=> Building x11-wm/e-module-deskshow build started at Tue Oct 4 13:33:24 PDT 2016 port directory: /usr/ports/x11-wm/e-module-deskshow building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: enlightenment@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../03//usr/ports/x11-wm/e-module-deskshow/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=e-module-deskshow-20130510_2 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ---End OPTIONS List--- --CONFIGURE_ARGS-- --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- MAKE=gmake PKG_CONFIG=pkgconf XDG_DATA_HOME=/wrkdirs/x11-wm/e-module-deskshow XDG_CONFIG_HOME=/wrkdirs/x11-wm/e-module-deskshow HOME=/wrkdirs/x11-wm/e-module-deskshow TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/x11-wm/e-module-deskshow XDG_CONFIG_HOME=/wrkdirs/x11-wm/e-module-deskshow HOME=/wrkdirs/x11-wm/e-module-deskshow TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- ENLIGHTENMENT_ARCH=dragonfly4.7-x86_64-ver-0.21 OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/deskshow" EXAMPLESDIR="share/examples/deskshow" DATADIR="share/deskshow" WWWDIR="www/deskshow" ETCDIR="etc/deskshow" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/deskshow DOCSDIR=/usr/local/share/doc/deskshow EXAMPLESDIR=/usr/local/share/examples/deskshow WWWDIR=/usr/local/www/deskshow ETCDIR=/usr/local/etc/deskshow --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== =========================================================================== =================================================== ===> e-module-deskshow-20130510_2 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> e-module-deskshow-20130510_2 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of e-module-deskshow-20130510_2 =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by e-module-deskshow-20130510_2 for building =========================================================================== =================================================== ===> Fetching all distfiles required by e-module-deskshow-20130510_2 for building => SHA256 Checksum OK for e17/deskshow-20130510.tar.bz2. =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by e-module-deskshow-20130510_2 for building ===> Extracting for e-module-deskshow-20130510_2 => SHA256 Checksum OK for e17/deskshow-20130510.tar.bz2. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for e-module-deskshow-20130510_2 =========================================================================== =================================================== ===> e-module-deskshow-20130510_2 depends on executable: enlightenment - not found ===> Installing existing package /packages/All/enlightenment-0.21.2,2.txz Installing enlightenment-0.21.2,2... `-- Installing desktop-file-utils-0.22_3... | `-- Installing gettext-runtime-0.19.8.1... | | `-- Installing indexinfo-0.2.5... | | `-- Extracting indexinfo-0.2.5: .... done | `-- Extracting gettext-runtime-0.19.8.1: .......... done | `-- Installing glib-2.46.2_3... | | `-- Installing libiconv-1.14_9... | | `-- Extracting libiconv-1.14_9: .......... done | | `-- Installing python27-2.7.12... | | `-- Installing expat-2.2.0... | | `-- Extracting expat-2.2.0: .......... done | | `-- Installing readline-6.3.8... | | | `-- Installing ncurses-6.0_5... | | | `-- Extracting ncurses-6.0_5: .......... done | | `-- Extracting readline-6.3.8: .......... done | | `-- Installing libffi-3.2.1... | | `-- Extracting libffi-3.2.1: .......... done | | `-- Installing libressl-2.4.3... | | `-- Extracting libressl-2.4.3: .......... done | | `-- Extracting python27-2.7.12: .......... done | | `-- Installing pcre-8.39... | | `-- Extracting pcre-8.39: .......... done | | `-- Installing perl5-5.20.3_15... | | `-- Extracting perl5-5.20.3_15: .......... done | `-- Extracting glib-2.46.2_3: .......... done No schema files found: doing nothing. `-- Extracting desktop-file-utils-0.22_3: .......... done `-- Installing libxcb-1.11.1... | `-- Installing libxml2-2.9.4... | `-- Extracting libxml2-2.9.4: .......... done | `-- Installing libXdmcp-1.1.2... | | `-- Installing xproto-7.0.28... | | `-- Extracting xproto-7.0.28: .......... done | `-- Extracting libXdmcp-1.1.2: ......... done | `-- Installing libpthread-stubs-0.3_6... | `-- Extracting libpthread-stubs-0.3_6: ..... done | `-- Installing libXau-1.0.8_3... | `-- Extracting libXau-1.0.8_3: .......... done `-- Extracting libxcb-1.11.1: .......... done `-- Installing efl-1.18.1... | `-- Installing harfbuzz-1.3.2... | | `-- Installing cairo-1.14.6_1,2... | | `-- Installing glproto-1.4.17... | | `-- Extracting glproto-1.4.17: ...... done | | `-- Installing libEGL-11.2.2... | | | `-- Installing libdevq-0.0.2_1... | | | `-- Extracting libdevq-0.0.2_1: ....... done | | | `-- Installing libXdamage-1.1.4_3... | | | `-- Installing libXfixes-5.0.1_3... | | | | `-- Installing fixesproto-5.0... | | | | `-- Extracting fixesproto-5.0: .... done | | | | `-- Installing libX11-1.6.3,1... | | | | `-- Installing kbproto-1.0.7... | | | | `-- Extracting kbproto-1.0.7: .......... done | | | | `-- Extracting libX11-1.6.3,1: .......... done | | | `-- Extracting libXfixes-5.0.1_3: .......... done | | | `-- Installing damageproto-1.2.1... | | | `-- Extracting damageproto-1.2.1: .... done | | | `-- Extracting libXdamage-1.1.4_3: ...... done | | | `-- Installing libxshmfence-1.2... | | | `-- Extracting libxshmfence-1.2: ......... done | | | `-- Installing libXext-1.3.3_1,1... | | | `-- Installing xextproto-7.3.0... | | | `-- Extracting xextproto-7.3.0: .......... done | | | `-- Extracting libXext-1.3.3_1,1: .......... done | | | `-- Installing gbm-11.2.2... | | | `-- Installing libglapi-11.2.2... | | | | `-- Installing libXvMC-1.0.9... | | | | `-- Installing libXv-1.0.10_3,1... | | | | | `-- Installing videoproto-2.3.2... | | | | | `-- Extracting videoproto-2.3.2: ...... done | | | | `-- Extracting libXv-1.0.10_3,1: .......... done | | | | `-- Extracting libXvMC-1.0.9: .......... done | | | | `-- Installing libdrm-2.4.66,1... | | | | `-- Installing libpciaccess-0.13.4... | | | | | `-- Installing pciids-20160621... | | | | | `-- Extracting pciids-20160621: ..... done | | | | `-- Extracting libpciaccess-0.13.4: ...... done | | | | `-- Extracting libdrm-2.4.66,1: .......... done | | | | `-- Installing libelf-0.8.13_1... | | | | `-- Extracting libelf-0.8.13_1: .......... done | | | `-- Extracting libglapi-11.2.2: ... done | | | `-- Extracting gbm-11.2.2: ..... done | | | `-- Installing llvm37-3.7.1_3... | | | `-- Installing libedit-3.1.20150325_2,1... | | | `-- Extracting libedit-3.1.20150325_2,1: .......... done | | | `-- Extracting llvm37-3.7.1_3: .......... done | | `-- Extracting libEGL-11.2.2: .......... done | | `-- Installing libXrender-0.9.9... | | | `-- Installing renderproto-0.11.1... | | | `-- Extracting renderproto-0.11.1: .... done | | `-- Extracting libXrender-0.9.9: .......... done | | `-- Installing libGL-11.2.2... | | | `-- Installing dri2proto-2.8... | | | `-- Extracting dri2proto-2.8: .... done | | | `-- Installing libXxf86vm-1.1.4_1... | | | `-- Installing xf86vidmodeproto-2.3.1... | | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | | `-- Extracting libGL-11.2.2: .......... done | | `-- Installing freetype2-2.6.3... | | `-- Extracting freetype2-2.6.3: .......... done | | `-- Installing xcb-util-renderutil-0.3.9_1... | | | `-- Installing xcb-util-0.4.0_1,1... | | | `-- Extracting xcb-util-0.4.0_1,1: .......... done | | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done | | `-- Installing png-1.6.23... | | `-- Extracting png-1.6.23: .......... done | | `-- Installing fontconfig-2.12.1,1... | | `-- Extracting fontconfig-2.12.1,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | | `-- Installing pixman-0.34.0... | | `-- Extracting pixman-0.34.0: .......... done | | `-- Extracting cairo-1.14.6_1,2: .......... done | | `-- Installing icu-57.1,1... | | `-- Extracting icu-57.1,1: .......... done | | `-- Installing graphite2-1.3.8... | | `-- Extracting graphite2-1.3.8: .......... done | `-- Extracting harfbuzz-1.3.2: .......... done | `-- Installing giflib-5.1.3... | `-- Extracting giflib-5.1.3: .......... done | `-- Installing bullet-2.83.7... | | `-- Installing freeglut-3.0.0... | | `-- Installing libGLU-9.0.0_2... | | `-- Extracting libGLU-9.0.0_2: ...... done | | `-- Installing libXrandr-1.5.0... | | | `-- Installing randrproto-1.5.0... | | | `-- Extracting randrproto-1.5.0: .... done | | `-- Extracting libXrandr-1.5.0: .......... done | | `-- Installing libICE-1.0.9_1,1... | | `-- Extracting libICE-1.0.9_1,1: .......... done | | `-- Installing libXi-1.7.6,1... | | | `-- Installing inputproto-2.3.1... | | | `-- Extracting inputproto-2.3.1: ..... done | | `-- Extracting libXi-1.7.6,1: .......... done | | `-- Extracting freeglut-3.0.0: .......... done | `-- Extracting bullet-2.83.7: .......... done | `-- Installing libXtst-1.2.2_3... | | `-- Installing recordproto-1.14.2... | | `-- Extracting recordproto-1.14.2: .... done | `-- Extracting libXtst-1.2.2_3: .......... done | `-- Installing pango-1.38.0_1... | | `-- Installing encodings-1.0.4_3,1... | | `-- Installing font-util-1.3.1... | | `-- Extracting font-util-1.3.1: .......... done | | `-- Extracting encodings-1.0.4_3,1: .......... done | | `-- Installing libXft-2.3.2_1... | | `-- Extracting libXft-2.3.2_1: ......... done | | `-- Installing xorg-fonts-truetype-7.7_1... | | `-- Installing font-misc-meltho-1.0.3_3... | | | `-- Installing mkfontdir-1.0.7... | | | `-- Installing mkfontscale-1.1.2... | | | | `-- Installing libfontenc-1.1.3... | | | | `-- Extracting libfontenc-1.1.3: ...... done | | | `-- Extracting mkfontscale-1.1.2: .. done | | | `-- Extracting mkfontdir-1.0.7: .. done | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done | | `-- Installing font-bh-ttf-1.0.3_3... | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | `-- Installing font-misc-ethiopic-1.0.3_3... | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | `-- Installing dejavu-2.35... | | `-- Extracting dejavu-2.35: .......... done | `-- Extracting pango-1.38.0_1: .......... done | `-- Installing libsndfile-1.0.26_1... | | `-- Installing flac-1.3.1_2... | | `-- Installing libogg-1.3.2_1,4... | | `-- Extracting libogg-1.3.2_1,4: .......... done | | `-- Extracting flac-1.3.1_2: .......... done | | `-- Installing libvorbis-1.3.5,3... | | `-- Extracting libvorbis-1.3.5,3: .......... done | `-- Extracting libsndfile-1.0.26_1: .......... done | `-- Installing libXcursor-1.1.14_3... | `-- Extracting libXcursor-1.1.14_3: .......... done | `-- Installing libXinerama-1.1.3_3,1... | | `-- Installing xineramaproto-1.2.1... | | `-- Extracting xineramaproto-1.2.1: .. done | `-- Extracting libXinerama-1.1.3_3,1: .......... done | `-- Installing libgsf-1.14.36... | | `-- Installing gdk-pixbuf2-2.32.3_1... | | `-- Installing jasper-1.900.1_16... | | | `-- Installing jpeg-turbo-1.4.2... | | | `-- Extracting jpeg-turbo-1.4.2: .......... done | | `-- Extracting jasper-1.900.1_16: .......... done | | `-- Installing libXt-1.1.5,1... | | | `-- Installing libSM-1.2.2_3,1... | | | `-- Extracting libSM-1.2.2_3,1: .......... done | | `-- Extracting libXt-1.1.5,1: .......... done | | `-- Installing tiff-4.0.6_2... | | | `-- Installing jbigkit-2.1_1... | | | `-- Extracting jbigkit-2.1_1: .......... done | | `-- Extracting tiff-4.0.6_2: .......... done | | `-- Extracting gdk-pixbuf2-2.32.3_1: .......... done | `-- Extracting libgsf-1.14.36: .......... done | `-- Installing librsvg2-2.40.16... | | `-- Installing libcroco-0.6.11... | | `-- Extracting libcroco-0.6.11: .......... done | `-- Extracting librsvg2-2.40.16: .......... done | `-- Installing gstreamer1-plugins-core-1.4.0... | | `-- Installing gstreamer1-plugins-a52dec-1.8.0... | | `-- Installing gstreamer1-plugins-1.8.0... | | | `-- Installing orc-0.4.25... | | | `-- Extracting orc-0.4.25: .......... done | | | `-- Installing gstreamer1-1.8.0... | | | `-- Extracting gstreamer1-1.8.0: .......... done | | | `-- Installing iso-codes-3.69... | | | `-- Extracting iso-codes-3.69: .......... done | | `-- Extracting gstreamer1-plugins-1.8.0: .......... done | | `-- Installing liba52-0.7.4_3... | | `-- Extracting liba52-0.7.4_3: .......... done | | `-- Installing gstreamer1-plugins-ugly-1.8.0... | | `-- Extracting gstreamer1-plugins-ugly-1.8.0: .......... done | | `-- Extracting gstreamer1-plugins-a52dec-1.8.0: . done | | `-- Installing gstreamer1-plugins-dts-1.8.0... | | `-- Installing gstreamer1-plugins-bad-1.8.0_1... | | `-- Extracting gstreamer1-plugins-bad-1.8.0_1: .......... done | | `-- Installing libdca-0.0.5_1... | | `-- Extracting libdca-0.0.5_1: .......... done | | `-- Extracting gstreamer1-plugins-dts-1.8.0: . done | | `-- Installing gstreamer1-plugins-pango-1.8.0... | | `-- Extracting gstreamer1-plugins-pango-1.8.0: . done | | `-- Installing gstreamer1-plugins-theora-1.8.0... | | `-- Installing libtheora-1.1.1_6... | | `-- Extracting libtheora-1.1.1_6: .......... done | | `-- Extracting gstreamer1-plugins-theora-1.8.0: . done | | `-- Installing gstreamer1-plugins-resindvd-1.8.0... | | `-- Installing libdvdnav-5.0.3... | | | `-- Installing libdvdread-5.0.3... | | | `-- Extracting libdvdread-5.0.3: .......... done | | `-- Extracting libdvdnav-5.0.3: .......... done | | `-- Extracting gstreamer1-plugins-resindvd-1.8.0: . done | | `-- Installing gstreamer1-plugins-png-1.8.0... | | `-- Installing gstreamer1-plugins-good-1.8.0... | | `-- Extracting gstreamer1-plugins-good-1.8.0: .......... done | | `-- Extracting gstreamer1-plugins-png-1.8.0: . done | | `-- Installing gstreamer1-libav-1.8.0... | | `-- Installing ffmpeg-2.8.8_2,1... | | | `-- Installing libv4l-1.6.3_2... | | | `-- Extracting libv4l-1.6.3_2: .......... done | | | `-- Installing gnutls-3.4.15... | | | `-- Installing nettle-3.2... | | | | `-- Installing gmp-5.1.3_3... | | | | `-- Extracting gmp-5.1.3_3: .......... done | | | `-- Extracting nettle-3.2: .......... done | | | `-- Installing ca_root_nss-3.27... | | | `-- Extracting ca_root_nss-3.27: ....... done | | | `-- Installing libtasn1-4.9... | | | `-- Extracting libtasn1-4.9: .......... done | | | `-- Installing trousers-0.3.13_1... | | | | `-- Installing tpm-emulator-0.7.4_1... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. | | | | `-- Extracting tpm-emulator-0.7.4_1: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | | `-- Extracting trousers-0.3.13_1: .......... done | | | `-- Installing p11-kit-0.23.2... | | | `-- Extracting p11-kit-0.23.2: .......... done | | | `-- Installing libidn-1.33_1... | | | `-- Extracting libidn-1.33_1: .......... done | | | `-- Extracting gnutls-3.4.15: .......... done | | | `-- Installing opencv-core-2.4.9_3... | | | `-- Extracting opencv-core-2.4.9_3: .......... done | | | `-- Installing libva-1.7.2... | | | `-- Extracting libva-1.7.2: .......... done | | | `-- Installing libvdpau-1.1.1... | | | `-- Extracting libvdpau-1.1.1: .......... done | | | `-- Installing xvid-1.3.4,1... | | | `-- Extracting xvid-1.3.4,1: ........ done | | | `-- Installing libvpx-1.6.0... | | | `-- Extracting libvpx-1.6.0: .......... done | | | `-- Installing schroedinger-1.0.11_4... | | | `-- Extracting schroedinger-1.0.11_4: .......... done | | | `-- Installing libx264-0.148.2708... | | | `-- Extracting libx264-0.148.2708: ......... done | | `-- Extracting ffmpeg-2.8.8_2,1: .......... done | | `-- Extracting gstreamer1-libav-1.8.0: .......... done | | `-- Installing gstreamer1-plugins-dvdread-1.8.0... | | `-- Extracting gstreamer1-plugins-dvdread-1.8.0: . done | | `-- Installing gstreamer1-plugins-vorbis-1.8.0... | | `-- Installing gstreamer1-plugins-ogg-1.8.0... | | `-- Extracting gstreamer1-plugins-ogg-1.8.0: . done | | `-- Extracting gstreamer1-plugins-vorbis-1.8.0: . done | | `-- Installing gstreamer1-plugins-mad-1.8.0... | | `-- Installing libmad-0.15.1b_6... | | `-- Extracting libmad-0.15.1b_6: ......... done | | `-- Extracting gstreamer1-plugins-mad-1.8.0: . done | `-- Extracting gstreamer1-plugins-core-1.4.0: . done | `-- Installing dbus-1.8.20... | | `-- Installing gnome_subr-1.0... | | `-- Extracting gnome_subr-1.0: . done ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | `-- Extracting dbus-1.8.20: ......... done | `-- Installing libXp-1.0.3,1... | | `-- Installing printproto-1.0.5... | | `-- Extracting printproto-1.0.5: .... done | `-- Extracting libXp-1.0.3,1: .......... done | `-- Installing luajit-2.0.4_1... | `-- Extracting luajit-2.0.4_1: .......... done | `-- Installing fribidi-0.19.7... | `-- Extracting fribidi-0.19.7: .......... done | `-- Installing libXcomposite-0.4.4_3,1... | | `-- Installing compositeproto-0.4.2... | | `-- Extracting compositeproto-0.4.2: .... done | `-- Extracting libXcomposite-0.4.4_3,1: .......... done | `-- Installing libXScrnSaver-1.2.2_3... | | `-- Installing scrnsaverproto-1.2.2... | | `-- Extracting scrnsaverproto-1.2.2: ... done | `-- Extracting libXScrnSaver-1.2.2_3: .......... done | `-- Installing poppler-0.46.0_1... | | `-- Installing lcms2-2.7_2... | | `-- Extracting lcms2-2.7_2: .......... done | | `-- Installing openjpeg15-1.5.2_1... | | `-- Extracting openjpeg15-1.5.2_1: .......... done | | `-- Installing poppler-data-0.4.7... | | `-- Extracting poppler-data-0.4.7: .......... done | `-- Extracting poppler-0.46.0_1: .......... done | `-- Installing shared-mime-info-1.5... | `-- Extracting shared-mime-info-1.5: .......... done `-- Extracting efl-1.18.1: .......... done `-- Installing xcb-util-keysyms-0.4.0_1... `-- Extracting xcb-util-keysyms-0.4.0_1: ...... done Extracting enlightenment-0.21.2,2: .......... done Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from python27-2.7.12: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== Message from perl5-5.20.3_15: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Message from freeglut-3.0.0: Joystick support is untested and it is unknown if it works. Do not hesitate to contact x11@FreeBSD.org if this causes issues. Message from dejavu-2.35: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from libdca-0.0.5_1: ===> NOTICE: The libdca port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.13_1: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Message from schroedinger-1.0.11_4: ===> NOTICE: The schroedinger port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from enlightenment-0.21.2,2: ******************************************************** NOTE: If you want "Shutdown" and "Restart" menu actions to work properly, manually set SUID bit on "/usr/local/lib/enlightenment/utils/enlightenment_sys" executable. WARNING: this program might be vulnerable so do not set suid bit if do not trust all users of this machine. ******************************************************** ===> e-module-deskshow-20130510_2 depends on executable: enlightenment - found ===> Returning to build of e-module-deskshow-20130510_2 ===> e-module-deskshow-20130510_2 depends on executable: gmake - not found ===> Installing existing package /packages/All/gmake-4.2.1_1.txz Installing gmake-4.2.1_1... Extracting gmake-4.2.1_1: .......... done ===> e-module-deskshow-20130510_2 depends on executable: gmake - found ===> Returning to build of e-module-deskshow-20130510_2 ===> e-module-deskshow-20130510_2 depends on package: pkgconf>=0.9.10 - not found ===> Installing existing package /packages/All/pkgconf-1.0.1.txz Installing pkgconf-1.0.1... Extracting pkgconf-1.0.1: .......... done ===> e-module-deskshow-20130510_2 depends on package: pkgconf>=0.9.10 - found ===> Returning to build of e-module-deskshow-20130510_2 =========================================================================== =================================================== =========================================================================== =================================================== ===> Configuring for e-module-deskshow-20130510_2 configure: loading site script /usr/ports/Templates/config.site checking build system type... x86_64-portbld-dragonfly4.7 checking host system type... x86_64-portbld-dragonfly4.7 checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for library containing strerror... none required checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether gmake sets $(MAKE)... yes checking for style of include used by gmake... GNU checking dependency style of cc... gcc3 checking for gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ISO C89... (cached) none needed checking how to run the C preprocessor... cpp checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ANSI C header files... (cached) yes checking for an ANSI C-conforming const... yes checking how to print strings... printf checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for fgrep... (cached) /usr/bin/fgrep checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... (cached) 262144 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... no checking how to convert x86_64-portbld-dragonfly4.7 file names to x86_64-portbld-dragonfly4.7 format... func_convert_file_noop checking how to convert x86_64-portbld-dragonfly4.7 file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from cc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for dlfcn.h... (cached) yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly4.7 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking pkg-config is at least version 0.9.0... yes checking for E... yes checking for EDJE... yes checking Which edje_cc to use... /usr/local/bin/edje_cc checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating e_modules-deskshow.spec config.status: creating module.desktop config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing default commands =========================================================================== =================================================== ===> Building for e-module-deskshow-20130510_2 gmake[1]: Entering directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510/missing --run autoheader) /wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510/missing: autoheader: not found WARNING: 'autoheader' is missing on your system. You should only need it if you modified 'acconfig.h' or 'configure.ac'. You might want to install the Autoconf and GNU m4 packages. Grab them from any GNU archive site. rm -f stamp-h1 touch config.h.in cd . && /bin/sh ./config.status config.h config.status: creating config.h config.status: config.h is unchanged gmake all-recursive gmake[2]: Entering directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' Making all in src gmake[3]: Entering directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510/src' /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -I/usr/local/include -I/usr/local/include/enlightenment -DUSE_E_CONFIG_H -I/usr/local/include/efl-1 -I/usr/local/include/evas-1 -I/usr/local/include/evas-1/canvas -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/fribidi -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/ecore-1 -I/usr/local/include/eo-1 -I/usr/local/include/eina-1 -I/usr/local/include/eina-1/eina -I/usr/local/include/eet-1 -I/usr/local/include/emile-1 -I/usr/local/include/luajit-2.0 -I/usr/local/include/ecore-evas-1 -I/usr/local/include/ecore-input-1 -I/usr/local/include/ecore-input-evas-1 -I/usr/local/include/ecore-con-1 -I/usr/local/include/ecore-ipc-1 -I/usr/local/include/ecore-file-1 -I/usr/local/include/edje-1 -I/usr/local/include/eio-1 -I/usr/local/include/efreet-1 -I/usr/local/include/embryo-1 -I/usr/local/include/ecore-imf-evas-1 -I/usr/local/include/ecore-imf-1 -I/usr/local/include/eldbus-1 -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/usr/local/include/elementary-1 -I/usr/local/include/ecore-x-1 -I/usr/local/include/elocation-1 -I/usr/local/include/emotion-1 -I/usr/local/include/ethumb-client-1 -I/usr/local/include/ethumb-1 -pipe -O2 -fno-strict-aliasing -MT e_mod_main.lo -MD -MP -MF .deps/e_mod_main.Tpo -c -o e_mod_main.lo e_mod_main.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -I/usr/local/include -I/usr/local/include/enlightenment -DUSE_E_CONFIG_H -I/usr/local/include/efl-1 -I/usr/local/include/evas-1 -I/usr/local/include/evas-1/canvas -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/fribidi -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/ecore-1 -I/usr/local/include/eo-1 -I/usr/local/include/eina-1 -I/usr/local/include/eina-1/eina -I/usr/local/include/eet-1 -I/usr/local/include/emile-1 -I/usr/local/include/luajit-2.0 -I/usr/local/include/ecore-evas-1 -I/usr/local/include/ecore-input-1 -I/usr/local/include/ecore-input-evas-1 -I/usr/local/include/ecore-con-1 -I/usr/local/include/ecore-ipc-1 -I/usr/local/include/ecore-file-1 -I/usr/local/include/edje-1 -I/usr/local/include/eio-1 -I/usr/local/include/efreet-1 -I/usr/local/include/embryo-1 -I/usr/local/include/ecore-imf-evas-1 -I/usr/local/include/ecore-imf-1 -I/usr/local/include/eldbus-1 -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/usr/local/include/elementary-1 -I/usr/local/include/ecore-x-1 -I/usr/local/include/elocation-1 -I/usr/local/include/emotion-1 -I/usr/local/include/ethumb-client-1 -I/usr/local/include/ethumb-1 -pipe -O2 -fno-strict-aliasing -MT e_mod_main.lo -MD -MP -MF .deps/e_mod_main.Tpo -c e_mod_main.c -fPIC -DPIC -o .libs/e_mod_main.o e_mod_main.c: In function '_button_cb_mouse_down': e_mod_main.c:134:14: warning: implicit declaration of function 'e_util_zone_current_get' [-Wimplicit-function-declaration] zone = e_util_zone_current_get(e_manager_current_get()); ^ e_mod_main.c:134:38: warning: implicit declaration of function 'e_manager_current_get' [-Wimplicit-function-declaration] zone = e_util_zone_current_get(e_manager_current_get()); ^ e_mod_main.c:134:12: warning: assignment makes pointer from integer without a cast [-Wint-conversion] zone = e_util_zone_current_get(e_manager_current_get()); ^ libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -I/usr/local/include -I/usr/local/include/enlightenment -DUSE_E_CONFIG_H -I/usr/local/include/efl-1 -I/usr/local/include/evas-1 -I/usr/local/include/evas-1/canvas -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/fribidi -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/ecore-1 -I/usr/local/include/eo-1 -I/usr/local/include/eina-1 -I/usr/local/include/eina-1/eina -I/usr/local/include/eet-1 -I/usr/local/include/emile-1 -I/usr/local/include/luajit-2.0 -I/usr/local/include/ecore-evas-1 -I/usr/local/include/ecore-input-1 -I/usr/local/include/ecore-input-evas-1 -I/usr/local/include/ecore-con-1 -I/usr/local/include/ecore-ipc-1 -I/usr/local/include/ecore-file-1 -I/usr/local/include/edje-1 -I/usr/local/include/eio-1 -I/usr/local/include/efreet-1 -I/usr/local/include/embryo-1 -I/usr/local/include/ecore-imf-evas-1 -I/usr/local/include/ecore-imf-1 -I/usr/local/include/eldbus-1 -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/usr/local/include/elementary-1 -I/usr/local/include/ecore-x-1 -I/usr/local/include/elocation-1 -I/usr/local/include/emotion-1 -I/usr/local/include/ethumb-client-1 -I/usr/local/include/ethumb-1 -pipe -O2 -fno-strict-aliasing -MT e_mod_main.lo -MD -MP -MF .deps/e_mod_main.Tpo -c e_mod_main.c -o e_mod_main.o >/dev/null 2>&1 mv -f .deps/e_mod_main.Tpo .deps/e_mod_main.Plo /bin/sh ../libtool --tag=CC --mode=link cc -pipe -O2 -fno-strict-aliasing -module -avoid-version -o module.la -rpath /usr/local/lib/enlightenment/modules/deskshow/dragonfly4.7-x86_64-ver-0.21 e_mod_main.lo -L/usr/local/lib -lecore_ipc -leina -leio -lelementary -lefl -leina -lpthread -leet -levas -lecore -lecore_evas -lecore_file -lecore_input -ledje -leo -lethumb_client -lecore_imf -lecore_con -leldbus -lefreet -lefreet_mime -lefreet_trash -leio -lpthread -lm -lemotion -lecore_x -lm libtool: link: cc -shared -fPIC -DPIC .libs/e_mod_main.o -L/usr/local/lib -lecore_ipc -lelementary -lefl -leina -leet -levas -lecore -lecore_evas -lecore_file -lecore_input -ledje -leo -lethumb_client -lecore_imf -lecore_con -leldbus -lefreet -lefreet_mime -lefreet_trash -leio -lpthread -lemotion -lecore_x -lm -O2 -Wl,-soname -Wl,module.so -o .libs/module.so libtool: link: ar cru .libs/module.a e_mod_main.o libtool: link: ranlib .libs/module.a libtool: link: ( cd ".libs" && rm -f "module.la" && ln -s "../module.la" "module.la" ) gmake[3]: Leaving directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510/src' gmake[3]: Entering directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' /usr/local/bin/edje_cc -v -id ./images e-module-deskshow.edc e-module-deskshow.edj ERR<982607>:eldbus lib/eldbus/eldbus_core.c:1021 _connection_get() Error connecting to bus of type 2. error name: org.freedesktop.DBus.Error.FileNotFound error message: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory ERR<982607>:eina_safety lib/eldbus/eldbus_core.c:1084 eldbus_connection_get() safety check failed: conn == NULL ERR<982607>:eina_safety lib/eldbus/eldbus_object.c:192 eldbus_object_get() safety check failed: conn == NULL ERR<982607>:ecore_system_upower modules/ecore/system/upower/ecore_system_upower.c:429 _ecore_system_upower_init() could not get object name=org.freedesktop.UPower, path=/org/freedesktop/UPower ERR<982607>:eina_safety lib/eldbus/eldbus_core.c:1392 eldbus_name_owner_changed_callback_del() safety check failed: conn == NULL edje_cc: Wrote 190 bytes ( 0Kb) for "edje_file" header edje_cc: header: 0.00034 edje_cc: groups: 0.00161 edje_cc: scripts: 0.00001 edje_cc: lua scripts: 0.00000 edje_cc: source: 0.00010 edje_cc: fontmap: 0.00002 edje_cc: Wrote 2436 bytes ( 2Kb) for "edje/images/0" image entry "module_icon.png" compress: [raw: 85.1%] [real: -4.5%] edje_cc: images: 0.00234 edje_cc: vectors: 0.00005 edje_cc: models: 0.00000 edje_cc: fonts: 0.00000 edje_cc: sounds: 0.00000 edje_cc: mo: 0.00000 edje_cc: vibrations: 0.00000 edje_cc: license: 0.00000 edje_cc: THREADS: 0.00000 Summary: Wrote 2 collections Wrote 1 images Wrote 0 sounds Wrote 0 fonts gmake[3]: Leaving directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' gmake[2]: Leaving directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' gmake[1]: Leaving directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' =========================================================================== =================================================== ===> e-module-deskshow-20130510_2 depends on executable: enlightenment - found =========================================================================== =================================================== ===> Staging for e-module-deskshow-20130510_2 ===> Generating temporary packing list gmake[1]: Entering directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' if test -z 'strip'; then \ gmake INSTALL_PROGRAM="/bin/sh /wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510/install-sh -c -s" \ install_sh_PROGRAM="/bin/sh /wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ install; \ else \ gmake INSTALL_PROGRAM="/bin/sh /wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510/install-sh -c -s" \ install_sh_PROGRAM="/bin/sh /wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='strip'" install; \ fi gmake[2]: Entering directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' Making install in src gmake[3]: Entering directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510/src' ERR<982763>:eldbus lib/eldbus/eldbus_core.c:1021 _connection_get() Error connecting to bus of type 2. error name: org.freedesktop.DBus.Error.FileNotFound error message: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory ERR<982763>:eina_safety lib/eldbus/eldbus_core.c:1084 eldbus_connection_get() safety check failed: conn == NULL ERR<982763>:eina_safety lib/eldbus/eldbus_object.c:192 eldbus_object_get() safety check failed: conn == NULL ERR<982763>:ecore_system_upower modules/ecore/system/upower/ecore_system_upower.c:429 _ecore_system_upower_init() could not get object name=org.freedesktop.UPower, path=/org/freedesktop/UPower ERR<982763>:eina_safety lib/eldbus/eldbus_core.c:1392 eldbus_name_owner_changed_callback_del() safety check failed: conn == NULL gmake[4]: Entering directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510/src' gmake[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/wrkdirs/x11-wm/e-module-deskshow/stage/usr/local/lib/enlightenment/modules/deskshow/dragonfly4.7-x86_64-ver-0.21' /bin/sh ../libtool --mode=install /usr/bin/install -c -s module.la '/wrkdirs/x11-wm/e-module-deskshow/stage/usr/local/lib/enlightenment/modules/deskshow/dragonfly4.7-x86_64-ver-0.21' libtool: install: /usr/bin/install -c .libs/module.so /wrkdirs/x11-wm/e-module-deskshow/stage/usr/local/lib/enlightenment/modules/deskshow/dragonfly4.7-x86_64-ver-0.21/module.so libtool: install: strip --strip-unneeded /wrkdirs/x11-wm/e-module-deskshow/stage/usr/local/lib/enlightenment/modules/deskshow/dragonfly4.7-x86_64-ver-0.21/module.so libtool: install: /usr/bin/install -c .libs/module.lai /wrkdirs/x11-wm/e-module-deskshow/stage/usr/local/lib/enlightenment/modules/deskshow/dragonfly4.7-x86_64-ver-0.21/module.la libtool: install: /usr/bin/install -c .libs/module.a /wrkdirs/x11-wm/e-module-deskshow/stage/usr/local/lib/enlightenment/modules/deskshow/dragonfly4.7-x86_64-ver-0.21/module.a libtool: install: strip --strip-debug /wrkdirs/x11-wm/e-module-deskshow/stage/usr/local/lib/enlightenment/modules/deskshow/dragonfly4.7-x86_64-ver-0.21/module.a libtool: install: chmod 644 /wrkdirs/x11-wm/e-module-deskshow/stage/usr/local/lib/enlightenment/modules/deskshow/dragonfly4.7-x86_64-ver-0.21/module.a libtool: install: ranlib /wrkdirs/x11-wm/e-module-deskshow/stage/usr/local/lib/enlightenment/modules/deskshow/dragonfly4.7-x86_64-ver-0.21/module.a libtool: install: warning: remember to run `libtool --finish /usr/local/lib/enlightenment/modules/deskshow/dragonfly4.7-x86_64-ver-0.21' gmake[4]: Leaving directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510/src' gmake[3]: Leaving directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510/src' gmake[3]: Entering directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' gmake[4]: Entering directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' gmake[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/wrkdirs/x11-wm/e-module-deskshow/stage/usr/local/lib/enlightenment/modules/deskshow' install -m 0644 module.desktop e-module-deskshow.edj '/wrkdirs/x11-wm/e-module-deskshow/stage/usr/local/lib/enlightenment/modules/deskshow' gmake[4]: Leaving directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' gmake[3]: Leaving directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' gmake[2]: Leaving directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' gmake[1]: Leaving directory '/wrkdirs/x11-wm/e-module-deskshow/deskshow-20130510' ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for e-module-deskshow-20130510_2 file sizes/checksums [4]: . done packing files [4]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for e-module-deskshow-20130510_2 build of x11-wm/e-module-deskshow ended at Tue Oct 4 13:35:21 PDT 2016 build time: 00:01:57