=> Building graphics/py-poppler build started at Mon Sep 18 17:14:36 PDT 2017 port directory: /usr/ports/graphics/py-poppler building for: DragonFly pkgbox64.dragonflybsd.org 4.9-DEVELOPMENT DragonFly v4.9.0.503.g33553-DEVELOPMENT #21: Fri Aug 4 16:51:32 PDT 2017 marino@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: romain@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/Release48-default/ref/../05//usr/ports/graphics/py-poppler/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400908 Jail OSVERSION: 400801 ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/Release48-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=py27-poppler-0.12.1_11 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/Release48-default/ref/.p/pool MASTERNAME=Release48-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ---End OPTIONS List--- --CONFIGURE_ARGS-- --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- MAKE=gmake PKG_CONFIG=pkgconf PYTHON="/usr/local/bin/python2.7" XDG_DATA_HOME=/wrkdirs/graphics/py-poppler XDG_CONFIG_HOME=/wrkdirs/graphics/py-poppler HOME=/wrkdirs/graphics/py-poppler TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/graphics/py-poppler XDG_CONFIG_HOME=/wrkdirs/graphics/py-poppler HOME=/wrkdirs/graphics/py-poppler TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- PYTHON_INCLUDEDIR=include/python2.7 PYTHON_LIBDIR=lib/python2.7 PYTHON_PLATFORM=dragonfly4 PYTHON_PYOEXTENSION=pyo PYTHON_SITELIBDIR=lib/python2.7/site-packages PYTHON_SUFFIX=27 PYTHON_VER=2.7 PYTHON_VERSION=python2.7 PYTHON2="" PYTHON3="@comment " GTK2_VERSION="2.10.0" GTK3_VERSION="3.0.0" OSREL=4.8 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/poppler" EXAMPLESDIR="share/examples/poppler" DATADIR="share/poppler" WWWDIR="www/poppler" ETCDIR="etc/poppler" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/poppler DOCSDIR=/usr/local/share/doc/poppler EXAMPLESDIR=/usr/local/share/examples/poppler WWWDIR=/usr/local/www/poppler ETCDIR=/usr/local/etc/poppler --End SUB_LIST-- ---Begin make.conf--- NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== =========================================================================== =================================================== ===> py27-poppler-0.12.1_11 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.10.1.txz Installing pkg-1.10.1... Extracting pkg-1.10.1: .......... done ===> py27-poppler-0.12.1_11 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of py27-poppler-0.12.1_11 =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by py27-poppler-0.12.1_11 for building =========================================================================== =================================================== ===> Fetching all distfiles required by py27-poppler-0.12.1_11 for building => SHA256 Checksum OK for pypoppler-0.12.1.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by py27-poppler-0.12.1_11 for building ===> Extracting for py27-poppler-0.12.1_11 => SHA256 Checksum OK for pypoppler-0.12.1.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for py27-poppler-0.12.1_11 ===> Applying ports patches for py27-poppler-0.12.1_11 =========================================================================== =================================================== ===> py27-poppler-0.12.1_11 depends on executable: gmake - not found ===> Installing existing package /packages/All/gmake-4.2.1_1.txz Installing gmake-4.2.1_1... `-- Installing indexinfo-0.2.6... `-- Extracting indexinfo-0.2.6: .... done `-- Installing gettext-runtime-0.19.8.1_1... `-- Extracting gettext-runtime-0.19.8.1_1: .......... done Extracting gmake-4.2.1_1: .......... done ===> py27-poppler-0.12.1_11 depends on executable: gmake - found ===> Returning to build of py27-poppler-0.12.1_11 ===> py27-poppler-0.12.1_11 depends on package: pkgconf>=1.3.0_1 - not found ===> Installing existing package /packages/All/pkgconf-1.3.7,1.txz Installing pkgconf-1.3.7,1... Extracting pkgconf-1.3.7,1: .......... done ===> py27-poppler-0.12.1_11 depends on package: pkgconf>=1.3.0_1 - found ===> Returning to build of py27-poppler-0.12.1_11 ===> py27-poppler-0.12.1_11 depends on file: /usr/local/bin/python2.7 - not found ===> Installing existing package /packages/All/python27-2.7.13_7.txz Installing python27-2.7.13_7... `-- Installing expat-2.2.1... `-- Extracting expat-2.2.1: .......... done `-- Installing libffi-3.2.1... `-- Extracting libffi-3.2.1: .......... done `-- Installing libressl-2.5.5... `-- Extracting libressl-2.5.5: .......... done `-- Installing ncurses-6.0_3... `-- Extracting ncurses-6.0_3: .......... done `-- Installing readline-7.0.3... `-- Extracting readline-7.0.3: .......... done Extracting python27-2.7.13_7: .......... done Message from ncurses-6.0_3: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from python27-2.7.13_7: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== ===> py27-poppler-0.12.1_11 depends on file: /usr/local/bin/python2.7 - found ===> Returning to build of py27-poppler-0.12.1_11 ===> py27-poppler-0.12.1_11 depends on executable: pygobject-codegen-2.0 - not found ===> Installing existing package /packages/All/py27-gobject-2.28.6_7.txz Installing py27-gobject-2.28.6_7... `-- Installing glib-2.50.2_4,1... | `-- Installing libiconv-1.14_10... | `-- Extracting libiconv-1.14_10: .......... done | `-- Installing pcre-8.40_1... | `-- Extracting pcre-8.40_1: .......... done | `-- Installing perl5-5.24.2... | `-- Extracting perl5-5.24.2: .......... done `-- Extracting glib-2.50.2_4,1: .......... done No schema files found: doing nothing. `-- Installing gobject-introspection-1.50.0,1... | `-- Installing python2-2_3... | `-- Extracting python2-2_3: ...... done `-- Extracting gobject-introspection-1.50.0,1: .......... done `-- Installing py27-cairo-1.10.0_2... | `-- Installing cairo-1.14.8_1,2... | | `-- Installing dri2proto-2.8... | | `-- Extracting dri2proto-2.8: .... done | | `-- Installing fontconfig-2.12.1,1... | | `-- Installing freetype2-2.8... | | `-- Extracting freetype2-2.8: .......... done | | `-- Extracting fontconfig-2.12.1,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | | `-- Installing glproto-1.4.17... | | `-- Extracting glproto-1.4.17: ...... done | | `-- Installing libX11-1.6.5,1... | | `-- Installing kbproto-1.0.7... | | `-- Extracting kbproto-1.0.7: .......... done | | `-- Installing libXau-1.0.8_3... | | | `-- Installing xproto-7.0.31... | | | `-- Extracting xproto-7.0.31: .......... done | | `-- Extracting libXau-1.0.8_3: .......... done | | `-- Installing libXdmcp-1.1.2... | | `-- Extracting libXdmcp-1.1.2: ......... done | | `-- Installing libxcb-1.12_2... | | | `-- Installing libpthread-stubs-0.4... | | | `-- Extracting libpthread-stubs-0.4: . done | | | `-- Installing libxml2-2.9.4... | | | `-- Extracting libxml2-2.9.4: .......... done | | `-- Extracting libxcb-1.12_2: .......... done | | `-- Extracting libX11-1.6.5,1: .......... done | | `-- Installing libXext-1.3.3_1,1... | | `-- Installing xextproto-7.3.0... | | `-- Extracting xextproto-7.3.0: .......... done | | `-- Extracting libXext-1.3.3_1,1: .......... done | | `-- Installing libXrender-0.9.10... | | `-- Installing renderproto-0.11.1... | | `-- Extracting renderproto-0.11.1: .... done | | `-- Extracting libXrender-0.9.10: .......... done | | `-- Installing mesa-libs-17.1.5... | | `-- Installing libXdamage-1.1.4_3... | | | `-- Installing damageproto-1.2.1... | | | `-- Extracting damageproto-1.2.1: .... done | | | `-- Installing libXfixes-5.0.3... | | | `-- Installing fixesproto-5.0... | | | `-- Extracting fixesproto-5.0: .... done | | | `-- Extracting libXfixes-5.0.3: .......... done | | `-- Extracting libXdamage-1.1.4_3: ...... done | | `-- Installing libXxf86vm-1.1.4_1... | | | `-- Installing xf86vidmodeproto-2.3.1... | | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | | `-- Installing libdrm-2.4.82,1... | | | `-- Installing libpciaccess-0.13.5... | | | `-- Installing pciids-20170727... | | | `-- Extracting pciids-20170727: ..... done | | | `-- Extracting libpciaccess-0.13.5: ...... done | | `-- Extracting libdrm-2.4.82,1: .......... done | | `-- Installing libelf-0.8.13_2... | | `-- Extracting libelf-0.8.13_2: .......... done | | `-- Installing libxshmfence-1.2_2... | | `-- Extracting libxshmfence-1.2_2: ......... done | | `-- Extracting mesa-libs-17.1.5: .......... done | | `-- Installing pixman-0.34.0... | | `-- Extracting pixman-0.34.0: .......... done | | `-- Installing png-1.6.31... | | `-- Extracting png-1.6.31: .......... done | | `-- Installing xcb-util-renderutil-0.3.9_1... | | `-- Installing xcb-util-0.4.0_2,1... | | `-- Extracting xcb-util-0.4.0_2,1: .......... done | | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done | `-- Extracting cairo-1.14.8_1,2: .......... done `-- Extracting py27-cairo-1.10.0_2: ...... done Extracting py27-gobject-2.28.6_7: .......... done Message from perl5-5.24.2: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Message from freetype2-2.8: The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/ft2-toc.html, if documentation was installed). ===> py27-poppler-0.12.1_11 depends on executable: pygobject-codegen-2.0 - found ===> Returning to build of py27-poppler-0.12.1_11 ===> py27-poppler-0.12.1_11 depends on file: /usr/local/libdata/pkgconfig/pygtk-2.0.pc - not found ===> Installing existing package /packages/All/py27-gtk2-2.24.0_4.txz Installing py27-gtk2-2.24.0_4... `-- Installing atk-2.24.0... `-- Extracting atk-2.24.0: .......... done `-- Installing gtk2-2.24.31... | `-- Installing cups-2.2.3... | | `-- Installing avahi-app-0.6.31_5... | | `-- Installing dbus-glib-0.108... | | | `-- Installing dbus-1.10.16_1... | | | `-- Installing libICE-1.0.9_1,1... | | | `-- Extracting libICE-1.0.9_1,1: .......... done | | | `-- Installing libSM-1.2.2_3,1... | | | `-- Extracting libSM-1.2.2_3,1: .......... done ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | | | `-- Extracting dbus-1.10.16_1: ......... done | | `-- Extracting dbus-glib-0.108: .......... done | | `-- Installing gdbm-1.13_1... | | `-- Extracting gdbm-1.13_1: .......... done | | `-- Installing gnome_subr-1.0... | | `-- Extracting gnome_subr-1.0: . done | | `-- Installing libdaemon-0.14_1... | | `-- Extracting libdaemon-0.14_1: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. | | `-- Extracting avahi-app-0.6.31_5: .......... done | | `-- Installing gnutls-3.5.13... | | `-- Installing ca_root_nss-3.32... | | `-- Extracting ca_root_nss-3.32: ........ done | | `-- Installing gmp-6.1.2... | | `-- Extracting gmp-6.1.2: .......... done | | `-- Installing libidn2-2.0.3... | | | `-- Installing libunistring-0.9.7... | | | `-- Extracting libunistring-0.9.7: .......... done | | `-- Extracting libidn2-2.0.3: .......... done | | `-- Installing libtasn1-4.12... | | `-- Extracting libtasn1-4.12: .......... done | | `-- Installing nettle-3.3... | | `-- Extracting nettle-3.3: .......... done | | `-- Installing p11-kit-0.23.7... | | `-- Extracting p11-kit-0.23.7: .......... done | | `-- Installing trousers-0.3.14_1... | | | `-- Installing tpm-emulator-0.7.4_2... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. | | | `-- Extracting tpm-emulator-0.7.4_2: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting trousers-0.3.14_1: .......... done | | `-- Extracting gnutls-3.5.13: .......... done | | `-- Installing libpaper-1.1.24.4... | | `-- Extracting libpaper-1.1.24.4: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. | `-- Extracting cups-2.2.3: .......... done | `-- Installing gdk-pixbuf2-2.36.6... | | `-- Installing jasper-1.900.1_17... | | `-- Installing jpeg-turbo-1.5.2... | | `-- Extracting jpeg-turbo-1.5.2: .......... done | | `-- Extracting jasper-1.900.1_17: .......... done | | `-- Installing libXi-1.7.9,1... | | `-- Installing inputproto-2.3.2... | | `-- Extracting inputproto-2.3.2: ........ done | | `-- Extracting libXi-1.7.9,1: .......... done | | `-- Installing libXt-1.1.5,1... | | `-- Extracting libXt-1.1.5,1: .......... done | | `-- Installing tiff-4.0.8... | | `-- Installing jbigkit-2.1_1... | | `-- Extracting jbigkit-2.1_1: .......... done | | `-- Extracting tiff-4.0.8: .......... done | `-- Extracting gdk-pixbuf2-2.36.6: .......... done | `-- Installing gtk-update-icon-cache-2.24.29... | | `-- Installing hicolor-icon-theme-0.15... | | `-- Extracting hicolor-icon-theme-0.15: . done | | `-- Installing libXcomposite-0.4.4_3,1... | | `-- Installing compositeproto-0.4.2... | | `-- Extracting compositeproto-0.4.2: .... done | | `-- Extracting libXcomposite-0.4.4_3,1: .......... done | | `-- Installing libXcursor-1.1.14_3... | | `-- Extracting libXcursor-1.1.14_3: .......... done | | `-- Installing libXinerama-1.1.3_3,1... | | `-- Installing xineramaproto-1.2.1... | | `-- Extracting xineramaproto-1.2.1: .. done | | `-- Extracting libXinerama-1.1.3_3,1: .......... done | | `-- Installing libXrandr-1.5.1... | | `-- Installing randrproto-1.5.0... | | `-- Extracting randrproto-1.5.0: .... done | | `-- Extracting libXrandr-1.5.1: .......... done | | `-- Installing pango-1.40.6... | | `-- Installing encodings-1.0.4_3,1... | | | `-- Installing font-util-1.3.1... | | | `-- Extracting font-util-1.3.1: .......... done | | `-- Extracting encodings-1.0.4_3,1: .......... done | | `-- Installing harfbuzz-1.4.7... | | | `-- Installing graphite2-1.3.10... | | | `-- Extracting graphite2-1.3.10: .......... done | | `-- Extracting harfbuzz-1.4.7: .......... done | | `-- Installing libXft-2.3.2_1... | | `-- Extracting libXft-2.3.2_1: ......... done | | `-- Installing xorg-fonts-truetype-7.7_1... | | | `-- Installing dejavu-2.37... | | | `-- Installing mkfontdir-1.0.7... | | | | `-- Installing mkfontscale-1.1.2... | | | | `-- Installing libfontenc-1.1.3_1... | | | | `-- Extracting libfontenc-1.1.3_1: ......... done | | | | `-- Extracting mkfontscale-1.1.2: .. done | | | `-- Extracting mkfontdir-1.0.7: .. done | | | `-- Extracting dejavu-2.37: .......... done | | | `-- Installing font-bh-ttf-1.0.3_3... | | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | | `-- Installing font-misc-ethiopic-1.0.3_3... | | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | | `-- Installing font-misc-meltho-1.0.3_3... | | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done | | `-- Extracting pango-1.40.6: .......... done | | `-- Installing shared-mime-info-1.8... | | `-- Extracting shared-mime-info-1.8: .......... done | `-- Extracting gtk-update-icon-cache-2.24.29: .... done `-- Extracting gtk2-2.24.31: .......... done `-- Installing libglade2-2.6.4_8... | `-- Installing xmlcatmgr-2.2_2... | `-- Extracting xmlcatmgr-2.2_2: ......... done + Creating /usr/local/share/sgml/catalog + Registering CATALOG catalog.ports (SGML) + Creating /usr/local/share/sgml/catalog.ports + Creating /usr/local/share/xml/catalog + Registering nextCatalog catalog.ports (XML) + Creating /usr/local/share/xml/catalog.ports `-- Extracting libglade2-2.6.4_8: .......... done Extracting py27-gtk2-2.24.0_4: .......... done Message from ca_root_nss-3.32: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.14_1: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Message from dejavu-2.37: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from xmlcatmgr-2.2_2: The following catalogs are installed: 1) /usr/local/share/sgml/catalog The top level catalog for SGML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 2) /usr/local/share/sgml/catalog.ports This catalog is for handling SGML stuff installed under /usr/local/share/sgml. It is changed by ports/packages. 3) /usr/local/share/xml/catalog The top level catalog for XML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 4) /usr/local/share/xml/catalog.ports This catalog is for handling XML stuff installed under /usr/local/share/xml. It is changed by ports/packages. ===> py27-poppler-0.12.1_11 depends on file: /usr/local/libdata/pkgconfig/pygtk-2.0.pc - found ===> Returning to build of py27-poppler-0.12.1_11 =========================================================================== =================================================== ===> py27-poppler-0.12.1_11 depends on shared library: libpoppler-glib.so - not found ===> Installing existing package /packages/All/poppler-glib-0.57.0.txz Installing poppler-glib-0.57.0... `-- Installing lcms2-2.8... `-- Extracting lcms2-2.8: .......... done `-- Installing nspr-4.16... `-- Extracting nspr-4.16: .......... done `-- Installing nss-3.32.1... | `-- Installing sqlite3-3.20.1... | `-- Extracting sqlite3-3.20.1: .......... done `-- Extracting nss-3.32.1: .......... done `-- Installing poppler-0.57.0... | `-- Installing openjpeg-2.2.0... | `-- Extracting openjpeg-2.2.0: .......... done | `-- Installing poppler-data-0.4.7... | `-- Extracting poppler-data-0.4.7: .......... done `-- Extracting poppler-0.57.0: .......... done Extracting poppler-glib-0.57.0: .......... done ===> py27-poppler-0.12.1_11 depends on shared library: libpoppler-glib.so - found (/usr/local/lib/libpoppler-glib.so) ===> Returning to build of py27-poppler-0.12.1_11 ===> py27-poppler-0.12.1_11 depends on shared library: libatk-1.0.so - found (/usr/local/lib/libatk-1.0.so) ===> py27-poppler-0.12.1_11 depends on shared library: libglib-2.0.so - found (/usr/local/lib/libglib-2.0.so) ===> py27-poppler-0.12.1_11 depends on shared library: libintl.so - found (/usr/local/lib/libintl.so) ===> py27-poppler-0.12.1_11 depends on shared library: libgtk-x11-2.0.so - found (/usr/local/lib/libgtk-x11-2.0.so) ===> py27-poppler-0.12.1_11 depends on shared library: libglade-2.0.so - found (/usr/local/lib/libglade-2.0.so) ===> py27-poppler-0.12.1_11 depends on shared library: libxml2.so - found (/usr/local/lib/libxml2.so) ===> py27-poppler-0.12.1_11 depends on shared library: libpango-1.0.so - found (/usr/local/lib/libpango-1.0.so) =========================================================================== =================================================== ===> Configuring for py27-poppler-0.12.1_11 configure: loading site script /usr/ports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether gmake sets $(MAKE)... yes checking build system type... x86_64-portbld-dragonfly4.8 checking host system type... x86_64-portbld-dragonfly4.8 checking for some Win32 platform... no checking for native Win32... no checking for style of include used by gmake... GNU checking for gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... gcc3 checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for fgrep... (cached) /usr/bin/fgrep checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... (cached) 262144 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... no checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from cc object... ok checking how to run the C preprocessor... cpp checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for dlfcn.h... (cached) yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly4.8 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating ./config.lt config.lt: creating libtool checking whether cc understands -c and -o together... yes checking whether /usr/local/bin/python2.7 version >= 2.2... yes checking for /usr/local/bin/python2.7 version... 2.7 checking for /usr/local/bin/python2.7 platform... dragonfly4 checking for /usr/local/bin/python2.7 script directory... ${prefix}/lib/python2.7/site-packages checking for /usr/local/bin/python2.7 extension module directory... ${exec_prefix}/lib/python2.7/site-packages checking for headers required to compile python extensions... found checking pkg-config is at least version 0.9.0... yes checking for PYPOPPLER... yes checking for PYCAIRO... yes checking for pygtk codegen... yes checking whether cc understands -Wall... yes checking whether cc understands -std=c9x... yes configure: creating ./config.status config.status: creating Makefile config.status: creating demo/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands =========================================================================== =================================================== ===> Building for py27-poppler-0.12.1_11 gmake[1]: Entering directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1' gmake all-recursive gmake[2]: Entering directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1' Making all in demo gmake[3]: Entering directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1/demo' gmake[3]: Nothing to be done for 'all'. gmake[3]: Leaving directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1/demo' gmake[3]: Entering directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1' /bin/sh ./libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I/usr/local/include/python2.7 -I/usr/local/include/pygtk-2.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/lib/libffi-3.2.1/include -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -I/usr/local/include/poppler/glib -pthread -D_THREAD_SAFE -D_THREAD_SAFE -I/usr/local/include/poppler -I/usr/local/include/pycairo -I/usr/local/include/cairo -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -D_THREAD_SAFE -pipe -O2 -fno-strict-aliasing -Wall -std=c9x -MT poppler_la-popplermodule.lo -MD -MP -MF .deps/poppler_la-popplermodule.Tpo -c -o poppler_la-popplermodule.lo `test -f 'popplermodule.c' || echo './'`popplermodule.c (cd .\ && /usr/local/bin/python2.7 /usr/local/share/pygobject/2.0/codegen/codegen.py \ --override poppler.override \ --register /usr/local/share/pygtk/2.0/defs/gdk-types.defs \ --register /usr/local/share/pygtk/2.0/defs/pango-types.defs \ --register /usr/local/share/pygtk/2.0/defs/gtk-types.defs \ --prefix py_poppler poppler.defs) > gen-poppler.c \ && cp gen-poppler.c poppler.c \ && rm -f gen-poppler.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I/usr/local/include/python2.7 -I/usr/local/include/pygtk-2.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/lib/libffi-3.2.1/include -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -I/usr/local/include/poppler/glib -pthread -D_THREAD_SAFE -D_THREAD_SAFE -I/usr/local/include/poppler -I/usr/local/include/pycairo -I/usr/local/include/cairo -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -D_THREAD_SAFE -pipe -O2 -fno-strict-aliasing -Wall -std=c9x -MT poppler_la-popplermodule.lo -MD -MP -MF .deps/poppler_la-popplermodule.Tpo -c popplermodule.c -fPIC -DPIC -o .libs/poppler_la-popplermodule.o mv -f .deps/poppler_la-popplermodule.Tpo .deps/poppler_la-popplermodule.Plo Warning: of-object argument unsupported (define-function poppler_page_add_annot (c-name "poppler_page_add_annot") (return-type "none") (parameters '("PopplerAnnot*" "annot") '("GList*" "list") ) ) Could not write method PopplerAnnotMarkup.get_date: No ArgType for GDate* Could not write method PopplerPage.get_text_layout: No ArgType for PopplerRectangle** Could not write method PopplerAttachment.save_to_callback: No ArgType for PopplerAttachmentSaveFunc Warning: generating old-style constructor for:poppler_font_info_new Could not write function date_parse: No ArgType for time_t* Could not write function error_quark: No ArgType for GQuark Could not write function poppler_page_free_link_mapping: No ArgType for GList* Could not write function poppler_page_free_image_mapping: No ArgType for GList* Could not write function poppler_page_free_form_field_mapping: No ArgType for GList* Could not write function poppler_page_free_annot_mapping: No ArgType for GList* Could not write function poppler_page_add_annot: No ArgType for GList* Warning: Constructor for PopplerFontInfo needs to be updated to new API See http://live.gnome.org/PyGTK_2fWhatsNew28#update-constructors ***INFO*** The coverage of global functions is 36.36% (4/11) ***INFO*** The coverage of methods is 97.17% (103/106) ***INFO*** There are no declared virtual proxies. ***INFO*** There are no declared virtual accessors. ***INFO*** There are no declared interface proxies. /bin/sh ./libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I/usr/local/include/python2.7 -I/usr/local/include/pygtk-2.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/lib/libffi-3.2.1/include -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -I/usr/local/include/poppler/glib -pthread -D_THREAD_SAFE -D_THREAD_SAFE -I/usr/local/include/poppler -I/usr/local/include/pycairo -I/usr/local/include/cairo -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -D_THREAD_SAFE -pipe -O2 -fno-strict-aliasing -Wall -std=c9x -MT poppler_la-poppler.lo -MD -MP -MF .deps/poppler_la-poppler.Tpo -c -o poppler_la-poppler.lo `test -f 'poppler.c' || echo './'`poppler.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I/usr/local/include/python2.7 -I/usr/local/include/pygtk-2.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/lib/libffi-3.2.1/include -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -I/usr/local/include/poppler/glib -pthread -D_THREAD_SAFE -D_THREAD_SAFE -I/usr/local/include/poppler -I/usr/local/include/pycairo -I/usr/local/include/cairo -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -D_THREAD_SAFE -pipe -O2 -fno-strict-aliasing -Wall -std=c9x -MT poppler_la-poppler.lo -MD -MP -MF .deps/poppler_la-poppler.Tpo -c poppler.c -fPIC -DPIC -o .libs/poppler_la-poppler.o mv -f .deps/poppler_la-poppler.Tpo .deps/poppler_la-poppler.Plo /bin/sh ./libtool --tag=CC --mode=link cc -I/usr/local/include/pygtk-2.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/lib/libffi-3.2.1/include -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -I/usr/local/include/poppler/glib -pthread -D_THREAD_SAFE -D_THREAD_SAFE -I/usr/local/include/poppler -I/usr/local/include/pycairo -I/usr/local/include/cairo -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -D_THREAD_SAFE -pipe -O2 -fno-strict-aliasing -Wall -std=c9x -module -avoid-version -export-symbols-regex initpoppler -o poppler.la -rpath /usr/local/lib/python2.7/site-packages poppler_la-popplermodule.lo poppler_la-poppler.lo -L/usr/local/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lpangoft2-1.0 -lpango-1.0 -lfontconfig -lfreetype -latk-1.0 -lpoppler-glib -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lintl -lcairo -lpthread libtool: link: /usr/bin/nm -B .libs/poppler_la-popplermodule.o .libs/poppler_la-poppler.o | sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /usr/bin/sed 's/.* //' | sort | uniq > .libs/poppler.exp libtool: link: /usr/bin/egrep -e "initpoppler" ".libs/poppler.exp" > ".libs/poppler.expT" libtool: link: mv -f ".libs/poppler.expT" ".libs/poppler.exp" libtool: link: echo "{ global:" > .libs/poppler.so-ver libtool: link: sed -e "s|$|;|" < .libs/poppler.exp >> .libs/poppler.so-ver libtool: link: echo "local: *; };" >> .libs/poppler.so-ver libtool: link: cc -shared .libs/poppler_la-popplermodule.o .libs/poppler_la-poppler.o -L/usr/local/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lpangoft2-1.0 -lpango-1.0 -lfontconfig -lfreetype -latk-1.0 -lpoppler-glib -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lintl -lcairo -lpthread -pthread -pthread -Wl,-soname -Wl,poppler.so -Wl,-version-script -Wl,.libs/poppler.so-ver -o .libs/poppler.so libtool: link: ( cd ".libs" && rm -f "poppler.la" && ln -s "../poppler.la" "poppler.la" ) gmake[3]: Leaving directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1' gmake[2]: Leaving directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1' gmake[1]: Leaving directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1' =========================================================================== =================================================== ===> py27-poppler-0.12.1_11 depends on file: /usr/local/bin/python2.7 - found ===> py27-poppler-0.12.1_11 depends on executable: pygobject-codegen-2.0 - found ===> py27-poppler-0.12.1_11 depends on file: /usr/local/libdata/pkgconfig/pygtk-2.0.pc - found =========================================================================== =================================================== ===> Staging for py27-poppler-0.12.1_11 ===> Generating temporary packing list gmake[1]: Entering directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1' Making install in demo gmake[2]: Entering directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1/demo' gmake[3]: Entering directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1/demo' gmake[3]: Nothing to be done for 'install-exec-am'. gmake[3]: Nothing to be done for 'install-data-am'. gmake[3]: Leaving directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1/demo' gmake[2]: Leaving directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1/demo' gmake[2]: Entering directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1' gmake[3]: Entering directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1' test -z "/usr/local/lib/python2.7/site-packages" || /bin/mkdir -p "/wrkdirs/graphics/py-poppler/stage/usr/local/lib/python2.7/site-packages" /bin/sh ./libtool --mode=install /usr/bin/install -c poppler.la '/wrkdirs/graphics/py-poppler/stage/usr/local/lib/python2.7/site-packages' libtool: install: /usr/bin/install -c .libs/poppler.so /wrkdirs/graphics/py-poppler/stage/usr/local/lib/python2.7/site-packages/poppler.so libtool: install: /usr/bin/install -c .libs/poppler.lai /wrkdirs/graphics/py-poppler/stage/usr/local/lib/python2.7/site-packages/poppler.la libtool: install: warning: remember to run `libtool --finish /usr/local/lib/python2.7/site-packages' gmake[3]: Nothing to be done for 'install-data-am'. gmake[3]: Leaving directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1' gmake[2]: Leaving directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1' gmake[1]: Leaving directory '/wrkdirs/graphics/py-poppler/pypoppler-0.12.1' ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for py27-poppler-0.12.1_11 file sizes/checksums [1]: . done packing files [1]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for py27-poppler-0.12.1_11 build of graphics/py-poppler ended at Mon Sep 18 17:16:06 PDT 2017 build time: 00:01:30