=> Building mail/milter-greylist-devel build started at Tue Oct 4 21:36:11 PDT 2016 port directory: /usr/ports/mail/milter-greylist-devel building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: freebsd-ports@dan.me.uk ident warning: no id keywords in /build/boomdata/data/.m/bleeding-edge-default/ref/../01//usr/ports/mail/milter-greylist-devel/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400702 !!! Jail is newer than host. (Jail: 400702, Host: 400700) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/bleeding-edge-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=milter-greylist-devel-4.6 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/bleeding-edge-default/ref/.p/pool MASTERNAME=bleeding-edge-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ===> The following configuration options are available for milter-greylist-devel-4.6: CURL=on: curl support DKIM=on: Include DKIM support DOCS=on: Build and/or install documentation EXAMPLES=on: Build and/or install examples GEOIP=on: GeoIP IP location support LDAP=off: LDAP protocol support P0F=off: P0F support POSTFIX=off: Use Postfix instead of Sendmail SPF=on: Include SPF support ===> Use 'make config' to modify these settings ---End OPTIONS List--- --CONFIGURE_ARGS-- --disable-p0f306 --disable-postfix --with-libopendkim=/usr/local --with-libspf2=/usr/local --with-libGeoIP=/usr/local --with-libcurl=/usr/local --with-user=mailnull --with-libmilter=/usr/local --enable-dnsrbl --with-thread-safe-resolver --with-dumpfile=/var/milter-greylist/greylist.db --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- XDG_DATA_HOME=/wrkdirs/mail/milter-greylist-devel XDG_CONFIG_HOME=/wrkdirs/mail/milter-greylist-devel HOME=/wrkdirs/mail/milter-greylist-devel TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/mail/milter-greylist-devel XDG_CONFIG_HOME=/wrkdirs/mail/milter-greylist-devel HOME=/wrkdirs/mail/milter-greylist-devel TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -I/usr/local/include -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS=" -L/usr/local/lib -Wl,-rpath,/usr/local/lib" LIBS=" -lpthread" CXX="c++" CXXFLAGS=" -pipe -I/usr/local/include -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/milter-greylist" EXAMPLESDIR="share/examples/milter-greylist" DATADIR="share/milter-greylist" WWWDIR="www/milter-greylist" ETCDIR="etc/milter-greylist" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/milter-greylist DOCSDIR=/usr/local/share/doc/milter-greylist EXAMPLESDIR=/usr/local/share/examples/milter-greylist WWWDIR=/usr/local/www/milter-greylist ETCDIR=/usr/local/etc/milter-greylist --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== ===> License BSD3CLAUSE accepted by the user =========================================================================== =================================================== ===> milter-greylist-devel-4.6 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> milter-greylist-devel-4.6 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of milter-greylist-devel-4.6 =========================================================================== =================================================== =========================================================================== =================================================== ===> License BSD3CLAUSE accepted by the user ===> Fetching all distfiles required by milter-greylist-devel-4.6 for building =========================================================================== =================================================== ===> License BSD3CLAUSE accepted by the user ===> Fetching all distfiles required by milter-greylist-devel-4.6 for building => SHA256 Checksum OK for milter-greylist-4.6.tgz. =========================================================================== =================================================== =========================================================================== =================================================== ===> License BSD3CLAUSE accepted by the user ===> Fetching all distfiles required by milter-greylist-devel-4.6 for building ===> Extracting for milter-greylist-devel-4.6 => SHA256 Checksum OK for milter-greylist-4.6.tgz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for milter-greylist-devel-4.6 ===> Applying ports patches for milter-greylist-devel-4.6 ===> Applying DragonFly patches for milter-greylist-devel-4.6 =========================================================================== =================================================== =========================================================================== =================================================== ===> milter-greylist-devel-4.6 depends on shared library: libcurl.so - not found ===> Installing existing package /packages/All/curl-7.50.3.txz Installing curl-7.50.3... `-- Installing libressl-2.4.3... `-- Extracting libressl-2.4.3: .......... done `-- Installing ca_root_nss-3.27... `-- Extracting ca_root_nss-3.27: ....... done `-- Installing krb5-1.14.4... | `-- Installing pkgconf-1.0.1... | `-- Extracting pkgconf-1.0.1: .......... done | `-- Installing gettext-runtime-0.19.8.1... | | `-- Installing indexinfo-0.2.5... | | `-- Extracting indexinfo-0.2.5: .... done | `-- Extracting gettext-runtime-0.19.8.1: .......... done `-- Extracting krb5-1.14.4: .......... done Extracting curl-7.50.3: .......... done Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** ===> milter-greylist-devel-4.6 depends on shared library: libcurl.so - found (/usr/local/lib/libcurl.so) ===> Returning to build of milter-greylist-devel-4.6 ===> milter-greylist-devel-4.6 depends on shared library: libopendkim.so - not found ===> Installing existing package /packages/All/opendkim-2.10.3_5.txz Installing opendkim-2.10.3_5... `-- Installing perl5-5.20.3_15... `-- Extracting perl5-5.20.3_15: .......... done `-- Installing unbound-1.5.9_1... | `-- Installing expat-2.2.0... | `-- Extracting expat-2.2.0: .......... done | `-- Installing ldns-1.6.17_5... | `-- Extracting ldns-1.6.17_5: .......... done ===> Creating groups. Creating group 'unbound' with gid '59'. ===> Creating users Creating user 'unbound' with uid '59'. `-- Extracting unbound-1.5.9_1: .......... done `-- Installing lua52-5.2.4... | `-- Installing libedit-3.1.20150325_2,1... | | `-- Installing ncurses-6.0_5... | | `-- Extracting ncurses-6.0_5: .......... done | `-- Extracting libedit-3.1.20150325_2,1: .......... done `-- Extracting lua52-5.2.4: ......... done `-- Installing libmilter-8.15.2... `-- Extracting libmilter-8.15.2: .......... done Extracting opendkim-2.10.3_5: .......... done Message from perl5-5.20.3_15: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from lua52-5.2.4: ===> NOTICE: The lua52 port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from opendkim-2.10.3_5: ************************************************************************ In order to run this port, write your opendkim.conf and: if you use sendmail, add the milter socket `socketspec' in /etc/mail/.mc: INPUT_MAIL_FILTER(`dkim-filter', `S=_YOUR_SOCKET_SPEC_, F=T, T=R:2m') or if you use postfix write your milter socket `socketspec' in /usr/local/etc/postfix/main.cf: smtpd_milters = _YOUR_SOCKET_SPEC_ And to run the milter from startup, add milteropendkim_enable="YES" in your /etc/rc.conf. Extra options can be found in startup script. Note: milter sockets must be accessible from postfix/smtpd; using inet sockets might be preferred. ************************************************************************ ===> milter-greylist-devel-4.6 depends on shared library: libopendkim.so - found (/usr/local/lib/libopendkim.so) ===> Returning to build of milter-greylist-devel-4.6 ===> milter-greylist-devel-4.6 depends on shared library: libGeoIP.so - not found ===> Installing existing package /packages/All/GeoIP-1.6.9.txz Installing GeoIP-1.6.9... Extracting GeoIP-1.6.9: .......... done Message from GeoIP-1.6.9: GeoIP does not ship with the actual data files. You must download them yourself! Please run: # /usr/local/bin/geoipupdate.sh ===> milter-greylist-devel-4.6 depends on shared library: libGeoIP.so - found (/usr/local/lib/libGeoIP.so) ===> Returning to build of milter-greylist-devel-4.6 ===> milter-greylist-devel-4.6 depends on shared library: libspf2.so - not found ===> Installing existing package /packages/All/libspf2-1.2.10_2.txz Installing libspf2-1.2.10_2... Extracting libspf2-1.2.10_2: .......... done ===> milter-greylist-devel-4.6 depends on shared library: libspf2.so - found (/usr/local/lib/libspf2.so) ===> Returning to build of milter-greylist-devel-4.6 ===> milter-greylist-devel-4.6 depends on shared library: libmilter.so.6 - found (/usr/local/lib/libmilter.so.6) =========================================================================== =================================================== ===> Configuring for milter-greylist-devel-4.6 configure: loading site script /usr/ports/Templates/config.site checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for flex... flex checking lex output file root... lex.yy checking lex library... -lfl checking whether yytext is a pointer... yes checking for bison... no checking for byacc... byacc checking for a BSD-compatible install... /usr/bin/install -c checking for mkdep... mkdep checking for rm... rm checking for mv... mv checking for test... test checking for sed... (cached) /usr/bin/sed checking for true... true checking for touch... touch checking if compiler accepts -Wall... yes checking if compiler accepts -Werror... no checking if ld accepts -R... yes checking if ld accepts --rpath... yes checking how to run the C preprocessor... cpp checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for arpa/inet.h... (cached) yes checking for fcntl.h... (cached) yes checking for netinet/in.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for sys/socket.h... (cached) yes checking for sys/time.h... (cached) yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for unistd.h... (cached) yes checking for sys/param.h... (cached) yes checking for netdb.h... (cached) yes checking for getopt.h... (cached) yes checking for sys/cdefs.h... (cached) yes checking for arpa/nameser.h... (cached) yes checking for stdbool.h... (cached) yes checking sys/queue.h usability... yes checking sys/queue.h presence... yes checking for sys/queue.h... yes checking for pid_t... (cached) yes checking for size_t... (cached) yes checking whether time.h and sys/time.h may both be included... yes checking for res_state... yes checking if -lcurl needs -lcrypto to link and run... no checking for vfork.h... (cached) no checking for fork... (cached) yes checking for vfork... (cached) yes checking for working fork... yes checking for working vfork... (cached) yes checking for strftime... (cached) yes checking for working memcmp... yes checking for sys/select.h... (cached) yes checking for sys/socket.h... (cached) yes checking types of arguments for select... int,fd_set *,struct timeval * checking whether lstat correctly handles trailing slash... (cached) yes checking whether stat accepts an empty string... no checking for bzero... (cached) yes checking for gettimeofday... (cached) yes checking for malloc... yes checking for inet_ntoa... (cached) yes checking for strerror... (cached) yes checking for select... (cached) yes checking for socket... yes checking for initgroups... yes checking for strlcat... (cached) yes checking for vsyslog... yes checking for strcasestr... yes checking for getaddrinfo... (cached) yes checking for getnameinfo... (cached) yes checking for pthread_create in -lpthread... yes checking for SPF_server_new in -lspf2... yes checking for dkim_init in -lopendkim -lcrypto... yes checking for socket in -lsocket... no checking for socket in -lsocket -lnsl... no checking for inet_aton in -lresolv... no checking for inet_pton in -lnsl... no checking for res_ninit... yes checking for res_ndestroy... yes checking for res_nupdate... yes checking for getaddrinfo... (cached) yes checking for getnameinfo... (cached) yes checking if defines timeradd... yes checking if -D_REENTRANT is needed to use localtime_r and strtok_r... no checking if -D__EXTENSIONS__ is needed to use snprintf... no checking for smfi_register in -lmilter... yes checking for struct smfiDesc.xxfi_data... yes checking if -lpthread is needed after -lmilter... no checking if is outdated... yes checking if __RCSID can be used twice in the same source... yes checking whether wants -pthread... no checking whether you need -D_XOPEN_SOURCE to use libpthread... no checking if -D_OSF_SOURCE is needed for IPV6 support... no checking for struct sockaddr.sa_len... yes checking for struct sockaddr_in6.sin6_scope_id... (cached) yes checking if socklen_t is missing... no checking for broken rwlock in libpthread... no configure: creating ./config.status config.status: creating Makefile config.status: creating milter-greylist.spec config.status: creating config.h =========================================================================== =================================================== ===> Building for milter-greylist-devel-4.6 cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c milter-greylist.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c pending.c pending.c: In function 'pending_tarpitted': pending.c:507:9: warning: variable 'now' set but not used [-Wunused-but-set-variable] time_t now; ^ cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c sync.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c dnsrbl.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c list.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c macro.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c conf.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c store.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c dump.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c spf.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c acl.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c urlcheck.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c stat.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c clock.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c geoip.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c fd_pool.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c prop.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c ldapcheck.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c dkimcheck.c dkimcheck.c: In function 'dkimcheck_header': dkimcheck.c:172:43: warning: pointer targets in passing argument 2 of 'dkim_verify' differ in signedness [-Wpointer-sign] priv->priv_dkim = dkim_verify(dkim_ptr, priv->priv_queueid, ^ In file included from dkimcheck.c:51:0: /usr/local/include/opendkim/dkim.h:434:14: note: expected 'const unsigned char *' but argument is of type 'char *' extern DKIM *dkim_verify __P((DKIM_LIB *libhandle, const unsigned char *id, ^ dkimcheck.c:181:9: warning: pointer targets in assignment differ in signedness [-Wpointer-sign] header = header_lf2crlf(name, value, &len); ^ dkimcheck.c: In function 'dkimcheck_validate': dkimcheck.c:281:15: warning: comparison between pointer and integer return (stat == ad ? *(enum spf_status *)ad : MGSPF_PASS); ^ cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c p0f.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c spamd.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c mx.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c ratelimit.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c nsupdate.c cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c brokenmfapi.c === Call make sequential for objects sensitive to that (current make='/usr/bin/make' MAKEFLAGS=' .MAKE.LEVEL.ENV=MAKELEVEL ARCH=x86_64 CONFIGURE_MAX_CMD_LEN=262144 DFLYVERSION=400702 OPSYS=DragonFly OSREL=4.7 OSVERSION=9999999 _OSRELEASE=4.7-DPORTS'): /usr/bin/make -j 1 bld-seq byacc -p`echo conf_yacc.c|/usr/bin/sed 's/^\([^_]\{1,\}_\).*$/\1/'` conf_yacc.y mv y.tab.c conf_yacc.c flex -oconf_lex.c conf_lex.l byacc -p`echo dump_yacc.c|/usr/bin/sed 's/^\([^_]\{1,\}_\).*$/\1/'` dump_yacc.y mv y.tab.c dump_yacc.c flex -odump_lex.c dump_lex.l cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c conf_yacc.c In file included from conf_yacc.y:2337:0: conf_lex.c:2907:17: warning: 'yyunput' defined but not used [-Wunused-function] static void yyunput (int c, register char * yy_bp ) ^ conf_lex.c:2948:16: warning: 'input' defined but not used [-Wunused-function] static int input (void) ^ cc -pipe -I/usr/local/include -O2 -fno-strict-aliasing -Wall -I/usr/local/include -I/usr/local/include -DUSE_CURL -I/usr/local/include -DUSE_GEOIP -I/usr/local/include -I/usr/local/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/usr/local/etc/mail/greylist.conf\" -DDUMPFILE=\"/var/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -c dump_yacc.c In file included from dump_yacc.y:97:0: dump_lex.c:1275:17: warning: 'yyunput' defined but not used [-Wunused-function] static void yyunput (int c, register char * yy_bp ) ^ dump_lex.c:1316:16: warning: 'input' defined but not used [-Wunused-function] static int input (void) ^ test -f .objseq-built || touch .objseq-built sync || true === Linking milter-greylist: cc -o milter-greylist milter-greylist.o pending.o sync.o dnsrbl.o list.o macro.o conf.o store.o dump.o spf.o acl.o urlcheck.o stat.o clock.o geoip.o fd_pool.o prop.o ldapcheck.o dkimcheck.o p0f.o spamd.o mx.o ratelimit.o nsupdate.o brokenmfapi.o conf_yacc.o dump_yacc.o -L/usr/local/lib -Wl,-rpath,/usr/local/lib -L/usr/local/lib -Wl,--rpath=/usr/local/lib -L/usr/local/lib -Wl,--rpath=/usr/local/lib -L/usr/local/lib -Wl,--rpath=/usr/local/lib -L/usr/local/lib -Wl,--rpath=/usr/local/lib -L/usr/local/lib -Wl,--rpath=/usr/local/lib -lGeoIP -lcurl -lpthread -lpthread -lspf2 -lopendkim -lcrypto -lmilter =========================================================================== =================================================== =========================================================================== =================================================== ===> Staging for milter-greylist-devel-4.6 ===> Generating temporary packing list install -m 444 /wrkdirs/mail/milter-greylist-devel/milter-greylist-4.6/greylist.conf.5 /wrkdirs/mail/milter-greylist-devel/stage/usr/local/man/man5 install -m 444 /wrkdirs/mail/milter-greylist-devel/milter-greylist-4.6/milter-greylist.8 /wrkdirs/mail/milter-greylist-devel/stage/usr/local/man/man8 install -s -m 555 /wrkdirs/mail/milter-greylist-devel/milter-greylist-4.6/milter-greylist /wrkdirs/mail/milter-greylist-devel/stage/usr/local/libexec/ install -m 0644 /wrkdirs/mail/milter-greylist-devel/milter-greylist-4.6/greylist.conf /wrkdirs/mail/milter-greylist-devel/stage/usr/local/etc/mail/greylist.conf.sample install -m 0644 /wrkdirs/mail/milter-greylist-devel/milter-greylist-4.6/README /wrkdirs/mail/milter-greylist-devel/stage/usr/local/share/doc/milter-greylist install -m 0644 /wrkdirs/mail/milter-greylist-devel/milter-greylist-4.6/greylist.conf /wrkdirs/mail/milter-greylist-devel/stage/usr/local/share/examples/milter-greylist ====> Compressing man pages (compress-man) ===> Staging rc.d startup script(s) =========================================================================== =================================================== ===> Building package for milter-greylist-devel-4.6 file sizes/checksums [10]: . done packing files [10]: . done packing directories [1]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for milter-greylist-devel-4.6 build of mail/milter-greylist-devel ended at Tue Oct 4 21:36:49 PDT 2016 build time: 00:00:38