=> Building textproc/rubber build started at Wed Oct 5 17:46:02 PDT 2016 port directory: /usr/ports/textproc/rubber building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: ports@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../01//usr/ports/textproc/rubber/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=rubber-1.1_4 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ---End OPTIONS List--- --CONFIGURE_ARGS-- --prefix=/usr/local --infodir=/usr/local/info --datadir=/usr/local/lib/python2.7/site-packages --python=/usr/local/bin/python2.7 --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- MAKE=gmake PYTHON="/usr/local/bin/python2.7" XDG_DATA_HOME=/wrkdirs/textproc/rubber XDG_CONFIG_HOME=/wrkdirs/textproc/rubber HOME=/wrkdirs/textproc/rubber TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/textproc/rubber XDG_CONFIG_HOME=/wrkdirs/textproc/rubber HOME=/wrkdirs/textproc/rubber TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- PYDISTUTILS_EGGINFO="rubber-1.1-py2.7.egg-info" TEXMFDIR="share/texmf" TEXMFDISTDIR="share/texmf-dist" TEXMFLOCALDIR="share/texmf-local" TEXMFVARDIR="share/texmf-var" TEXMFCONFIGDIR="share/texmf-config" FMTUTIL_CNF="share/texmf-config/web2c/fmtutil.cnf" PYTHON_INCLUDEDIR=include/python2.7 PYTHON_LIBDIR=lib/python2.7 PYTHON_PLATFORM=dragonfly4 PYTHON_SITELIBDIR=lib/python2.7/site-packages PYTHON_VER=2.7 PYTHON_VERSION=python2.7 OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/rubber" EXAMPLESDIR="share/examples/rubber" DATADIR="share/rubber" WWWDIR="www/rubber" ETCDIR="etc/rubber" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/rubber DOCSDIR=/usr/local/share/doc/rubber EXAMPLESDIR=/usr/local/share/examples/rubber WWWDIR=/usr/local/www/rubber ETCDIR=/usr/local/etc/rubber --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== ===> NOTICE: The rubber port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2 accepted by the user =========================================================================== =================================================== ===> rubber-1.1_4 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> rubber-1.1_4 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of rubber-1.1_4 =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The rubber port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2 accepted by the user ===> Fetching all distfiles required by rubber-1.1_4 for building =========================================================================== =================================================== ===> NOTICE: The rubber port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2 accepted by the user ===> Fetching all distfiles required by rubber-1.1_4 for building => SHA256 Checksum OK for rubber-1.1.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> NOTICE: The rubber port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> License GPLv2 accepted by the user ===> Fetching all distfiles required by rubber-1.1_4 for building ===> Extracting for rubber-1.1_4 => SHA256 Checksum OK for rubber-1.1.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for rubber-1.1_4 =========================================================================== =================================================== ===> rubber-1.1_4 depends on file: /usr/local/share/texmf-var/web2c/tex/tex.fmt - not found ===> Installing existing package /packages/All/tex-formats-20150521_2.txz Installing tex-formats-20150521_2... `-- Installing tex-basic-engines-20150521... | `-- Installing png-1.6.23... | `-- Extracting png-1.6.23: .......... done | `-- Installing tex-kpathsea-6.2.1_1... | | `-- Installing indexinfo-0.2.5... | | `-- Extracting indexinfo-0.2.5: .... done | `-- Extracting tex-kpathsea-6.2.1_1: .......... done | `-- Installing tex-web2c-20150521_1... | | `-- Installing openjpeg15-1.5.2_1... | | `-- Installing tiff-4.0.6_2... | | | `-- Installing jbigkit-2.1_1... | | | `-- Extracting jbigkit-2.1_1: .......... done | | | `-- Installing jpeg-turbo-1.4.2... | | | `-- Extracting jpeg-turbo-1.4.2: .......... done | | `-- Extracting tiff-4.0.6_2: .......... done | | `-- Installing lcms2-2.7_2... | | `-- Extracting lcms2-2.7_2: .......... done | | `-- Extracting openjpeg15-1.5.2_1: .......... done | | `-- Installing cairo-1.14.6_1,2... | | `-- Installing glproto-1.4.17... | | `-- Extracting glproto-1.4.17: ...... done | | `-- Installing libEGL-11.2.2... | | | `-- Installing libdevq-0.0.2_1... | | | `-- Extracting libdevq-0.0.2_1: ....... done | | | `-- Installing libXdamage-1.1.4_3... | | | `-- Installing libXfixes-5.0.1_3... | | | | `-- Installing xproto-7.0.28... | | | | `-- Extracting xproto-7.0.28: .......... done | | | | `-- Installing fixesproto-5.0... | | | | `-- Extracting fixesproto-5.0: .... done | | | | `-- Installing libX11-1.6.3,1... | | | | `-- Installing kbproto-1.0.7... | | | | `-- Extracting kbproto-1.0.7: .......... done | | | | `-- Installing libXdmcp-1.1.2... | | | | `-- Extracting libXdmcp-1.1.2: ......... done | | | | `-- Installing libxcb-1.11.1... | | | | | `-- Installing libxml2-2.9.4... | | | | | `-- Extracting libxml2-2.9.4: .......... done | | | | | `-- Installing libpthread-stubs-0.3_6... | | | | | `-- Extracting libpthread-stubs-0.3_6: ..... done | | | | | `-- Installing libXau-1.0.8_3... | | | | | `-- Extracting libXau-1.0.8_3: .......... done | | | | `-- Extracting libxcb-1.11.1: .......... done | | | | `-- Extracting libX11-1.6.3,1: .......... done | | | `-- Extracting libXfixes-5.0.1_3: .......... done | | | `-- Installing damageproto-1.2.1... | | | `-- Extracting damageproto-1.2.1: .... done | | | `-- Extracting libXdamage-1.1.4_3: ...... done | | | `-- Installing libxshmfence-1.2... | | | `-- Extracting libxshmfence-1.2: ......... done | | | `-- Installing libXext-1.3.3_1,1... | | | `-- Installing xextproto-7.3.0... | | | `-- Extracting xextproto-7.3.0: .......... done | | | `-- Extracting libXext-1.3.3_1,1: .......... done | | | `-- Installing expat-2.2.0... | | | `-- Extracting expat-2.2.0: .......... done | | | `-- Installing gbm-11.2.2... | | | `-- Installing libglapi-11.2.2... | | | | `-- Installing libXvMC-1.0.9... | | | | `-- Installing libXv-1.0.10_3,1... | | | | | `-- Installing videoproto-2.3.2... | | | | | `-- Extracting videoproto-2.3.2: ...... done | | | | `-- Extracting libXv-1.0.10_3,1: .......... done | | | | `-- Extracting libXvMC-1.0.9: .......... done | | | | `-- Installing libdrm-2.4.66,1... | | | | `-- Installing libpciaccess-0.13.4... | | | | | `-- Installing pciids-20160621... | | | | | `-- Extracting pciids-20160621: ..... done | | | | `-- Extracting libpciaccess-0.13.4: ...... done | | | | `-- Extracting libdrm-2.4.66,1: .......... done | | | | `-- Installing libelf-0.8.13_1... | | | | `-- Installing gettext-runtime-0.19.8.1... | | | | `-- Extracting gettext-runtime-0.19.8.1: .......... done | | | | `-- Extracting libelf-0.8.13_1: .......... done | | | `-- Extracting libglapi-11.2.2: ... done | | | `-- Extracting gbm-11.2.2: ..... done | | | `-- Installing llvm37-3.7.1_3... | | | `-- Installing python27-2.7.12... | | | | `-- Installing readline-6.3.8... | | | | `-- Installing ncurses-6.0_5... | | | | `-- Extracting ncurses-6.0_5: .......... done | | | | `-- Extracting readline-6.3.8: .......... done | | | | `-- Installing libffi-3.2.1... | | | | `-- Extracting libffi-3.2.1: .......... done | | | | `-- Installing libressl-2.4.3... | | | | `-- Extracting libressl-2.4.3: .......... done | | | `-- Extracting python27-2.7.12: .......... done | | | `-- Installing perl5-5.20.3_15... | | | `-- Extracting perl5-5.20.3_15: .......... done | | | `-- Installing libedit-3.1.20150325_2,1... | | | `-- Extracting libedit-3.1.20150325_2,1: .......... done | | | `-- Extracting llvm37-3.7.1_3: .......... done | | `-- Extracting libEGL-11.2.2: .......... done | | `-- Installing libXrender-0.9.9... | | | `-- Installing renderproto-0.11.1... | | | `-- Extracting renderproto-0.11.1: .... done | | `-- Extracting libXrender-0.9.9: .......... done | | `-- Installing libGL-11.2.2... | | | `-- Installing dri2proto-2.8... | | | `-- Extracting dri2proto-2.8: .... done | | | `-- Installing libXxf86vm-1.1.4_1... | | | `-- Installing xf86vidmodeproto-2.3.1... | | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | | `-- Extracting libGL-11.2.2: .......... done | | `-- Installing freetype2-2.6.3... | | `-- Extracting freetype2-2.6.3: .......... done | | `-- Installing xcb-util-renderutil-0.3.9_1... | | | `-- Installing xcb-util-0.4.0_1,1... | | | `-- Extracting xcb-util-0.4.0_1,1: .......... done | | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done | | `-- Installing fontconfig-2.12.1,1... | | `-- Extracting fontconfig-2.12.1,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | | `-- Installing pixman-0.34.0... | | `-- Extracting pixman-0.34.0: .......... done | | `-- Installing glib-2.46.2_3... | | | `-- Installing libiconv-1.14_9... | | | `-- Extracting libiconv-1.14_9: .......... done | | | `-- Installing pcre-8.39... | | | `-- Extracting pcre-8.39: .......... done | | `-- Extracting glib-2.46.2_3: .......... done No schema files found: doing nothing. | | `-- Extracting cairo-1.14.6_1,2: .......... done | | `-- Installing tex-ptexenc-1.3.3_2... | | `-- Extracting tex-ptexenc-1.3.3_2: .......... done | | `-- Installing zziplib-0.13.62_2... | | `-- Extracting zziplib-0.13.62_2: .......... done | | `-- Installing mpfr-3.1.5... | | `-- Installing gmp-5.1.3_3... | | `-- Extracting gmp-5.1.3_3: .......... done | | `-- Extracting mpfr-3.1.5: .......... done | `-- Extracting tex-web2c-20150521_1: .......... done `-- Extracting tex-basic-engines-20150521: .......... done `-- Installing texlive-texmf-20150523_3... | `-- Installing texlive-tlmgr-20150523_2... | `-- Extracting texlive-tlmgr-20150523_2: ......... done | `-- Installing texlive-base-20150521_13... | | `-- Installing harfbuzz-1.3.2... | | `-- Installing icu-57.1,1... | | `-- Extracting icu-57.1,1: .......... done | | `-- Installing graphite2-1.3.8... | | `-- Extracting graphite2-1.3.8: .......... done | | `-- Extracting harfbuzz-1.3.2: .......... done | | `-- Installing libgd-2.2.3,1... | | `-- Extracting libgd-2.2.3,1: .......... done | | `-- Installing libpotrace-1.12... | | `-- Extracting libpotrace-1.12: ........ done | | `-- Installing teckit-2.5.1_1... | | `-- Extracting teckit-2.5.1_1: .......... done | | `-- Installing t1lib-5.1.2_4,1... | | `-- Installing libXaw-1.0.13,2... | | | `-- Installing libXpm-3.5.11_4... | | | `-- Installing libXt-1.1.5,1... | | | | `-- Installing libSM-1.2.2_3,1... | | | | `-- Installing libICE-1.0.9_1,1... | | | | `-- Extracting libICE-1.0.9_1,1: .......... done | | | | `-- Extracting libSM-1.2.2_3,1: .......... done | | | `-- Extracting libXt-1.1.5,1: .......... done | | | `-- Extracting libXpm-3.5.11_4: .......... done | | | `-- Installing libXmu-1.1.2_3,1... | | | `-- Extracting libXmu-1.1.2_3,1: .......... done | | | `-- Installing printproto-1.0.5... | | | `-- Extracting printproto-1.0.5: .... done | | | `-- Installing libXp-1.0.3,1... | | | `-- Extracting libXp-1.0.3,1: .......... done | | `-- Extracting libXaw-1.0.13,2: .......... done | | `-- Extracting t1lib-5.1.2_4,1: .......... done | | `-- Installing xpdfopen-0.86... | | `-- Extracting xpdfopen-0.86: .... done | | `-- Installing ghostscript9-agpl-base-9.16_5... | | `-- Installing cups-2.1.4... | | | `-- Installing avahi-app-0.6.31_5... | | | `-- Installing gnome_subr-1.0... | | | `-- Extracting gnome_subr-1.0: . done | | | `-- Installing gobject-introspection-1.46.0... | | | | `-- Installing python2-2_3... | | | | `-- Extracting python2-2_3: ...... done | | | `-- Extracting gobject-introspection-1.46.0: .......... done | | | `-- Installing gdbm-1.12... | | | `-- Extracting gdbm-1.12: .......... done | | | `-- Installing libdaemon-0.14_1... | | | `-- Extracting libdaemon-0.14_1: .......... done | | | `-- Installing dbus-glib-0.104... | | | | `-- Installing dbus-1.8.20... ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | | | | `-- Extracting dbus-1.8.20: ......... done | | | `-- Extracting dbus-glib-0.104: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. | | | `-- Extracting avahi-app-0.6.31_5: .......... done | | | `-- Installing gnutls-3.4.15... | | | `-- Installing nettle-3.2... | | | `-- Extracting nettle-3.2: .......... done | | | `-- Installing ca_root_nss-3.27... | | | `-- Extracting ca_root_nss-3.27: ....... done | | | `-- Installing libtasn1-4.9... | | | `-- Extracting libtasn1-4.9: .......... done | | | `-- Installing trousers-0.3.13_1... | | | | `-- Installing tpm-emulator-0.7.4_1... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. | | | | `-- Extracting tpm-emulator-0.7.4_1: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | | `-- Extracting trousers-0.3.13_1: .......... done | | | `-- Installing p11-kit-0.23.2... | | | `-- Extracting p11-kit-0.23.2: .......... done | | | `-- Installing libidn-1.33_1... | | | `-- Extracting libidn-1.33_1: .......... done | | | `-- Extracting gnutls-3.4.15: .......... done | | | `-- Installing libpaper-1.1.24.4... | | | `-- Extracting libpaper-1.1.24.4: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. | | `-- Extracting cups-2.1.4: .......... done | | `-- Installing jbig2dec-0.13... | | `-- Extracting jbig2dec-0.13: .......... done | | `-- Installing gsfonts-8.11_6... | | `-- Extracting gsfonts-8.11_6: .......... done | | `-- Extracting ghostscript9-agpl-base-9.16_5: .......... done | | `-- Installing psutils-1.17_5... | | `-- Extracting psutils-1.17_5: .......... done | | `-- Installing poppler-0.46.0_1... | | `-- Installing poppler-data-0.4.7... | | `-- Extracting poppler-data-0.4.7: .......... done | | `-- Extracting poppler-0.46.0_1: .......... done | `-- Extracting texlive-base-20150521_13: .......... done `-- Extracting texlive-texmf-20150523_3: .......... done Extracting tex-formats-20150521_2: .......... done Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from python27-2.7.12: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== Message from perl5-5.20.3_15: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Message from zziplib-0.13.62_2: ===> NOTICE: The zziplib port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.13_1: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Message from ghostscript9-agpl-base-9.16_5: Note: in order to use the script "dvipdf", dvips must be installed. This program is provided by another package print/tex-dvipsk. FAPIfontmap and FAPIcidfmap in /usr/local/share/ghostscript/9.16/Resource/Init have to be configured if you want to use FAPI feature. ===> rubber-1.1_4 depends on file: /usr/local/share/texmf-var/web2c/tex/tex.fmt - found ===> Returning to build of rubber-1.1_4 ===> rubber-1.1_4 depends on executable: gmake - not found ===> Installing existing package /packages/All/gmake-4.2.1_1.txz Installing gmake-4.2.1_1... Extracting gmake-4.2.1_1: .......... done ===> rubber-1.1_4 depends on executable: gmake - found ===> Returning to build of rubber-1.1_4 ===> rubber-1.1_4 depends on executable: makeinfo - not found ===> Installing existing package /packages/All/texinfo-6.1.20160425,1.txz Installing texinfo-6.1.20160425,1... Extracting texinfo-6.1.20160425,1: .......... done ===> rubber-1.1_4 depends on executable: makeinfo - found ===> Returning to build of rubber-1.1_4 ===> rubber-1.1_4 depends on file: /usr/local/bin/python2.7 - found ===> rubber-1.1_4 depends on executable: python2 - found =========================================================================== =================================================== =========================================================================== =================================================== ===> Configuring for rubber-1.1_4 I will use /usr/local/bin/python2.7 as the interpreter. The configure script is running, good. The Distutils are installed, good. There is a function os.fork(), good. The system seems all right, so let's configure Rubber. settings.py generated writing rubber.spec... writing Makefile... writing rubber... writing rubber-info... writing rubber-pipe... writing src/version.py... Rubber is now configured. It will use the following Python interpreter: /usr/local/bin/python2.7 It will be installed in the following directories: the main script: /usr/local/bin the modules: /usr/local/lib/python2.7/site-packages/rubber the man pages: /usr/local/man the info pages: /usr/local/info (unless you specify otherwise when running `make install') =========================================================================== =================================================== ===> Building for rubber-1.1_4 gmake[1]: Entering directory '/wrkdirs/textproc/rubber/rubber-1.1' /usr/local/bin/python2.7 setup.py build running build running build_py creating build creating build/lib creating build/lib/rubber copying src/__init__.py -> build/lib/rubber copying src/cmd_pipe.py -> build/lib/rubber copying src/cmd_info.py -> build/lib/rubber copying src/util.py -> build/lib/rubber copying src/cmdline.py -> build/lib/rubber copying src/version.py -> build/lib/rubber creating build/lib/rubber/rules copying src/rules/__init__.py -> build/lib/rubber/rules copying src/rules/mpost.py -> build/lib/rubber/rules copying src/rules/fig2dev.py -> build/lib/rubber/rules copying src/rules/shell.py -> build/lib/rubber/rules copying src/rules/eps_gz.py -> build/lib/rubber/rules copying src/rules/cweb.py -> build/lib/rubber/rules copying src/rules/lhs2TeX.py -> build/lib/rubber/rules creating build/lib/rubber/rules/latex copying src/rules/latex/vt100.py -> build/lib/rubber/rules/latex copying src/rules/latex/minitoc.py -> build/lib/rubber/rules/latex copying src/rules/latex/xr.py -> build/lib/rubber/rules/latex copying src/rules/latex/ps2pdf.py -> build/lib/rubber/rules/latex copying src/rules/latex/gz.py -> build/lib/rubber/rules/latex copying src/rules/latex/moreverb.py -> build/lib/rubber/rules/latex copying src/rules/latex/multibib.py -> build/lib/rubber/rules/latex copying src/rules/latex/makeidx.py -> build/lib/rubber/rules/latex copying src/rules/latex/dvipdfm.py -> build/lib/rubber/rules/latex copying src/rules/latex/dvips.py -> build/lib/rubber/rules/latex copying src/rules/latex/graphicx.py -> build/lib/rubber/rules/latex copying src/rules/latex/__init__.py -> build/lib/rubber/rules/latex copying src/rules/latex/listings.py -> build/lib/rubber/rules/latex copying src/rules/latex/pdftex.py -> build/lib/rubber/rules/latex copying src/rules/latex/bibtex.py -> build/lib/rubber/rules/latex copying src/rules/latex/vtex.py -> build/lib/rubber/rules/latex copying src/rules/latex/epsfig.py -> build/lib/rubber/rules/latex copying src/rules/latex/index.py -> build/lib/rubber/rules/latex copying src/rules/latex/graphics.py -> build/lib/rubber/rules/latex copying src/rules/latex/natbib.py -> build/lib/rubber/rules/latex copying src/rules/latex/combine.py -> build/lib/rubber/rules/latex copying src/rules/latex/expand.py -> build/lib/rubber/rules/latex copying src/rules/latex/verbatim.py -> build/lib/rubber/rules/latex running build_scripts creating build/scripts-2.7 copying and adjusting rubber -> build/scripts-2.7 copying and adjusting rubber-info -> build/scripts-2.7 copying and adjusting rubber-pipe -> build/scripts-2.7 changing mode of build/scripts-2.7/rubber from 644 to 755 changing mode of build/scripts-2.7/rubber-info from 644 to 755 changing mode of build/scripts-2.7/rubber-pipe from 644 to 755 cd doc && gmake all gmake[2]: Entering directory '/wrkdirs/textproc/rubber/rubber-1.1/doc' makeinfo rubber.texi gmake[2]: Leaving directory '/wrkdirs/textproc/rubber/rubber-1.1/doc' gmake[1]: Leaving directory '/wrkdirs/textproc/rubber/rubber-1.1' =========================================================================== =================================================== ===> rubber-1.1_4 depends on file: /usr/local/share/texmf-var/web2c/tex/tex.fmt - found ===> rubber-1.1_4 depends on file: /usr/local/bin/python2.7 - found ===> rubber-1.1_4 depends on executable: python2 - found ===> rubber-1.1_4 depends on executable: indexinfo - found =========================================================================== =================================================== ===> Staging for rubber-1.1_4 ===> Generating temporary packing list gmake[1]: Entering directory '/wrkdirs/textproc/rubber/rubber-1.1' /usr/local/bin/python2.7 setup.py inst /usr/local --root="/wrkdirs/textproc/rubber/stage" running install running build running build_py running build_scripts running install_lib creating /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7 creating /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages creating /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber creating /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber copying build/lib/rubber/__init__.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber copying build/lib/rubber/cmd_pipe.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber copying build/lib/rubber/cmd_info.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber copying build/lib/rubber/util.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber copying build/lib/rubber/cmdline.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber copying build/lib/rubber/version.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber creating /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules copying build/lib/rubber/rules/__init__.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules copying build/lib/rubber/rules/mpost.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules copying build/lib/rubber/rules/fig2dev.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules copying build/lib/rubber/rules/shell.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules copying build/lib/rubber/rules/eps_gz.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules copying build/lib/rubber/rules/cweb.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules copying build/lib/rubber/rules/lhs2TeX.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules creating /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/vt100.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/minitoc.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/xr.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/ps2pdf.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/gz.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/moreverb.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/multibib.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/makeidx.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/dvipdfm.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/dvips.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/graphicx.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/__init__.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/listings.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/pdftex.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/bibtex.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/vtex.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/epsfig.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/index.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/graphics.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/natbib.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/combine.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/expand.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex copying build/lib/rubber/rules/latex/verbatim.py -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/__init__.py to __init__.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/cmd_pipe.py to cmd_pipe.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/cmd_info.py to cmd_info.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/util.py to util.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/cmdline.py to cmdline.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/version.py to version.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/__init__.py to __init__.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/mpost.py to mpost.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/fig2dev.py to fig2dev.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/shell.py to shell.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/eps_gz.py to eps_gz.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/cweb.py to cweb.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/lhs2TeX.py to lhs2TeX.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/vt100.py to vt100.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/minitoc.py to minitoc.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/xr.py to xr.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/ps2pdf.py to ps2pdf.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/gz.py to gz.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/moreverb.py to moreverb.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/multibib.py to multibib.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/makeidx.py to makeidx.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/dvipdfm.py to dvipdfm.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/dvips.py to dvips.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/graphicx.py to graphicx.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/__init__.py to __init__.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/listings.py to listings.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/pdftex.py to pdftex.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/bibtex.py to bibtex.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/vtex.py to vtex.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/epsfig.py to epsfig.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/index.py to index.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/graphics.py to graphics.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/natbib.py to natbib.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/combine.py to combine.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/expand.py to expand.pyc byte-compiling /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber/rules/latex/verbatim.py to verbatim.pyc running install_scripts copying build/scripts-2.7/rubber -> /wrkdirs/textproc/rubber/stage/usr/local/bin copying build/scripts-2.7/rubber-info -> /wrkdirs/textproc/rubber/stage/usr/local/bin copying build/scripts-2.7/rubber-pipe -> /wrkdirs/textproc/rubber/stage/usr/local/bin changing mode of /wrkdirs/textproc/rubber/stage/usr/local/bin/rubber to 755 changing mode of /wrkdirs/textproc/rubber/stage/usr/local/bin/rubber-info to 755 changing mode of /wrkdirs/textproc/rubber/stage/usr/local/bin/rubber-pipe to 755 running install_data creating /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/modules copying data/modules/beamer.rub -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/modules copying data/modules/omega.rub -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/modules copying data/modules/hyperref.rub -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/modules copying data/modules/ntheroem.rub -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/modules copying data/modules/etex.rub -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/modules copying data/modules/aleph.rub -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/modules copying data/modules/minitoc-hyper.rub -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/modules copying data/modules/revtex4.rub -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/modules copying data/rules.ini -> /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber copying doc/man-en/rubber.1 -> /wrkdirs/textproc/rubber/stage/usr/local/man/man1 copying doc/man-en/rubber-info.1 -> /wrkdirs/textproc/rubber/stage/usr/local/man/man1 copying doc/man-en/rubber-pipe.1 -> /wrkdirs/textproc/rubber/stage/usr/local/man/man1 creating /wrkdirs/textproc/rubber/stage/usr/local/man/fr creating /wrkdirs/textproc/rubber/stage/usr/local/man/fr/man1 copying doc/man-fr/rubber.1 -> /wrkdirs/textproc/rubber/stage/usr/local/man/fr/man1 copying doc/man-fr/rubber-info.1 -> /wrkdirs/textproc/rubber/stage/usr/local/man/fr/man1 copying doc/man-fr/rubber-pipe.1 -> /wrkdirs/textproc/rubber/stage/usr/local/man/fr/man1 copying doc/rubber.info -> /wrkdirs/textproc/rubber/stage/usr/local/info running install_egg_info Writing /wrkdirs/textproc/rubber/stage/usr/local/lib/python2.7/site-packages/rubber/rubber-1.1-py2.7.egg-info gmake[1]: Leaving directory '/wrkdirs/textproc/rubber/rubber-1.1' ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for rubber-1.1_4 file sizes/checksums [95]: . done packing files [95]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for rubber-1.1_4 build of textproc/rubber ended at Wed Oct 5 17:47:47 PDT 2016 build time: 00:01:45