=> Building finance/sabernetdcs-client build started at Wed Oct 5 19:09:31 PDT 2016 port directory: /usr/ports/finance/sabernetdcs-client building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: ports@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../08//usr/ports/finance/sabernetdcs-client/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=sabernetdcs-client-2.0.3_9 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ===> The following configuration options are available for sabernetdcs-client-2.0.3_9: DOCS=on: Build and/or install documentation ===> Use 'make config' to modify these settings ---End OPTIONS List--- --CONFIGURE_ARGS-- --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- PYTHON="/usr/local/bin/python2.7" XDG_DATA_HOME=/wrkdirs/finance/sabernetdcs-client XDG_CONFIG_HOME=/wrkdirs/finance/sabernetdcs-client HOME=/wrkdirs/finance/sabernetdcs-client TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/finance/sabernetdcs-client XDG_CONFIG_HOME=/wrkdirs/finance/sabernetdcs-client HOME=/wrkdirs/finance/sabernetdcs-client TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 LDSHARED="cc -shared" PYTHONDONTWRITEBYTECODE= PYTHONOPTIMIZE= PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- PYTHON_INCLUDEDIR=include/python2.7 PYTHON_LIBDIR=lib/python2.7 PYTHON_PLATFORM=dragonfly4 PYTHON_SITELIBDIR=lib/python2.7/site-packages PYTHON_VER=2.7 PYTHON_VERSION=python2.7 GTK2_VERSION="2.10.0" GTK3_VERSION="3.0.0" OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/sndcs" EXAMPLESDIR="share/examples/sabernetdcs" DATADIR="share/sndcs" WWWDIR="www/sabernetdcs" ETCDIR="etc/sabernetdcs" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/sndcs DOCSDIR=/usr/local/share/doc/sndcs EXAMPLESDIR=/usr/local/share/examples/sabernetdcs WWWDIR=/usr/local/www/sabernetdcs ETCDIR=/usr/local/etc/sabernetdcs --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== ===> NOTICE: The sabernetdcs port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2 accepted by the user =========================================================================== =================================================== ===> sabernetdcs-client-2.0.3_9 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> sabernetdcs-client-2.0.3_9 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of sabernetdcs-client-2.0.3_9 =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The sabernetdcs port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2 accepted by the user ===> Fetching all distfiles required by sabernetdcs-client-2.0.3_9 for building =========================================================================== =================================================== ===> NOTICE: The sabernetdcs port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2 accepted by the user ===> Fetching all distfiles required by sabernetdcs-client-2.0.3_9 for building => SHA256 Checksum OK for sndcs-2.0.3.tar.bz2. =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The sabernetdcs port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2 accepted by the user ===> Fetching all distfiles required by sabernetdcs-client-2.0.3_9 for building ===> Extracting for sabernetdcs-client-2.0.3_9 => SHA256 Checksum OK for sndcs-2.0.3.tar.bz2. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for sabernetdcs-client-2.0.3_9 ===> Applying ports patches for sabernetdcs-client-2.0.3_9 /usr/bin/sed -i.bak -e 's|%%PREFIX%%|/usr/local|' /wrkdirs/finance/sabernetdcs-client/sndcs-2.0.3/setup.py =========================================================================== =================================================== ===> sabernetdcs-client-2.0.3_9 depends on package: py27-setuptools27>0 - not found ===> Installing existing package /packages/All/py27-setuptools27-23.1.0.txz Installing py27-setuptools27-23.1.0... `-- Installing python27-2.7.12... | `-- Installing expat-2.2.0... | `-- Extracting expat-2.2.0: .......... done | `-- Installing readline-6.3.8... | | `-- Installing indexinfo-0.2.5... | | `-- Extracting indexinfo-0.2.5: .... done | | `-- Installing ncurses-6.0_5... | | `-- Extracting ncurses-6.0_5: .......... done | `-- Extracting readline-6.3.8: .......... done | `-- Installing libffi-3.2.1... | `-- Extracting libffi-3.2.1: .......... done | `-- Installing libressl-2.4.3... | `-- Extracting libressl-2.4.3: .......... done | `-- Installing gettext-runtime-0.19.8.1... | `-- Extracting gettext-runtime-0.19.8.1: .......... done `-- Extracting python27-2.7.12: .......... done Extracting py27-setuptools27-23.1.0: .......... done Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from python27-2.7.12: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== ===> sabernetdcs-client-2.0.3_9 depends on package: py27-setuptools27>0 - found ===> Returning to build of sabernetdcs-client-2.0.3_9 ===> sabernetdcs-client-2.0.3_9 depends on file: /usr/local/bin/python2.7 - found ===> sabernetdcs-client-2.0.3_9 depends on executable: pygobject-codegen-2.0 - not found ===> Installing existing package /packages/All/py27-gobject-2.28.6_6.txz Installing py27-gobject-2.28.6_6... `-- Installing py27-cairo-1.10.0_2... | `-- Installing cairo-1.14.6_1,2... | | `-- Installing glproto-1.4.17... | | `-- Extracting glproto-1.4.17: ...... done | | `-- Installing libEGL-11.2.2... | | `-- Installing libdevq-0.0.2_1... | | `-- Extracting libdevq-0.0.2_1: ....... done | | `-- Installing libXdamage-1.1.4_3... | | | `-- Installing libXfixes-5.0.1_3... | | | `-- Installing xproto-7.0.28... | | | `-- Extracting xproto-7.0.28: .......... done | | | `-- Installing fixesproto-5.0... | | | `-- Extracting fixesproto-5.0: .... done | | | `-- Installing libX11-1.6.3,1... | | | | `-- Installing kbproto-1.0.7... | | | | `-- Extracting kbproto-1.0.7: .......... done | | | | `-- Installing libXdmcp-1.1.2... | | | | `-- Extracting libXdmcp-1.1.2: ......... done | | | | `-- Installing libxcb-1.11.1... | | | | `-- Installing libxml2-2.9.4... | | | | `-- Extracting libxml2-2.9.4: .......... done | | | | `-- Installing libpthread-stubs-0.3_6... | | | | `-- Extracting libpthread-stubs-0.3_6: ..... done | | | | `-- Installing libXau-1.0.8_3... | | | | `-- Extracting libXau-1.0.8_3: .......... done | | | | `-- Extracting libxcb-1.11.1: .......... done | | | `-- Extracting libX11-1.6.3,1: .......... done | | | `-- Extracting libXfixes-5.0.1_3: .......... done | | | `-- Installing damageproto-1.2.1... | | | `-- Extracting damageproto-1.2.1: .... done | | `-- Extracting libXdamage-1.1.4_3: ...... done | | `-- Installing libxshmfence-1.2... | | `-- Extracting libxshmfence-1.2: ......... done | | `-- Installing libXext-1.3.3_1,1... | | | `-- Installing xextproto-7.3.0... | | | `-- Extracting xextproto-7.3.0: .......... done | | `-- Extracting libXext-1.3.3_1,1: .......... done | | `-- Installing gbm-11.2.2... | | | `-- Installing libglapi-11.2.2... | | | `-- Installing libXvMC-1.0.9... | | | | `-- Installing libXv-1.0.10_3,1... | | | | `-- Installing videoproto-2.3.2... | | | | `-- Extracting videoproto-2.3.2: ...... done | | | | `-- Extracting libXv-1.0.10_3,1: .......... done | | | `-- Extracting libXvMC-1.0.9: .......... done | | | `-- Installing libdrm-2.4.66,1... | | | | `-- Installing libpciaccess-0.13.4... | | | | `-- Installing pciids-20160621... | | | | `-- Extracting pciids-20160621: ..... done | | | | `-- Extracting libpciaccess-0.13.4: ...... done | | | `-- Extracting libdrm-2.4.66,1: .......... done | | | `-- Installing libelf-0.8.13_1... | | | `-- Extracting libelf-0.8.13_1: .......... done | | | `-- Extracting libglapi-11.2.2: ... done | | `-- Extracting gbm-11.2.2: ..... done | | `-- Installing llvm37-3.7.1_3... | | | `-- Installing perl5-5.20.3_15... | | | `-- Extracting perl5-5.20.3_15: .......... done | | | `-- Installing libedit-3.1.20150325_2,1... | | | `-- Extracting libedit-3.1.20150325_2,1: .......... done | | `-- Extracting llvm37-3.7.1_3: .......... done | | `-- Extracting libEGL-11.2.2: .......... done | | `-- Installing libXrender-0.9.9... | | `-- Installing renderproto-0.11.1... | | `-- Extracting renderproto-0.11.1: .... done | | `-- Extracting libXrender-0.9.9: .......... done | | `-- Installing libGL-11.2.2... | | `-- Installing dri2proto-2.8... | | `-- Extracting dri2proto-2.8: .... done | | `-- Installing libXxf86vm-1.1.4_1... | | | `-- Installing xf86vidmodeproto-2.3.1... | | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | | `-- Extracting libGL-11.2.2: .......... done | | `-- Installing freetype2-2.6.3... | | `-- Extracting freetype2-2.6.3: .......... done | | `-- Installing xcb-util-renderutil-0.3.9_1... | | `-- Installing xcb-util-0.4.0_1,1... | | `-- Extracting xcb-util-0.4.0_1,1: .......... done | | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done | | `-- Installing png-1.6.23... | | `-- Extracting png-1.6.23: .......... done | | `-- Installing fontconfig-2.12.1,1... | | `-- Extracting fontconfig-2.12.1,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | | `-- Installing pixman-0.34.0... | | `-- Extracting pixman-0.34.0: .......... done | | `-- Installing glib-2.46.2_3... | | `-- Installing libiconv-1.14_9... | | `-- Extracting libiconv-1.14_9: .......... done | | `-- Installing pcre-8.39... | | `-- Extracting pcre-8.39: .......... done | | `-- Extracting glib-2.46.2_3: .......... done No schema files found: doing nothing. | `-- Extracting cairo-1.14.6_1,2: .......... done | `-- Installing python2-2_3... | `-- Extracting python2-2_3: ...... done `-- Extracting py27-cairo-1.10.0_2: ...... done `-- Installing gobject-introspection-1.46.0... `-- Extracting gobject-introspection-1.46.0: .......... done Extracting py27-gobject-2.28.6_6: .......... done Message from perl5-5.20.3_15: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. ===> sabernetdcs-client-2.0.3_9 depends on executable: pygobject-codegen-2.0 - found ===> Returning to build of sabernetdcs-client-2.0.3_9 ===> sabernetdcs-client-2.0.3_9 depends on file: /usr/local/libdata/pkgconfig/pygtk-2.0.pc - not found ===> Installing existing package /packages/All/py27-gtk2-2.24.0_4.txz Installing py27-gtk2-2.24.0_4... `-- Installing gtk2-2.24.29_2... | `-- Installing hicolor-icon-theme-0.15... | `-- Extracting hicolor-icon-theme-0.15: . done | `-- Installing gtk-update-icon-cache-2.24.29... | | `-- Installing pango-1.38.0_1... | | `-- Installing encodings-1.0.4_3,1... | | | `-- Installing font-util-1.3.1... | | | `-- Extracting font-util-1.3.1: .......... done | | `-- Extracting encodings-1.0.4_3,1: .......... done | | `-- Installing libXft-2.3.2_1... | | `-- Extracting libXft-2.3.2_1: ......... done | | `-- Installing harfbuzz-1.3.2... | | | `-- Installing icu-57.1,1... | | | `-- Extracting icu-57.1,1: .......... done | | | `-- Installing graphite2-1.3.8... | | | `-- Extracting graphite2-1.3.8: .......... done | | `-- Extracting harfbuzz-1.3.2: .......... done | | `-- Installing xorg-fonts-truetype-7.7_1... | | | `-- Installing font-misc-meltho-1.0.3_3... | | | `-- Installing mkfontdir-1.0.7... | | | | `-- Installing mkfontscale-1.1.2... | | | | `-- Installing libfontenc-1.1.3... | | | | `-- Extracting libfontenc-1.1.3: ...... done | | | | `-- Extracting mkfontscale-1.1.2: .. done | | | `-- Extracting mkfontdir-1.0.7: .. done | | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done | | | `-- Installing font-bh-ttf-1.0.3_3... | | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | | `-- Installing font-misc-ethiopic-1.0.3_3... | | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | | `-- Installing dejavu-2.35... | | | `-- Extracting dejavu-2.35: .......... done | | `-- Extracting pango-1.38.0_1: .......... done | | `-- Installing libXcursor-1.1.14_3... | | `-- Extracting libXcursor-1.1.14_3: .......... done | | `-- Installing libXinerama-1.1.3_3,1... | | `-- Installing xineramaproto-1.2.1... | | `-- Extracting xineramaproto-1.2.1: .. done | | `-- Extracting libXinerama-1.1.3_3,1: .......... done | | `-- Installing libXcomposite-0.4.4_3,1... | | `-- Installing compositeproto-0.4.2... | | `-- Extracting compositeproto-0.4.2: .... done | | `-- Extracting libXcomposite-0.4.4_3,1: .......... done | | `-- Installing libXi-1.7.6,1... | | `-- Installing inputproto-2.3.1... | | `-- Extracting inputproto-2.3.1: ..... done | | `-- Extracting libXi-1.7.6,1: .......... done | | `-- Installing atk-2.18.0... | | `-- Extracting atk-2.18.0: .......... done | | `-- Installing libXrandr-1.5.0... | | `-- Installing randrproto-1.5.0... | | `-- Extracting randrproto-1.5.0: .... done | | `-- Extracting libXrandr-1.5.0: .......... done | | `-- Installing gdk-pixbuf2-2.32.3_1... | | `-- Installing jasper-1.900.1_16... | | | `-- Installing jpeg-turbo-1.4.2... | | | `-- Extracting jpeg-turbo-1.4.2: .......... done | | `-- Extracting jasper-1.900.1_16: .......... done | | `-- Installing libXt-1.1.5,1... | | | `-- Installing libSM-1.2.2_3,1... | | | `-- Installing libICE-1.0.9_1,1... | | | `-- Extracting libICE-1.0.9_1,1: .......... done | | | `-- Extracting libSM-1.2.2_3,1: .......... done | | `-- Extracting libXt-1.1.5,1: .......... done | | `-- Installing tiff-4.0.6_2... | | | `-- Installing jbigkit-2.1_1... | | | `-- Extracting jbigkit-2.1_1: .......... done | | `-- Extracting tiff-4.0.6_2: .......... done | | `-- Extracting gdk-pixbuf2-2.32.3_1: .......... done | | `-- Installing shared-mime-info-1.5... | | `-- Extracting shared-mime-info-1.5: .......... done | `-- Extracting gtk-update-icon-cache-2.24.29: .... done | `-- Installing cups-2.1.4... | | `-- Installing avahi-app-0.6.31_5... | | `-- Installing gnome_subr-1.0... | | `-- Extracting gnome_subr-1.0: . done | | `-- Installing gdbm-1.12... | | `-- Extracting gdbm-1.12: .......... done | | `-- Installing libdaemon-0.14_1... | | `-- Extracting libdaemon-0.14_1: .......... done | | `-- Installing dbus-glib-0.104... | | | `-- Installing dbus-1.8.20... ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | | | `-- Extracting dbus-1.8.20: ......... done | | `-- Extracting dbus-glib-0.104: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. | | `-- Extracting avahi-app-0.6.31_5: .......... done | | `-- Installing gnutls-3.4.15... | | `-- Installing nettle-3.2... | | | `-- Installing gmp-5.1.3_3... | | | `-- Extracting gmp-5.1.3_3: .......... done | | `-- Extracting nettle-3.2: .......... done | | `-- Installing ca_root_nss-3.27... | | `-- Extracting ca_root_nss-3.27: ....... done | | `-- Installing libtasn1-4.9... | | `-- Extracting libtasn1-4.9: .......... done | | `-- Installing trousers-0.3.13_1... | | | `-- Installing tpm-emulator-0.7.4_1... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. | | | `-- Extracting tpm-emulator-0.7.4_1: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting trousers-0.3.13_1: .......... done | | `-- Installing p11-kit-0.23.2... | | `-- Extracting p11-kit-0.23.2: .......... done | | `-- Installing libidn-1.33_1... | | `-- Extracting libidn-1.33_1: .......... done | | `-- Extracting gnutls-3.4.15: .......... done | | `-- Installing libpaper-1.1.24.4... | | `-- Extracting libpaper-1.1.24.4: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. | `-- Extracting cups-2.1.4: .......... done | `-- Installing python-2.7_2,2... | `-- Extracting python-2.7_2,2: ..... done `-- Extracting gtk2-2.24.29_2: .......... done `-- Installing libglade2-2.6.4_8... | `-- Installing xmlcatmgr-2.2_2... | `-- Extracting xmlcatmgr-2.2_2: ......... done + Creating /usr/local/share/sgml/catalog + Registering CATALOG catalog.ports (SGML) + Creating /usr/local/share/sgml/catalog.ports + Creating /usr/local/share/xml/catalog + Registering nextCatalog catalog.ports (XML) + Creating /usr/local/share/xml/catalog.ports `-- Extracting libglade2-2.6.4_8: .......... done Extracting py27-gtk2-2.24.0_4: .......... done Message from dejavu-2.35: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.13_1: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Message from xmlcatmgr-2.2_2: The following catalogs are installed: 1) /usr/local/share/sgml/catalog The top level catalog for SGML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 2) /usr/local/share/sgml/catalog.ports This catalog is for handling SGML stuff installed under /usr/local/share/sgml. It is changed by ports/packages. 3) /usr/local/share/xml/catalog The top level catalog for XML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 4) /usr/local/share/xml/catalog.ports This catalog is for handling XML stuff installed under /usr/local/share/xml. It is changed by ports/packages. ===> sabernetdcs-client-2.0.3_9 depends on file: /usr/local/libdata/pkgconfig/pygtk-2.0.pc - found ===> Returning to build of sabernetdcs-client-2.0.3_9 =========================================================================== =================================================== ===> sabernetdcs-client-2.0.3_9 depends on shared library: libatk-1.0.so - found (/usr/local/lib/libatk-1.0.so) ===> sabernetdcs-client-2.0.3_9 depends on shared library: libglib-2.0.so - found (/usr/local/lib/libglib-2.0.so) ===> sabernetdcs-client-2.0.3_9 depends on shared library: libgtk-x11-2.0.so - found (/usr/local/lib/libgtk-x11-2.0.so) ===> sabernetdcs-client-2.0.3_9 depends on shared library: libglade-2.0.so - found (/usr/local/lib/libglade-2.0.so) ===> sabernetdcs-client-2.0.3_9 depends on shared library: libxml2.so - found (/usr/local/lib/libxml2.so) ===> sabernetdcs-client-2.0.3_9 depends on shared library: libpango-1.0.so - found (/usr/local/lib/libpango-1.0.so) =========================================================================== =================================================== ===> Configuring for sabernetdcs-client-2.0.3_9 cd /wrkdirs/finance/sabernetdcs-client/sndcs-2.0.3 && /bin/cp "/usr/ports/finance/sabernetdcs-client/files/sndcs2.conf" "sndcs/config/sndcs2.conf" =========================================================================== =================================================== ===> Building for sabernetdcs-client-2.0.3_9 running build running build_py creating build creating build/lib creating build/lib/sndcs_client copying sndcs_client/Config.py -> build/lib/sndcs_client copying sndcs_client/Subscriber.py -> build/lib/sndcs_client copying sndcs_client/HeartbeatMonitor.py -> build/lib/sndcs_client copying sndcs_client/__init__.py -> build/lib/sndcs_client creating build/lib/sndcs_common copying sndcs_common/Config.py -> build/lib/sndcs_common copying sndcs_common/Logger.py -> build/lib/sndcs_common copying sndcs_common/SndcsExceptions.py -> build/lib/sndcs_common copying sndcs_common/PyroProxyMixin.py -> build/lib/sndcs_common copying sndcs_common/MathUtilMixin.py -> build/lib/sndcs_common copying sndcs_common/DateTimeMixin.py -> build/lib/sndcs_common copying sndcs_common/__init__.py -> build/lib/sndcs_common copying sndcs_common/Win32HelperMixin.py -> build/lib/sndcs_common copying sndcs_common/TrueAndFalseMixin.py -> build/lib/sndcs_common creating build/lib/sndcs_client/gtk copying sndcs_client/gtk/CurrentActivitiesTreeView.py -> build/lib/sndcs_client/gtk copying sndcs_client/gtk/EmployeeAdminTreeView.py -> build/lib/sndcs_client/gtk copying sndcs_client/gtk/EventSubscriber.py -> build/lib/sndcs_client/gtk copying sndcs_client/gtk/IndirectActivitiesTreeView.py -> build/lib/sndcs_client/gtk copying sndcs_client/gtk/ActiveEmployeesTreeView.py -> build/lib/sndcs_client/gtk copying sndcs_client/gtk/JobAdminTreeView.py -> build/lib/sndcs_client/gtk copying sndcs_client/gtk/__init__.py -> build/lib/sndcs_client/gtk copying sndcs_client/gtk/AvailableActivitiesTreeView.py -> build/lib/sndcs_client/gtk copying sndcs_client/gtk/Application.py -> build/lib/sndcs_client/gtk creating build/lib/sndcs_client/curses copying sndcs_client/curses/__init__.py -> build/lib/sndcs_client/curses running build_scripts creating build/scripts-2.7 copying and adjusting sndcs_client/gtk/sndcs_gtk -> build/scripts-2.7 copying and adjusting sndcs_client/curses/sndcs_curses -> build/scripts-2.7 changing mode of build/scripts-2.7/sndcs_gtk from 644 to 755 changing mode of build/scripts-2.7/sndcs_curses from 644 to 755 =========================================================================== =================================================== ===> sabernetdcs-client-2.0.3_9 depends on package: py27-pyro>=0 - not found ===> Installing existing package /packages/All/py27-pyro-4.47.txz Installing py27-pyro-4.47... `-- Installing py27-serpent-1.13... `-- Extracting py27-serpent-1.13: .......... done `-- Installing py27-selectors34-1.1... | `-- Installing py27-six-1.10.0... | `-- Extracting py27-six-1.10.0: .......... done `-- Extracting py27-selectors34-1.1: .......... done Extracting py27-pyro-4.47: .......... done ===> sabernetdcs-client-2.0.3_9 depends on package: py27-pyro>=0 - found ===> Returning to build of sabernetdcs-client-2.0.3_9 ===> sabernetdcs-client-2.0.3_9 depends on package: py27-setuptools27>0 - found ===> sabernetdcs-client-2.0.3_9 depends on file: /usr/local/bin/python2.7 - found ===> sabernetdcs-client-2.0.3_9 depends on executable: pygobject-codegen-2.0 - found ===> sabernetdcs-client-2.0.3_9 depends on file: /usr/local/libdata/pkgconfig/pygtk-2.0.pc - found =========================================================================== =================================================== ===> Staging for sabernetdcs-client-2.0.3_9 ===> Generating temporary packing list running install running build running build_py running build_scripts running install_lib creating /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7 creating /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages creating /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client copying build/lib/sndcs_client/Subscriber.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client creating /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk copying build/lib/sndcs_client/gtk/CurrentActivitiesTreeView.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk copying build/lib/sndcs_client/gtk/AvailableActivitiesTreeView.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk copying build/lib/sndcs_client/gtk/JobAdminTreeView.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk copying build/lib/sndcs_client/gtk/__init__.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk copying build/lib/sndcs_client/gtk/EmployeeAdminTreeView.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk copying build/lib/sndcs_client/gtk/EventSubscriber.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk copying build/lib/sndcs_client/gtk/IndirectActivitiesTreeView.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk copying build/lib/sndcs_client/gtk/ActiveEmployeesTreeView.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk copying build/lib/sndcs_client/gtk/Application.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk creating /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/curses copying build/lib/sndcs_client/curses/__init__.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/curses copying build/lib/sndcs_client/HeartbeatMonitor.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client copying build/lib/sndcs_client/__init__.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client copying build/lib/sndcs_client/Config.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client creating /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common copying build/lib/sndcs_common/__init__.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common copying build/lib/sndcs_common/MathUtilMixin.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common copying build/lib/sndcs_common/PyroProxyMixin.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common copying build/lib/sndcs_common/SndcsExceptions.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common copying build/lib/sndcs_common/Win32HelperMixin.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common copying build/lib/sndcs_common/TrueAndFalseMixin.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common copying build/lib/sndcs_common/Logger.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common copying build/lib/sndcs_common/Config.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common copying build/lib/sndcs_common/DateTimeMixin.py -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/Subscriber.py to Subscriber.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk/CurrentActivitiesTreeView.py to CurrentActivitiesTreeView.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk/AvailableActivitiesTreeView.py to AvailableActivitiesTreeView.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk/JobAdminTreeView.py to JobAdminTreeView.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk/__init__.py to __init__.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk/EmployeeAdminTreeView.py to EmployeeAdminTreeView.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk/EventSubscriber.py to EventSubscriber.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk/IndirectActivitiesTreeView.py to IndirectActivitiesTreeView.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk/ActiveEmployeesTreeView.py to ActiveEmployeesTreeView.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/gtk/Application.py to Application.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/curses/__init__.py to __init__.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/HeartbeatMonitor.py to HeartbeatMonitor.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/__init__.py to __init__.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_client/Config.py to Config.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common/__init__.py to __init__.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common/MathUtilMixin.py to MathUtilMixin.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common/PyroProxyMixin.py to PyroProxyMixin.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common/SndcsExceptions.py to SndcsExceptions.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common/Win32HelperMixin.py to Win32HelperMixin.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common/TrueAndFalseMixin.py to TrueAndFalseMixin.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common/Logger.py to Logger.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common/Config.py to Config.pyc byte-compiling /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs_common/DateTimeMixin.py to DateTimeMixin.pyc writing byte-compilation script '/tmp/tmpt5FPlz.py' /usr/local/bin/python2.7 -O /tmp/tmpt5FPlz.py removing /tmp/tmpt5FPlz.py running install_data creating /wrkdirs/finance/sabernetdcs-client/stage/usr/local/etc/sndcs copying sndcs/config/sndcs2.conf -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/etc/sndcs creating /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/sndcs copying sndcs_client/gtk/sndcs2.glade -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/sndcs copying sndcs/pixmaps/sndcs.png -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/sndcs copying sndcs/pixmaps/dcs_splash.png -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/sndcs copying sndcs/config/logging.conf -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/etc/sndcs copying sndcs/pixmaps/sndcs.png -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/pixmaps creating /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs creating /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/html copying ./docs/README.html -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/html copying ./docs/INSTALL.html -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/html copying ./docs/ERRORS_AND_TROUBLESHOOTING.html -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/html copying ./docs/PLUGINS.html -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/html copying ./docs/USERS_GUIDE.html -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/html copying ./docs/RELEASE_PROCEDURES.html -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/html copying ./docs/ADMINISTRATORS_GUIDE.html -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/html creating /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/pdf copying ./docs/ADMINISTRATORS_GUIDE.pdf -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/pdf copying ./docs/USERS_GUIDE.pdf -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/pdf copying ./docs/ERRORS_AND_TROUBLESHOOTING.pdf -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/pdf copying ./docs/RELEASE_PROCEDURES.pdf -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/pdf copying ./docs/PLUGINS.pdf -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/pdf copying ./docs/README.pdf -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/pdf copying ./docs/INSTALL.pdf -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/pdf copying ./docs/GTK_Client_User_Manual.pdf -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/pdf creating /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/txt copying ./docs/RELEASE_PROCEDURES.txt -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/txt copying ./docs/README.txt -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/txt copying ./docs/INSTALL.txt -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/txt copying ./docs/PLUGINS.txt -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/txt copying ./docs/USERS_GUIDE.txt -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/txt copying ./docs/ERRORS_AND_TROUBLESHOOTING.txt -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/txt copying ./docs/ADMINISTRATORS_GUIDE.txt -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs/txt copying COPYING -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs copying README -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs copying AUTHORS -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs copying ChangeLog -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs copying NEWS -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/share/doc/sndcs running install_egg_info running egg_info creating sndcs.egg-info writing sndcs.egg-info/PKG-INFO writing top-level names to sndcs.egg-info/top_level.txt writing dependency_links to sndcs.egg-info/dependency_links.txt writing manifest file 'sndcs.egg-info/SOURCES.txt' reading manifest file 'sndcs.egg-info/SOURCES.txt' writing manifest file 'sndcs.egg-info/SOURCES.txt' Copying sndcs.egg-info to /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs-2.0.3-py2.7.egg-info running install_scripts copying build/scripts-2.7/sndcs_curses -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/bin copying build/scripts-2.7/sndcs_gtk -> /wrkdirs/finance/sabernetdcs-client/stage/usr/local/bin changing mode of /wrkdirs/finance/sabernetdcs-client/stage/usr/local/bin/sndcs_curses to 755 changing mode of /wrkdirs/finance/sabernetdcs-client/stage/usr/local/bin/sndcs_gtk to 755 writing list of installed files to '/wrkdirs/finance/sabernetdcs-client/.PLIST.pymodtmp' ====> Compressing man pages (compress-man) if [ -d "/wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs-2.0.3-py2.7.egg-info" ]; then /bin/ls /wrkdirs/finance/sabernetdcs-client/stage/usr/local/lib/python2.7/site-packages/sndcs-2.0.3-py2.7.egg-info | while read f; do echo lib/python2.7/site-packages/sndcs-2.0.3-py2.7.egg-info/${f} >> /wrkdirs/finance/sabernetdcs-client/.PLIST.mktmp; done; fi; =========================================================================== =================================================== ===> Building package for sabernetdcs-client-2.0.3_9 file sizes/checksums [111]: .. done packing files [111]: .. done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for sabernetdcs-client-2.0.3_9 build of finance/sabernetdcs-client ended at Wed Oct 5 19:10:31 PDT 2016 build time: 00:01:00