=> Building audio/glurp build started at Sat Oct 8 14:26:18 PDT 2016 port directory: /usr/ports/audio/glurp building for: DragonFly pkgbox64.dragonflybsd.org 4.7-DEVELOPMENT DragonFly v4.7.0.78.g7d868-DEVELOPMENT #7: Mon Aug 1 22:25:32 PDT 2016 root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 maintained by: ports@mark.reidel.info ident warning: no id keywords in /build/boomdata/data/.m/Release46-default/ref/../07//usr/ports/audio/glurp/Makefile Makefile ident: Poudriere version: 3.1-pre Host OSVERSION: 400700 Jail OSVERSION: 400600 ---Begin Environment--- STATUS=1 SAVED_TERM=screen MASTERMNT=/build/boomdata/data/.m/Release46-default/ref PATH=/usr/local/libexec/poudriere:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/xorg/bin:/usr/X11R6/bin:/root/bin:/sbin:/usr/sbin POUDRIERE_BUILD_TYPE=bulk PKGNAME=glurp-0.12.3_3 OLDPWD=/root/boom PWD=/build/boomdata/data/.m/Release46-default/ref/.p/pool MASTERNAME=Release46-default TERM=cons25 USER=root HOME=/root POUDRIERE_VERSION=3.1-pre LOCALBASE=/usr/local PACKAGE_BUILDING=yes ---End Environment--- ---Begin OPTIONS List--- ---End OPTIONS List--- --CONFIGURE_ARGS-- --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- MAKE=gmake PKG_CONFIG=pkgconf XDG_DATA_HOME=/wrkdirs/audio/glurp XDG_CONFIG_HOME=/wrkdirs/audio/glurp HOME=/wrkdirs/audio/glurp TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc50 CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/audio/glurp XDG_CONFIG_HOME=/wrkdirs/audio/glurp HOME=/wrkdirs/audio/glurp TMPDIR="/tmp" NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc50 PREFIX=/usr/local LOCALBASE=/usr/local LIBDIR="/usr/lib" NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing" CPP="cpp" CPPFLAGS="" LDFLAGS="" LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing" MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 444" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- GTK2_VERSION="2.10.0" GTK3_VERSION="3.0.0" OSREL=4.6 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local PORTDOCS="" PORTEXAMPLES="" LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/glurp" EXAMPLESDIR="share/examples/glurp" DATADIR="share/glurp" WWWDIR="www/glurp" ETCDIR="etc/glurp" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/glurp DOCSDIR=/usr/local/share/doc/glurp EXAMPLESDIR=/usr/local/share/examples/glurp WWWDIR=/usr/local/www/glurp ETCDIR=/usr/local/etc/glurp --End SUB_LIST-- ---Begin make.conf--- NO_BACKUP=yes USE_PACKAGE_DEPENDS=yes PKG_CREATE_VERBOSE=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORT_DBDIR=/options PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles MAKE_JOBS_NUMBER=5 ---End make.conf--- =================================================== =========================================================================== =================================================== ===> glurp-0.12.3_3 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.8.7_3.txz Installing pkg-1.8.7_3... Extracting pkg-1.8.7_3: .......... done ===> glurp-0.12.3_3 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of glurp-0.12.3_3 =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by glurp-0.12.3_3 for building =========================================================================== =================================================== ===> Fetching all distfiles required by glurp-0.12.3_3 for building => SHA256 Checksum OK for glurp-0.12.3.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by glurp-0.12.3_3 for building ===> Extracting for glurp-0.12.3_3 => SHA256 Checksum OK for glurp-0.12.3.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for glurp-0.12.3_3 =========================================================================== =================================================== ===> glurp-0.12.3_3 depends on executable: gmake - not found ===> Installing existing package /packages/All/gmake-4.2.1_1.txz Installing gmake-4.2.1_1... `-- Installing indexinfo-0.2.5... `-- Extracting indexinfo-0.2.5: .... done `-- Installing gettext-runtime-0.19.8.1... `-- Extracting gettext-runtime-0.19.8.1: .......... done Extracting gmake-4.2.1_1: .......... done ===> glurp-0.12.3_3 depends on executable: gmake - found ===> Returning to build of glurp-0.12.3_3 ===> glurp-0.12.3_3 depends on package: pkgconf>=0.9.10 - not found ===> Installing existing package /packages/All/pkgconf-1.0.1.txz Installing pkgconf-1.0.1... Extracting pkgconf-1.0.1: .......... done ===> glurp-0.12.3_3 depends on package: pkgconf>=0.9.10 - found ===> Returning to build of glurp-0.12.3_3 =========================================================================== =================================================== ===> glurp-0.12.3_3 depends on shared library: libmpd.so - not found ===> Installing existing package /packages/All/libmpd-11.8.17_2.txz Installing libmpd-11.8.17_2... `-- Installing glib-2.46.2_3... | `-- Installing libiconv-1.14_9... | `-- Extracting libiconv-1.14_9: .......... done | `-- Installing python27-2.7.12... | | `-- Installing expat-2.2.0... | | `-- Extracting expat-2.2.0: .......... done | | `-- Installing readline-6.3.8... | | `-- Installing ncurses-6.0_5... | | `-- Extracting ncurses-6.0_5: .......... done | | `-- Extracting readline-6.3.8: .......... done | | `-- Installing libffi-3.2.1... | | `-- Extracting libffi-3.2.1: .......... done | `-- Extracting python27-2.7.12: .......... done | `-- Installing pcre-8.39... | `-- Extracting pcre-8.39: .......... done | `-- Installing perl5-5.20.3_15... | `-- Extracting perl5-5.20.3_15: .......... done `-- Extracting glib-2.46.2_3: .......... done No schema files found: doing nothing. Extracting libmpd-11.8.17_2: .......... done Message from ncurses-6.0_5: ===> NOTICE: The ncurses port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from python27-2.7.12: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== Message from perl5-5.20.3_15: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Message from libmpd-11.8.17_2: ===> NOTICE: The libmpd port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> glurp-0.12.3_3 depends on shared library: libmpd.so - found (/usr/local/lib/libmpd.so) ===> Returning to build of glurp-0.12.3_3 ===> glurp-0.12.3_3 depends on shared library: libatk-1.0.so - not found ===> Installing existing package /packages/All/atk-2.18.0.txz Installing atk-2.18.0... Extracting atk-2.18.0: .......... done ===> glurp-0.12.3_3 depends on shared library: libatk-1.0.so - found (/usr/local/lib/libatk-1.0.so) ===> Returning to build of glurp-0.12.3_3 ===> glurp-0.12.3_3 depends on shared library: libglib-2.0.so - found (/usr/local/lib/libglib-2.0.so) ===> glurp-0.12.3_3 depends on shared library: libgtk-x11-2.0.so - not found ===> Installing existing package /packages/All/gtk2-2.24.29_2.txz Installing gtk2-2.24.29_2... `-- Installing hicolor-icon-theme-0.15... `-- Extracting hicolor-icon-theme-0.15: . done `-- Installing libXdamage-1.1.4_3... | `-- Installing libXfixes-5.0.1_3... | | `-- Installing xproto-7.0.28... | | `-- Extracting xproto-7.0.28: .......... done | | `-- Installing fixesproto-5.0... | | `-- Extracting fixesproto-5.0: .... done | | `-- Installing libX11-1.6.3,1... | | `-- Installing kbproto-1.0.7... | | `-- Extracting kbproto-1.0.7: .......... done | | `-- Installing libXdmcp-1.1.2... | | `-- Extracting libXdmcp-1.1.2: ......... done | | `-- Installing libxcb-1.11.1... | | | `-- Installing libxml2-2.9.4... | | | `-- Extracting libxml2-2.9.4: .......... done | | | `-- Installing libpthread-stubs-0.3_6... | | | `-- Extracting libpthread-stubs-0.3_6: ..... done | | | `-- Installing libXau-1.0.8_3... | | | `-- Extracting libXau-1.0.8_3: .......... done | | `-- Extracting libxcb-1.11.1: .......... done | | `-- Extracting libX11-1.6.3,1: .......... done | `-- Extracting libXfixes-5.0.1_3: .......... done | `-- Installing damageproto-1.2.1... | `-- Extracting damageproto-1.2.1: .... done `-- Extracting libXdamage-1.1.4_3: ...... done `-- Installing gtk-update-icon-cache-2.24.29... | `-- Installing pango-1.38.0_1... | | `-- Installing encodings-1.0.4_3,1... | | `-- Installing font-util-1.3.1... | | `-- Extracting font-util-1.3.1: .......... done | | `-- Extracting encodings-1.0.4_3,1: .......... done | | `-- Installing fontconfig-2.12.1,1... | | `-- Installing freetype2-2.6.3... | | `-- Extracting freetype2-2.6.3: .......... done | | `-- Extracting fontconfig-2.12.1,1: .......... done Running fc-cache to build fontconfig cache... /usr/local/share/fonts: caching, new cache contents: 0 fonts, 2 dirs /usr/local/share/fonts/encodings: caching, new cache contents: 0 fonts, 1 dirs /usr/local/share/fonts/encodings/large: caching, new cache contents: 0 fonts, 0 dirs /usr/local/share/fonts/util: caching, new cache contents: 0 fonts, 0 dirs /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded | | `-- Installing libXft-2.3.2_1... | | `-- Installing libXrender-0.9.9... | | | `-- Installing renderproto-0.11.1... | | | `-- Extracting renderproto-0.11.1: .... done | | `-- Extracting libXrender-0.9.9: .......... done | | `-- Extracting libXft-2.3.2_1: ......... done | | `-- Installing harfbuzz-1.3.2... | | `-- Installing cairo-1.14.6_1,2... | | | `-- Installing glproto-1.4.17... | | | `-- Extracting glproto-1.4.17: ...... done | | | `-- Installing libEGL-11.2.2... | | | `-- Installing libdevq-0.0.2_1... | | | `-- Extracting libdevq-0.0.2_1: ....... done | | | `-- Installing libxshmfence-1.2... | | | `-- Extracting libxshmfence-1.2: ......... done | | | `-- Installing libXext-1.3.3_1,1... | | | | `-- Installing xextproto-7.3.0... | | | | `-- Extracting xextproto-7.3.0: .......... done | | | `-- Extracting libXext-1.3.3_1,1: .......... done | | | `-- Installing gbm-11.2.2... | | | | `-- Installing libglapi-11.2.2... | | | | `-- Installing libXvMC-1.0.9... | | | | | `-- Installing libXv-1.0.10_3,1... | | | | | `-- Installing videoproto-2.3.2... | | | | | `-- Extracting videoproto-2.3.2: ...... done | | | | | `-- Extracting libXv-1.0.10_3,1: .......... done | | | | `-- Extracting libXvMC-1.0.9: .......... done | | | | `-- Installing libdrm-2.4.66,1... | | | | | `-- Installing libpciaccess-0.13.4... | | | | | `-- Installing pciids-20160621... | | | | | `-- Extracting pciids-20160621: ..... done | | | | | `-- Extracting libpciaccess-0.13.4: ...... done | | | | `-- Extracting libdrm-2.4.66,1: .......... done | | | | `-- Installing libelf-0.8.13_1... | | | | `-- Extracting libelf-0.8.13_1: .......... done | | | | `-- Extracting libglapi-11.2.2: ... done | | | `-- Extracting gbm-11.2.2: ..... done | | | `-- Installing llvm37-3.7.1_3... | | | | `-- Installing libedit-3.1.20150325_2,1... | | | | `-- Extracting libedit-3.1.20150325_2,1: .......... done | | | `-- Extracting llvm37-3.7.1_3: .......... done | | | `-- Extracting libEGL-11.2.2: .......... done | | | `-- Installing libGL-11.2.2... | | | `-- Installing dri2proto-2.8... | | | `-- Extracting dri2proto-2.8: .... done | | | `-- Installing libXxf86vm-1.1.4_1... | | | | `-- Installing xf86vidmodeproto-2.3.1... | | | | `-- Extracting xf86vidmodeproto-2.3.1: .... done | | | `-- Extracting libXxf86vm-1.1.4_1: .......... done | | | `-- Extracting libGL-11.2.2: .......... done | | | `-- Installing xcb-util-renderutil-0.3.9_1... | | | `-- Installing xcb-util-0.4.0_1,1... | | | `-- Extracting xcb-util-0.4.0_1,1: .......... done | | | `-- Extracting xcb-util-renderutil-0.3.9_1: ...... done | | | `-- Installing png-1.6.23... | | | `-- Extracting png-1.6.23: .......... done | | | `-- Installing pixman-0.34.0... | | | `-- Extracting pixman-0.34.0: .......... done | | `-- Extracting cairo-1.14.6_1,2: .......... done | | `-- Installing icu-57.1,1... | | `-- Extracting icu-57.1,1: .......... done | | `-- Installing graphite2-1.3.8... | | `-- Extracting graphite2-1.3.8: .......... done | | `-- Extracting harfbuzz-1.3.2: .......... done | | `-- Installing xorg-fonts-truetype-7.7_1... | | `-- Installing font-misc-meltho-1.0.3_3... | | | `-- Installing mkfontdir-1.0.7... | | | `-- Installing mkfontscale-1.1.2... | | | | `-- Installing libfontenc-1.1.3... | | | | `-- Extracting libfontenc-1.1.3: ...... done | | | `-- Extracting mkfontscale-1.1.2: .. done | | | `-- Extracting mkfontdir-1.0.7: .. done | | `-- Extracting font-misc-meltho-1.0.3_3: .......... done | | `-- Installing font-bh-ttf-1.0.3_3... | | `-- Extracting font-bh-ttf-1.0.3_3: .......... done | | `-- Installing font-misc-ethiopic-1.0.3_3... | | `-- Extracting font-misc-ethiopic-1.0.3_3: ... done | | `-- Installing dejavu-2.35... | | `-- Extracting dejavu-2.35: .......... done | `-- Extracting pango-1.38.0_1: .......... done | `-- Installing libXcursor-1.1.14_3... | `-- Extracting libXcursor-1.1.14_3: .......... done | `-- Installing libXinerama-1.1.3_3,1... | | `-- Installing xineramaproto-1.2.1... | | `-- Extracting xineramaproto-1.2.1: .. done | `-- Extracting libXinerama-1.1.3_3,1: .......... done | `-- Installing libXcomposite-0.4.4_3,1... | | `-- Installing compositeproto-0.4.2... | | `-- Extracting compositeproto-0.4.2: .... done | `-- Extracting libXcomposite-0.4.4_3,1: .......... done | `-- Installing libXi-1.7.6,1... | | `-- Installing inputproto-2.3.1... | | `-- Extracting inputproto-2.3.1: ..... done | `-- Extracting libXi-1.7.6,1: .......... done | `-- Installing libXrandr-1.5.0... | | `-- Installing randrproto-1.5.0... | | `-- Extracting randrproto-1.5.0: .... done | `-- Extracting libXrandr-1.5.0: .......... done | `-- Installing gdk-pixbuf2-2.32.3_1... | | `-- Installing jasper-1.900.1_16... | | `-- Installing jpeg-turbo-1.4.2... | | `-- Extracting jpeg-turbo-1.4.2: .......... done | | `-- Extracting jasper-1.900.1_16: .......... done | | `-- Installing libXt-1.1.5,1... | | `-- Installing libSM-1.2.2_3,1... | | | `-- Installing libICE-1.0.9_1,1... | | | `-- Extracting libICE-1.0.9_1,1: .......... done | | `-- Extracting libSM-1.2.2_3,1: .......... done | | `-- Extracting libXt-1.1.5,1: .......... done | | `-- Installing tiff-4.0.6_2... | | `-- Installing jbigkit-2.1_1... | | `-- Extracting jbigkit-2.1_1: .......... done | | `-- Extracting tiff-4.0.6_2: .......... done | `-- Extracting gdk-pixbuf2-2.32.3_1: .......... done | `-- Installing shared-mime-info-1.5... | `-- Extracting shared-mime-info-1.5: .......... done `-- Extracting gtk-update-icon-cache-2.24.29: .... done `-- Installing cups-2.1.4... | `-- Installing avahi-app-0.6.31_5... | | `-- Installing gnome_subr-1.0... | | `-- Extracting gnome_subr-1.0: . done | | `-- Installing gobject-introspection-1.46.0... | | `-- Installing python2-2_3... | | `-- Extracting python2-2_3: ...... done | | `-- Extracting gobject-introspection-1.46.0: .......... done | | `-- Installing gdbm-1.12... | | `-- Extracting gdbm-1.12: .......... done | | `-- Installing libdaemon-0.14_1... | | `-- Extracting libdaemon-0.14_1: .......... done | | `-- Installing dbus-glib-0.104... | | `-- Installing dbus-1.8.20... ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. | | `-- Extracting dbus-1.8.20: ......... done | | `-- Extracting dbus-glib-0.104: .......... done ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. | `-- Extracting avahi-app-0.6.31_5: .......... done | `-- Installing gnutls-3.4.15... | | `-- Installing nettle-3.2... | | `-- Installing gmp-5.1.3_3... | | `-- Extracting gmp-5.1.3_3: .......... done | | `-- Extracting nettle-3.2: .......... done | | `-- Installing ca_root_nss-3.27... | | `-- Extracting ca_root_nss-3.27: ....... done | | `-- Installing libtasn1-4.9... | | `-- Extracting libtasn1-4.9: .......... done | | `-- Installing trousers-0.3.13_1... | | `-- Installing tpm-emulator-0.7.4_1... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. | | `-- Extracting tpm-emulator-0.7.4_1: ......... done ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. | | `-- Extracting trousers-0.3.13_1: .......... done | | `-- Installing p11-kit-0.23.2... | | `-- Extracting p11-kit-0.23.2: .......... done | | `-- Installing libidn-1.33_1... | | `-- Extracting libidn-1.33_1: .......... done | `-- Extracting gnutls-3.4.15: .......... done | `-- Installing libpaper-1.1.24.4... | `-- Extracting libpaper-1.1.24.4: .......... done ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. `-- Extracting cups-2.1.4: .......... done `-- Installing python-2.7_2,2... `-- Extracting python-2.7_2,2: ..... done Extracting gtk2-2.24.29_2: .......... done Message from dejavu-2.35: Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Message from ca_root_nss-3.27: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from trousers-0.3.13_1: To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account ===> glurp-0.12.3_3 depends on shared library: libgtk-x11-2.0.so - found (/usr/local/lib/libgtk-x11-2.0.so) ===> Returning to build of glurp-0.12.3_3 ===> glurp-0.12.3_3 depends on shared library: libglade-2.0.so - not found ===> Installing existing package /packages/All/libglade2-2.6.4_8.txz Installing libglade2-2.6.4_8... `-- Installing xmlcatmgr-2.2_2... `-- Extracting xmlcatmgr-2.2_2: ......... done + Creating /usr/local/share/sgml/catalog + Registering CATALOG catalog.ports (SGML) + Creating /usr/local/share/sgml/catalog.ports + Creating /usr/local/share/xml/catalog + Registering nextCatalog catalog.ports (XML) + Creating /usr/local/share/xml/catalog.ports Extracting libglade2-2.6.4_8: .......... done Message from xmlcatmgr-2.2_2: The following catalogs are installed: 1) /usr/local/share/sgml/catalog The top level catalog for SGML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 2) /usr/local/share/sgml/catalog.ports This catalog is for handling SGML stuff installed under /usr/local/share/sgml. It is changed by ports/packages. 3) /usr/local/share/xml/catalog The top level catalog for XML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 4) /usr/local/share/xml/catalog.ports This catalog is for handling XML stuff installed under /usr/local/share/xml. It is changed by ports/packages. ===> glurp-0.12.3_3 depends on shared library: libglade-2.0.so - found (/usr/local/lib/libglade-2.0.so) ===> Returning to build of glurp-0.12.3_3 ===> glurp-0.12.3_3 depends on shared library: libxml2.so - found (/usr/local/lib/libxml2.so) ===> glurp-0.12.3_3 depends on shared library: libpango-1.0.so - found (/usr/local/lib/libpango-1.0.so) =========================================================================== =================================================== ===> Configuring for glurp-0.12.3_3 configure: loading site script /usr/ports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes /wrkdirs/audio/glurp/glurp-0.12.3/missing: Unknown `--run' option Try `/wrkdirs/audio/glurp/glurp-0.12.3/missing --help' for more information configure: WARNING: `missing' script is too old or missing checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether gmake sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by gmake... GNU checking for gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... gcc3 checking for library containing strerror... none required checking for gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ISO C89... (cached) none needed checking dependency style of cc... (cached) gcc3 checking for gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ISO C89... (cached) none needed checking dependency style of cc... (cached) gcc3 checking how to run the C preprocessor... cpp checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ANSI C header files... (cached) yes checking build system type... x86_64-portbld-dragonfly4.6 checking host system type... x86_64-portbld-dragonfly4.6 checking whether to enable debugging output... no checking pkg-config is at least version 0.9.0... yes checking for PACKAGE... yes configure: creating ./config.status config.status: creating Makefile config.status: creating pixmaps/Makefile config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands Configure finished, type `make' to build Glurp. =========================================================================== =================================================== ===> Building for glurp-0.12.3_3 gmake[1]: Entering directory '/wrkdirs/audio/glurp/glurp-0.12.3' gmake all-recursive gmake[2]: Entering directory '/wrkdirs/audio/glurp/glurp-0.12.3' Making all in src gmake[3]: Entering directory '/wrkdirs/audio/glurp/glurp-0.12.3/src' cc -DHAVE_CONFIG_H -I. -I.. -DDATA_DIR=\""/usr/local/share/glurp/"\" -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -I/usr/local/include/libmpd-1.0/ -Wall -I/usr/local/include -pipe -O2 -fno-strict-aliasing -MT conf.o -MD -MP -MF .deps/conf.Tpo -c -o conf.o conf.c cc -DHAVE_CONFIG_H -I. -I.. -DDATA_DIR=\""/usr/local/share/glurp/"\" -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -I/usr/local/include/libmpd-1.0/ -Wall -I/usr/local/include -pipe -O2 -fno-strict-aliasing -MT mpd-callbacks.o -MD -MP -MF .deps/mpd-callbacks.Tpo -c -o mpd-callbacks.o mpd-callbacks.c cc -DHAVE_CONFIG_H -I. -I.. -DDATA_DIR=\""/usr/local/share/glurp/"\" -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -I/usr/local/include/libmpd-1.0/ -Wall -I/usr/local/include -pipe -O2 -fno-strict-aliasing -MT gui.o -MD -MP -MF .deps/gui.Tpo -c -o gui.o gui.c cc -DHAVE_CONFIG_H -I. -I.. -DDATA_DIR=\""/usr/local/share/glurp/"\" -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -I/usr/local/include/libmpd-1.0/ -Wall -I/usr/local/include -pipe -O2 -fno-strict-aliasing -MT comm.o -MD -MP -MF .deps/comm.Tpo -c -o comm.o comm.c cc -DHAVE_CONFIG_H -I. -I.. -DDATA_DIR=\""/usr/local/share/glurp/"\" -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -I/usr/local/include/libmpd-1.0/ -Wall -I/usr/local/include -pipe -O2 -fno-strict-aliasing -MT gui-callbacks.o -MD -MP -MF .deps/gui-callbacks.Tpo -c -o gui-callbacks.o gui-callbacks.c gui-callbacks.c: In function 'on_ui_add_add_clicked': gui-callbacks.c:923:17: warning: variable 'tm' set but not used [-Wunused-but-set-variable] GtkTreeModel *tm; ^ gui-callbacks.c: In function 'on_ui_playlist_drag_drop': gui-callbacks.c:1073:8: warning: variable 'num_selected' set but not used [-Wunused-but-set-variable] gint num_selected; ^ gui-callbacks.c: In function 'on_menu_output_activate': gui-callbacks.c:1296:15: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] gint i, d = (gint)data; ^ conf.c: In function 'config_save': conf.c:214:14: warning: variable 'window_main' set but not used [-Wunused-but-set-variable] GtkWidget *window_main, *w; ^ mv -f .deps/conf.Tpo .deps/conf.Po cc -DHAVE_CONFIG_H -I. -I.. -DDATA_DIR=\""/usr/local/share/glurp/"\" -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -I/usr/local/include/libmpd-1.0/ -Wall -I/usr/local/include -pipe -O2 -fno-strict-aliasing -MT player.o -MD -MP -MF .deps/player.Tpo -c -o player.o player.c mv -f .deps/player.Tpo .deps/player.Po cc -DHAVE_CONFIG_H -I. -I.. -DDATA_DIR=\""/usr/local/share/glurp/"\" -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -I/usr/local/include/libmpd-1.0/ -Wall -I/usr/local/include -pipe -O2 -fno-strict-aliasing -MT keyboard.o -MD -MP -MF .deps/keyboard.Tpo -c -o keyboard.o keyboard.c In file included from /usr/local/include/glib-2.0/gobject/gobject.h:28:0, from /usr/local/include/glib-2.0/gobject/gbinding.h:29, from /usr/local/include/glib-2.0/glib-object.h:23, from gui.c:24: gui.c: In function 'populate_outputs_menu': gui.c:1161:87: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] g_signal_connect(G_OBJECT(item), "activate", G_CALLBACK(on_menu_output_activate), (gpointer)i); ^ /usr/local/include/glib-2.0/gobject/gsignal.h:475:73: note: in definition of macro 'g_signal_connect' g_signal_connect_data ((instance), (detailed_signal), (c_handler), (data), NULL, (GConnectFlags) 0) ^ mv -f .deps/comm.Tpo .deps/comm.Po cc -DHAVE_CONFIG_H -I. -I.. -DDATA_DIR=\""/usr/local/share/glurp/"\" -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -I/usr/local/include/libmpd-1.0/ -Wall -I/usr/local/include -pipe -O2 -fno-strict-aliasing -MT main.o -MD -MP -MF .deps/main.Tpo -c -o main.o main.c mv -f .deps/keyboard.Tpo .deps/keyboard.Po cc -DHAVE_CONFIG_H -I. -I.. -DDATA_DIR=\""/usr/local/share/glurp/"\" -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -I/usr/local/include/libmpd-1.0/ -Wall -I/usr/local/include -pipe -O2 -fno-strict-aliasing -MT support.o -MD -MP -MF .deps/support.Tpo -c -o support.o support.c mv -f .deps/mpd-callbacks.Tpo .deps/mpd-callbacks.Po cc -DHAVE_CONFIG_H -I. -I.. -DDATA_DIR=\""/usr/local/share/glurp/"\" -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -I/usr/local/include/libmpd-1.0/ -Wall -I/usr/local/include -pipe -O2 -fno-strict-aliasing -MT trayicon.o -MD -MP -MF .deps/trayicon.Tpo -c -o trayicon.o trayicon.c mv -f .deps/gui-callbacks.Tpo .deps/gui-callbacks.Po cc -DHAVE_CONFIG_H -I. -I.. -DDATA_DIR=\""/usr/local/share/glurp/"\" -I/usr/local/include/gtk-2.0 -I/usr/local/include/pango-1.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/freetype2 -I/usr/local/include/libdrm -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/gdk-pixbuf-2.0 -I/usr/local/include/atk-1.0 -D_THREAD_SAFE -pthread -I/usr/local/include/libmpd-1.0/ -Wall -I/usr/local/include -pipe -O2 -fno-strict-aliasing -MT traymenu.o -MD -MP -MF .deps/traymenu.Tpo -c -o traymenu.o traymenu.c mv -f .deps/trayicon.Tpo .deps/trayicon.Po mv -f .deps/traymenu.Tpo .deps/traymenu.Po mv -f .deps/support.Tpo .deps/support.Po mv -f .deps/main.Tpo .deps/main.Po mv -f .deps/gui.Tpo .deps/gui.Po cc -pipe -O2 -fno-strict-aliasing -export-dynamic -L/usr/local/lib -export-dynamic -o glurp conf.o mpd-callbacks.o gui.o comm.o gui-callbacks.o player.o keyboard.o main.o support.o trayicon.o traymenu.o -L/usr/local/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lpthread -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lfontconfig -lfreetype -Wl,--export-dynamic -lgmodule-2.0 -pthread -lmpd -lglib-2.0 -lintl gmake[3]: Leaving directory '/wrkdirs/audio/glurp/glurp-0.12.3/src' Making all in pixmaps gmake[3]: Entering directory '/wrkdirs/audio/glurp/glurp-0.12.3/pixmaps' gmake[3]: Nothing to be done for 'all'. gmake[3]: Leaving directory '/wrkdirs/audio/glurp/glurp-0.12.3/pixmaps' gmake[3]: Entering directory '/wrkdirs/audio/glurp/glurp-0.12.3' gmake[3]: Nothing to be done for 'all-am'. gmake[3]: Leaving directory '/wrkdirs/audio/glurp/glurp-0.12.3' gmake[2]: Leaving directory '/wrkdirs/audio/glurp/glurp-0.12.3' gmake[1]: Leaving directory '/wrkdirs/audio/glurp/glurp-0.12.3' =========================================================================== =================================================== =========================================================================== =================================================== ===> Staging for glurp-0.12.3_3 ===> Generating temporary packing list gmake[1]: Entering directory '/wrkdirs/audio/glurp/glurp-0.12.3' Making install in src gmake[2]: Entering directory '/wrkdirs/audio/glurp/glurp-0.12.3/src' gmake[3]: Entering directory '/wrkdirs/audio/glurp/glurp-0.12.3/src' test -z "/usr/local/bin" || /bin/mkdir -p "/wrkdirs/audio/glurp/stage/usr/local/bin" install -s -m 555 glurp '/wrkdirs/audio/glurp/stage/usr/local/bin' gmake[3]: Nothing to be done for 'install-data-am'. gmake[3]: Leaving directory '/wrkdirs/audio/glurp/glurp-0.12.3/src' gmake[2]: Leaving directory '/wrkdirs/audio/glurp/glurp-0.12.3/src' Making install in pixmaps gmake[2]: Entering directory '/wrkdirs/audio/glurp/glurp-0.12.3/pixmaps' gmake[3]: Entering directory '/wrkdirs/audio/glurp/glurp-0.12.3/pixmaps' gmake[3]: Nothing to be done for 'install-exec-am'. test -z "/usr/local/share/glurp/pixmaps" || /bin/mkdir -p "/wrkdirs/audio/glurp/stage/usr/local/share/glurp/pixmaps" install -m 0644 add.png config.png media-audiofile.png player-prev.png player-play.png player-pause.png player-stop.png player-next.png player-repeat.png player-random.png player-tabswitch.png online.png offline.png outputs.png playlist.png playlists.png remove.png condense.png '/wrkdirs/audio/glurp/stage/usr/local/share/glurp/pixmaps' gmake[3]: Leaving directory '/wrkdirs/audio/glurp/glurp-0.12.3/pixmaps' gmake[2]: Leaving directory '/wrkdirs/audio/glurp/glurp-0.12.3/pixmaps' gmake[2]: Entering directory '/wrkdirs/audio/glurp/glurp-0.12.3' gmake[3]: Entering directory '/wrkdirs/audio/glurp/glurp-0.12.3' gmake[3]: Nothing to be done for 'install-exec-am'. test -z "/usr/local/share/glurp" || /bin/mkdir -p "/wrkdirs/audio/glurp/stage/usr/local/share/glurp" install -m 0644 glurp.glade '/wrkdirs/audio/glurp/stage/usr/local/share/glurp' gmake[3]: Leaving directory '/wrkdirs/audio/glurp/glurp-0.12.3' gmake[2]: Leaving directory '/wrkdirs/audio/glurp/glurp-0.12.3' gmake[1]: Leaving directory '/wrkdirs/audio/glurp/glurp-0.12.3' ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===> Building package for glurp-0.12.3_3 file sizes/checksums [20]: . done packing files [20]: . done packing directories [0]: . done =========================================================================== => Cleaning up wrkdir ===> Cleaning for glurp-0.12.3_3 build of audio/glurp ended at Sat Oct 8 14:27:44 PDT 2016 build time: 00:01:26