=> Building net-mgmt/check_mysql_health build started at Wed Oct 5 03:53:56 PDT 2016 port directory: /usr/ports/net-mgmt/check_mysql_health building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: ports@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../01//usr/ports/net-mgmt/check_mysql_health/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=check_mysql_health-2.2.2 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ---End OPTIONS List--- --CONFIGURE_ARGS-- --with-statefiles-dir=/var/spool/nagios --with-nagios-user=nagios --with-nagios-group=nagios --with-mymodules-dir=/usr/local/libexec/nagios --with-mymodules-dyn-dir=/usr/local/libexec/nagios --libexecdir=/usr/local/libexec/nagios --with-perl=/usr/local/bin/perl --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- ac_cv_path_PERL=/usr/local/bin/perl ac_cv_path_PERL_PATH=/usr/local/bin/perl XDG_DATA_HOME=/wrkdirs/net-mgmt/check_mysql_health XDG_CONFIG_HOME=/wrkdirs/net-mgmt/check_mysql_health HOME=/wrkdirs/net-mgmt/check_mysql_health TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/net-mgmt/check_mysql_health XDG_CONFIG_HOME=/wrkdirs/net-mgmt/check_mysql_health HOME=/wrkdirs/net-mgmt/check_mysql_health TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PERL_VERSION=5.20.3 PERL_VER=5.20 PERL5_MAN1=lib/perl5/site_perl/man/man1 PERL5_MAN3=lib/perl5/site_perl/man/man3 SITE_PERL=lib/perl5/site_perl SITE_ARCH=lib/perl5/site_perl/mach/5.20 PROFILE="@comment " DOCSDIR="share/doc/check_mysql_health" EXAMPLESDIR="share/examples/check_mysql_health" DATADIR="share/check_mysql_health" WWWDIR="www/check_mysql_health" ETCDIR="etc/check_mysql_health" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/check_mysql_health DOCSDIR=/usr/local/share/doc/check_mysql_health EXAMPLESDIR=/usr/local/share/examples/check_mysql_health WWWDIR=/usr/local/www/check_mysql_health ETCDIR=/usr/local/etc/check_mysql_health --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== ===> NOTICE: The check_mysql_health port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2 accepted by the user =========================================================================== =================================================== ===> check_mysql_health-2.2.2 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> check_mysql_health-2.2.2 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of check_mysql_health-2.2.2 =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The check_mysql_health port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2 accepted by the user ===> Fetching all distfiles required by check_mysql_health-2.2.2 for building =========================================================================== =================================================== ===> NOTICE: The check_mysql_health port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2 accepted by the user ===> Fetching all distfiles required by check_mysql_health-2.2.2 for building => SHA256 Checksum OK for check_mysql_health-2.2.2.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The check_mysql_health port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2 accepted by the user ===> Fetching all distfiles required by check_mysql_health-2.2.2 for building ===> Extracting for check_mysql_health-2.2.2 => SHA256 Checksum OK for check_mysql_health-2.2.2.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for check_mysql_health-2.2.2 =========================================================================== =================================================== ===> check_mysql_health-2.2.2 depends on package: perl5>=5.20<5.21 - not found ===> Installing existing package /packages/All/perl5-5.20.3_15.txz Installing perl5-5.20.3_15... Extracting perl5-5.20.3_15: .......... done Message from perl5-5.20.3_15: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. ===> check_mysql_health-2.2.2 depends on package: perl5>=5.20<5.21 - found ===> Returning to build of check_mysql_health-2.2.2 =========================================================================== =================================================== =========================================================================== =================================================== ===> Configuring for check_mysql_health-2.2.2 configure: loading site script /usr/ports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking how to create a pax tar archive... gnutar checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... x86_64-portbld-dragonfly4.7 checking host system type... x86_64-portbld-dragonfly4.7 variable with_statefiles_dir is /var/spool/nagios variable with_mymodules_dir is /usr/local/libexec/nagios variable with_mymodules_dyn_dir is /usr/local/libexec/nagios checking whether make sets $(MAKE)... (cached) yes checking for echo... /bin/echo checking for sed... (cached) /usr/bin/sed checking for grep... (cached) /usr/bin/grep checking for cat... /bin/cat checking for sh... /bin/sh checking for perl... (cached) /usr/local/bin/perl checking for gzip... (cached) /usr/bin/gzip checking for gawk... /usr/bin/awk checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating plugins-scripts/Makefile config.status: creating plugins-scripts/subst config.status: creating t/Makefile --with-perl: /usr/local/bin/perl --with-statefiles-dir: /var/spool/nagios --with-nagios-user: nagios --with-nagios-group: nagios --with-mymodules-dir: /usr/local/libexec/nagios --with-mymodules-dyn-dir: /usr/local/libexec/nagios =========================================================================== =================================================== ===> Building for check_mysql_health-2.2.2 --- all-recursive --- Making all in plugins-scripts --- check_mysql_health --- /bin/echo "#! #PERL# -w" | /usr/bin/awk -f ./subst > check_mysql_health /bin/echo "# nagios: -epn" >> check_mysql_health /bin/echo >> check_mysql_health /bin/echo "my %ERRORS=( OK => 0, WARNING => 1, CRITICAL => 2, UNKNOWN => 3 );" >> check_mysql_health /bin/echo "my %ERRORCODES=( 0 => 'OK', 1 => 'WARNING', 2 => 'CRITICAL', 3 => 'UNKNOWN' );" >> check_mysql_health for m in Nagios/DBD/MySQL/Server/Instance/Innodb.pm Nagios/DBD/MySQL/Server/Instance/Myisam.pm Nagios/DBD/MySQL/Server/Instance/Replication.pm Nagios/DBD/MySQL/Server/Instance.pm Nagios/DBD/MySQL/Server.pm Nagios/DBD/MySQL/Cluster.pm Nagios/Extraopts.pm; do /usr/bin/sed -e 's/^1;//g' < $m | /usr/bin/awk -f ./subst | /usr/bin/grep -v "my %ERROR" >> check_mysql_health; done if [ -d "/usr/local/libexec/nagios" ]; then for m in /usr/local/libexec/nagios/CheckMySQLHealthExt*.pm; do if [ -f $m ]; then /bin/echo found $m; /usr/bin/sed -e 's/^1;//g' < $m | /usr/bin/awk -f ./subst | /usr/bin/grep -v "my %ERROR" >> check_mysql_health; fi done fi /bin/cat check_mysql_health.pl | /usr/bin/grep -v "^use Nagios" | /usr/bin/grep -v "^my %ERROR" | /usr/bin/awk -f ./subst >> check_mysql_health chmod +x check_mysql_health Making all in t =========================================================================== =================================================== ===> check_mysql_health-2.2.2 depends on package: p5-DBD-mysql>=0 - not found ===> Installing existing package /packages/All/p5-DBD-mysql-4.036.txz Installing p5-DBD-mysql-4.036... `-- Installing mysql56-client-5.6.33... | `-- Installing libedit-3.1.20150325_2,1... | | `-- Installing ncurses-6.0_5... | | `-- Extracting ncurses-6.0_5: .......... done | `-- Extracting libedit-3.1.20150325_2,1: .......... done `-- Extracting mysql56-client-5.6.33: .......... done `-- Installing p5-DBI-1.636... `-- Extracting p5-DBI-1.636: .......... done Extracting p5-DBD-mysql-4.036: .......... done Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from mysql56-client-5.6.33: * * * * * * * * * * * * * * * * * * * * * * * * Please be aware the database client is vulnerable to CVE-2015-3152 - SSL Downgrade aka "BACKRONYM". You may find more information at the following URL: http://www.vuxml.org/freebsd/36bd352d-299b-11e5-86ff-14dae9d210b8.html Although this database client is not listed as "affected", it is vulnerable and will not be receiving a patch. Please take note of this when deploying this software. * * * * * * * * * * * * * * * * * * * * * * * * ===> check_mysql_health-2.2.2 depends on package: p5-DBD-mysql>=0 - found ===> Returning to build of check_mysql_health-2.2.2 ===> check_mysql_health-2.2.2 depends on package: perl5>=5.20<5.21 - found =========================================================================== =================================================== ===> Staging for check_mysql_health-2.2.2 ===> Generating temporary packing list Making install in plugins-scripts /bin/mkdir -p '/wrkdirs/net-mgmt/check_mysql_health/stage/usr/local/libexec/nagios' install -m 555 check_mysql_health '/wrkdirs/net-mgmt/check_mysql_health/stage/usr/local/libexec/nagios' Making install in t ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for check_mysql_health-2.2.2 file sizes/checksums [4]: . done packing files [4]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for check_mysql_health-2.2.2 build of net-mgmt/check_mysql_health ended at Wed Oct 5 03:54:09 PDT 2016 build time: 00:00:13