0.pc - found ===> guake-0.8.4 depends on executable: gtk-update-icon-cache - found ===> guake-0.8.4 depends on file: /usr/local/libdata/pkgconfig/gnome-python-2.0.pc - found ===> guake-0.8.4 depends on executable: pygobject-codegen-2.0 - found ===> guake-0.8.4 depends on file: /usr/local/libdata/pkgconfig/pygtk-2.0.pc - found ===> guake-0.8.4 depends on package: notify-osd>=0.9.29_4 - not found ===> Installing existing package /packages/All/notify-osd-0.9.29_8.txz Installing notify-osd-0.9.29_8... `-- Installing libwnck-2.30.7... | `-- Installing libXres-1.0.7_3... | `-- Extracting libXres-1.0.7_3: .......... done `-- Extracting libwnck-2.30.7: .......... done Extracting notify-osd-0.9.29_8: .......... done ===> guake-0.8.4 depends on package: notify-osd>=0.9.29_4 - found ===> Returning to build of guake-0.8.4 =========================================================================== =================================================== ===> Staging for guake-0.8.4 ===> Generating temporary packing list gmake[1]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4' Making install in src/guake gmake[2]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/src/guake' gmake[3]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/src/guake' /bin/mkdir -p '/wrkdirs/x11/guake/stage/usr/local/bin' install -m 555 guake guake-prefs '/wrkdirs/x11/guake/stage/usr/local/bin' /bin/mkdir -p '/wrkdirs/x11/guake/stage/usr/local/lib/python2.7/site-packages/guake' install -m 0644 __init__.py __main__.py about.py common.py dbusiface.py gconfhandler.py globals.py guake_app.py guake_notebook.py main.py notifier.py prefs.py simplegladeapp.py terminal.py palettes.py '/wrkdirs/x11/guake/stage/usr/local/lib/python2.7/site-packages/guake' Byte-compiling python modules... __init__.py__main__.pyabout.pycommon.pydbusiface.pygconfhandler.pyglobals.pyguake_app.pyguake_notebook.pymain.pynotifier.pyprefs.pysimplegladeapp.pyterminal.pypalettes.py Byte-compiling python modules (optimized versions) ... __init__.py__main__.pyabout.pycommon.pydbusiface.pygconfhandler.pyglobals.pyguake_app.pyguake_notebook.pymain.pynotifier.pyprefs.pysimplegladeapp.pyterminal.pypalettes.py gmake[3]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/src/guake' gmake[2]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/src/guake' Making install in data gmake[2]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/data' Making install in pixmaps gmake[3]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/data/pixmaps' gmake[4]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/data/pixmaps' gmake[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/wrkdirs/x11/guake/stage/usr/local/share/pixmaps/guake' install -m 0644 guake.png guake-tray.svg guake-tray.png guake-notification.png add_tab.png quick-open.png '/wrkdirs/x11/guake/stage/usr/local/share/pixmaps/guake' gmake[4]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/data/pixmaps' gmake[3]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/data/pixmaps' Making install in icons gmake[3]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/data/icons' gmake[4]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/data/icons' gmake[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/wrkdirs/x11/guake/stage/usr/local/share/icons/hicolor/16x16/apps' install -m 0644 16x16/apps/guake.png 16x16/apps/guake-prefs.png '/wrkdirs/x11/guake/stage/usr/local/share/icons/hicolor/16x16/apps' /bin/mkdir -p '/wrkdirs/x11/guake/stage/usr/local/share/icons/hicolor/22x22/apps' install -m 0644 22x22/apps/guake.png 22x22/apps/guake-prefs.png '/wrkdirs/x11/guake/stage/usr/local/share/icons/hicolor/22x22/apps' /bin/mkdir -p '/wrkdirs/x11/guake/stage/usr/local/share/icons/hicolor/24x24/apps' install -m 0644 24x24/apps/guake.png 24x24/apps/guake-prefs.png '/wrkdirs/x11/guake/stage/usr/local/share/icons/hicolor/24x24/apps' /bin/mkdir -p '/wrkdirs/x11/guake/stage/usr/local/share/icons/hicolor/256x256/apps' install -m 0644 256x256/apps/guake.png 256x256/apps/guake-prefs.png '/wrkdirs/x11/guake/stage/usr/local/share/icons/hicolor/256x256/apps' /bin/mkdir -p '/wrkdirs/x11/guake/stage/usr/local/share/icons/hicolor/32x32/apps' install -m 0644 32x32/apps/guake.png 32x32/apps/guake-prefs.png '/wrkdirs/x11/guake/stage/usr/local/share/icons/hicolor/32x32/apps' /bin/mkdir -p '/wrkdirs/x11/guake/stage/usr/local/share/icons/hicolor/48x48/apps' install -m 0644 48x48/apps/guake.png 48x48/apps/guake-prefs.png '/wrkdirs/x11/guake/stage/usr/local/share/icons/hicolor/48x48/apps' gmake install-data-hook gmake[5]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/data/icons' : test -n "/wrkdirs/x11/guake/stage" || gtk-update-icon-cache --ignore-theme-index --force "/usr/local/share/icons/hicolor" gmake[5]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/data/icons' gmake[4]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/data/icons' gmake[3]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/data/icons' gmake[3]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/data' gmake[4]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/data' gmake[4]: Nothing to be done for 'install-exec-am'. GCONF_CONFIG_SOURCE=xml:merged:/usr/local/etc/gconf/gconf.xml.defaults \ /usr/local/bin/gconftool-2 --makefile-install-rule guake.schemas GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL is set, not installing schemas /bin/mkdir -p '/wrkdirs/x11/guake/stage/usr/local/share/applications' install -m 0644 guake.desktop guake-prefs.desktop '/wrkdirs/x11/guake/stage/usr/local/share/applications' /bin/mkdir -p '/wrkdirs/x11/guake/stage/usr/local/etc/gconf/schemas' install -m 0644 guake.schemas '/wrkdirs/x11/guake/stage/usr/local/etc/gconf/schemas' /bin/mkdir -p '/wrkdirs/x11/guake/stage/usr/local/share/dbus-1/services' install -m 0644 org.guake.Guake.service '/wrkdirs/x11/guake/stage/usr/local/share/dbus-1/services' /bin/mkdir -p '/wrkdirs/x11/guake/stage/usr/local/share/guake' install -m 0644 about.glade guake.glade prefs.glade '/wrkdirs/x11/guake/stage/usr/local/share/guake' gmake[4]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/data' gmake[3]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/data' gmake[2]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/data' Making install in po gmake[2]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4/po' linguas="ca cs de el es fa fr gl hr hu id it ja ko nb nl pa pl pt_BR ru sv tr uk zh_CN "; \ for lang in $linguas; do \ dir=/wrkdirs/x11/guake/stage/usr/local/share/locale/$lang/LC_MESSAGES; \ /bin/sh /wrkdirs/x11/guake/guake-0.8.4/install-sh -d $dir; \ if test -r $lang.gmo; then \ install -m 0644 $lang.gmo $dir/guake.mo; \ echo "installing $lang.gmo as $dir/guake.mo"; \ else \ install -m 0644 ./$lang.gmo $dir/guake.mo; \ echo "installing ./$lang.gmo as" \ "$dir/guake.mo"; \ fi; \ if test -r $lang.gmo.m; then \ install -m 0644 $lang.gmo.m $dir/guake.mo.m; \ echo "installing $lang.gmo.m as $dir/guake.mo.m"; \ else \ if test -r ./$lang.gmo.m ; then \ install -m 0644 ./$lang.gmo.m \ $dir/guake.mo.m; \ echo "installing ./$lang.gmo.m as" \ "$dir/guake.mo.m"; \ else \ true; \ fi; \ fi; \ done installing ca.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/ca/LC_MESSAGES/guake.mo installing cs.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/cs/LC_MESSAGES/guake.mo installing de.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/de/LC_MESSAGES/guake.mo installing el.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/el/LC_MESSAGES/guake.mo installing es.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/es/LC_MESSAGES/guake.mo installing fa.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/fa/LC_MESSAGES/guake.mo installing fr.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/fr/LC_MESSAGES/guake.mo installing gl.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/gl/LC_MESSAGES/guake.mo installing hr.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/hr/LC_MESSAGES/guake.mo installing hu.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/hu/LC_MESSAGES/guake.mo installing id.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/id/LC_MESSAGES/guake.mo installing it.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/it/LC_MESSAGES/guake.mo installing ja.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/ja/LC_MESSAGES/guake.mo installing ko.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/ko/LC_MESSAGES/guake.mo installing nb.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/nb/LC_MESSAGES/guake.mo installing nl.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/nl/LC_MESSAGES/guake.mo installing pa.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/pa/LC_MESSAGES/guake.mo installing pl.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/pl/LC_MESSAGES/guake.mo installing pt_BR.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/pt_BR/LC_MESSAGES/guake.mo installing ru.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/ru/LC_MESSAGES/guake.mo installing sv.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/sv/LC_MESSAGES/guake.mo installing tr.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/tr/LC_MESSAGES/guake.mo installing uk.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/uk/LC_MESSAGES/guake.mo installing zh_CN.gmo as /wrkdirs/x11/guake/stage/usr/local/share/locale/zh_CN/LC_MESSAGES/guake.mo gmake[2]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4/po' gmake[2]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4' gmake[3]: Entering directory '/wrkdirs/x11/guake/guake-0.8.4' gmake[3]: Nothing to be done for 'install-exec-am'. gmake[3]: Nothing to be done for 'install-data-am'. gmake[3]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4' gmake[2]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4' gmake[1]: Leaving directory '/wrkdirs/x11/guake/guake-0.8.4' ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for guake-0.8.4 file sizes/checksums [99]: . done packing files [99]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for guake-0.8.4 build of x11/guake ended at Wed Oct 5 18:38:39 PDT 2016 build time: 00:01:54