=> Building mail/ez-pine-gpg build started at Wed Oct 5 15:56:47 PDT 2016 port directory: /usr/ports/mail/ez-pine-gpg building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: ports@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../07//usr/ports/mail/ez-pine-gpg/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=ez-pine-gpg-0.4.h_2 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ===> The following configuration options are available for ez-pine-gpg-0.4.h_2: DOCS=on: Build and/or install documentation ===> Use 'make config' to modify these settings ---End OPTIONS List--- --CONFIGURE_ARGS-- --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- XDG_DATA_HOME=/wrkdirs/mail/ez-pine-gpg XDG_CONFIG_HOME=/wrkdirs/mail/ez-pine-gpg HOME=/wrkdirs/mail/ez-pine-gpg TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/mail/ez-pine-gpg XDG_CONFIG_HOME=/wrkdirs/mail/ez-pine-gpg HOME=/wrkdirs/mail/ez-pine-gpg TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/ez-pine-gpg" EXAMPLESDIR="share/examples/ez-pine-gpg" DATADIR="share/ez-pine-gpg" WWWDIR="www/ez-pine-gpg" ETCDIR="etc/ez-pine-gpg" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/ez-pine-gpg DOCSDIR=/usr/local/share/doc/ez-pine-gpg EXAMPLESDIR=/usr/local/share/examples/ez-pine-gpg WWWDIR=/usr/local/www/ez-pine-gpg ETCDIR=/usr/local/etc/ez-pine-gpg --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== ===> NOTICE: The ez-pine-gpg port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2+ accepted by the user =========================================================================== =================================================== ===> ez-pine-gpg-0.4.h_2 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> ez-pine-gpg-0.4.h_2 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of ez-pine-gpg-0.4.h_2 =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The ez-pine-gpg port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2+ accepted by the user ===> Fetching all distfiles required by ez-pine-gpg-0.4.h_2 for building =========================================================================== =================================================== ===> NOTICE: The ez-pine-gpg port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2+ accepted by the user ===> Fetching all distfiles required by ez-pine-gpg-0.4.h_2 for building => SHA256 Checksum OK for ez-pine-gpg_v0.4h.tgz. =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The ez-pine-gpg port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2+ accepted by the user ===> Fetching all distfiles required by ez-pine-gpg-0.4.h_2 for building ===> Extracting for ez-pine-gpg-0.4.h_2 => SHA256 Checksum OK for ez-pine-gpg_v0.4h.tgz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for ez-pine-gpg-0.4.h_2 ===> Applying ports patches for ez-pine-gpg-0.4.h_2 =========================================================================== =================================================== =========================================================================== =================================================== =========================================================================== =================================================== ===> Configuring for ez-pine-gpg-0.4.h_2 =========================================================================== =================================================== =========================================================================== =================================================== ===> ez-pine-gpg-0.4.h_2 depends on executable: gpg - not found ===> Installing existing package /packages/All/gnupg-2.1.13.txz Installing gnupg-2.1.13... `-- Installing indexinfo-0.2.5... `-- Extracting indexinfo-0.2.5: .... done `-- Installing gnutls-3.4.15... | `-- Installing nettle-3.2... | | `-- Installing libressl-2.4.3... | | `-- Extracting libressl-2.4.3: .......... done | | `-- Installing gmp-5.1.3_3... | | `-- Extracting gmp-5.1.3_3: .......... done | `-- Extracting nettle-3.2: .......... done | `-- Installing ca_root_nss-3.27... | `-- Extracting ca_root_nss-3.27: ....... done | `-- Installing libtasn1-4.9... | `-- Extracting libtasn1-4.9: .......... done | `-- Installing trousers-0.3.13_1... | | `-- Installing tpm-emulator-0.7.4_1... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. | | `-- Extracting tpm-emulator-0.7.4_1: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | `-- Extracting trousers-0.3.13_1: .......... done | `-- Installing p11-kit-0.23.2... | | `-- Installing libffi-3.2.1... | | `-- Extracting libffi-3.2.1: .......... done | `-- Extracting p11-kit-0.23.2: .......... done | `-- Installing gettext-runtime-0.19.8.1... | `-- Extracting gettext-runtime-0.19.8.1: .......... done | `-- Installing libidn-1.33_1... | `-- Extracting libidn-1.33_1: .......... done `-- Extracting gnutls-3.4.15: .......... done `-- Installing libassuan-2.4.3... | `-- Installing libgpg-error-1.24... | `-- Extracting libgpg-error-1.24: .......... done `-- Extracting libassuan-2.4.3: .......... done `-- Installing npth-1.2... `-- Extracting npth-1.2: .......... done `-- Installing libgcrypt-1.7.3... `-- Extracting libgcrypt-1.7.3: .......... done `-- Installing libksba-1.3.4... `-- Extracting libksba-1.3.4: .......... done `-- Installing pinentry-0.9.7_1... | `-- Installing pinentry-tty-0.9.7... | `-- Extracting pinentry-tty-0.9.7: . done `-- Extracting pinentry-0.9.7_1: .. done Extracting gnupg-2.1.13: .......... done Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.13_1: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Message from gnupg-2.1.13: ############################################################################### A T T E N T I O N In order to use gpg-agent, you need to install a pinentry dialog. The following ports of pinentry dialogs are available: security/pinentry-curses (ncurses based dialog) security/pinentry-gtk2 (GTK 2.x based dialog) security/pinentry-qt4 (QT4 based dialog) security/pinentry-tty (console based dialog) ############################################################################### ===> ez-pine-gpg-0.4.h_2 depends on executable: gpg - found ===> Returning to build of ez-pine-gpg-0.4.h_2 =========================================================================== =================================================== ===> Staging for ez-pine-gpg-0.4.h_2 ===> Generating temporary packing list (cd /wrkdirs/mail/ez-pine-gpg/ez-pine-gpg && /usr/bin/env DESTDIR="/wrkdirs/mail/ez-pine-gpg/stage" ./install /usr/local/bin) Installing ez-pine-gpg v0.4g installing: /wrkdirs/mail/ez-pine-gpg/stage/usr/local/bin/ez-pine-gpg-sign installing: /wrkdirs/mail/ez-pine-gpg/stage/usr/local/bin/ez-pine-gpg-encrypt installing: /wrkdirs/mail/ez-pine-gpg/stage/usr/local/bin/ez-pine-gpg-sign-and-encrypt installing: /wrkdirs/mail/ez-pine-gpg/stage/usr/local/bin/ez-pine-gpg-symmetric installing: /wrkdirs/mail/ez-pine-gpg/stage/usr/local/bin/ez-pine-gpg-incoming installing: /wrkdirs/mail/ez-pine-gpg/stage/usr/local/bin/ez-pine-gpg-helper-recipient installing: /wrkdirs/mail/ez-pine-gpg/stage/usr/local/bin/ez-pine-gpg-helper-sender Done installing! Now configure pine filters. In pine, press: [M]ain [S]etup [C]onfigure and add these filters: display-filters = _LEADING("-----BEGIN PGP")_ /usr/local/bin/ez-pine-gpg-incoming sending-filters = /usr/local/bin/ez-pine-gpg-sign-and-encrypt _INCLUDEALLHDRS_ _RECIPIENTS_ /usr/local/bin/ez-pine-gpg-encrypt _RECIPIENTS_ /usr/local/bin/ez-pine-gpg-sign _INCLUDEALLHDRS_ You may also install the ez-pine-gpg-symmetric sending filter. See the README for details. install -m 0644 /wrkdirs/mail/ez-pine-gpg/ez-pine-gpg/README /wrkdirs/mail/ez-pine-gpg/stage/usr/local/share/doc/ez-pine-gpg ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for ez-pine-gpg-0.4.h_2 file sizes/checksums [11]: . done packing files [11]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for ez-pine-gpg-0.4.h_2 build of mail/ez-pine-gpg ended at Wed Oct 5 15:57:05 PDT 2016 build time: 00:00:18