=> Building security/py-gnutls build started at Tue Oct 4 12:43:07 PDT 2016 port directory: /usr/ports/security/py-gnutls building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: lwhsu@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../08//usr/ports/security/py-gnutls/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=py27-gnutls-3.0.0 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ===> The following configuration options are available for py27-gnutls-3.0.0: EXAMPLES=on: Build and/or install examples ===> Use 'make config' to modify these settings ---End OPTIONS List--- --CONFIGURE_ARGS-- --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- PYTHON="/usr/local/bin/python2.7" XDG_DATA_HOME=/wrkdirs/security/py-gnutls XDG_CONFIG_HOME=/wrkdirs/security/py-gnutls HOME=/wrkdirs/security/py-gnutls TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/security/py-gnutls XDG_CONFIG_HOME=/wrkdirs/security/py-gnutls HOME=/wrkdirs/security/py-gnutls TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 LDSHARED="cc -shared" PYTHONDONTWRITEBYTECODE= PYTHONOPTIMIZE= PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- PYTHON_INCLUDEDIR=include/python2.7 PYTHON_LIBDIR=lib/python2.7 PYTHON_PLATFORM=dragonfly4 PYTHON_SITELIBDIR=lib/python2.7/site-packages PYTHON_VER=2.7 PYTHON_VERSION=python2.7 OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/gnutls" EXAMPLESDIR="share/examples/py-gnutls" DATADIR="share/gnutls" WWWDIR="www/gnutls" ETCDIR="etc/gnutls" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/gnutls DOCSDIR=/usr/local/share/doc/gnutls EXAMPLESDIR=/usr/local/share/examples/py-gnutls WWWDIR=/usr/local/www/gnutls ETCDIR=/usr/local/etc/gnutls --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== ===> License LGPL20 accepted by the user =========================================================================== =================================================== ===> py27-gnutls-3.0.0 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> py27-gnutls-3.0.0 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of py27-gnutls-3.0.0 =========================================================================== =================================================== =========================================================================== =================================================== ===> License LGPL20 accepted by the user ===> Fetching all distfiles required by py27-gnutls-3.0.0 for building =========================================================================== =================================================== ===> License LGPL20 accepted by the user ===> Fetching all distfiles required by py27-gnutls-3.0.0 for building => SHA256 Checksum OK for python-gnutls-3.0.0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> License LGPL20 accepted by the user ===> Fetching all distfiles required by py27-gnutls-3.0.0 for building ===> Extracting for py27-gnutls-3.0.0 => SHA256 Checksum OK for python-gnutls-3.0.0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for py27-gnutls-3.0.0 /usr/bin/sed -i.bak -e "s|include_dirs=.*|include_dirs=\['/usr/local/include'\],|" /wrkdirs/security/py-gnutls/python-gnutls-3.0.0/setup.py /usr/bin/sed -i.bak -e "s|library_dirs=.*|library_dirs=\['/usr/local/lib'\],|" /wrkdirs/security/py-gnutls/python-gnutls-3.0.0/setup.py /usr/bin/sed -i.bak -e "s|\.26||g" /wrkdirs/security/py-gnutls/python-gnutls-3.0.0/gnutls/library/functions.py =========================================================================== =================================================== ===> py27-gnutls-3.0.0 depends on package: py27-setuptools27>0 - not found ===> Installing existing package /packages/All/py27-setuptools27-23.1.0.txz Installing py27-setuptools27-23.1.0... `-- Installing python27-2.7.12... | `-- Installing expat-2.2.0... | `-- Extracting expat-2.2.0: .......... done | `-- Installing readline-6.3.8... | | `-- Installing indexinfo-0.2.5... | | `-- Extracting indexinfo-0.2.5: .... done | | `-- Installing ncurses-6.0_5... | | `-- Extracting ncurses-6.0_5: .......... done | `-- Extracting readline-6.3.8: .......... done | `-- Installing libffi-3.2.1... | `-- Extracting libffi-3.2.1: .......... done | `-- Installing libressl-2.4.3... | `-- Extracting libressl-2.4.3: .......... done | `-- Installing gettext-runtime-0.19.8.1... | `-- Extracting gettext-runtime-0.19.8.1: .......... done `-- Extracting python27-2.7.12: .......... done Extracting py27-setuptools27-23.1.0: .......... done Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from python27-2.7.12: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== ===> py27-gnutls-3.0.0 depends on package: py27-setuptools27>0 - found ===> Returning to build of py27-gnutls-3.0.0 ===> py27-gnutls-3.0.0 depends on file: /usr/local/bin/python2.7 - found =========================================================================== =================================================== ===> py27-gnutls-3.0.0 depends on shared library: libgnutls.so - not found ===> Installing existing package /packages/All/gnutls-3.4.15.txz Installing gnutls-3.4.15... `-- Installing nettle-3.2... | `-- Installing gmp-5.1.3_3... | `-- Extracting gmp-5.1.3_3: .......... done `-- Extracting nettle-3.2: .......... done `-- Installing ca_root_nss-3.27... `-- Extracting ca_root_nss-3.27: ....... done `-- Installing libtasn1-4.9... `-- Extracting libtasn1-4.9: .......... done `-- Installing trousers-0.3.13_1... | `-- Installing tpm-emulator-0.7.4_1... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. | `-- Extracting tpm-emulator-0.7.4_1: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. `-- Extracting trousers-0.3.13_1: .......... done `-- Installing p11-kit-0.23.2... `-- Extracting p11-kit-0.23.2: .......... done `-- Installing libidn-1.33_1... `-- Extracting libidn-1.33_1: .......... done Extracting gnutls-3.4.15: .......... done Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.13_1: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account ===> py27-gnutls-3.0.0 depends on shared library: libgnutls.so - found (/usr/local/lib/libgnutls.so) ===> Returning to build of py27-gnutls-3.0.0 =========================================================================== =================================================== ===> Configuring for py27-gnutls-3.0.0 running config =========================================================================== =================================================== ===> Building for py27-gnutls-3.0.0 running build running build_py creating build creating build/lib creating build/lib/gnutls copying gnutls/errors.py -> build/lib/gnutls copying gnutls/__info__.py -> build/lib/gnutls copying gnutls/crypto.py -> build/lib/gnutls copying gnutls/validators.py -> build/lib/gnutls copying gnutls/constants.py -> build/lib/gnutls copying gnutls/__init__.py -> build/lib/gnutls copying gnutls/connection.py -> build/lib/gnutls creating build/lib/gnutls/library copying gnutls/library/__init__.py -> build/lib/gnutls/library copying gnutls/library/constants.py -> build/lib/gnutls/library copying gnutls/library/errors.py -> build/lib/gnutls/library copying gnutls/library/types.py -> build/lib/gnutls/library copying gnutls/library/functions.py -> build/lib/gnutls/library creating build/lib/gnutls/interfaces copying gnutls/interfaces/__init__.py -> build/lib/gnutls/interfaces creating build/lib/gnutls/interfaces/twisted copying gnutls/interfaces/twisted/__init__.py -> build/lib/gnutls/interfaces/twisted =========================================================================== =================================================== ===> py27-gnutls-3.0.0 depends on package: py27-setuptools27>0 - found ===> py27-gnutls-3.0.0 depends on file: /usr/local/bin/python2.7 - found =========================================================================== =================================================== ===> Staging for py27-gnutls-3.0.0 ===> Generating temporary packing list running install running build running build_py running install_lib creating /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7 creating /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages creating /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls copying build/lib/gnutls/errors.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls copying build/lib/gnutls/__info__.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls copying build/lib/gnutls/crypto.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls copying build/lib/gnutls/validators.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls copying build/lib/gnutls/constants.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls copying build/lib/gnutls/__init__.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls copying build/lib/gnutls/connection.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls creating /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/library copying build/lib/gnutls/library/__init__.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/library copying build/lib/gnutls/library/constants.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/library copying build/lib/gnutls/library/errors.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/library copying build/lib/gnutls/library/types.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/library copying build/lib/gnutls/library/functions.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/library creating /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/interfaces copying build/lib/gnutls/interfaces/__init__.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/interfaces creating /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/interfaces/twisted copying build/lib/gnutls/interfaces/twisted/__init__.py -> /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/interfaces/twisted byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/errors.py to errors.pyc byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/__info__.py to __info__.pyc byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/crypto.py to crypto.pyc byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/validators.py to validators.pyc byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/constants.py to constants.pyc byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/__init__.py to __init__.pyc byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/connection.py to connection.pyc byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/library/__init__.py to __init__.pyc byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/library/constants.py to constants.pyc byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/library/errors.py to errors.pyc byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/library/types.py to types.pyc byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/library/functions.py to functions.pyc byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/interfaces/__init__.py to __init__.pyc byte-compiling /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/gnutls/interfaces/twisted/__init__.py to __init__.pyc writing byte-compilation script '/tmp/tmpWzPBzT.py' /usr/local/bin/python2.7 -O /tmp/tmpWzPBzT.py removing /tmp/tmpWzPBzT.py running install_egg_info running egg_info creating python_gnutls.egg-info writing python_gnutls.egg-info/PKG-INFO writing top-level names to python_gnutls.egg-info/top_level.txt writing dependency_links to python_gnutls.egg-info/dependency_links.txt writing manifest file 'python_gnutls.egg-info/SOURCES.txt' reading manifest file 'python_gnutls.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' writing manifest file 'python_gnutls.egg-info/SOURCES.txt' Copying python_gnutls.egg-info to /wrkdirs/security/py-gnutls/stage/usr/local/lib/python2.7/site-packages/python_gnutls-3.0.0-py2.7.egg-info running install_scripts writing list of installed files to '/wrkdirs/security/py-gnutls/.PLIST.pymodtmp' /bin/cp -R /wrkdirs/security/py-gnutls/python-gnutls-3.0.0/examples/ /wrkdirs/security/py-gnutls/stage//usr/local/share/examples/py-gnutls ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for py27-gnutls-3.0.0 file sizes/checksums [62]: . done packing files [62]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for py27-gnutls-3.0.0 build of security/py-gnutls ended at Tue Oct 4 12:43:18 PDT 2016 build time: 00:00:11