=> Building comms/bluez-firmware build started at Wed Oct 5 06:28:56 PDT 2016 port directory: /usr/ports/comms/bluez-firmware building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: dirkx@webweaving.org ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../02//usr/ports/comms/bluez-firmware/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=bluez-firmware-1.2 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ---End OPTIONS List--- --CONFIGURE_ARGS-- --prefix=/usr/local --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- XDG_DATA_HOME=/wrkdirs/comms/bluez-firmware XDG_CONFIG_HOME=/wrkdirs/comms/bluez-firmware HOME=/wrkdirs/comms/bluez-firmware TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/comms/bluez-firmware XDG_CONFIG_HOME=/wrkdirs/comms/bluez-firmware HOME=/wrkdirs/comms/bluez-firmware TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/bluez-firmware" EXAMPLESDIR="share/examples/bluez-firmware" DATADIR="share/bluez-firmware" WWWDIR="www/bluez-firmware" ETCDIR="etc/bluez-firmware" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/bluez-firmware DOCSDIR=/usr/local/share/doc/bluez-firmware EXAMPLESDIR=/usr/local/share/examples/bluez-firmware WWWDIR=/usr/local/www/bluez-firmware ETCDIR=/usr/local/etc/bluez-firmware --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== =========================================================================== =================================================== ===> bluez-firmware-1.2 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> bluez-firmware-1.2 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of bluez-firmware-1.2 =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by bluez-firmware-1.2 for building =========================================================================== =================================================== ===> Fetching all distfiles required by bluez-firmware-1.2 for building => SHA256 Checksum OK for bluez-firmware-1.2.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by bluez-firmware-1.2 for building ===> Extracting for bluez-firmware-1.2 => SHA256 Checksum OK for bluez-firmware-1.2.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for bluez-firmware-1.2 =========================================================================== =================================================== =========================================================================== =================================================== =========================================================================== =================================================== ===> Configuring for bluez-firmware-1.2 configure: loading site script /usr/ports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... (cached) /usr/bin/awk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for a BSD-compatible install... /usr/bin/install -c configure: creating ./config.status config.status: creating Makefile =========================================================================== =================================================== ===> Building for bluez-firmware-1.2 =========================================================================== =================================================== =========================================================================== =================================================== ===> Staging for bluez-firmware-1.2 ===> Generating temporary packing list /bin/sh ./mkinstalldirs /wrkdirs/comms/bluez-firmware/stage/usr/local/lib/firmware mkdir -p -- /wrkdirs/comms/bluez-firmware/stage/usr/local/lib/firmware install -m 0644 broadcom/BCM2033-MD.hex /wrkdirs/comms/bluez-firmware/stage/usr/local/lib/firmware/BCM2033-MD.hex install -m 0644 broadcom/BCM2033-FW.bin /wrkdirs/comms/bluez-firmware/stage/usr/local/lib/firmware/BCM2033-FW.bin install -m 0644 broadcom/BCM-LEGAL.txt /wrkdirs/comms/bluez-firmware/stage/usr/local/lib/firmware/BCM-LEGAL.txt install -m 0644 st/STLC2500_R4_00_03.ptc /wrkdirs/comms/bluez-firmware/stage/usr/local/lib/firmware/STLC2500_R4_00_03.ptc install -m 0644 st/STLC2500_R4_00_06.ssf /wrkdirs/comms/bluez-firmware/stage/usr/local/lib/firmware/STLC2500_R4_00_06.ssf install -m 0644 st/STLC2500_R4_02_02_WLAN.ssf /wrkdirs/comms/bluez-firmware/stage/usr/local/lib/firmware/STLC2500_R4_02_02_WLAN.ssf install -m 0644 st/STLC2500_R4_02_04.ptc /wrkdirs/comms/bluez-firmware/stage/usr/local/lib/firmware/STLC2500_R4_02_04.ptc NOTICE ====== You need to have the ubtbcmfw(8) and ng_ubt(8) kernel modules in our kernel. This can be accomplished by adding the following lines to /boot/loader.conf: ubtbcmfw_load=yes ng_ubt_load=yes Furthermore you need to ensure that the bcmfw(1) utility downloads the firmware into the dongle on insertion. This can be done by adding the followign lines to /etc/devd.conf (devd(8) should run by default): # Requires the port BCM2033 to be installed # and the ubtbcmfw(8) and ng_ubt(8) kernel modules # to be loaded prior to insertion. # attach 100 { match "vendor" "0x0a5c"; match "product" "0x2033"; action "if test -d /usr/local/lib/firmware; then bcmfw -n $device-name -m /usr/local/lib/firmware/BCM2033-MD.hex -f /usr/local/lib/firmware/BCM2033-FW.bin; fi"; } Or alternatively load these files manually with: cd /usr/local/lib/firmware bcmfw -n ubtbcmfw0 -m BCM2033-MD.hex -f BCM2033-FW.bin you should then see the following lines in your dmesg(8): ubtbcmfw0: on uhub0 ubtbcmfw0: at uhub0 port 2 (addr 7) disconnected ubtbcmfw0: detached ubt0: on uhub0 ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2 ubt0: Interface 1 (alt.config 4) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=64; nframes=5, buffer size=320 ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for bluez-firmware-1.2 file sizes/checksums [7]: . done packing files [7]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for bluez-firmware-1.2 build of comms/bluez-firmware ended at Wed Oct 5 06:29:03 PDT 2016 build time: 00:00:07