=> Building print/p5-Net-CUPS build started at Tue Oct 4 07:05:13 PDT 2016 port directory: /usr/ports/print/p5-Net-CUPS building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: vg@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../05//usr/ports/print/p5-Net-CUPS/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=p5-Net-CUPS-0.61_5 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ---End OPTIONS List--- --CONFIGURE_ARGS-- INSTALLDIRS="site" CC="cc" CCFLAGS="-pipe -O2 -fno-strict-aliasing" PREFIX="/usr/local" INSTALLPRIVLIB="/usr/local/lib" INSTALLARCHLIB="/usr/local/lib" --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- ac_cv_path_PERL=/usr/local/bin/perl ac_cv_path_PERL_PATH=/usr/local/bin/perl XDG_DATA_HOME=/wrkdirs/print/p5-Net-CUPS XDG_CONFIG_HOME=/wrkdirs/print/p5-Net-CUPS HOME=/wrkdirs/print/p5-Net-CUPS TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 PERL_EXTUTILS_AUTOINSTALL="--skipdeps" PERL_MM_USE_DEFAULT="YES" --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/print/p5-Net-CUPS XDG_CONFIG_HOME=/wrkdirs/print/p5-Net-CUPS HOME=/wrkdirs/print/p5-Net-CUPS TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PERL_VERSION=5.20.3 PERL_VER=5.20 PERL5_MAN1=lib/perl5/site_perl/man/man1 PERL5_MAN3=lib/perl5/site_perl/man/man3 SITE_PERL=lib/perl5/site_perl SITE_ARCH=lib/perl5/site_perl/mach/5.20 PROFILE="@comment " DOCSDIR="share/doc/Net-CUPS" EXAMPLESDIR="share/examples/Net-CUPS" DATADIR="share/Net-CUPS" WWWDIR="www/Net-CUPS" ETCDIR="etc/Net-CUPS" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/Net-CUPS DOCSDIR=/usr/local/share/doc/Net-CUPS EXAMPLESDIR=/usr/local/share/examples/Net-CUPS WWWDIR=/usr/local/www/Net-CUPS ETCDIR=/usr/local/etc/Net-CUPS --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== ===> License ART10 GPLv1 accepted by the user =========================================================================== =================================================== ===> p5-Net-CUPS-0.61_5 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> p5-Net-CUPS-0.61_5 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of p5-Net-CUPS-0.61_5 =========================================================================== =================================================== =========================================================================== =================================================== ===> License ART10 GPLv1 accepted by the user ===> Fetching all distfiles required by p5-Net-CUPS-0.61_5 for building =========================================================================== =================================================== ===> License ART10 GPLv1 accepted by the user ===> Fetching all distfiles required by p5-Net-CUPS-0.61_5 for building => SHA256 Checksum OK for Net-CUPS-0.61.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> License ART10 GPLv1 accepted by the user ===> Fetching all distfiles required by p5-Net-CUPS-0.61_5 for building ===> Extracting for p5-Net-CUPS-0.61_5 => SHA256 Checksum OK for Net-CUPS-0.61.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for p5-Net-CUPS-0.61_5 ===> Applying ports patches for p5-Net-CUPS-0.61_5 =========================================================================== =================================================== ===> p5-Net-CUPS-0.61_5 depends on package: perl5>=5.20<5.21 - not found ===> Installing existing package /packages/All/perl5-5.20.3_15.txz Installing perl5-5.20.3_15... Extracting perl5-5.20.3_15: .......... done Message from perl5-5.20.3_15: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. ===> p5-Net-CUPS-0.61_5 depends on package: perl5>=5.20<5.21 - found ===> Returning to build of p5-Net-CUPS-0.61_5 =========================================================================== =================================================== ===> p5-Net-CUPS-0.61_5 depends on shared library: libcupsimage.so - not found ===> Installing existing package /packages/All/cups-2.1.4.txz Installing cups-2.1.4... `-- Installing avahi-app-0.6.31_5... | `-- Installing expat-2.2.0... | `-- Extracting expat-2.2.0: .......... done | `-- Installing gnome_subr-1.0... | `-- Extracting gnome_subr-1.0: . done | `-- Installing gobject-introspection-1.46.0... | | `-- Installing glib-2.46.2_3... | | `-- Installing libiconv-1.14_9... | | `-- Extracting libiconv-1.14_9: .......... done | | `-- Installing python27-2.7.12... | | | `-- Installing readline-6.3.8... | | | `-- Installing indexinfo-0.2.5... | | | `-- Extracting indexinfo-0.2.5: .... done | | | `-- Installing ncurses-6.0_5... | | | `-- Extracting ncurses-6.0_5: .......... done | | | `-- Extracting readline-6.3.8: .......... done | | | `-- Installing libffi-3.2.1... | | | `-- Extracting libffi-3.2.1: .......... done | | | `-- Installing libressl-2.4.3... | | | `-- Extracting libressl-2.4.3: .......... done | | | `-- Installing gettext-runtime-0.19.8.1... | | | `-- Extracting gettext-runtime-0.19.8.1: .......... done | | `-- Extracting python27-2.7.12: .......... done | | `-- Installing pcre-8.39... | | `-- Extracting pcre-8.39: .......... done | | `-- Extracting glib-2.46.2_3: .......... done No schema files found: doing nothing. | | `-- Installing python2-2_3... | | `-- Extracting python2-2_3: ...... done | `-- Extracting gobject-introspection-1.46.0: .......... done | `-- Installing gdbm-1.12... | `-- Extracting gdbm-1.12: .......... done | `-- Installing libdaemon-0.14_1... | `-- Extracting libdaemon-0.14_1: .......... done | `-- Installing dbus-glib-0.104... | | `-- Installing dbus-1.8.20... | | `-- Installing libX11-1.6.3,1... | | | `-- Installing xproto-7.0.28... | | | `-- Extracting xproto-7.0.28: .......... done | | | `-- Installing kbproto-1.0.7... | | | `-- Extracting kbproto-1.0.7: .......... done | | | `-- Installing libXdmcp-1.1.2... | | | `-- Extracting libXdmcp-1.1.2: ......... done | | | `-- Installing libxcb-1.11.1... | | | `-- Installing libxml2-2.9.4... | | | `-- Extracting libxml2-2.9.4: .......... done | | | `-- Installing libpthread-stubs-0.3_6... | | | `-- Extracting libpthread-stubs-0.3_6: ..... done | | | `-- Installing libXau-1.0.8_3... | | | `-- Extracting libXau-1.0.8_3: .......... done | | | `-- Extracting libxcb-1.11.1: .......... done | | `-- Extracting libX11-1.6.3,1: .......... done | | `-- Installing libICE-1.0.9_1,1... | | `-- Extracting libICE-1.0.9_1,1: .......... done | | `-- Installing libSM-1.2.2_3,1... | | `-- Extracting libSM-1.2.2_3,1: .......... done ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | | `-- Extracting dbus-1.8.20: ......... done | `-- Extracting dbus-glib-0.104: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. `-- Extracting avahi-app-0.6.31_5: .......... done `-- Installing gnutls-3.4.15... | `-- Installing nettle-3.2... | | `-- Installing gmp-5.1.3_3... | | `-- Extracting gmp-5.1.3_3: .......... done | `-- Extracting nettle-3.2: .......... done | `-- Installing ca_root_nss-3.27... | `-- Extracting ca_root_nss-3.27: ....... done | `-- Installing libtasn1-4.9... | `-- Extracting libtasn1-4.9: .......... done | `-- Installing trousers-0.3.13_1... | | `-- Installing tpm-emulator-0.7.4_1... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. | | `-- Extracting tpm-emulator-0.7.4_1: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | `-- Extracting trousers-0.3.13_1: .......... done | `-- Installing p11-kit-0.23.2... | `-- Extracting p11-kit-0.23.2: .......... done | `-- Installing libidn-1.33_1... | `-- Extracting libidn-1.33_1: .......... done `-- Extracting gnutls-3.4.15: .......... done `-- Installing libpaper-1.1.24.4... `-- Extracting libpaper-1.1.24.4: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. Extracting cups-2.1.4: .......... done Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from python27-2.7.12: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.13_1: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account ===> p5-Net-CUPS-0.61_5 depends on shared library: libcupsimage.so - found (/usr/local/lib/libcupsimage.so) ===> Returning to build of p5-Net-CUPS-0.61_5 ===> p5-Net-CUPS-0.61_5 depends on shared library: libcupsfilters.so - not found ===> Installing existing package /packages/All/cups-filters-1.10.0_1.txz Installing cups-filters-1.10.0_1... `-- Installing qpdf-6.0.0... `-- Extracting qpdf-6.0.0: .......... done `-- Installing colord-1.2.11_1... | `-- Installing lcms2-2.7_2... | | `-- Installing jpeg-turbo-1.4.2... | | `-- Extracting jpeg-turbo-1.4.2: .......... done | | `-- Installing tiff-4.0.6_2... | | `-- Installing jbigkit-2.1_1... | | `-- Extracting jbigkit-2.1_1: .......... done | | `-- Extracting tiff-4.0.6_2: .......... done | `-- Extracting lcms2-2.7_2: .......... done | `-- Installing argyllcms-1.7.0_1... | | `-- Installing libXinerama-1.1.3_3,1... | | `-- Installing xineramaproto-1.2.1... | | `-- Extracting xineramaproto-1.2.1: .. done | | `-- Installing libXext-1.3.3_1,1... | | | `-- Installing xextproto-7.3.0... | | | `-- Extracting xextproto-7.3.0: .......... done | | `-- Extracting libXext-1.3.3_1,1: .......... done | | `-- Extracting libXinerama-1.1.3_3,1: .......... done | | `-- Installing libXScrnSaver-1.2.2_3... | | `-- Installing scrnsaverproto-1.2.2... | | `-- Extracting scrnsaverproto-1.2.2: ... done | | `-- Extracting libXScrnSaver-1.2.2_3: .......... done | | `-- Installing libXrandr-1.5.0... | | `-- Installing libXrender-0.9.9... | | | `-- Installing renderproto-0.11.1... | | | `-- Extracting renderproto-0.11.1: .... done | | `-- Extracting libXrender-0.9.9: .......... done | | `-- Installing randrproto-1.5.0... | | `-- Extracting randrproto-1.5.0: .... done | | `-- Extracting libXrandr-1.5.0: .......... done | | `-- Installing libXxf86vm-1.1.4_1... | | `-- Installing xf86vidmodeproto-2.3.1... | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | `-- Extracting argyllcms-1.7.0_1: .......... done | `-- Installing sqlite3-3.14.1_1... | `-- Extracting sqlite3-3.14.1_1: .......... done | `-- Installing polkit-0.113_1... | | `-- Installing spidermonkey170-17.0.0_1... | | `-- Installing nspr-4.13... | | `-- Extracting nspr-4.13: .......... done | | `-- Extracting spidermonkey170-17.0.0_1: .......... done ===> Creating groups. Creating group 'polkitd' with gid '565'. ===> Creating users Creating user 'polkitd' with uid '565'. | `-- Extracting polkit-0.113_1: ........ done ===> Creating groups. Creating group 'colord' with gid '970'. ===> Creating users Creating user 'colord' with uid '970'. `-- Extracting colord-1.2.11_1: .......... done `-- Installing png-1.6.23... `-- Extracting png-1.6.23: .......... done `-- Installing freetype2-2.6.3... `-- Extracting freetype2-2.6.3: .......... done `-- Installing libijs-0.35_5... `-- Extracting libijs-0.35_5: .......... done `-- Installing ghostscript9-agpl-base-9.16_5... | `-- Installing fontconfig-2.12.1,1... | `-- Extracting fontconfig-2.12.1,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | `-- Installing jbig2dec-0.13... | `-- Extracting jbig2dec-0.13: .......... done | `-- Installing gsfonts-8.11_6... | `-- Extracting gsfonts-8.11_6: .......... done `-- Extracting ghostscript9-agpl-base-9.16_5: .......... done `-- Installing poppler-0.46.0_1... | `-- Installing openjpeg15-1.5.2_1... | `-- Extracting openjpeg15-1.5.2_1: .......... done | `-- Installing cairo-1.14.6_1,2... | | `-- Installing glproto-1.4.17... | | `-- Extracting glproto-1.4.17: ...... done | | `-- Installing libEGL-11.2.2... | | `-- Installing libdevq-0.0.2_1... | | `-- Extracting libdevq-0.0.2_1: ....... done | | `-- Installing libXdamage-1.1.4_3... | | | `-- Installing libXfixes-5.0.1_3... | | | `-- Installing fixesproto-5.0... | | | `-- Extracting fixesproto-5.0: .... done | | | `-- Extracting libXfixes-5.0.1_3: .......... done | | | `-- Installing damageproto-1.2.1... | | | `-- Extracting damageproto-1.2.1: .... done | | `-- Extracting libXdamage-1.1.4_3: ...... done | | `-- Installing libxshmfence-1.2... | | `-- Extracting libxshmfence-1.2: ......... done | | `-- Installing gbm-11.2.2... | | | `-- Installing libglapi-11.2.2... | | | `-- Installing libXvMC-1.0.9... | | | | `-- Installing libXv-1.0.10_3,1... | | | | `-- Installing videoproto-2.3.2... | | | | `-- Extracting videoproto-2.3.2: ...... done | | | | `-- Extracting libXv-1.0.10_3,1: .......... done | | | `-- Extracting libXvMC-1.0.9: .......... done | | | `-- Installing libdrm-2.4.66,1... | | | | `-- Installing libpciaccess-0.13.4... | | | | `-- Installing pciids-20160621... | | | | `-- Extracting pciids-20160621: ..... done | | | | `-- Extracting libpciaccess-0.13.4: ...... done | | | `-- Extracting libdrm-2.4.66,1: .......... done | | | `-- Installing libelf-0.8.13_1... | | | `-- Extracting libelf-0.8.13_1: .......... done | | | `-- Extracting libglapi-11.2.2: ... done | | `-- Extracting gbm-11.2.2: ..... done | | `-- Installing llvm37-3.7.1_3... | | | `-- Installing libedit-3.1.20150325_2,1... | | | `-- Extracting libedit-3.1.20150325_2,1: .......... done | | `-- Extracting llvm37-3.7.1_3: .......... done | | `-- Extracting libEGL-11.2.2: .......... done | | `-- Installing libGL-11.2.2... | | `-- Installing dri2proto-2.8... | | `-- Extracting dri2proto-2.8: .... done | | `-- Extracting libGL-11.2.2: .......... done | | `-- Installing xcb-util-renderutil-0.3.9_1... | | `-- Installing xcb-util-0.4.0_1,1... | | `-- Extracting xcb-util-0.4.0_1,1: .......... done | | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done | | `-- Installing pixman-0.34.0... | | `-- Extracting pixman-0.34.0: .......... done | `-- Extracting cairo-1.14.6_1,2: .......... done | `-- Installing poppler-data-0.4.7... | `-- Extracting poppler-data-0.4.7: .......... done `-- Extracting poppler-0.46.0_1: .......... done `-- Installing poppler-utils-0.46.0... | `-- Installing poppler-glib-0.46.0... | `-- Extracting poppler-glib-0.46.0: .......... done `-- Extracting poppler-utils-0.46.0: .......... done Extracting cups-filters-1.10.0_1: .......... done Message from libijs-0.35_5: ===> NOTICE: The libijs port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from ghostscript9-agpl-base-9.16_5: Note: in order to use the script "dvipdf", dvips must be installed. This program is provided by another package print/tex-dvipsk. FAPIfontmap and FAPIcidfmap in /usr/local/share/ghostscript/9.16/Resource/Init have to be configured if you want to use FAPI feature. ===> p5-Net-CUPS-0.61_5 depends on shared library: libcupsfilters.so - found (/usr/local/lib/libcupsfilters.so) ===> Returning to build of p5-Net-CUPS-0.61_5 =========================================================================== =================================================== ===> Configuring for p5-Net-CUPS-0.61_5 Net::CUPS Configuration Running cups-config ... 2.1.4 Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Net::CUPS Writing MYMETA.yml and MYMETA.json =========================================================================== =================================================== ===> Building for p5-Net-CUPS-0.61_5 --- blib/lib/Net/.exists --- --- blib/arch/.exists --- --- blib/lib/auto/Net/CUPS/.exists --- --- blib/arch/auto/Net/CUPS/.exists --- --- blib/bin/.exists --- --- blib/script/.exists --- --- blib/man1/.exists --- --- blib/man3/.exists --- --- subdirs --- --- CUPS.c --- /usr/local/bin/perl5.20.3 /usr/local/lib/perl5/5.20/ExtUtils/xsubpp -typemap /usr/local/lib/perl5/5.20/ExtUtils/typemap -typemap typemap CUPS.xs > CUPS.xsc && mv CUPS.xsc CUPS.c --- CUPS.bs --- Running Mkbootstrap for Net::CUPS () chmod 644 CUPS.bs --- pm_to_blib --- --- blibdirs --- --- config --- --- pm_to_blib --- cp lib/Net/CUPS/Destination.pm blib/lib/Net/CUPS/Destination.pm AutoSplitting blib/lib/Net/CUPS/Destination.pm (blib/lib/auto/Net/CUPS/Destination) cp lib/Net/CUPS/IPP.pm blib/lib/Net/CUPS/IPP.pm AutoSplitting blib/lib/Net/CUPS/IPP.pm (blib/lib/auto/Net/CUPS/IPP) cp lib/Net/CUPS.pm blib/lib/Net/CUPS.pm AutoSplitting blib/lib/Net/CUPS.pm (blib/lib/auto/Net/CUPS) cp lib/Net/CUPS/PPD.pm blib/lib/Net/CUPS/PPD.pm AutoSplitting blib/lib/Net/CUPS/PPD.pm (blib/lib/auto/Net/CUPS/PPD) --- CUPS.o --- cc -c -I/usr/local/include -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -DVERSION=\"0.61\" -DXS_VERSION=\"0.61\" -DPIC -fPIC "-I/usr/local/lib/perl5/5.20/mach/CORE" CUPS.c CUPS.xs: In function 'XS_Net__CUPS_NETCUPS_getDestination': CUPS.xs:137:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] name = cupsGetDefault(); ^ CUPS.xs: In function 'XS_Net__CUPS_NETCUPS_getPPDFileName': CUPS.xs:378:12: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] tmpppd = ippGetString(attr, 0, NULL); ^ --- blib/arch/auto/Net/CUPS/CUPS.so --- rm -f blib/arch/auto/Net/CUPS/CUPS.so LD_RUN_PATH="/usr/local/lib" cc -shared -L/usr/local/lib/perl5/5.20/mach/CORE -lperl -L/usr/local/lib -fstack-protector CUPS.o -o blib/arch/auto/Net/CUPS/CUPS.so -lcups chmod 755 blib/arch/auto/Net/CUPS/CUPS.so /usr/local/bin/perl5.20.3 -MExtUtils::Command::MM -e 'cp_nonempty' -- CUPS.bs blib/arch/auto/Net/CUPS/CUPS.bs 644 --- dynamic --- --- linkext --- --- pure_all --- --- manifypods --- Manifying blib/man3/Net::CUPS.3 Manifying blib/man3/Net::CUPS::Destination.3 Manifying blib/man3/Net::CUPS::IPP.3 Manifying blib/man3/Net::CUPS::PPD.3 --- all --- =========================================================================== =================================================== ===> p5-Net-CUPS-0.61_5 depends on package: perl5>=5.20<5.21 - found =========================================================================== =================================================== ===> Staging for p5-Net-CUPS-0.61_5 ===> Generating temporary packing list Running Mkbootstrap for Net::CUPS () chmod 644 CUPS.bs Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /wrkdirs/print/p5-Net-CUPS/stage/usr/local/lib/perl5/site_perl/mach/5.20/auto/Net/CUPS/CUPS.so Installing /wrkdirs/print/p5-Net-CUPS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Net/CUPS.pm Installing /wrkdirs/print/p5-Net-CUPS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Net/CUPS/PPD.pm Installing /wrkdirs/print/p5-Net-CUPS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Net/CUPS/Destination.pm Installing /wrkdirs/print/p5-Net-CUPS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Net/CUPS/IPP.pm Installing /wrkdirs/print/p5-Net-CUPS/stage/usr/local/lib/perl5/site_perl/mach/5.20/auto/Net/CUPS/autosplit.ix Installing /wrkdirs/print/p5-Net-CUPS/stage/usr/local/lib/perl5/site_perl/mach/5.20/auto/Net/CUPS/IPP/autosplit.ix Installing /wrkdirs/print/p5-Net-CUPS/stage/usr/local/lib/perl5/site_perl/mach/5.20/auto/Net/CUPS/PPD/autosplit.ix Installing /wrkdirs/print/p5-Net-CUPS/stage/usr/local/lib/perl5/site_perl/mach/5.20/auto/Net/CUPS/Destination/autosplit.ix Installing /wrkdirs/print/p5-Net-CUPS/stage/usr/local/lib/perl5/site_perl/man/man3/Net::CUPS::IPP.3 Installing /wrkdirs/print/p5-Net-CUPS/stage/usr/local/lib/perl5/site_perl/man/man3/Net::CUPS::Destination.3 Installing /wrkdirs/print/p5-Net-CUPS/stage/usr/local/lib/perl5/site_perl/man/man3/Net::CUPS.3 Installing /wrkdirs/print/p5-Net-CUPS/stage/usr/local/lib/perl5/site_perl/man/man3/Net::CUPS::PPD.3 ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for p5-Net-CUPS-0.61_5 file sizes/checksums [18]: . done packing files [18]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for p5-Net-CUPS-0.61_5 build of print/p5-Net-CUPS ended at Tue Oct 4 07:06:08 PDT 2016 build time: 00:00:55