=> Building audio/libgpod-sharp build started at Mon Mar 13 00:39:32 PDT 2017 port directory: /usr/ports/audio/libgpod-sharp building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.1380.gb4315f-DEVELOPMENT #0: Fri Mar 3 17:20:21 PST 2017 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: mono@FreeBSD.org ident warning: no id keywords in /build/boomdata/data/.m/Release48-default/ref/../05//usr/ports/audio/libgpod-sharp/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400713 Jail OSVERSION: 400713 ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/Release48-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=libgpod-sharp-0.8.3_5 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/Release48-default/ref/.p/pool MASTERNAME=Release48-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ---End OPTIONS List--- --CONFIGURE_ARGS-- --disable-udev --without-hal --with-html-dir="/usr/local/share/doc" --without-libimobiledevice --with-mono --without-python --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- MAKE=gmake PKG_CONFIG=pkgconf XDG_DATA_HOME=/wrkdirs/audio/libgpod-sharp XDG_CONFIG_HOME=/wrkdirs/audio/libgpod-sharp HOME=/wrkdirs/audio/libgpod-sharp TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 CMAKE_PREFIX_PATH="/usr/local" CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/audio/libgpod-sharp XDG_CONFIG_HOME=/wrkdirs/audio/libgpod-sharp HOME=/wrkdirs/audio/libgpod-sharp TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -std=gnu89" CPP="cpp" CPPFLAGS="-isystem /usr/local/include" LDFLAGS="" LIBS="-L/usr/local/lib" CXX="c++" CXXFLAGS=" -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -isystem /usr/local/include" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- DOCS="@comment " NO_DOCS="" IMOBILE="@comment " NO_IMOBILE="" MONO="" NO_MONO="@comment " PYTHON="@comment " NO_PYTHON="" GTK2_VERSION="2.10.0" GTK3_VERSION="3.0.0" OSREL=4.7 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="@comment " PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/libgpod" EXAMPLESDIR="share/examples/libgpod" DATADIR="share/libgpod" WWWDIR="www/libgpod" ETCDIR="etc/libgpod" --End PLIST_SUB-- --SUB_LIST-- DOCS="@comment " NO_DOCS="" IMOBILE="@comment " NO_IMOBILE="" MONO="" NO_MONO="@comment " PYTHON="@comment " NO_PYTHON="" PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/libgpod DOCSDIR=/usr/local/share/doc/libgpod EXAMPLESDIR=/usr/local/share/examples/libgpod WWWDIR=/usr/local/www/libgpod ETCDIR=/usr/local/etc/libgpod --End SUB_LIST-- ---Begin make.conf--- NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== ===> License LGPL20 accepted by the user =========================================================================== =================================================== ===> libgpod-sharp-0.8.3_5 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.9.4_1.txz Installing pkg-1.9.4_1... Extracting pkg-1.9.4_1: .......... done ===> libgpod-sharp-0.8.3_5 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of libgpod-sharp-0.8.3_5 =========================================================================== =================================================== =========================================================================== =================================================== ===> License LGPL20 accepted by the user ===> Fetching all distfiles required by libgpod-sharp-0.8.3_5 for building =========================================================================== =================================================== ===> License LGPL20 accepted by the user ===> Fetching all distfiles required by libgpod-sharp-0.8.3_5 for building => SHA256 Checksum OK for libgpod-0.8.3.tar.bz2. =========================================================================== =================================================== =========================================================================== =================================================== ===> License LGPL20 accepted by the user ===> Fetching all distfiles required by libgpod-sharp-0.8.3_5 for building ===> Extracting for libgpod-sharp-0.8.3_5 => SHA256 Checksum OK for libgpod-0.8.3.tar.bz2. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for libgpod-sharp-0.8.3_5 /usr/bin/sed -i.bak 's/gmcs/mcs/g' /wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/configure /wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/m4/mono.m4 =========================================================================== =================================================== ===> libgpod-sharp-0.8.3_5 depends on executable: msgfmt - not found ===> Installing existing package /packages/All/gettext-tools-0.19.8.1.txz Installing gettext-tools-0.19.8.1... `-- Installing indexinfo-0.2.6... `-- Extracting indexinfo-0.2.6: .... done `-- Installing gettext-runtime-0.19.8.1_1... `-- Extracting gettext-runtime-0.19.8.1_1: .......... done Extracting gettext-tools-0.19.8.1: .......... done ===> libgpod-sharp-0.8.3_5 depends on executable: msgfmt - found ===> Returning to build of libgpod-sharp-0.8.3_5 ===> libgpod-sharp-0.8.3_5 depends on executable: gmake - not found ===> Installing existing package /packages/All/gmake-4.2.1_1.txz Installing gmake-4.2.1_1... Extracting gmake-4.2.1_1: .......... done ===> libgpod-sharp-0.8.3_5 depends on executable: gmake - found ===> Returning to build of libgpod-sharp-0.8.3_5 ===> libgpod-sharp-0.8.3_5 depends on package: pkgconf>=0.9.10 - not found ===> Installing existing package /packages/All/pkgconf-1.2.1_1.txz Installing pkgconf-1.2.1_1... Extracting pkgconf-1.2.1_1: .......... done ===> libgpod-sharp-0.8.3_5 depends on package: pkgconf>=0.9.10 - found ===> Returning to build of libgpod-sharp-0.8.3_5 ===> libgpod-sharp-0.8.3_5 depends on file: /usr/local/libdata/pkgconfig/gtk-sharp-2.0.pc - not found ===> Installing existing package /packages/All/gtk-sharp20-2.12.42.txz Installing gtk-sharp20-2.12.42... `-- Installing libxml2-2.9.4... `-- Extracting libxml2-2.9.4: .......... done `-- Installing mono-4.6.2.7... | `-- Installing libinotify-20140622... | `-- Extracting libinotify-20140622: ...... done | `-- Installing glib-2.46.2_4... | | `-- Installing libiconv-1.14_10... | | `-- Extracting libiconv-1.14_10: .......... done | | `-- Installing python27-2.7.13_1... | | `-- Installing expat-2.2.0_1... | | `-- Extracting expat-2.2.0_1: .......... done | | `-- Installing readline-6.3.8... | | | `-- Installing ncurses-6.0_3... | | | `-- Extracting ncurses-6.0_3: .......... done | | `-- Extracting readline-6.3.8: .......... done | | `-- Installing libffi-3.2.1... | | `-- Extracting libffi-3.2.1: .......... done | | `-- Installing libressl-2.4.5... | | `-- Extracting libressl-2.4.5: .......... done | | `-- Extracting python27-2.7.13_1: .......... done | | `-- Installing pcre-8.40... | | `-- Extracting pcre-8.40: .......... done | | `-- Installing perl5-5.24.1... | | `-- Extracting perl5-5.24.1: .......... done | `-- Extracting glib-2.46.2_4: .......... done No schema files found: doing nothing. `-- Extracting mono-4.6.2.7: .......... done `-- Installing pango-1.38.0_1... | `-- Installing encodings-1.0.4_3,1... | | `-- Installing font-util-1.3.1... | | `-- Extracting font-util-1.3.1: .......... done | `-- Extracting encodings-1.0.4_3,1: .......... done | `-- Installing fontconfig-2.12.1,1... | | `-- Installing freetype2-2.6.3... | | `-- Extracting freetype2-2.6.3: .......... done | `-- Extracting fontconfig-2.12.1,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: caching, new cache contents: 0 fonts, 2 dirs /usr/local/share/fonts/encodings: caching, new cache contents: 0 fonts, 1 dirs /usr/local/share/fonts/encodings/large: caching, new cache contents: 0 fonts, 0 dirs /usr/local/share/fonts/util: caching, new cache contents: 0 fonts, 0 dirs /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | `-- Installing libXft-2.3.2_1... | | `-- Installing xproto-7.0.31... | | `-- Extracting xproto-7.0.31: .......... done | | `-- Installing libXrender-0.9.10... | | `-- Installing renderproto-0.11.1... | | `-- Extracting renderproto-0.11.1: .... done | | `-- Installing libX11-1.6.4,1... | | | `-- Installing kbproto-1.0.7... | | | `-- Extracting kbproto-1.0.7: .......... done | | | `-- Installing libXdmcp-1.1.2... | | | `-- Extracting libXdmcp-1.1.2: ......... done | | | `-- Installing libxcb-1.12... | | | `-- Installing libpthread-stubs-0.3_6... | | | `-- Extracting libpthread-stubs-0.3_6: ..... done | | | `-- Installing libXau-1.0.8_3... | | | `-- Extracting libXau-1.0.8_3: .......... done | | | `-- Extracting libxcb-1.12: .......... done | | `-- Extracting libX11-1.6.4,1: .......... done | | `-- Extracting libXrender-0.9.10: .......... done | `-- Extracting libXft-2.3.2_1: ......... done | `-- Installing harfbuzz-1.4.1... | | `-- Installing cairo-1.14.6_1,2... | | `-- Installing glproto-1.4.17... | | `-- Extracting glproto-1.4.17: ...... done | | `-- Installing libEGL-11.2.2... | | | `-- Installing libdevq-0.0.4... | | | `-- Extracting libdevq-0.0.4: .......... done | | | `-- Installing libXdamage-1.1.4_3... | | | `-- Installing libXfixes-5.0.3... | | | | `-- Installing fixesproto-5.0... | | | | `-- Extracting fixesproto-5.0: .... done | | | `-- Extracting libXfixes-5.0.3: .......... done | | | `-- Installing damageproto-1.2.1... | | | `-- Extracting damageproto-1.2.1: .... done | | | `-- Extracting libXdamage-1.1.4_3: ...... done | | | `-- Installing libxshmfence-1.2... | | | `-- Extracting libxshmfence-1.2: ......... done | | | `-- Installing libXext-1.3.3_1,1... | | | `-- Installing xextproto-7.3.0... | | | `-- Extracting xextproto-7.3.0: .......... done | | | `-- Extracting libXext-1.3.3_1,1: .......... done | | | `-- Installing gbm-11.2.2... | | | `-- Installing libglapi-11.2.2... | | | | `-- Installing libXvMC-1.0.10... | | | | `-- Installing libXv-1.0.11,1... | | | | | `-- Installing videoproto-2.3.3... | | | | | `-- Extracting videoproto-2.3.3: ......... done | | | | `-- Extracting libXv-1.0.11,1: .......... done | | | | `-- Extracting libXvMC-1.0.10: .......... done | | | | `-- Installing libdrm-2.4.74_1,1... | | | | `-- Installing libpciaccess-0.13.4... | | | | | `-- Installing pciids-20170128... | | | | | `-- Extracting pciids-20170128: ..... done | | | | `-- Extracting libpciaccess-0.13.4: ...... done | | | | `-- Extracting libdrm-2.4.74_1,1: .......... done | | | | `-- Installing libelf-0.8.13_2... | | | | `-- Extracting libelf-0.8.13_2: .......... done | | | `-- Extracting libglapi-11.2.2: ... done | | | `-- Extracting gbm-11.2.2: ..... done | | | `-- Installing llvm37-3.7.1_4... | | | `-- Installing libedit-3.1.20150325_2,1... | | | `-- Extracting libedit-3.1.20150325_2,1: .......... done | | | `-- Extracting llvm37-3.7.1_4: .......... done | | `-- Extracting libEGL-11.2.2: .......... done | | `-- Installing libGL-11.2.2... | | | `-- Installing dri2proto-2.8... | | | `-- Extracting dri2proto-2.8: .... done | | | `-- Installing libXxf86vm-1.1.4_1... | | | `-- Installing xf86vidmodeproto-2.3.1... | | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | | `-- Extracting libGL-11.2.2: .......... done | | `-- Installing xcb-util-renderutil-0.3.9_1... | | | `-- Installing xcb-util-0.4.0_2,1... | | | `-- Extracting xcb-util-0.4.0_2,1: .......... done | | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done | | `-- Installing png-1.6.27... | | `-- Extracting png-1.6.27: .......... done | | `-- Installing pixman-0.34.0... | | `-- Extracting pixman-0.34.0: .......... done | | `-- Extracting cairo-1.14.6_1,2: .......... done | | `-- Installing icu-58.2,1... | | `-- Extracting icu-58.2,1: .......... done | | `-- Installing graphite2-1.3.9... | | `-- Extracting graphite2-1.3.9: .......... done | `-- Extracting harfbuzz-1.4.1: .......... done | `-- Installing xorg-fonts-truetype-7.7_1... | | `-- Installing font-misc-meltho-1.0.3_3... | | `-- Installing mkfontdir-1.0.7... | | | `-- Installing mkfontscale-1.1.2... | | | `-- Installing libfontenc-1.1.3_1... | | | `-- Extracting libfontenc-1.1.3_1: ......... done | | | `-- Extracting mkfontscale-1.1.2: .. done | | `-- Extracting mkfontdir-1.0.7: .. done | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done | | `-- Installing font-bh-ttf-1.0.3_3... | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | `-- Installing font-misc-ethiopic-1.0.3_3... | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | `-- Installing dejavu-2.37... | | `-- Extracting dejavu-2.37: .......... done `-- Extracting pango-1.38.0_1: .......... done `-- Installing p5-XML-LibXML-2.0128,1... | `-- Installing p5-XML-NamespaceSupport-1.11_1... | `-- Extracting p5-XML-NamespaceSupport-1.11_1: ... done | `-- Installing p5-XML-SAX-0.99_2... | | `-- Installing p5-XML-SAX-Base-1.08_1... | | `-- Extracting p5-XML-SAX-Base-1.08_1: .......... done | `-- Extracting p5-XML-SAX-0.99_2: .......... done `-- Extracting p5-XML-LibXML-2.0128,1: .......... done `-- Installing gtk2-2.24.29_3... | `-- Installing hicolor-icon-theme-0.15... | `-- Extracting hicolor-icon-theme-0.15: . done | `-- Installing gtk-update-icon-cache-2.24.29... | | `-- Installing libXcursor-1.1.14_3... | | `-- Extracting libXcursor-1.1.14_3: .......... done | | `-- Installing libXinerama-1.1.3_3,1... | | `-- Installing xineramaproto-1.2.1... | | `-- Extracting xineramaproto-1.2.1: .. done | | `-- Extracting libXinerama-1.1.3_3,1: .......... done | | `-- Installing libXcomposite-0.4.4_3,1... | | `-- Installing compositeproto-0.4.2... | | `-- Extracting compositeproto-0.4.2: .... done | | `-- Extracting libXcomposite-0.4.4_3,1: .......... done | | `-- Installing libXi-1.7.9,1... | | `-- Installing inputproto-2.3.2... | | `-- Extracting inputproto-2.3.2: ........ done | | `-- Extracting libXi-1.7.9,1: .......... done | | `-- Installing atk-2.18.0... | | `-- Extracting atk-2.18.0: .......... done | | `-- Installing libXrandr-1.5.1... | | `-- Installing randrproto-1.5.0... | | `-- Extracting randrproto-1.5.0: .... done | | `-- Extracting libXrandr-1.5.1: .......... done | | `-- Installing gdk-pixbuf2-2.32.3_1... | | `-- Installing jasper-1.900.1_16... | | | `-- Installing jpeg-turbo-1.5.1... | | | `-- Extracting jpeg-turbo-1.5.1: .......... done | | `-- Extracting jasper-1.900.1_16: .......... done | | `-- Installing libXt-1.1.5,1... | | | `-- Installing libSM-1.2.2_3,1... | | | `-- Installing libICE-1.0.9_1,1... | | | `-- Extracting libICE-1.0.9_1,1: .......... done | | | `-- Extracting libSM-1.2.2_3,1: .......... done | | `-- Extracting libXt-1.1.5,1: .......... done | | `-- Installing tiff-4.0.7_1... | | | `-- Installing jbigkit-2.1_1... | | | `-- Extracting jbigkit-2.1_1: .......... done | | `-- Extracting tiff-4.0.7_1: .......... done | | `-- Extracting gdk-pixbuf2-2.32.3_1: .......... done | | `-- Installing shared-mime-info-1.5... | | `-- Extracting shared-mime-info-1.5: .......... done | `-- Extracting gtk-update-icon-cache-2.24.29: .... done | `-- Installing cups-2.2.2_1... | | `-- Installing avahi-app-0.6.31_5... | | `-- Installing gnome_subr-1.0... | | `-- Extracting gnome_subr-1.0: . done | | `-- Installing gobject-introspection-1.46.0... | | | `-- Installing python2-2_3... | | | `-- Extracting python2-2_3: ...... done | | `-- Extracting gobject-introspection-1.46.0: .......... done | | `-- Installing gdbm-1.12... | | `-- Extracting gdbm-1.12: .......... done | | `-- Installing libdaemon-0.14_1... | | `-- Extracting libdaemon-0.14_1: .......... done | | `-- Installing dbus-glib-0.104... | | | `-- Installing dbus-1.10.14_2... ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | | | `-- Extracting dbus-1.10.14_2: ......... done | | `-- Extracting dbus-glib-0.104: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. | | `-- Extracting avahi-app-0.6.31_5: .......... done | | `-- Installing gnutls-3.5.8... | | `-- Installing nettle-3.3... | | | `-- Installing gmp-5.1.3_3... | | | `-- Extracting gmp-5.1.3_3: .......... done | | `-- Extracting nettle-3.3: .......... done | | `-- Installing ca_root_nss-3.28.1... | | `-- Extracting ca_root_nss-3.28.1: ........ done | | `-- Installing libtasn1-4.10... | | `-- Extracting libtasn1-4.10: .......... done | | `-- Installing trousers-0.3.14_1... | | | `-- Installing tpm-emulator-0.7.4_1... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. | | | `-- Extracting tpm-emulator-0.7.4_1: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting trousers-0.3.14_1: .......... done | | `-- Installing p11-kit-0.23.3... | | `-- Extracting p11-kit-0.23.3: .......... done | | `-- Installing libunistring-0.9.7... | | `-- Extracting libunistring-0.9.7: .......... done | | `-- Installing libidn-1.33_1... | | `-- Extracting libidn-1.33_1: .......... done | | `-- Extracting gnutls-3.5.8: .......... done | | `-- Installing libpaper-1.1.24.4... | | `-- Extracting libpaper-1.1.24.4: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. | `-- Extracting cups-2.2.2_1: .......... done `-- Extracting gtk2-2.24.29_3: .......... done `-- Installing libglade2-2.6.4_8... | `-- Installing xmlcatmgr-2.2_2... | `-- Extracting xmlcatmgr-2.2_2: ......... done + Creating /usr/local/share/sgml/catalog + Registering CATALOG catalog.ports (SGML) + Creating /usr/local/share/sgml/catalog.ports + Creating /usr/local/share/xml/catalog + Registering nextCatalog catalog.ports (XML) + Creating /usr/local/share/xml/catalog.ports `-- Extracting libglade2-2.6.4_8: .......... done Extracting gtk-sharp20-2.12.42: .......... done Message from libinotify-20140622: ============================================================================ You might want to consider increasing the kern.maxfiles tunable if you plan to use this library for applications that need to monitor activity of a lot of files. For a typical desktop, add the following line to /boot/loader.conf, then reboot the system: kern.maxfiles="25000" ============================================================================= Message from ncurses-6.0_3: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from python27-2.7.13_1: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== Message from perl5-5.24.1: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Message from mono-4.6.2.7: ************************************************************************ If you have build/runtime errors with Mono and Gtk# apps please try the following first: * Build Mono and gtk+ (x11-toolkits/gtk20) without CPUTYPE and with the default FreeBSD CFLAGS ('-O2 -fno-strict-aliasing -pipe') as Mono has been known to expose compiler bugs. * Try building and running Mono with the GENERIC kernel. - Mono requires SYSVSHM, SYSVMSG, and SYSVSEM which are part of the GENERIC kernel. - Removing kernel options or changing defaults to use experimental options can adversely affect Mono's ability to build and run. * Remove leftover semaphores / increase semaphore limits. - Close apps which use Mono and run `ipcs -sbt`. Remove the semaphores with MODE "--rw-------" and NSEMS "8" using ipcrm (1) - _OR_ simply reboot which is the safest method. - On multi-user systems the semaphore limits may need to be increased from the defaults. The following should comfortably support 30 users. # echo "kern.ipc.semmni=40" >> /boot/loader.conf # echo "kern.ipc.semmns=300" >> /boot/loader.conf * If you are in a jailed environment, ensure System V IPC are enabled. You can rely on the security.jail.sysvipc_allowed sysctl to check this status. The following enables this feature on the host system: # echo "jail_sysvipc_allow=\"YES\"" >> /etc/rc.conf * Some process information are acceded through /proc (e.g. when using NUnit) and procfs(5) has to be mounted for these features to work: # echo "proc /proc procfs rw 0 0" >> /etc/fstab ************************************************************************ Message from dejavu-2.37: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from ca_root_nss-3.28.1: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.14_1: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Message from xmlcatmgr-2.2_2: The following catalogs are installed: 1) /usr/local/share/sgml/catalog The top level catalog for SGML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 2) /usr/local/share/sgml/catalog.ports This catalog is for handling SGML stuff installed under /usr/local/share/sgml. It is changed by ports/packages. 3) /usr/local/share/xml/catalog The top level catalog for XML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 4) /usr/local/share/xml/catalog.ports This catalog is for handling XML stuff installed under /usr/local/share/xml. It is changed by ports/packages. ===> libgpod-sharp-0.8.3_5 depends on file: /usr/local/libdata/pkgconfig/gtk-sharp-2.0.pc - found ===> Returning to build of libgpod-sharp-0.8.3_5 ===> libgpod-sharp-0.8.3_5 depends on file: /usr/local/bin/intltool-extract - not found ===> Installing existing package /packages/All/intltool-0.51.0_1.txz Installing intltool-0.51.0_1... `-- Installing p5-XML-Parser-2.44... `-- Extracting p5-XML-Parser-2.44: .......... done Extracting intltool-0.51.0_1: .......... done ===> libgpod-sharp-0.8.3_5 depends on file: /usr/local/bin/intltool-extract - found ===> Returning to build of libgpod-sharp-0.8.3_5 =========================================================================== =================================================== ===> libgpod-sharp-0.8.3_5 depends on shared library: libplist.so - not found ===> Installing existing package /packages/All/libplist-1.12.txz Installing libplist-1.12... Extracting libplist-1.12: .......... done ===> libgpod-sharp-0.8.3_5 depends on shared library: libplist.so - found (/usr/local/lib/libplist.so) ===> Returning to build of libgpod-sharp-0.8.3_5 ===> libgpod-sharp-0.8.3_5 depends on shared library: libtag.so - not found ===> Installing existing package /packages/All/taglib-1.10.txz Installing taglib-1.10... Extracting taglib-1.10: .......... done ===> libgpod-sharp-0.8.3_5 depends on shared library: libtag.so - found (/usr/local/lib/libtag.so) ===> Returning to build of libgpod-sharp-0.8.3_5 ===> libgpod-sharp-0.8.3_5 depends on shared library: libsgutils2.so - not found ===> Installing existing package /packages/All/sg3_utils-1.42.txz Installing sg3_utils-1.42... Extracting sg3_utils-1.42: .......... done ===> libgpod-sharp-0.8.3_5 depends on shared library: libsgutils2.so - found (/usr/local/lib/libsgutils2.so) ===> Returning to build of libgpod-sharp-0.8.3_5 ===> libgpod-sharp-0.8.3_5 depends on shared library: libintl.so - found (/usr/local/lib/libintl.so) ===> libgpod-sharp-0.8.3_5 depends on shared library: libsqlite3.so - not found ===> Installing existing package /packages/All/sqlite3-3.16.2.txz Installing sqlite3-3.16.2... Extracting sqlite3-3.16.2: .......... done ===> libgpod-sharp-0.8.3_5 depends on shared library: libsqlite3.so - found (/usr/local/lib/libsqlite3.so) ===> Returning to build of libgpod-sharp-0.8.3_5 ===> libgpod-sharp-0.8.3_5 depends on shared library: libatk-1.0.so - found (/usr/local/lib/libatk-1.0.so) ===> libgpod-sharp-0.8.3_5 depends on shared library: libgdk_pixbuf-2.0.so - found (/usr/local/lib/libgdk_pixbuf-2.0.so) ===> libgpod-sharp-0.8.3_5 depends on shared library: libglib-2.0.so - found (/usr/local/lib/libglib-2.0.so) ===> libgpod-sharp-0.8.3_5 depends on shared library: libgtk-x11-2.0.so - found (/usr/local/lib/libgtk-x11-2.0.so) ===> libgpod-sharp-0.8.3_5 depends on shared library: libxml2.so - found (/usr/local/lib/libxml2.so) ===> libgpod-sharp-0.8.3_5 depends on shared library: libpango-1.0.so - found (/usr/local/lib/libpango-1.0.so) =========================================================================== =================================================== ===> Configuring for libgpod-sharp-0.8.3_5 configure: loading site script /usr/ports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether gmake sets $(MAKE)... yes checking whether gmake supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by gmake... GNU checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... gcc3 checking how to run the C preprocessor... cpp checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for minix/config.h... (cached) no checking whether it is safe to define __EXTENSIONS__... yes checking for gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ISO C89... (cached) none needed checking dependency style of cc... (cached) gcc3 checking whether cc understands -c and -o together... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking build system type... x86_64-portbld-dragonfly4.7 checking host system type... x86_64-portbld-dragonfly4.7 checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for fgrep... (cached) /usr/bin/fgrep checking how to print strings... printf checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for ANSI C header files... (cached) yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... (cached) 262144 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... no checking how to convert x86_64-portbld-dragonfly4.7 file names to x86_64-portbld-dragonfly4.7 format... func_convert_file_noop checking how to convert x86_64-portbld-dragonfly4.7 file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from cc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... (cached) yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly4.7 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C++ preprocessor... c++ -E checking for ld used by c++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC -DPIC checking if c++ PIC flag -fPIC -DPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking if c++ supports -c -o file.o... (cached) yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly4.7 ld.so checking how to hardcode library paths into programs... immediate checking whether ln -s works... yes checking whether gmake sets $(MAKE)... (cached) yes checking whether NLS is requested... yes checking for intltool >= 0.21... 0.51.0 found checking for intltool-update... /usr/local/bin/intltool-update checking for intltool-merge... /usr/local/bin/intltool-merge checking for intltool-extract... /usr/local/bin/intltool-extract checking for xgettext... /usr/local/bin/xgettext checking for msgmerge... /usr/local/bin/msgmerge checking for msgfmt... /usr/local/bin/msgfmt checking for gmsgfmt... /usr/local/bin/msgfmt checking for perl... /usr/local/bin/perl checking for perl >= 5.8.1... 5.24.1 checking for XML::Parser... ok checking for localtime_r... yes checking for struct tm.tm_gmtoff... yes checking pkg-config is at least version 0.9.0... yes checking for LIBGPOD... yes checking for g_int64_hash... yes checking for g_int64_equal... yes checking for g_checksum_reset... yes checking for g_mapped_file_unref... yes checking for sg_ll_inquiry in -lsgutils2... yes checking for LIBUSB... yes checking for inflate in -lz... yes checking for TAGLIB... yes checking for LIBXML... yes checking for GDKPIXBUF... yes checking for PYGOBJECT... no checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for ngettext in libc... no checking for bindtextdomain in -lintl... yes checking for ngettext in -lintl... yes checking for dgettext in -lintl... yes checking for bind_textdomain_codeset... yes checking for msgfmt... (cached) /usr/local/bin/msgfmt checking for dcgettext... yes checking if msgfmt accepts -c... yes checking for gmsgfmt... (cached) /usr/local/bin/msgfmt checking for xgettext... (cached) /usr/local/bin/xgettext checking for catalogs to be installed... de es fr he it ja ro sv zh_CN checking for gtkdoc-check... no checking for gtkdoc-rebase... no checking for gtkdoc-mkpdf... no checking whether to build gtk-doc documentation... no checking whether to build python bindings... no checking whether to build mono bindings... yes checking for MONO_MODULE... yes checking for mcs... /usr/local/bin/mcs checking for mono... /usr/local/bin/mono checking for GDKSHARP... yes checking for GLIBSHARP... yes checking alignment of double... 8 checking for more warnings... no checking whether gmake supports nested variables... (cached) yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating bindings/Makefile config.status: creating bindings/mono/Makefile config.status: creating bindings/mono/libgpod-sharp/libgpod-sharp.pc config.status: creating bindings/mono/libgpod-sharp/Makefile config.status: creating bindings/mono/libgpod-sharp-test/Makefile config.status: creating bindings/mono/libgpod-sharp-test/libgpod-sharp-test config.status: creating bindings/python/gpod.i config.status: creating bindings/python/Makefile config.status: creating bindings/python/examples/Makefile config.status: creating bindings/python/tests/Makefile config.status: creating docs/Makefile config.status: creating docs/reference/Makefile config.status: creating docs/reference/version.xml config.status: creating m4/Makefile config.status: creating po/Makefile.in config.status: creating src/Makefile config.status: creating tools/Makefile config.status: creating tests/Makefile config.status: creating libgpod-1.0.pc config.status: creating tools/90-libgpod.rules config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing default-1 commands config.status: executing po/stamp-it commands Configuration for libgpod 0.8.3 : -------------------------------- Host System Type .........: x86_64-portbld-dragonfly4.7 Install path .............: /usr/local Preprocessor .............: cc -isystem /usr/local/include Compiler .................: cc -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -std=gnu89 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/libxml2 -pthread -I/usr/local/include/libxml2 -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -pthread -I/usr/local/include/libpng16 Linker ...................: cc -L/usr/local/lib -L/usr/local/lib -lgobject-2.0 -lsqlite3 -lplist -Wl,--export-dynamic -lgmodule-2.0 -pthread -lglib-2.0 -lintl -L/usr/local/lib -lxml2 -L/usr/local/lib -lgdk_pixbuf-2.0 -lgobject-2.0 -lglib-2.0 -lintl Artwork support ..........: yes Mono bindings ............: yes Python bindings ..........: no PyGObject support ........: no iPhone/iPod Touch support.: Temporary mount directory.: /tmp/ Now type 'make' to build libgpod 0.8.3, and then 'make install' for installation. =========================================================================== =================================================== ===> Building for libgpod-sharp-0.8.3_5 gmake[1]: Entering directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono' Making all in libgpod-sharp gmake[2]: Entering directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono/libgpod-sharp' grep: ../../../src/libgpod.la: No such file or directory /usr/local/bin/mcs -debug -unsafe -target:library -out:libgpod-sharp.dll -r:/usr/local/libdata/pkgconfig/../../lib/mono/gtk-sharp-2.0/glib-sharp.dll -r:/usr/local/libdata/pkgconfig/../../lib/mono/gtk-sharp-2.0/pango-sharp.dll -r:/usr/local/libdata/pkgconfig/../../lib/mono/gtk-sharp-2.0/atk-sharp.dll -r:/usr/local/libdata/pkgconfig/../../lib/mono/gtk-sharp-2.0/gdk-sharp.dll -r:/usr/local/libdata/pkgconfig/../../lib/mono/gtk-sharp-2.0/gtk-sharp.dll -r:/usr/local/libdata/pkgconfig/../../lib/mono/gtk-sharp-2.0/glib-sharp.dll ./Artwork.cs ./AssemblyInfo.cs ./Chapter.cs ./ChapterData.cs ./Device.cs ./GPodBase.cs ./GPodList.cs ./IpodInfo.cs ./ITDB.cs ./PhotoAlbum.cs ./PhotoDB.cs ./Playlist.cs ./Thumbnail.cs ./Track.cs sed "s/@DLNAME@//g" ../../../bindings/mono/libgpod-sharp/libgpod-sharp.dll.config.in >libgpod-sharp.dll.config gmake[2]: Leaving directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono/libgpod-sharp' Making all in libgpod-sharp-test gmake[2]: Entering directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono/libgpod-sharp-test' /usr/local/bin/mcs -debug -unsafe -target:exe -out:libgpod-sharp-test.exe -r:../libgpod-sharp/libgpod-sharp.dll ./AssemblyInfo.cs ./Main.cs gmake[2]: Leaving directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono/libgpod-sharp-test' gmake[2]: Entering directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono' gmake[2]: Nothing to be done for 'all-am'. gmake[2]: Leaving directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono' gmake[1]: Leaving directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono' =========================================================================== =================================================== ===> libgpod-sharp-0.8.3_5 depends on file: /usr/local/lib/libgpod.so - not found ===> Installing existing package /packages/All/libgpod-0.8.3_5.txz Installing libgpod-0.8.3_5... `-- Installing libimobiledevice-1.2.0... | `-- Installing libusbmuxd-1.0.10... | `-- Extracting libusbmuxd-1.0.10: .......... done `-- Extracting libimobiledevice-1.2.0: .......... done Extracting libgpod-0.8.3_5: .......... done ===> libgpod-sharp-0.8.3_5 depends on file: /usr/local/lib/libgpod.so - found ===> Returning to build of libgpod-sharp-0.8.3_5 ===> libgpod-sharp-0.8.3_5 depends on file: /usr/local/libdata/pkgconfig/gtk-sharp-2.0.pc - found =========================================================================== =================================================== ===> Staging for libgpod-sharp-0.8.3_5 ===> Generating temporary packing list gmake[1]: Entering directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono' if test -z 'strip'; then \ gmake INSTALL_PROGRAM="/bin/sh /wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/install-sh -c -s" \ install_sh_PROGRAM="/bin/sh /wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ install; \ else \ gmake INSTALL_PROGRAM="/bin/sh /wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/install-sh -c -s" \ install_sh_PROGRAM="/bin/sh /wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='strip'" install; \ fi gmake[2]: Entering directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono' Making install in libgpod-sharp gmake[3]: Entering directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono/libgpod-sharp' grep: ../../../src/libgpod.la: No such file or directory gmake[4]: Entering directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono/libgpod-sharp' grep: ../../../src/libgpod.la: No such file or directory gmake[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/wrkdirs/audio/libgpod-sharp/stage/usr/local/lib/libgpod' install -m 555 libgpod-sharp.dll libgpod-sharp.dll.mdb libgpod-sharp.dll.config '/wrkdirs/audio/libgpod-sharp/stage/usr/local/lib/libgpod' /bin/mkdir -p '/wrkdirs/audio/libgpod-sharp/stage/usr/local/libdata/pkgconfig' install -m 0644 libgpod-sharp.pc '/wrkdirs/audio/libgpod-sharp/stage/usr/local/libdata/pkgconfig' gmake[4]: Leaving directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono/libgpod-sharp' gmake[3]: Leaving directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono/libgpod-sharp' Making install in libgpod-sharp-test gmake[3]: Entering directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono/libgpod-sharp-test' gmake[4]: Entering directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono/libgpod-sharp-test' gmake[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/wrkdirs/audio/libgpod-sharp/stage/usr/local/lib/libgpod' install -m 555 libgpod-sharp-test.exe libgpod-sharp-test.exe.mdb '/wrkdirs/audio/libgpod-sharp/stage/usr/local/lib/libgpod' gmake[4]: Leaving directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono/libgpod-sharp-test' gmake[3]: Leaving directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono/libgpod-sharp-test' gmake[3]: Entering directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono' gmake[4]: Entering directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono' gmake[4]: Nothing to be done for 'install-exec-am'. gmake[4]: Nothing to be done for 'install-data-am'. gmake[4]: Leaving directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono' gmake[3]: Leaving directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono' gmake[2]: Leaving directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono' gmake[1]: Leaving directory '/wrkdirs/audio/libgpod-sharp/libgpod-0.8.3/bindings/mono' ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for libgpod-sharp-0.8.3_5 file sizes/checksums [9]: . done packing files [9]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for libgpod-sharp-0.8.3_5 build of audio/libgpod-sharp ended at Mon Mar 13 00:41:56 PDT 2017 build time: 00:02:24