=> Building security/p5-GSSAPI build started at Sun Mar 12 10:50:32 PDT 2017 port directory: /usr/ports/security/p5-GSSAPI building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.1380.gb4315f-DEVELOPMENT #0: Fri Mar 3 17:20:21 PST 2017 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: perl@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/Release48-default/ref/../08//usr/ports/security/p5-GSSAPI/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400713 Jail OSVERSION: 400713 ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/Release48-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=p5-GSSAPI-0.28_1 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/Release48-default/ref/.p/pool MASTERNAME=Release48-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ===> The following configuration options are available for p5-GSSAPI-0.28_1: ====> GSSAPI Security API support: you have to select exactly one of them GSSAPI_HEIMDAL=off: GSSAPI support via security/heimdal GSSAPI_MIT=on: GSSAPI support via security/krb5 ===> Use 'make config' to modify these settings ---End OPTIONS List--- --CONFIGURE_ARGS-- INSTALLDIRS="site" CC="cc" CCFLAGS="-pipe -O2 -fno-strict-aliasing" PREFIX="/usr/local" INSTALLPRIVLIB="/usr/local/lib" INSTALLARCHLIB="/usr/local/lib" --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- ac_cv_path_PERL=/usr/local/bin/perl ac_cv_path_PERL_PATH=/usr/local/bin/perl XDG_DATA_HOME=/wrkdirs/security/p5-GSSAPI XDG_CONFIG_HOME=/wrkdirs/security/p5-GSSAPI HOME=/wrkdirs/security/p5-GSSAPI TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 PERL_EXTUTILS_AUTOINSTALL="--skipdeps" PERL_MM_USE_DEFAULT="YES" --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/security/p5-GSSAPI XDG_CONFIG_HOME=/wrkdirs/security/p5-GSSAPI HOME=/wrkdirs/security/p5-GSSAPI TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS=" -Wl,-rpath,/usr/local/lib:/usr/lib" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PERL_VERSION=5.24.1 PERL_VER=5.24 PERL5_MAN1=lib/perl5/site_perl/man/man1 PERL5_MAN3=lib/perl5/site_perl/man/man3 SITE_PERL=lib/perl5/site_perl SITE_ARCH=lib/perl5/site_perl/mach/5.24 PROFILE="@comment " DOCSDIR="share/doc/GSSAPI" EXAMPLESDIR="share/examples/GSSAPI" DATADIR="share/GSSAPI" WWWDIR="www/GSSAPI" ETCDIR="etc/GSSAPI" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/GSSAPI DOCSDIR=/usr/local/share/doc/GSSAPI EXAMPLESDIR=/usr/local/share/examples/GSSAPI WWWDIR=/usr/local/www/GSSAPI ETCDIR=/usr/local/etc/GSSAPI --End SUB_LIST-- ---Begin make.conf--- NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== =========================================================================== =================================================== ===> p5-GSSAPI-0.28_1 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.9.4_1.txz Installing pkg-1.9.4_1... Extracting pkg-1.9.4_1: .......... done ===> p5-GSSAPI-0.28_1 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of p5-GSSAPI-0.28_1 =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by p5-GSSAPI-0.28_1 for building =========================================================================== =================================================== ===> Fetching all distfiles required by p5-GSSAPI-0.28_1 for building => SHA256 Checksum OK for GSSAPI-0.28.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by p5-GSSAPI-0.28_1 for building ===> Extracting for p5-GSSAPI-0.28_1 ===> Fetching all distfiles required by p5-GSSAPI-0.28_1 for building => SHA256 Checksum OK for GSSAPI-0.28.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for p5-GSSAPI-0.28_1 ===> Applying ports patches for p5-GSSAPI-0.28_1 =========================================================================== =================================================== ===> p5-GSSAPI-0.28_1 depends on file: /usr/local/lib/libkrb5support.so - not found ===> Installing existing package /packages/All/krb5-1.14.4_1.txz Installing krb5-1.14.4_1... `-- Installing libressl-2.4.5... `-- Extracting libressl-2.4.5: .......... done `-- Installing pkgconf-1.2.1_1... `-- Extracting pkgconf-1.2.1_1: .......... done `-- Installing gettext-runtime-0.19.8.1_1... | `-- Installing indexinfo-0.2.6... | `-- Extracting indexinfo-0.2.6: .... done `-- Extracting gettext-runtime-0.19.8.1_1: .......... done Extracting krb5-1.14.4_1: .......... done ===> p5-GSSAPI-0.28_1 depends on file: /usr/local/lib/libkrb5support.so - found ===> Returning to build of p5-GSSAPI-0.28_1 ===> p5-GSSAPI-0.28_1 depends on package: perl5>=5.24<5.25 - not found ===> Installing existing package /packages/All/perl5-5.24.1.txz Installing perl5-5.24.1... Extracting perl5-5.24.1: .......... done Message from perl5-5.24.1: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. ===> p5-GSSAPI-0.28_1 depends on package: perl5>=5.24<5.25 - found ===> Returning to build of p5-GSSAPI-0.28_1 =========================================================================== =================================================== =========================================================================== =================================================== ===> Configuring for p5-GSSAPI-0.28_1 Welcome to GSSAPI.pm setup! (./Makefile.PL Version 0.03) run "perl Makefile.PL --help" to see further installation options ---------------------------------------------------------- Searching krb5-config command... using krb5-config command '/usr/local/bin/krb5-config'. ---------------------------------------------------------- using GSSAPI implementation Kerberos 5 release 1.14.4 ---------------------------------------------------------- Adding from your Perlinstallation ($Config{lddlflags}) to LDDLFLAGS -shared -L/usr/local/lib/perl5/5.24/mach/CORE -lperl -L/usr/local/lib -fstack-protector-strong ---------------------------------------------------------- Bypassing to LDDLFLAGS -shared -L/usr/local/lib/perl5/5.24/mach/CORE -lperl -L/usr/local/lib -fstack-protector-strong -Wl,-rpath,/usr/local/lib:/usr/lib -Wl,-rpath,/usr/local/lib ---------------------------------------------------------- Using LIBS -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err ---------------------------------------------------------- Using INC includeconfiguration -I/usr/local/include ---------------------------------------------------------- Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for GSSAPI Writing MYMETA.yml and MYMETA.json =========================================================================== =================================================== ===> Building for p5-GSSAPI-0.28_1 --- blib/lib/.exists --- --- blib/arch/.exists --- --- blib/lib/auto/GSSAPI/.exists --- --- blib/arch/auto/GSSAPI/.exists --- --- blib/bin/.exists --- --- blib/script/.exists --- --- blib/man1/.exists --- --- blib/man3/.exists --- --- subdirs --- --- GSSAPI.c --- "/usr/local/bin/perl5.24.1" "/usr/local/lib/perl5/5.24/ExtUtils/xsubpp" -typemap "/usr/local/lib/perl5/5.24/ExtUtils/typemap" -typemap "typemap" GSSAPI.xs > GSSAPI.xsc && mv GSSAPI.xsc GSSAPI.c --- GSSAPI.bs --- Running Mkbootstrap for GSSAPI () chmod 644 "GSSAPI.bs" --- pm_to_blib --- cp GSSAPI/Status.pm blib/lib/GSSAPI/Status.pm cp GSSAPI/OID.pm blib/lib/GSSAPI/OID.pm cp GSSAPI.pm blib/lib/GSSAPI.pm cp GSSAPI/OID/Set.pm blib/lib/GSSAPI/OID/Set.pm --- blibdirs --- --- config --- --- GSSAPI.o --- cc -c -I/usr/local/include -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -DVERSION=\"0.28\" -DXS_VERSION=\"0.28\" -DPIC -fPIC "-I/usr/local/lib/perl5/5.24/mach/CORE" GSSAPI.c --- blib/arch/auto/GSSAPI/GSSAPI.so --- rm -f blib/arch/auto/GSSAPI/GSSAPI.so LD_RUN_PATH="/usr/local/lib" cc -shared -L/usr/local/lib/perl5/5.24/mach/CORE -lperl -L/usr/local/lib -fstack-protector-strong -Wl,-rpath,/usr/local/lib:/usr/lib -Wl,-rpath,/usr/local/lib GSSAPI.o -o blib/arch/auto/GSSAPI/GSSAPI.so -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err chmod 755 blib/arch/auto/GSSAPI/GSSAPI.so "/usr/local/bin/perl5.24.1" -MExtUtils::Command::MM -e 'cp_nonempty' -- GSSAPI.bs blib/arch/auto/GSSAPI/GSSAPI.bs 644 --- dynamic --- --- linkext --- --- pure_all --- --- manifypods --- Manifying 4 pod documents --- all --- =========================================================================== =================================================== ===> p5-GSSAPI-0.28_1 depends on file: /usr/local/lib/libkrb5support.so - found ===> p5-GSSAPI-0.28_1 depends on package: perl5>=5.24<5.25 - found =========================================================================== =================================================== ===> Staging for p5-GSSAPI-0.28_1 ===> Generating temporary packing list Running Mkbootstrap for GSSAPI () chmod 644 "GSSAPI.bs" Manifying 4 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /wrkdirs/security/p5-GSSAPI/stage/usr/local/lib/perl5/site_perl/mach/5.24/auto/GSSAPI/GSSAPI.so Installing /wrkdirs/security/p5-GSSAPI/stage/usr/local/lib/perl5/site_perl/mach/5.24/GSSAPI.pm Installing /wrkdirs/security/p5-GSSAPI/stage/usr/local/lib/perl5/site_perl/mach/5.24/GSSAPI/Status.pm Installing /wrkdirs/security/p5-GSSAPI/stage/usr/local/lib/perl5/site_perl/mach/5.24/GSSAPI/OID.pm Installing /wrkdirs/security/p5-GSSAPI/stage/usr/local/lib/perl5/site_perl/mach/5.24/GSSAPI/OID/Set.pm Installing /wrkdirs/security/p5-GSSAPI/stage/usr/local/lib/perl5/site_perl/man/man3/GSSAPI::Status.3 Installing /wrkdirs/security/p5-GSSAPI/stage/usr/local/lib/perl5/site_perl/man/man3/GSSAPI::OID::Set.3 Installing /wrkdirs/security/p5-GSSAPI/stage/usr/local/lib/perl5/site_perl/man/man3/GSSAPI::OID.3 Installing /wrkdirs/security/p5-GSSAPI/stage/usr/local/lib/perl5/site_perl/man/man3/GSSAPI.3 ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for p5-GSSAPI-0.28_1 file sizes/checksums [10]: . done packing files [10]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for p5-GSSAPI-0.28_1 build of security/p5-GSSAPI ended at Sun Mar 12 10:51:16 PDT 2017 build time: 00:00:43