=> Building x11-toolkits/p5-Gnome2-VFS build started at Mon Oct 3 22:11:20 PDT 2016 port directory: /usr/ports/x11-toolkits/p5-Gnome2-VFS building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: perl@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../03//usr/ports/x11-toolkits/p5-Gnome2-VFS/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=p5-Gnome2-VFS-1.082_1 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ---End OPTIONS List--- --CONFIGURE_ARGS-- INSTALLDIRS="site" CC="cc" CCFLAGS="-pipe -O2 -fno-strict-aliasing" PREFIX="/usr/local" INSTALLPRIVLIB="/usr/local/lib" INSTALLARCHLIB="/usr/local/lib" --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- ac_cv_path_PERL=/usr/local/bin/perl ac_cv_path_PERL_PATH=/usr/local/bin/perl PKG_CONFIG=pkgconf XDG_DATA_HOME=/wrkdirs/x11-toolkits/p5-Gnome2-VFS XDG_CONFIG_HOME=/wrkdirs/x11-toolkits/p5-Gnome2-VFS HOME=/wrkdirs/x11-toolkits/p5-Gnome2-VFS TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 PERL_EXTUTILS_AUTOINSTALL="--skipdeps" PERL_MM_USE_DEFAULT="YES" --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/x11-toolkits/p5-Gnome2-VFS XDG_CONFIG_HOME=/wrkdirs/x11-toolkits/p5-Gnome2-VFS HOME=/wrkdirs/x11-toolkits/p5-Gnome2-VFS TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- GTK2_VERSION="2.10.0" GTK3_VERSION="3.0.0" OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PERL_VERSION=5.20.3 PERL_VER=5.20 PERL5_MAN1=lib/perl5/site_perl/man/man1 PERL5_MAN3=lib/perl5/site_perl/man/man3 SITE_PERL=lib/perl5/site_perl SITE_ARCH=lib/perl5/site_perl/mach/5.20 PROFILE="@comment " DOCSDIR="share/doc/Gnome2-VFS" EXAMPLESDIR="share/examples/Gnome2-VFS" DATADIR="share/Gnome2-VFS" WWWDIR="www/Gnome2-VFS" ETCDIR="etc/Gnome2-VFS" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/Gnome2-VFS DOCSDIR=/usr/local/share/doc/Gnome2-VFS EXAMPLESDIR=/usr/local/share/examples/Gnome2-VFS WWWDIR=/usr/local/www/Gnome2-VFS ETCDIR=/usr/local/etc/Gnome2-VFS --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== =========================================================================== =================================================== ===> p5-Gnome2-VFS-1.082_1 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> p5-Gnome2-VFS-1.082_1 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of p5-Gnome2-VFS-1.082_1 =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by p5-Gnome2-VFS-1.082_1 for building =========================================================================== =================================================== ===> Fetching all distfiles required by p5-Gnome2-VFS-1.082_1 for building => SHA256 Checksum OK for Gnome2-VFS-1.082.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by p5-Gnome2-VFS-1.082_1 for building ===> Extracting for p5-Gnome2-VFS-1.082_1 => SHA256 Checksum OK for Gnome2-VFS-1.082.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for p5-Gnome2-VFS-1.082_1 =========================================================================== =================================================== ===> p5-Gnome2-VFS-1.082_1 depends on package: p5-ExtUtils-Depends>=0 - not found ===> Installing existing package /packages/All/p5-ExtUtils-Depends-0.405.txz Installing p5-ExtUtils-Depends-0.405... `-- Installing perl5-5.20.3_15... `-- Extracting perl5-5.20.3_15: .......... done Extracting p5-ExtUtils-Depends-0.405: ....... done Message from perl5-5.20.3_15: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. ===> p5-Gnome2-VFS-1.082_1 depends on package: p5-ExtUtils-Depends>=0 - found ===> Returning to build of p5-Gnome2-VFS-1.082_1 ===> p5-Gnome2-VFS-1.082_1 depends on package: p5-ExtUtils-PkgConfig>=0 - not found ===> Installing existing package /packages/All/p5-ExtUtils-PkgConfig-1.15_1.txz Installing p5-ExtUtils-PkgConfig-1.15_1... `-- Installing pkgconf-1.0.1... `-- Extracting pkgconf-1.0.1: .......... done Extracting p5-ExtUtils-PkgConfig-1.15_1: ...... done ===> p5-Gnome2-VFS-1.082_1 depends on package: p5-ExtUtils-PkgConfig>=0 - found ===> Returning to build of p5-Gnome2-VFS-1.082_1 ===> p5-Gnome2-VFS-1.082_1 depends on package: p5-Glib2>=0 - not found ===> Installing existing package /packages/All/p5-Glib2-1.321.txz Installing p5-Glib2-1.321... `-- Installing glib-2.46.2_3... | `-- Installing libiconv-1.14_9... | `-- Extracting libiconv-1.14_9: .......... done | `-- Installing python27-2.7.12... | | `-- Installing expat-2.2.0... | | `-- Extracting expat-2.2.0: .......... done | | `-- Installing readline-6.3.8... | | `-- Installing indexinfo-0.2.5... | | `-- Extracting indexinfo-0.2.5: .... done | | `-- Installing ncurses-6.0_5... | | `-- Extracting ncurses-6.0_5: .......... done | | `-- Extracting readline-6.3.8: .......... done | | `-- Installing libffi-3.2.1... | | `-- Extracting libffi-3.2.1: .......... done | | `-- Installing libressl-2.4.3... | | `-- Extracting libressl-2.4.3: .......... done | | `-- Installing gettext-runtime-0.19.8.1... | | `-- Extracting gettext-runtime-0.19.8.1: .......... done | `-- Extracting python27-2.7.12: .......... done | `-- Installing pcre-8.39... | `-- Extracting pcre-8.39: .......... done `-- Extracting glib-2.46.2_3: .......... done No schema files found: doing nothing. Extracting p5-Glib2-1.321: .......... done Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from python27-2.7.12: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== ===> p5-Gnome2-VFS-1.082_1 depends on package: p5-Glib2>=0 - found ===> Returning to build of p5-Gnome2-VFS-1.082_1 ===> p5-Gnome2-VFS-1.082_1 depends on package: p5-Gtk2>=0 - not found ===> Installing existing package /packages/All/p5-Gtk2-1.2498.txz Installing p5-Gtk2-1.2498... `-- Installing p5-Cairo-1.106... | `-- Installing cairo-1.14.6_1,2... | | `-- Installing glproto-1.4.17... | | `-- Extracting glproto-1.4.17: ...... done | | `-- Installing libEGL-11.2.2... | | `-- Installing libdevq-0.0.2_1... | | `-- Extracting libdevq-0.0.2_1: ....... done | | `-- Installing libXdamage-1.1.4_3... | | | `-- Installing libXfixes-5.0.1_3... | | | `-- Installing xproto-7.0.28... | | | `-- Extracting xproto-7.0.28: .......... done | | | `-- Installing fixesproto-5.0... | | | `-- Extracting fixesproto-5.0: .... done | | | `-- Installing libX11-1.6.3,1... | | | | `-- Installing kbproto-1.0.7... | | | | `-- Extracting kbproto-1.0.7: .......... done | | | | `-- Installing libXdmcp-1.1.2... | | | | `-- Extracting libXdmcp-1.1.2: ......... done | | | | `-- Installing libxcb-1.11.1... | | | | `-- Installing libxml2-2.9.4... | | | | `-- Extracting libxml2-2.9.4: .......... done | | | | `-- Installing libpthread-stubs-0.3_6... | | | | `-- Extracting libpthread-stubs-0.3_6: ..... done | | | | `-- Installing libXau-1.0.8_3... | | | | `-- Extracting libXau-1.0.8_3: .......... done | | | | `-- Extracting libxcb-1.11.1: .......... done | | | `-- Extracting libX11-1.6.3,1: .......... done | | | `-- Extracting libXfixes-5.0.1_3: .......... done | | | `-- Installing damageproto-1.2.1... | | | `-- Extracting damageproto-1.2.1: .... done | | `-- Extracting libXdamage-1.1.4_3: ...... done | | `-- Installing libxshmfence-1.2... | | `-- Extracting libxshmfence-1.2: ......... done | | `-- Installing libXext-1.3.3_1,1... | | | `-- Installing xextproto-7.3.0... | | | `-- Extracting xextproto-7.3.0: .......... done | | `-- Extracting libXext-1.3.3_1,1: .......... done | | `-- Installing gbm-11.2.2... | | | `-- Installing libglapi-11.2.2... | | | `-- Installing libXvMC-1.0.9... | | | | `-- Installing libXv-1.0.10_3,1... | | | | `-- Installing videoproto-2.3.2... | | | | `-- Extracting videoproto-2.3.2: ...... done | | | | `-- Extracting libXv-1.0.10_3,1: .......... done | | | `-- Extracting libXvMC-1.0.9: .......... done | | | `-- Installing libdrm-2.4.66,1... | | | | `-- Installing libpciaccess-0.13.4... | | | | `-- Installing pciids-20160621... | | | | `-- Extracting pciids-20160621: ..... done | | | | `-- Extracting libpciaccess-0.13.4: ...... done | | | `-- Extracting libdrm-2.4.66,1: .......... done | | | `-- Installing libelf-0.8.13_1... | | | `-- Extracting libelf-0.8.13_1: .......... done | | | `-- Extracting libglapi-11.2.2: ... done | | `-- Extracting gbm-11.2.2: ..... done | | `-- Installing llvm37-3.7.1_3... | | | `-- Installing libedit-3.1.20150325_2,1... | | | `-- Extracting libedit-3.1.20150325_2,1: .......... done | | `-- Extracting llvm37-3.7.1_3: .......... done | | `-- Extracting libEGL-11.2.2: .......... done | | `-- Installing libXrender-0.9.9... | | `-- Installing renderproto-0.11.1... | | `-- Extracting renderproto-0.11.1: .... done | | `-- Extracting libXrender-0.9.9: .......... done | | `-- Installing libGL-11.2.2... | | `-- Installing dri2proto-2.8... | | `-- Extracting dri2proto-2.8: .... done | | `-- Installing libXxf86vm-1.1.4_1... | | | `-- Installing xf86vidmodeproto-2.3.1... | | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | | `-- Extracting libGL-11.2.2: .......... done | | `-- Installing freetype2-2.6.3... | | `-- Extracting freetype2-2.6.3: .......... done | | `-- Installing xcb-util-renderutil-0.3.9_1... | | `-- Installing xcb-util-0.4.0_1,1... | | `-- Extracting xcb-util-0.4.0_1,1: .......... done | | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done | | `-- Installing png-1.6.23... | | `-- Extracting png-1.6.23: .......... done | | `-- Installing fontconfig-2.12.1,1... | | `-- Extracting fontconfig-2.12.1,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | | `-- Installing pixman-0.34.0... | | `-- Extracting pixman-0.34.0: .......... done | `-- Extracting cairo-1.14.6_1,2: .......... done `-- Extracting p5-Cairo-1.106: .......... done `-- Installing gtk2-2.24.29_2... | `-- Installing hicolor-icon-theme-0.15... | `-- Extracting hicolor-icon-theme-0.15: . done | `-- Installing gtk-update-icon-cache-2.24.29... | | `-- Installing pango-1.38.0_1... | | `-- Installing encodings-1.0.4_3,1... | | | `-- Installing font-util-1.3.1... | | | `-- Extracting font-util-1.3.1: .......... done | | `-- Extracting encodings-1.0.4_3,1: .......... done | | `-- Installing libXft-2.3.2_1... | | `-- Extracting libXft-2.3.2_1: ......... done | | `-- Installing harfbuzz-1.3.2... | | | `-- Installing icu-57.1,1... | | | `-- Extracting icu-57.1,1: .......... done | | | `-- Installing graphite2-1.3.8... | | | `-- Extracting graphite2-1.3.8: .......... done | | `-- Extracting harfbuzz-1.3.2: .......... done | | `-- Installing xorg-fonts-truetype-7.7_1... | | | `-- Installing font-misc-meltho-1.0.3_3... | | | `-- Installing mkfontdir-1.0.7... | | | | `-- Installing mkfontscale-1.1.2... | | | | `-- Installing libfontenc-1.1.3... | | | | `-- Extracting libfontenc-1.1.3: ...... done | | | | `-- Extracting mkfontscale-1.1.2: .. done | | | `-- Extracting mkfontdir-1.0.7: .. done | | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done | | | `-- Installing font-bh-ttf-1.0.3_3... | | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | | `-- Installing font-misc-ethiopic-1.0.3_3... | | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | | `-- Installing dejavu-2.35... | | | `-- Extracting dejavu-2.35: .......... done | | `-- Extracting pango-1.38.0_1: .......... done | | `-- Installing libXcursor-1.1.14_3... | | `-- Extracting libXcursor-1.1.14_3: .......... done | | `-- Installing libXinerama-1.1.3_3,1... | | `-- Installing xineramaproto-1.2.1... | | `-- Extracting xineramaproto-1.2.1: .. done | | `-- Extracting libXinerama-1.1.3_3,1: .......... done | | `-- Installing libXcomposite-0.4.4_3,1... | | `-- Installing compositeproto-0.4.2... | | `-- Extracting compositeproto-0.4.2: .... done | | `-- Extracting libXcomposite-0.4.4_3,1: .......... done | | `-- Installing libXi-1.7.6,1... | | `-- Installing inputproto-2.3.1... | | `-- Extracting inputproto-2.3.1: ..... done | | `-- Extracting libXi-1.7.6,1: .......... done | | `-- Installing atk-2.18.0... | | `-- Extracting atk-2.18.0: .......... done | | `-- Installing libXrandr-1.5.0... | | `-- Installing randrproto-1.5.0... | | `-- Extracting randrproto-1.5.0: .... done | | `-- Extracting libXrandr-1.5.0: .......... done | | `-- Installing gdk-pixbuf2-2.32.3_1... | | `-- Installing jasper-1.900.1_16... | | | `-- Installing jpeg-turbo-1.4.2... | | | `-- Extracting jpeg-turbo-1.4.2: .......... done | | `-- Extracting jasper-1.900.1_16: .......... done | | `-- Installing libXt-1.1.5,1... | | | `-- Installing libSM-1.2.2_3,1... | | | `-- Installing libICE-1.0.9_1,1... | | | `-- Extracting libICE-1.0.9_1,1: .......... done | | | `-- Extracting libSM-1.2.2_3,1: .......... done | | `-- Extracting libXt-1.1.5,1: .......... done | | `-- Installing tiff-4.0.6_2... | | | `-- Installing jbigkit-2.1_1... | | | `-- Extracting jbigkit-2.1_1: .......... done | | `-- Extracting tiff-4.0.6_2: .......... done | | `-- Extracting gdk-pixbuf2-2.32.3_1: .......... done | | `-- Installing shared-mime-info-1.5... | | `-- Extracting shared-mime-info-1.5: .......... done | `-- Extracting gtk-update-icon-cache-2.24.29: .... done | `-- Installing cups-2.1.4... | | `-- Installing avahi-app-0.6.31_5... | | `-- Installing gnome_subr-1.0... | | `-- Extracting gnome_subr-1.0: . done | | `-- Installing gobject-introspection-1.46.0... | | | `-- Installing python2-2_3... | | | `-- Extracting python2-2_3: ...... done | | `-- Extracting gobject-introspection-1.46.0: .......... done | | `-- Installing gdbm-1.12... | | `-- Extracting gdbm-1.12: .......... done | | `-- Installing libdaemon-0.14_1... | | `-- Extracting libdaemon-0.14_1: .......... done | | `-- Installing dbus-glib-0.104... | | | `-- Installing dbus-1.8.20... ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | | | `-- Extracting dbus-1.8.20: ......... done | | `-- Extracting dbus-glib-0.104: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. | | `-- Extracting avahi-app-0.6.31_5: .......... done | | `-- Installing gnutls-3.4.15... | | `-- Installing nettle-3.2... | | | `-- Installing gmp-5.1.3_3... | | | `-- Extracting gmp-5.1.3_3: .......... done | | `-- Extracting nettle-3.2: .......... done | | `-- Installing ca_root_nss-3.27... | | `-- Extracting ca_root_nss-3.27: ....... done | | `-- Installing libtasn1-4.9... | | `-- Extracting libtasn1-4.9: .......... done | | `-- Installing trousers-0.3.13_1... | | | `-- Installing tpm-emulator-0.7.4_1... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. | | | `-- Extracting tpm-emulator-0.7.4_1: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting trousers-0.3.13_1: .......... done | | `-- Installing p11-kit-0.23.2... | | `-- Extracting p11-kit-0.23.2: .......... done | | `-- Installing libidn-1.33_1... | | `-- Extracting libidn-1.33_1: .......... done | | `-- Extracting gnutls-3.4.15: .......... done | | `-- Installing libpaper-1.1.24.4... | | `-- Extracting libpaper-1.1.24.4: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. | `-- Extracting cups-2.1.4: .......... done | `-- Installing python-2.7_2,2... | `-- Extracting python-2.7_2,2: ..... done `-- Extracting gtk2-2.24.29_2: .......... done `-- Installing p5-Pango-1.227... `-- Extracting p5-Pango-1.227: .......... done Extracting p5-Gtk2-1.2498: .......... done Message from dejavu-2.35: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.13_1: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account ===> p5-Gnome2-VFS-1.082_1 depends on package: p5-Gtk2>=0 - found ===> Returning to build of p5-Gnome2-VFS-1.082_1 ===> p5-Gnome2-VFS-1.082_1 depends on package: pkgconf>=0.9.10 - found ===> p5-Gnome2-VFS-1.082_1 depends on file: /usr/local/libdata/pkgconfig/gnome-mime-data-2.0.pc - not found ===> Installing existing package /packages/All/gnome-mime-data-2.18.0_5.txz Installing gnome-mime-data-2.18.0_5... Extracting gnome-mime-data-2.18.0_5: .......... done ===> p5-Gnome2-VFS-1.082_1 depends on file: /usr/local/libdata/pkgconfig/gnome-mime-data-2.0.pc - found ===> Returning to build of p5-Gnome2-VFS-1.082_1 ===> p5-Gnome2-VFS-1.082_1 depends on package: perl5>=5.20<5.21 - found =========================================================================== =================================================== ===> p5-Gnome2-VFS-1.082_1 depends on shared library: libatk-1.0.so - found (/usr/local/lib/libatk-1.0.so) ===> p5-Gnome2-VFS-1.082_1 depends on shared library: libgconf-2.so - not found ===> Installing existing package /packages/All/gconf2-3.2.6_4.txz Installing gconf2-3.2.6_4... `-- Installing ORBit2-2.14.19_1... | `-- Installing libIDL-0.8.14_2... | `-- Extracting libIDL-0.8.14_2: ......... done `-- Extracting ORBit2-2.14.19_1: .......... done `-- Installing polkit-0.113_1... | `-- Installing spidermonkey170-17.0.0_1... | | `-- Installing nspr-4.13... | | `-- Extracting nspr-4.13: .......... done | `-- Extracting spidermonkey170-17.0.0_1: .......... done ===> Creating groups. Creating group 'polkitd' with gid '565'. ===> Creating users Creating user 'polkitd' with uid '565'. `-- Extracting polkit-0.113_1: ........ done `-- Installing dconf-0.24.0_1... `-- Extracting dconf-0.24.0_1: .......... done Extracting gconf2-3.2.6_4: .......... done ===> p5-Gnome2-VFS-1.082_1 depends on shared library: libgconf-2.so - found (/usr/local/lib/libgconf-2.so) ===> Returning to build of p5-Gnome2-VFS-1.082_1 ===> p5-Gnome2-VFS-1.082_1 depends on shared library: libglib-2.0.so - found (/usr/local/lib/libglib-2.0.so) ===> p5-Gnome2-VFS-1.082_1 depends on shared library: libgnomevfs-2.so - not found ===> Installing existing package /packages/All/gnome-vfs-2.24.4_4.txz Installing gnome-vfs-2.24.4_4... `-- Installing gamin-0.1.10_8... `-- Extracting gamin-0.1.10_8: .......... done `-- Installing samba36-libsmbclient-3.6.25_2... | `-- Installing talloc-2.1.6... | `-- Extracting talloc-2.1.6: .......... done | `-- Installing tdb-1.3.9,1... | `-- Extracting tdb-1.3.9,1: .......... done | `-- Installing tevent-0.9.28... | `-- Extracting tevent-0.9.28: .......... done `-- Extracting samba36-libsmbclient-3.6.25_2: .......... done Extracting gnome-vfs-2.24.4_4: .......... done Message from gamin-0.1.10_8: =============================================================================== Gamin will only provide realtime notification of changes for at most n files, where n is the minimum value between (kern.maxfiles * 0.7) and (kern.maxfilesperproc - 200). Beyond that limit, files will be polled. If you often open several large folders with Nautilus, you might want to increase the kern.maxfiles tunable (you do not need to set kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles). For a typical desktop, add the following line to /boot/loader.conf, then reboot the system: kern.maxfiles="25000" The behavior of gamin can be controlled via the various gaminrc files. See http://www.gnome.org/~veillard/gamin/config.html on how to create these files. In particular, if you find gam_server is taking up too much CPU time polling for changes, something like the following may help in one of the gaminrc files: # reduce polling frequency to once per 10 seconds # for UFS file systems in order to lower CPU load fsset ufs poll 10 =============================================================================== ===> NOTICE: The gamin port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from samba36-libsmbclient-3.6.25_2: ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: not supported by the upstream. It is scheduled to be removed on or after 2016-04-01. ===> p5-Gnome2-VFS-1.082_1 depends on shared library: libgnomevfs-2.so - found (/usr/local/lib/libgnomevfs-2.so) ===> Returning to build of p5-Gnome2-VFS-1.082_1 ===> p5-Gnome2-VFS-1.082_1 depends on shared library: libgtk-x11-2.0.so - found (/usr/local/lib/libgtk-x11-2.0.so) ===> p5-Gnome2-VFS-1.082_1 depends on shared library: libIDL-2.so - found (/usr/local/lib/libIDL-2.so) ===> p5-Gnome2-VFS-1.082_1 depends on shared library: libxml2.so - found (/usr/local/lib/libxml2.so) ===> p5-Gnome2-VFS-1.082_1 depends on shared library: libORBit-2.so - found (/usr/local/lib/libORBit-2.so) ===> p5-Gnome2-VFS-1.082_1 depends on shared library: libpango-1.0.so - found (/usr/local/lib/libpango-1.0.so) =========================================================================== =================================================== ===> Configuring for p5-Gnome2-VFS-1.082_1 Including generated API documentation... Checking if your kit is complete... Looks good Unrecognized argument in LIBS ignored: '-pthread' Generating a Unix-style Makefile Writing Makefile for Gnome2::VFS Writing MYMETA.yml and MYMETA.json =========================================================================== =================================================== ===> Building for p5-Gnome2-VFS-1.082_1 cp build/IFiles.pm blib/arch/Gnome2/VFS/Install/Files.pm cp /wrkdirs/x11-toolkits/p5-Gnome2-VFS/Gnome2-VFS-1.082/build/vfs2perl.typemap blib/arch/Gnome2/VFS/Install/vfs2perl.typemap cp vfs2perl.h blib/arch/Gnome2/VFS/Install/vfs2perl.h cp doctypes blib/arch/Gnome2/VFS/Install/doctypes cp build/vfs2perl-gtypes.h blib/arch/Gnome2/VFS/Install/vfs2perl-gtypes.h cp build/vfs2perl-version.h blib/arch/Gnome2/VFS/Install/vfs2perl-version.h cp /wrkdirs/x11-toolkits/p5-Gnome2-VFS/Gnome2-VFS-1.082/vfs.typemap blib/arch/Gnome2/VFS/Install/vfs.typemap cp VFS.pm blib/lib/Gnome2/VFS.pm cp build/vfs2perl-autogen.h blib/arch/Gnome2/VFS/Install/vfs2perl-autogen.h Running Mkbootstrap for Gnome2::VFS () chmod 644 VFS.bs [ XS xs/GnomeVFS.xs ] [ CC xs/GnomeVFS.c ] [ XS xs/GnomeVFSApplicationRegistry.xs ] [ CC xs/GnomeVFSApplicationRegistry.c ] [ XS xs/GnomeVFSAsync.xs ] [ CC xs/GnomeVFSAsync.c ] [ XS xs/GnomeVFSDirectory.xs ] [ CC xs/GnomeVFSDirectory.c ] [ XS xs/GnomeVFSFileInfo.xs ] [ CC xs/GnomeVFSFileInfo.c ] [ XS xs/GnomeVFSInit.xs ] [ CC xs/GnomeVFSInit.c ] [ XS xs/GnomeVFSMime.xs ] [ CC xs/GnomeVFSMime.c ] [ XS xs/GnomeVFSOps.xs ] [ CC xs/GnomeVFSOps.c ] [ XS xs/GnomeVFSURI.xs ] [ CC xs/GnomeVFSURI.c ] [ XS xs/GnomeVFSUtils.xs ] [ CC xs/GnomeVFSUtils.c ] [ XS xs/GnomeVFSXfer.xs ] [ CC xs/GnomeVFSXfer.c ] [ XS xs/GnomeVFSDrive.xs ] [ CC xs/GnomeVFSDrive.c ] [ XS xs/GnomeVFSVolume.xs ] [ CC xs/GnomeVFSVolume.c ] [ XS xs/GnomeVFSVolumeMonitor.xs ] [ CC xs/GnomeVFSVolumeMonitor.c ] [ XS xs/GnomeVFSAddress.xs ] [ CC xs/GnomeVFSAddress.c ] [ XS xs/GnomeVFSDNSSD.xs ] [ CC xs/GnomeVFSDNSSD.c ] [ XS xs/GnomeVFSResolve.xs ] [ CC xs/GnomeVFSResolve.c ] [ CC vfs2perl.c ] rm -f blib/arch/auto/Gnome2/VFS/VFS.so [ LD blib/arch/auto/Gnome2/VFS/VFS.so ] chmod 755 blib/arch/auto/Gnome2/VFS/VFS.so /usr/local/bin/perl5.20.3 -MExtUtils::Command::MM -e 'cp_nonempty' -- VFS.bs blib/arch/auto/Gnome2/VFS/VFS.bs 644 /usr/local/bin/perl5.20.3 -MExtUtils::Command -e mkpath blib/lib/Gnome2/VFS/ Generating POD... Loaded 13 extra types from doctypes Loaded 8 extra types from /usr/local/lib/perl5/site_perl/mach/5.20/Glib/Install/doctypes Creating POD index... Manifying blib/man3/Gnome2::VFS::index.3 Manifying blib/man3/Gnome2::VFS::Address.3 Manifying blib/man3/Gnome2::VFS::Application.3 Manifying blib/man3/Gnome2::VFS::ApplicationRegistry.3 Manifying blib/man3/Gnome2::VFS::Async.3 Manifying blib/man3/Gnome2::VFS::Async::Handle.3 Manifying blib/man3/Gnome2::VFS::DNSSD.3 Manifying blib/man3/Gnome2::VFS::DNSSD::Browse::Handle.3 Manifying blib/man3/Gnome2::VFS::DNSSD::Resolve::Handle.3 Manifying blib/man3/Gnome2::VFS::Directory.3 Manifying blib/man3/Gnome2::VFS::Directory::Handle.3 Manifying blib/man3/Gnome2::VFS::Drive.3 Manifying blib/man3/Gnome2::VFS::FileInfo.3 Manifying blib/man3/Gnome2::VFS::Handle.3 Manifying blib/man3/Gnome2::VFS::Mime.3 Manifying blib/man3/Gnome2::VFS::Mime::Application.3 Manifying blib/man3/Gnome2::VFS::Mime::Monitor.3 Manifying blib/man3/Gnome2::VFS::Mime::Type.3 Manifying blib/man3/Gnome2::VFS::Monitor.3 Manifying blib/man3/Gnome2::VFS::Monitor::Handle.3 Manifying blib/man3/Gnome2::VFS::Resolve.3 Manifying blib/man3/Gnome2::VFS::Resolve::Handle.3 Manifying blib/man3/Gnome2::VFS::URI.3 Manifying blib/man3/Gnome2::VFS::Volume.3 Manifying blib/man3/Gnome2::VFS::VolumeMonitor.3 Manifying blib/man3/Gnome2::VFS::Xfer.3 Manifying blib/man3/Gnome2::VFS::main.3 Manifying blib/man3/Gnome2::VFS.3 =========================================================================== =================================================== ===> p5-Gnome2-VFS-1.082_1 depends on package: p5-Glib2>=0 - found ===> p5-Gnome2-VFS-1.082_1 depends on package: p5-Gtk2>=0 - found ===> p5-Gnome2-VFS-1.082_1 depends on file: /usr/local/libdata/pkgconfig/gnome-mime-data-2.0.pc - found ===> p5-Gnome2-VFS-1.082_1 depends on package: perl5>=5.20<5.21 - found =========================================================================== =================================================== ===> Staging for p5-Gnome2-VFS-1.082_1 ===> Generating temporary packing list Running Mkbootstrap for Gnome2::VFS () chmod 644 VFS.bs Manifying blib/man3/Gnome2::VFS::index.3 Manifying blib/man3/Gnome2::VFS::Address.3 Manifying blib/man3/Gnome2::VFS::Application.3 Manifying blib/man3/Gnome2::VFS::ApplicationRegistry.3 Manifying blib/man3/Gnome2::VFS::Async.3 Manifying blib/man3/Gnome2::VFS::Async::Handle.3 Manifying blib/man3/Gnome2::VFS::DNSSD.3 Manifying blib/man3/Gnome2::VFS::DNSSD::Browse::Handle.3 Manifying blib/man3/Gnome2::VFS::DNSSD::Resolve::Handle.3 Manifying blib/man3/Gnome2::VFS::Directory.3 Manifying blib/man3/Gnome2::VFS::Directory::Handle.3 Manifying blib/man3/Gnome2::VFS::Drive.3 Manifying blib/man3/Gnome2::VFS::FileInfo.3 Manifying blib/man3/Gnome2::VFS::Handle.3 Manifying blib/man3/Gnome2::VFS::Mime.3 Manifying blib/man3/Gnome2::VFS::Mime::Application.3 Manifying blib/man3/Gnome2::VFS::Mime::Monitor.3 Manifying blib/man3/Gnome2::VFS::Mime::Type.3 Manifying blib/man3/Gnome2::VFS::Monitor.3 Manifying blib/man3/Gnome2::VFS::Monitor::Handle.3 Manifying blib/man3/Gnome2::VFS::Resolve.3 Manifying blib/man3/Gnome2::VFS::Resolve::Handle.3 Manifying blib/man3/Gnome2::VFS::URI.3 Manifying blib/man3/Gnome2::VFS::Volume.3 Manifying blib/man3/Gnome2::VFS::VolumeMonitor.3 Manifying blib/man3/Gnome2::VFS::Xfer.3 Manifying blib/man3/Gnome2::VFS::main.3 Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/auto/Gnome2/VFS/VFS.so Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Install/vfs2perl-version.h Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Install/vfs2perl.h Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Install/doctypes Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Install/Files.pm Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Install/vfs2perl-gtypes.h Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Install/vfs.typemap Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Install/vfs2perl-autogen.h Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Install/vfs2perl.typemap Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS.pm Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Resolve.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Application.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Drive.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Address.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Directory.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Async.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Handle.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/DNSSD.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/main.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/VolumeMonitor.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/FileInfo.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Volume.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Mime.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Xfer.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Monitor.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/ApplicationRegistry.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/URI.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/index.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/DNSSD/Browse/Handle.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/DNSSD/Resolve/Handle.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Mime/Type.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Mime/Application.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Mime/Monitor.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Resolve/Handle.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Monitor/Handle.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Directory/Handle.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/mach/5.20/Gnome2/VFS/Async/Handle.pod Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Mime::Application.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Handle.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::DNSSD::Resolve::Handle.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Mime::Monitor.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Address.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Directory::Handle.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::DNSSD::Browse::Handle.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Drive.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Mime.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::DNSSD.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Async::Handle.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::ApplicationRegistry.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::URI.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::FileInfo.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::main.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Monitor.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Directory.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Xfer.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Mime::Type.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Monitor::Handle.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Application.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Volume.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Resolve.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Resolve::Handle.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::Async.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::VolumeMonitor.3 Installing /wrkdirs/x11-toolkits/p5-Gnome2-VFS/stage/usr/local/lib/perl5/site_perl/man/man3/Gnome2::VFS::index.3 ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for p5-Gnome2-VFS-1.082_1 file sizes/checksums [66]: . done packing files [66]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for p5-Gnome2-VFS-1.082_1 build of x11-toolkits/p5-Gnome2-VFS ended at Mon Oct 3 22:12:16 PDT 2016 build time: 00:00:56