=> Building x11-themes/gtk-equinox-engine build started at Wed Oct 5 18:15:05 PDT 2016 port directory: /usr/ports/x11-themes/gtk-equinox-engine building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: ports@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../09//usr/ports/x11-themes/gtk-equinox-engine/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=gtk-equinox-engine-1.50_3 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ===> The following configuration options are available for gtk-equinox-engine-1.50_3: ANIMATION=on: Enable animation support DOCS=on: Build and/or install documentation EXAMPLES=on: Build and/or install examples ===> Use 'make config' to modify these settings ---End OPTIONS List--- --CONFIGURE_ARGS-- --enable-animation --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- PKG_CONFIG=pkgconf XDG_DATA_HOME=/wrkdirs/x11-themes/gtk-equinox-engine XDG_CONFIG_HOME=/wrkdirs/x11-themes/gtk-equinox-engine HOME=/wrkdirs/x11-themes/gtk-equinox-engine TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/x11-themes/gtk-equinox-engine XDG_CONFIG_HOME=/wrkdirs/x11-themes/gtk-equinox-engine HOME=/wrkdirs/x11-themes/gtk-equinox-engine TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- GTK2_VERSION="2.10.0" GTK3_VERSION="3.0.0" OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/equinox" EXAMPLESDIR="share/examples/equinox" DATADIR="share/themes" WWWDIR="www/equinox" ETCDIR="etc/equinox" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/themes DOCSDIR=/usr/local/share/doc/equinox EXAMPLESDIR=/usr/local/share/examples/equinox WWWDIR=/usr/local/www/equinox ETCDIR=/usr/local/etc/equinox --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== ===> NOTICE: The equinox port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port =========================================================================== =================================================== ===> gtk-equinox-engine-1.50_3 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> gtk-equinox-engine-1.50_3 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of gtk-equinox-engine-1.50_3 =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The equinox port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port => 121881-equinox-1.50.tar.gz doesn't seem to exist in /portdistfiles/. => Attempting to fetch http://gnome-look.org/CONTENT/content-files/121881-equinox-1.50.tar.gz fetch: http://gnome-look.org/CONTENT/content-files/121881-equinox-1.50.tar.gz: Forbidden => Attempting to fetch http://distcache.FreeBSD.org/ports-distfiles/121881-equinox-1.50.tar.gz 121881-equinox-1.50.tar.gz 352 kB 0 Bps => 140449-equinox-themes-1.50.tar.gz doesn't seem to exist in /portdistfiles/. => Attempting to fetch http://gnome-look.org/CONTENT/content-files/140449-equinox-themes-1.50.tar.gz fetch: http://gnome-look.org/CONTENT/content-files/140449-equinox-themes-1.50.tar.gz: Forbidden => Attempting to fetch http://distcache.FreeBSD.org/ports-distfiles/140449-equinox-themes-1.50.tar.gz 140449-equinox-themes-1.50.tar.gz 495 kB 0 Bps ===> Fetching all distfiles required by gtk-equinox-engine-1.50_3 for building =========================================================================== =================================================== ===> NOTICE: The equinox port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> Fetching all distfiles required by gtk-equinox-engine-1.50_3 for building => SHA256 Checksum OK for 121881-equinox-1.50.tar.gz. => SHA256 Checksum OK for 140449-equinox-themes-1.50.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The equinox port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> Fetching all distfiles required by gtk-equinox-engine-1.50_3 for building ===> Extracting for gtk-equinox-engine-1.50_3 => SHA256 Checksum OK for 121881-equinox-1.50.tar.gz. => SHA256 Checksum OK for 140449-equinox-themes-1.50.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for gtk-equinox-engine-1.50_3 =========================================================================== =================================================== ===> gtk-equinox-engine-1.50_3 depends on file: /usr/local/libdata/pkgconfig/gtk-engines-2.pc - not found ===> Installing existing package /packages/All/gtk-engines2-2.20.2_2.txz Installing gtk-engines2-2.20.2_2... `-- Installing atk-2.18.0... | `-- Installing gettext-runtime-0.19.8.1... | | `-- Installing indexinfo-0.2.5... | | `-- Extracting indexinfo-0.2.5: .... done | `-- Extracting gettext-runtime-0.19.8.1: .......... done | `-- Installing glib-2.46.2_3... | | `-- Installing libiconv-1.14_9... | | `-- Extracting libiconv-1.14_9: .......... done | | `-- Installing python27-2.7.12... | | `-- Installing expat-2.2.0... | | `-- Extracting expat-2.2.0: .......... done | | `-- Installing readline-6.3.8... | | | `-- Installing ncurses-6.0_5... | | | `-- Extracting ncurses-6.0_5: .......... done | | `-- Extracting readline-6.3.8: .......... done | | `-- Installing libffi-3.2.1... | | `-- Extracting libffi-3.2.1: .......... done | | `-- Installing libressl-2.4.3... | | `-- Extracting libressl-2.4.3: .......... done | | `-- Extracting python27-2.7.12: .......... done | | `-- Installing pcre-8.39... | | `-- Extracting pcre-8.39: .......... done | | `-- Installing perl5-5.20.3_15... | | `-- Extracting perl5-5.20.3_15: .......... done | `-- Extracting glib-2.46.2_3: .......... done No schema files found: doing nothing. `-- Extracting atk-2.18.0: .......... done `-- Installing gtk2-2.24.29_2... | `-- Installing hicolor-icon-theme-0.15... | `-- Extracting hicolor-icon-theme-0.15: . done | `-- Installing libXdamage-1.1.4_3... | | `-- Installing libXfixes-5.0.1_3... | | `-- Installing xproto-7.0.28... | | `-- Extracting xproto-7.0.28: .......... done | | `-- Installing fixesproto-5.0... | | `-- Extracting fixesproto-5.0: .... done | | `-- Installing libX11-1.6.3,1... | | | `-- Installing kbproto-1.0.7... | | | `-- Extracting kbproto-1.0.7: .......... done | | | `-- Installing libXdmcp-1.1.2... | | | `-- Extracting libXdmcp-1.1.2: ......... done | | | `-- Installing libxcb-1.11.1... | | | `-- Installing libxml2-2.9.4... | | | `-- Extracting libxml2-2.9.4: .......... done | | | `-- Installing libpthread-stubs-0.3_6... | | | `-- Extracting libpthread-stubs-0.3_6: ..... done | | | `-- Installing libXau-1.0.8_3... | | | `-- Extracting libXau-1.0.8_3: .......... done | | | `-- Extracting libxcb-1.11.1: .......... done | | `-- Extracting libX11-1.6.3,1: .......... done | | `-- Extracting libXfixes-5.0.1_3: .......... done | | `-- Installing damageproto-1.2.1... | | `-- Extracting damageproto-1.2.1: .... done | `-- Extracting libXdamage-1.1.4_3: ...... done | `-- Installing gtk-update-icon-cache-2.24.29... | | `-- Installing pango-1.38.0_1... | | `-- Installing encodings-1.0.4_3,1... | | | `-- Installing font-util-1.3.1... | | | `-- Extracting font-util-1.3.1: .......... done | | `-- Extracting encodings-1.0.4_3,1: .......... done | | `-- Installing fontconfig-2.12.1,1... | | | `-- Installing freetype2-2.6.3... | | | `-- Extracting freetype2-2.6.3: .......... done | | `-- Extracting fontconfig-2.12.1,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: caching, new cache contents: 0 fonts, 2 dirs /usr/local/share/fonts/encodings: caching, new cache contents: 0 fonts, 1 dirs /usr/local/share/fonts/encodings/large: caching, new cache contents: 0 fonts, 0 dirs /usr/local/share/fonts/util: caching, new cache contents: 0 fonts, 0 dirs /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | | `-- Installing libXft-2.3.2_1... | | | `-- Installing libXrender-0.9.9... | | | `-- Installing renderproto-0.11.1... | | | `-- Extracting renderproto-0.11.1: .... done | | | `-- Extracting libXrender-0.9.9: .......... done | | `-- Extracting libXft-2.3.2_1: ......... done | | `-- Installing harfbuzz-1.3.2... | | | `-- Installing cairo-1.14.6_1,2... | | | `-- Installing glproto-1.4.17... | | | `-- Extracting glproto-1.4.17: ...... done | | | `-- Installing libEGL-11.2.2... | | | | `-- Installing libdevq-0.0.2_1... | | | | `-- Extracting libdevq-0.0.2_1: ....... done | | | | `-- Installing libxshmfence-1.2... | | | | `-- Extracting libxshmfence-1.2: ......... done | | | | `-- Installing libXext-1.3.3_1,1... | | | | `-- Installing xextproto-7.3.0... | | | | `-- Extracting xextproto-7.3.0: .......... done | | | | `-- Extracting libXext-1.3.3_1,1: .......... done | | | | `-- Installing gbm-11.2.2... | | | | `-- Installing libglapi-11.2.2... | | | | | `-- Installing libXvMC-1.0.9... | | | | | `-- Installing libXv-1.0.10_3,1... | | | | | | `-- Installing videoproto-2.3.2... | | | | | | `-- Extracting videoproto-2.3.2: ...... done | | | | | `-- Extracting libXv-1.0.10_3,1: .......... done | | | | | `-- Extracting libXvMC-1.0.9: .......... done | | | | | `-- Installing libdrm-2.4.66,1... | | | | | `-- Installing libpciaccess-0.13.4... | | | | | | `-- Installing pciids-20160621... | | | | | | `-- Extracting pciids-20160621: ..... done | | | | | `-- Extracting libpciaccess-0.13.4: ...... done | | | | | `-- Extracting libdrm-2.4.66,1: .......... done | | | | | `-- Installing libelf-0.8.13_1... | | | | | `-- Extracting libelf-0.8.13_1: .......... done | | | | `-- Extracting libglapi-11.2.2: ... done | | | | `-- Extracting gbm-11.2.2: ..... done | | | | `-- Installing llvm37-3.7.1_3... | | | | `-- Installing libedit-3.1.20150325_2,1... | | | | `-- Extracting libedit-3.1.20150325_2,1: .......... done | | | | `-- Extracting llvm37-3.7.1_3: .......... done | | | `-- Extracting libEGL-11.2.2: .......... done | | | `-- Installing libGL-11.2.2... | | | | `-- Installing dri2proto-2.8... | | | | `-- Extracting dri2proto-2.8: .... done | | | | `-- Installing libXxf86vm-1.1.4_1... | | | | `-- Installing xf86vidmodeproto-2.3.1... | | | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | | | `-- Extracting libGL-11.2.2: .......... done | | | `-- Installing xcb-util-renderutil-0.3.9_1... | | | | `-- Installing xcb-util-0.4.0_1,1... | | | | `-- Extracting xcb-util-0.4.0_1,1: .......... done | | | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done | | | `-- Installing png-1.6.23... | | | `-- Extracting png-1.6.23: .......... done | | | `-- Installing pixman-0.34.0... | | | `-- Extracting pixman-0.34.0: .......... done | | | `-- Extracting cairo-1.14.6_1,2: .......... done | | | `-- Installing icu-57.1,1... | | | `-- Extracting icu-57.1,1: .......... done | | | `-- Installing graphite2-1.3.8... | | | `-- Extracting graphite2-1.3.8: .......... done | | `-- Extracting harfbuzz-1.3.2: .......... done | | `-- Installing xorg-fonts-truetype-7.7_1... | | | `-- Installing font-misc-meltho-1.0.3_3... | | | `-- Installing mkfontdir-1.0.7... | | | | `-- Installing mkfontscale-1.1.2... | | | | `-- Installing libfontenc-1.1.3... | | | | `-- Extracting libfontenc-1.1.3: ...... done | | | | `-- Extracting mkfontscale-1.1.2: .. done | | | `-- Extracting mkfontdir-1.0.7: .. done | | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done | | | `-- Installing font-bh-ttf-1.0.3_3... | | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | | `-- Installing font-misc-ethiopic-1.0.3_3... | | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | | `-- Installing dejavu-2.35... | | | `-- Extracting dejavu-2.35: .......... done | | `-- Extracting pango-1.38.0_1: .......... done | | `-- Installing libXcursor-1.1.14_3... | | `-- Extracting libXcursor-1.1.14_3: .......... done | | `-- Installing libXinerama-1.1.3_3,1... | | `-- Installing xineramaproto-1.2.1... | | `-- Extracting xineramaproto-1.2.1: .. done | | `-- Extracting libXinerama-1.1.3_3,1: .......... done | | `-- Installing libXcomposite-0.4.4_3,1... | | `-- Installing compositeproto-0.4.2... | | `-- Extracting compositeproto-0.4.2: .... done | | `-- Extracting libXcomposite-0.4.4_3,1: .......... done | | `-- Installing libXi-1.7.6,1... | | `-- Installing inputproto-2.3.1... | | `-- Extracting inputproto-2.3.1: ..... done | | `-- Extracting libXi-1.7.6,1: .......... done | | `-- Installing libXrandr-1.5.0... | | `-- Installing randrproto-1.5.0... | | `-- Extracting randrproto-1.5.0: .... done | | `-- Extracting libXrandr-1.5.0: .......... done | | `-- Installing gdk-pixbuf2-2.32.3_1... | | `-- Installing jasper-1.900.1_16... | | | `-- Installing jpeg-turbo-1.4.2... | | | `-- Extracting jpeg-turbo-1.4.2: .......... done | | `-- Extracting jasper-1.900.1_16: .......... done | | `-- Installing libXt-1.1.5,1... | | | `-- Installing libSM-1.2.2_3,1... | | | `-- Installing libICE-1.0.9_1,1... | | | `-- Extracting libICE-1.0.9_1,1: .......... done | | | `-- Extracting libSM-1.2.2_3,1: .......... done | | `-- Extracting libXt-1.1.5,1: .......... done | | `-- Installing tiff-4.0.6_2... | | | `-- Installing jbigkit-2.1_1... | | | `-- Extracting jbigkit-2.1_1: .......... done | | `-- Extracting tiff-4.0.6_2: .......... done | | `-- Extracting gdk-pixbuf2-2.32.3_1: .......... done | | `-- Installing shared-mime-info-1.5... | | `-- Extracting shared-mime-info-1.5: .......... done | `-- Extracting gtk-update-icon-cache-2.24.29: .... done | `-- Installing cups-2.1.4... | | `-- Installing avahi-app-0.6.31_5... | | `-- Installing gnome_subr-1.0... | | `-- Extracting gnome_subr-1.0: . done | | `-- Installing gobject-introspection-1.46.0... | | | `-- Installing python2-2_3... | | | `-- Extracting python2-2_3: ...... done | | `-- Extracting gobject-introspection-1.46.0: .......... done | | `-- Installing gdbm-1.12... | | `-- Extracting gdbm-1.12: .......... done | | `-- Installing libdaemon-0.14_1... | | `-- Extracting libdaemon-0.14_1: .......... done | | `-- Installing dbus-glib-0.104... | | | `-- Installing dbus-1.8.20... ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | | | `-- Extracting dbus-1.8.20: ......... done | | `-- Extracting dbus-glib-0.104: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. | | `-- Extracting avahi-app-0.6.31_5: .......... done | | `-- Installing gnutls-3.4.15... | | `-- Installing nettle-3.2... | | | `-- Installing gmp-5.1.3_3... | | | `-- Extracting gmp-5.1.3_3: .......... done | | `-- Extracting nettle-3.2: .......... done | | `-- Installing ca_root_nss-3.27... | | `-- Extracting ca_root_nss-3.27: ....... done | | `-- Installing libtasn1-4.9... | | `-- Extracting libtasn1-4.9: .......... done | | `-- Installing trousers-0.3.13_1... | | | `-- Installing tpm-emulator-0.7.4_1... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. | | | `-- Extracting tpm-emulator-0.7.4_1: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting trousers-0.3.13_1: .......... done | | `-- Installing p11-kit-0.23.2... | | `-- Extracting p11-kit-0.23.2: .......... done | | `-- Installing libidn-1.33_1... | | `-- Extracting libidn-1.33_1: .......... done | | `-- Extracting gnutls-3.4.15: .......... done | | `-- Installing libpaper-1.1.24.4... | | `-- Extracting libpaper-1.1.24.4: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. | `-- Extracting cups-2.1.4: .......... done | `-- Installing python-2.7_2,2... | `-- Extracting python-2.7_2,2: ..... done `-- Extracting gtk2-2.24.29_2: .......... done Extracting gtk-engines2-2.20.2_2: .......... done Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from python27-2.7.12: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== Message from perl5-5.20.3_15: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Message from dejavu-2.35: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.13_1: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account ===> gtk-equinox-engine-1.50_3 depends on file: /usr/local/libdata/pkgconfig/gtk-engines-2.pc - found ===> Returning to build of gtk-equinox-engine-1.50_3 ===> gtk-equinox-engine-1.50_3 depends on package: pkgconf>=0.9.10 - not found ===> Installing existing package /packages/All/pkgconf-1.0.1.txz Installing pkgconf-1.0.1... Extracting pkgconf-1.0.1: .......... done ===> gtk-equinox-engine-1.50_3 depends on package: pkgconf>=0.9.10 - found ===> Returning to build of gtk-equinox-engine-1.50_3 =========================================================================== =================================================== ===> gtk-equinox-engine-1.50_3 depends on shared library: libatk-1.0.so - found (/usr/local/lib/libatk-1.0.so) ===> gtk-equinox-engine-1.50_3 depends on shared library: libglib-2.0.so - found (/usr/local/lib/libglib-2.0.so) ===> gtk-equinox-engine-1.50_3 depends on shared library: libgtk-x11-2.0.so - found (/usr/local/lib/libgtk-x11-2.0.so) ===> gtk-equinox-engine-1.50_3 depends on shared library: libpango-1.0.so - found (/usr/local/lib/libpango-1.0.so) =========================================================================== =================================================== ===> Configuring for gtk-equinox-engine-1.50_3 configure: loading site script /usr/ports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking for gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ISO C89... (cached) none needed checking dependency style of cc... (cached) gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking whether make sets $(MAKE)... (cached) yes checking build system type... x86_64-portbld-dragonfly4.7 checking host system type... x86_64-portbld-dragonfly4.7 checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cpp checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for dlfcn.h... (cached) yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse /usr/bin/nm -B output from cc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly4.7 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly4.7 ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking pkg-config is at least version 0.9.0... yes checking for GTK... yes configure: creating ./config.status config.status: creating Makefile config.status: creating equinox.pc config.status: creating src/config.h config.status: executing depfiles commands Now run make. =========================================================================== =================================================== ===> Building for gtk-equinox-engine-1.50_3 --- equinox_rc_style.lo --- --- equinox_style.lo --- --- equinox_theme_main.lo --- --- support.lo --- --- animation.lo --- --- equinox_rc_style.lo --- /bin/sh ./libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I./src -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -pipe -O2 -fno-strict-aliasing -MT equinox_rc_style.lo -MD -MP -MF .deps/equinox_rc_style.Tpo -c -o equinox_rc_style.lo `test -f './src/equinox_rc_style.c' || echo './'`./src/equinox_rc_style.c --- equinox_style.lo --- /bin/sh ./libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I./src -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -pipe -O2 -fno-strict-aliasing -MT equinox_style.lo -MD -MP -MF .deps/equinox_style.Tpo -c -o equinox_style.lo `test -f './src/equinox_style.c' || echo './'`./src/equinox_style.c --- support.lo --- /bin/sh ./libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I./src -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -pipe -O2 -fno-strict-aliasing -MT support.lo -MD -MP -MF .deps/support.Tpo -c -o support.lo `test -f './src/support.c' || echo './'`./src/support.c --- animation.lo --- /bin/sh ./libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I./src -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -pipe -O2 -fno-strict-aliasing -MT animation.lo -MD -MP -MF .deps/animation.Tpo -c -o animation.lo `test -f './src/animation.c' || echo './'`./src/animation.c --- equinox_theme_main.lo --- /bin/sh ./libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I./src -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -pipe -O2 -fno-strict-aliasing -MT equinox_theme_main.lo -MD -MP -MF .deps/equinox_theme_main.Tpo -c -o equinox_theme_main.lo `test -f './src/equinox_theme_main.c' || echo './'`./src/equinox_theme_main.c --- equinox_rc_style.lo --- mkdir .libs cc -DHAVE_CONFIG_H -I. -I./src -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -pipe -O2 -fno-strict-aliasing -MT equinox_rc_style.lo -MD -MP -MF .deps/equinox_rc_style.Tpo -c ./src/equinox_rc_style.c -fPIC -DPIC -o .libs/equinox_rc_style.o --- animation.lo --- cc -DHAVE_CONFIG_H -I. -I./src -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -pipe -O2 -fno-strict-aliasing -MT animation.lo -MD -MP -MF .deps/animation.Tpo -c ./src/animation.c -fPIC -DPIC -o .libs/animation.o --- equinox_style.lo --- cc -DHAVE_CONFIG_H -I. -I./src -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -pipe -O2 -fno-strict-aliasing -MT equinox_style.lo -MD -MP -MF .deps/equinox_style.Tpo -c ./src/equinox_style.c -fPIC -DPIC -o .libs/equinox_style.o --- support.lo --- cc -DHAVE_CONFIG_H -I. -I./src -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -pipe -O2 -fno-strict-aliasing -MT support.lo -MD -MP -MF .deps/support.Tpo -c ./src/support.c -fPIC -DPIC -o .libs/support.o --- equinox_theme_main.lo --- cc -DHAVE_CONFIG_H -I. -I./src -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -pipe -O2 -fno-strict-aliasing -MT equinox_theme_main.lo -MD -MP -MF .deps/equinox_theme_main.Tpo -c ./src/equinox_theme_main.c -fPIC -DPIC -o .libs/equinox_theme_main.o --- animation.lo --- mv -f .deps/animation.Tpo .deps/animation.Plo --- equinox_draw.lo --- /bin/sh ./libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I./src -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -pipe -O2 -fno-strict-aliasing -MT equinox_draw.lo -MD -MP -MF .deps/equinox_draw.Tpo -c -o equinox_draw.lo `test -f './src/equinox_draw.c' || echo './'`./src/equinox_draw.c --- equinox_rc_style.lo --- mv -f .deps/equinox_rc_style.Tpo .deps/equinox_rc_style.Plo --- equinox_theme_main.lo --- mv -f .deps/equinox_theme_main.Tpo .deps/equinox_theme_main.Plo --- support.lo --- mv -f .deps/support.Tpo .deps/support.Plo --- equinox_draw.lo --- cc -DHAVE_CONFIG_H -I. -I./src -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -pipe -O2 -fno-strict-aliasing -MT equinox_draw.lo -MD -MP -MF .deps/equinox_draw.Tpo -c ./src/equinox_draw.c -fPIC -DPIC -o .libs/equinox_draw.o ./src/equinox_draw.c:10:0: warning: "M_PI" redefined #define M_PI 3.14159265358979323846 ^ In file included from ./src/support.h:5:0, from ./src/equinox_draw.c:5: /usr/include/math.h:138:0: note: this is the location of the previous definition #define M_PI ((double)3.14159265358979323846) /* pi */ ^ --- equinox_style.lo --- mv -f .deps/equinox_style.Tpo .deps/equinox_style.Plo --- equinox_draw.lo --- mv -f .deps/equinox_draw.Tpo .deps/equinox_draw.Plo --- libequinox.la --- /bin/sh ./libtool --tag=CC --mode=link cc -pipe -O2 -fno-strict-aliasing -module -avoid-version -no-undefined -o libequinox.la -rpath /usr/local/lib/gtk-2.0/2.10.0/engines equinox_rc_style.lo equinox_style.lo equinox_theme_main.lo support.lo animation.lo equinox_draw.lo -L/usr/local/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lpthread -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lintl -lfontconfig -lfreetype cc -shared .libs/equinox_rc_style.o .libs/equinox_style.o .libs/equinox_theme_main.o .libs/support.o .libs/animation.o .libs/equinox_draw.o -L/usr/local/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lpthread -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lintl -lfontconfig -lfreetype -Wl,-soname -Wl,libequinox.so -o .libs/libequinox.so creating libequinox.la (cd .libs && rm -f libequinox.la && ln -s ../libequinox.la libequinox.la) =========================================================================== =================================================== ===> gtk-equinox-engine-1.50_3 depends on file: /usr/local/libdata/pkgconfig/gtk-engines-2.pc - found ===> gtk-equinox-engine-1.50_3 depends on file: /usr/local/share/icons/Faenza/index.theme - not found ===> Installing existing package /packages/All/gnome-icons-faenza-1.3.1.txz Installing gnome-icons-faenza-1.3.1... Extracting gnome-icons-faenza-1.3.1: .......... done ===> gtk-equinox-engine-1.50_3 depends on file: /usr/local/share/icons/Faenza/index.theme - found ===> Returning to build of gtk-equinox-engine-1.50_3 =========================================================================== =================================================== ===> Staging for gtk-equinox-engine-1.50_3 ===> Generating temporary packing list /usr/bin/make INSTALL_PROGRAM="/bin/sh /wrkdirs/x11-themes/gtk-equinox-engine/equinox-1.50/install-sh -c -s" install_sh_PROGRAM="/bin/sh /wrkdirs/x11-themes/gtk-equinox-engine/equinox-1.50/install-sh -c -s" INSTALL_STRIP_FLAG=-s `test -z 'strip' || echo "INSTALL_PROGRAM_ENV=STRIPPROG='strip'"` install test -z "/usr/local/lib/gtk-2.0/2.10.0/engines" || /bin/mkdir -p "/wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/lib/gtk-2.0/2.10.0/engines" /bin/sh ./libtool --mode=install /usr/bin/install -c -s 'libequinox.la' '/wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/lib/gtk-2.0/2.10.0/engines/libequinox.la' /usr/bin/install -c .libs/libequinox.so /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/lib/gtk-2.0/2.10.0/engines/libequinox.so strip --strip-unneeded /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/lib/gtk-2.0/2.10.0/engines/libequinox.so /usr/bin/install -c .libs/libequinox.lai /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/lib/gtk-2.0/2.10.0/engines/libequinox.la libtool: install: warning: remember to run `libtool --finish /usr/local/lib/gtk-2.0/2.10.0/engines' /bin/cp -R /wrkdirs/x11-themes/gtk-equinox-engine/"Equinox Evolution" /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/themes /bin/cp -R /wrkdirs/x11-themes/gtk-equinox-engine/"Equinox Evolution Dawn" /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/themes /bin/cp -R /wrkdirs/x11-themes/gtk-equinox-engine/"Equinox Evolution Dawn" /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/themes /bin/cp -R /wrkdirs/x11-themes/gtk-equinox-engine/"Equinox Evolution Dusk" /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/themes /bin/cp -R /wrkdirs/x11-themes/gtk-equinox-engine/"Equinox Evolution Light" /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/themes /bin/cp -R /wrkdirs/x11-themes/gtk-equinox-engine/"Equinox Evolution Midnight" /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/themes /bin/cp -R /wrkdirs/x11-themes/gtk-equinox-engine/"Equinox Evolution Rounded" /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/themes /bin/cp -R /wrkdirs/x11-themes/gtk-equinox-engine/"Equinox Evolution Squared" /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/themes /usr/bin/find /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/themes -type d -exec /bin/chmod 755 {} + /usr/bin/find /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/themes -type f -exec /bin/chmod 444 {} + /bin/mkdir -p /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/doc/equinox install -m 0644 /wrkdirs/x11-themes/gtk-equinox-engine/equinox-1.50/README /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/doc/equinox /bin/mkdir -p /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/examples/equinox install -m 0644 /wrkdirs/x11-themes/gtk-equinox-engine/"Equinox Evolution.crx" /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/examples/equinox install -m 0644 /wrkdirs/x11-themes/gtk-equinox-engine/"Equinox Evolution Dawn.crx" /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/examples/equinox install -m 0644 /wrkdirs/x11-themes/gtk-equinox-engine/"Equinox Evolution Dusk.crx" /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/examples/equinox install -m 0644 /wrkdirs/x11-themes/gtk-equinox-engine/"Equinox Evolution Midnight.crx" /wrkdirs/x11-themes/gtk-equinox-engine/stage/usr/local/share/examples/equinox ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for gtk-equinox-engine-1.50_3 file sizes/checksums [213]: ... done packing files [213]: ... done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for gtk-equinox-engine-1.50_3 build of x11-themes/gtk-equinox-engine ended at Wed Oct 5 18:16:19 PDT 2016 build time: 00:01:14